EN ISO 15528:2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013)
Superseded date
10-08-2020
Superseded by
Published date
09-04-2013
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Sampling equipment
6 Sampling procedure
Bibliography
ISO 15528:2013 specifies procedures for the sampling of paints, varnishes and raw materials used in their manufacture. Such products include liquids and materials which, without undergoing chemical modification, are capable of being liquefied when heated up, and powdered, granulated and pasty materials. Samples may be taken from containers, e.g. cans, drums, tanks, tank wagons or ships' tanks, as well as from barrels, sacks, big-bags, silos or silo wagons, or from conveyor belts.ISO 15528:2013 does not deal with the sample preparation for testing or reduction of the samples thus taken. This is dealt with in ISO 1513.
| Committee |
CEN/TC 139
|
| DevelopmentNote |
Supersedes EN 21512 (10/2000)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 15528 : 2013 | Identical |
| ISO 15528:2013 | Identical |
| UNE-EN ISO 15528:2014 | Identical |
| NBN EN ISO 15528 : 2013 | Identical |
| NF EN ISO 15528 : 2013 | Identical |
| NEN EN ISO 15528 : 2013 | Identical |
| NS EN ISO 15528 : 2013 | Identical |
| I.S. EN ISO 15528:2013 | Identical |
| PN EN ISO 15528 : 2013 | Identical |
| SN EN ISO 15528 : 2013 | Identical |
| UNI EN ISO 15528 : 2014 | Identical |
| SS-EN ISO 15528 : 2013 | Identical |
| BS EN ISO 15528:2013 | Identical |
| DIN EN ISO 15528:2013-12 | Identical |
| PREN 927-10 : DRAFT 2017 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| 14/30299382 DC : 0 | BS ISO 23900-4 - PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 4: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF WHITE PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| BS EN 16640:2017 | Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method |
| S.R. CEN/TS 16499:2013 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| 12/30256100 DC : 0 | BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN 53150:2002-09 | PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD) |
| S.R. CEN/TS 16359:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| DIN EN 15794:2010-02 | Determination of explosion points of flammable liquids |
| BS EN 4704:2012 | Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
| BS EN 15794:2009 | Determination of explosion points of flammable liquids |
| I.S. EN 4593:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SOLAR ABSORPTANCE |
| DIN EN 16640:2015-09 (Draft) | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| I.S. EN 14522:2005 | DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS |
| 03/319412 DC : DRAFT NOV 2003 | EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| BS EN 16105:2011 | Paints and varnishes. Laboratory method for determination of release of substances from coatings in intermittent contact with water |
| BS EN 4159:2011 | Aerospace series. Paints and Varnishes. Determination of resistance to microbial growth |
| 02/123276 DC : DRAFT AUG 2002 | BS EN 1062-7 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 7: DETERMINATION OF CRACK BRIDGING PROPERTIES |
| PREN 4827 : DRAFT 2015 | AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 16785-1:2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| BS EN 4827:2017 | Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys |
| I.S. EN 4827:2017 | AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 16105:2011 | PAINTS AND VARNISHES - LABORATORY METHOD FOR DETERMINATION OF RELEASE OF SUBSTANCES FROM COATINGS IN INTERMITTENT CONTACT WITH WATER |
| I.S. EN ISO 4623-1:2002 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
| I.S. EN 16640:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| I.S. EN 927-3:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| BS EN 13578:2003 | Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete |
| ISO 15880:2000 | Paints, varnishes and binders — Determination of MEQ value of water-based coating materials and binders |
| BS EN 13062:2003 | Products and systems for the protection and repair of concrete structures. Test method. Determination of thixotropy of products for protection of reinforcement |
| BS EN 13900-2:2003 | Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling |
| I.S. EN 1062-3:2008 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
| DIN EN 13900-2:2003-06 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 2: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION IN PLASTICIZED POLYVINYL CHLORIDE BY TWO-ROLL MILLING |
| CEN/TS 16499:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood |
| EN 12802:2011 | Road marking materials - Laboratory methods for identification |
| EN 12617-1:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) |
| DIN EN ISO 15605:2004-11 | Adhesives - Sampling (ISO 15605:2000) |
| EN 1062-7:2004 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
| EN 13459:2011 | Road marking materials - Sampling from storage and testing |
| BS EN 13459:2011 | Road marking materials. Sampling from storage and testing |
| UNI EN 4171 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF PHOSPHORIC ACID INDEX |
