EN ISO 10079-3:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014)
06-23-2022
05-07-2014
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Cleaning, disinfection and sterilization
6 Design requirements
7 Operational requirements
8 Physical requirements for field and
transport use suction equipment
9 Performance requirements for vacuum
level and flowrate
10 Resistance to environment of suction equipment
for field and/or transport use
11 Marking
12 Information to be supplied by the
manufacturer
Annex A (normative) - Test methods
Annex B (informative) - Rationale statement
Annex C (informative) - Lumen size and its effect
on flowrate
Annex D (informative) - Schematic of suction
equipment
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 93/42/EEC
ISO 10079-3:2014 specifies safety and performance requirements for medical suction equipment powered from a vacuum or positive pressure gas source generating venturi suction. It applies to equipment connected to medical gas pipeline systems or cylinders and venturi attachments. The equipment can be stand-alone or part of an integrated system.
| Committee |
CEN/TC 215
|
| DevelopmentNote |
Supersedes PREN ISO 10079-3. (05/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 10079-3:2000-03 | Identical |
| ONORM EN ISO 10079-3 : 2014 | Identical |
| UNI EN ISO 10079-3 : 2014 | Identical |
| ISO 10079-3:2014 | Identical |
| I.S. EN ISO 10079-3:2014 | Identical |
| NS EN ISO 10079-3 : 2014 | Identical |
| BS EN ISO 10079-3:2014 | Identical |
| NF EN ISO 10079-3 : 2014 | Identical |
| NEN EN ISO 10079-3 : 2014 | Identical |
| UNE-EN ISO 10079-3:2014 | Identical |
| PN EN ISO 10079-3 : 2014 | Identical |
| DIN EN ISO 10079-3:2014-09 | Identical |
| NBN EN ISO 10079-3 : 2014 | Identical |
| SN EN ISO 10079-3:2014 | Identical |
| I.S. EN 740:1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| 12/30266576 DC : 0 | BS EN 13718-2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES |
| EN 13718-2:2015 | Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances |
| BS 5724-2.204(1999) : 1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| DIN EN 1789:2014-12 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| DIN EN 13718-2:2015-05 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| UNE-EN 13718-2:2015 | Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances |
| I.S. EN 1789:2007 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| EN 1789:2007+A2:2014 | Medical vehicles and their equipment - Road ambulances |
| EN 738-4:1998/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT |
| EN 738-1:1997/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES |
| I.S. EN 738-2:1999 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - MANIFOLD AND LINE - PRESSURE REGULATORS |
| BS EN 1789 : 2007 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| UNE-EN 1789:2007 | Medical vehicles and their equipment - Road ambulances |
| BS EN 13718-2:2015 | Medical vehicles and their equipment. Air ambulances Operational and technical requirements for air ambulances |
| I.S. EN 13718-2:2015 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| I.S. EN 13718-2:2015+A1:2020 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| EN 738-2 : 1998 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - MANIFOLD AND LINE - PRESSURE REGULATORS |
| I.S. EN 738-4:1999 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT |
| UNI EN 1789 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| ISO 8836:2014 | Suction catheters for use in the respiratory tract |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| IEC 60601-1-6:2010+AMD1:2013 