| I.S. EN 13900-2:2003 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 2: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION IN PLASTICIZED POLYVINYL CHLORIDE BY TWO-ROLL MILLING |
| 12/30271191 DC : 0 | BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 10/30218101 DC : 0 | BS EN 16105 - PAINTS AND VARNISHES - LEACHING OF SUBSTANCES FROM COATINGS - LABORATORY IMMERSION METHOD |
| DIN EN 13459:2011-12 | ROAD MARKING MATERIALS - SAMPLING FROM STORAGE AND TESTING |
| 14/30299379 DC : 0 | BS ISO 23900-3 - PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 3: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF BLACK AND COLOUR PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| BS EN 4171:2011 | Aerospace series. Paints and varnishes. Test method for determination of phosphoric acid index |
| PREN 4704 : 200P1 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| I.S. EN 4171:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF PHOSPHORIC ACID INDEX |
| I.S. EN 4704:2012 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| UNI CEN/TS 16499 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| NF EN 16105 : 2011 | PAINTS AND VARNISHES - LABORATORY METHOD FOR DETERMINATION OF RELEASE OF SUBSTANCES FROM COATINGS IN INTERMITTENT CONTACT WITH WATER |
| UNI EN 15794 : 2009 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| DIN EN 12802:2011-12 | Road marking materials - Laboratory methods for identification |
| DIN EN 927-3:2012-10 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| BS EN ISO 15605:2004 | Adhesives. Sampling |
| ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
| I.S. EN 12802:2011 | ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
| DIN EN 1240:2011-07 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| DIN EN 13578:2004-03 | Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete; German version EN 13578:2003 |
| I.S. EN 1240:2011 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| DIN EN 12878:1999-09 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| I.S. EN 12878:2014 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 13062:2003-09 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THIXOTROPY OF PRODUCTS FOR PROTECTION OF REINFORCEMENT |
| UNI EN 12878 : 2014 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 16640:2017-08 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| I.S. EN 4159:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO MICROBIAL GROWTH |
| 17/30364786 DC : 0 | BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 17/30364312 DC : 0 | BS EN 927-10 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| UNI EN 4593 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SOLAR ABSORPTANCE |
| 14/30304809 DC : 0 | BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| BS EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| BS EN ISO 4623-1:2002 | Paints and varnishes. Determination of resistance to filiform corrosion Steel substrates |
| I.S. EN 13459:2011 | ROAD MARKING MATERIALS - SAMPLING FROM STORAGE AND TESTING |
| EN ISO 787-14:2002 | General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002) |
| I.S. EN 60464-2:2002 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| DIN EN 12878:2014-07 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 12617-1:2003-11 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LINEAR SHRINKAGE FOR POLYMERS AND SURFACE PROTECTION SYSTEMS (SPS) |
| DIN EN ISO 2815:2003-10 | PAINTS AND VARNISHES - BUCHHOLZ INDENTATION TEST |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| BS EN ISO 6744-2:2004 | Binders for paints and varnishes. Alkyd resins Determination of phthalic anhydride content |
| BS EN 12617-1:2003 | Products and systems for the protection and repair of concrete structures. Test methods Determination of linear shrinkage for polymers and surface protection systems (SPS) |
| UNE-EN 16640:2017 | Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method. (Consolidated version) |
| DIN EN ISO 7253:2002-04 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| UNE-EN 927-3:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| UNI EN 1062-3 : 2008 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
| UNI EN 1240 : 2011 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| UNI EN 12802 : 2011 | ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
| PREN 12878 : DRAFT 2012 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| I.S. EN ISO 15605:2004 | ADHESIVES - SAMPLING |
| I.S. EN 13900-4:2004 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 4: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF WHITE PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| UNI EN 13459 : 2011 | ROAD MARKING MATERIALS - SAMPLING FROM STORAGE AND TESTING |
| BS EN 4593:2011 | Aerospace series. Paints and varnishes. Determination of solar absorptance |
| 06/30096144 DC : 0 | EN 998-3 - SPECIFICATION FOR MORTAR FOR MASONRY - PART 3: RENDERING AND PLASTERING MORTAR WITH ORGANIC POLYMER BINDING AGE |
| UNI CEN/TS 16359 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| BS 3900-F20(2004) : 2004 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES |
| PD CEN/TS 16359:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of knot staining resistance of wood coatings |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| 08/30176860 DC : DRAFT APR 2008 | BS EN 15794 - DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| 02/122184 DC : DRAFT MAY 2002 | PREN 14469-3 - PIGMENTS AND EXTENDERS - TESTING OF COLOURING MATERIALS IN PLASTICIZED POLYVINYL CHLORIDE (PVC-P) - PART 3: DETERMINATION OF THE RELATIVE TINTING STRENGTH OF WHITE PIGMENTS |
| BS EN 16785-1:2015 | Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| 14/30299376 DC : 0 | BS ISO 23900-2 - PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 2: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION IN PLASTICIZED POLYVINYL CHLORIDE BY TWO-ROLL MILLING |
| UNE-EN 16785-1:2016 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| 15/30326869 DC : 0 | BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| UNI EN 4160 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
| ISO 4623-1:2000 | Paints and varnishes Determination of resistance to filiform corrosion Part 1: Steel substrates |
| BS EN ISO 787-14:2002 | General methods of test for pigments and extenders Determination of resistivity of aqueous extract |
| UNI EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| I.S. EN 15794:2009 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| DIN EN 13900-4:2004-07 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 4: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF WHITE PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| BS EN 1062-7:2004 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of crack bridging properties |
| BS EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| BS EN ISO 15880:2004 | Paints, varnishes and binders. Determination of MEQ value of water-based coating materials and binders |
| BS EN 12802:2011 | Road marking materials. Laboratory methods for identification |
| BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| BS EN 927-3:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood Natural weathering test |
| BS EN 13529:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack |
| BS EN 13900-3:2003 | Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling |
| ISO 15605:2000 | Adhesives Sampling |
| BS EN 14469-3:2004 | Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Determination of the relative tinting strength of white pigments |
| BS EN 1240:1998 | Adhesives. Determination of hydroxyl value and/or hydroxyl content |
| BS EN ISO 6744-4:2004 | Binders for paints and varnishes. Alkyd resins Determination of fatty acid content |
| BS EN ISO 6744-3:2004 | Binders for paints and varnishes. Alkyd resins Determination of unsaponifiable matter content |
| ISO 6744-2:1999 | Binders for paints and varnishes — Alkyd resins — Part 2: Determination of phthalic anhydride content |
| BS EN 1062-3:2008 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of liquid water permeability |
| BS EN 13900-4:2004 | Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling |
| UNE-EN 12802:2012 | Road marking materials - Laboratory methods for identification |
| BS EN 1062-6:2002 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of carbon dioxide permeability |
| EN 4593:2011 | Aerospace series - Paints and varnishes - Determination of solar absorptance |
| EN ISO 1516:2002 | Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002) |
| EN 4827:2017 | Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys |
| EN 13900-2:2003 | Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling |
| EN 927-3:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| EN ISO 15880:2004 | Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000) |
| EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| EN ISO 6744-2:2004 | Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999) |
| EN 16105:2011 | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
| EN 4171:2011 | Aerospace series - Paints and varnishes - Test method for determination of phosphoric acid index |
| EN 13900-4:2004 | Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling |
| EN 14469-3:2004 | Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments |
| EN ISO 6744-3:2004 | Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999) |
| EN 4704:2012 | Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
| EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN 4160:2011 | Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure |
| EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| EN 14469-2:2004 | Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens |
| EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| EN ISO 6744-4:2004 | Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999) |
| EN ISO 2815:2003 | Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| EN 4159:2011 | Aerospace series - Paints and varnishes - Determination of resistance to microbial growth |
| EN 15794:2009 | Determination of explosion points of flammable liquids |
| EN ISO 787-13:2002 | General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulfates, chlorides and nitrates (ISO 787-13:2002) |
| 02/122183 DC : DRAFT MAY 2002 | BS EN 14469-2 - PIGMENTS AND EXTENDERS - TESTING OF COLOURING MATERIALS IN PLASTICIZED POLYVINYL CHLORIDE (PVC-P) - PART 2: PREPARATION OF TEST SPECIMENS |
| DIN EN 16640 E : 2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| I.S. EN 13900-3:2003 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 3: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF BLACK AND COLOUR PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| DIN EN 16785-1:2016-03 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| DIN EN 16105:2011-12 | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
| 11/30237910 DC : 0 | BS EN 927-3 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| BS EN 4160:2011 | Aerospace series. Paints and varnishes. Determination of the effect of thermal exposure |
| PD CEN/TS 16499:2013 | Paints and varnishes. Coating materials and coating systems for exterior wood. Resistance to blocking of paints and varnishes on wood |
| UNI EN 16105 : 2011 | PAINTS AND VARNISHES - LABORATORY METHOD FOR DETERMINATION OF RELEASE OF SUBSTANCES FROM COATINGS IN INTERMITTENT CONTACT WITH WATER |
| DIN EN 15824:2015-11 (Draft) | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| 10/30215608 DC : 0 | BS EN 4704 - AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODISING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| UNI EN 4159 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO MICROBIAL GROWTH |
| I.S. EN 4160:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
| ISO 787-14:2002 | General methods of test for pigments and extenders Part 14: Determination of resistivity of aqueous extract |
| PREN 927-3 : DRAFT 2011 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| UNE-EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| UNI EN 4704 : 2013 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| EN ISO 4623-1:2002 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2000) |
| UNE-EN 16105:2012 | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
| UNE-EN 13459:2012 | Road marking materials - Sampling from storage and testing |
| I.S. EN 15824:2017 | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| DIN EN 13529:2003-12 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - RESISTANCE TO SEVERE CHEMICAL ATTACK |
| DIN EN 1062-3:2008-04 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
| DIN EN 1062-7:2004-08 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
| ISO 787-13:2002 | General methods of test for pigments and extenders Part 13: Determination of water-soluble sulfates, chlorides and nitrates |
| ISO 6744-3:1999 | Binders for paints and varnishes — Alkyd resins — Part 3: Determination of unsaponifiable matter content |
| BS EN ISO 787-13:2002 | General methods of test for pigments and extenders Determination of water-soluble sulfates, chlorides and nitrates |
| BS EN ISO 1523:2002 | Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
| BS EN ISO 2815:2003 | Paints and varnishes. Buchholz indentation test |
| BS EN ISO 1516:2002 | Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method |
| BS EN 14469-2:2004 | Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Preparation of test specimens |
| BS EN ISO 3262-22:2001 | Extenders for paints. Specifications and methods of test Flux-calcined kieselguhr |
| EN 13529:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
| EN ISO 15605:2004 | Adhesives - Sampling (ISO 15605:2000) |
| DIN EN ISO 6744-4:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999) |
| DIN EN 13900-3:2003-06 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 3: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF BLACK AND COLOUR PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| DIN EN 15824:2017-09 | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| DIN EN ISO 787-13:2002-02 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 13: DETERMINATION OF WATER-SOLUBLE SULFATES, CHLORIDES AND NITRATES |
| EN 1062-6:2002 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
| EN 1240:2011 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| EN 13062:2003 | Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement |
| EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
| EN 13578:2003 | Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete |
| DIN EN ISO 15880:2004-09 | Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000) |
| DIN EN 14522:2005-12 | Determination of the auto ignition temperature of gases and vapours |
| DIN EN ISO 6744-3:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999) |
| CEN/TS 16359:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of knot staining resistance of wood coatings |
| DIN EN ISO 6744-2:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999) |
| BS 3900-E10(2003) : 2003 | PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION |
| BS 3900-F13(2002) : 2002 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
| BS 3900-E1(2002) : 2002 | PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 6206:1979 | Chemical products for industrial use — Sampling — Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.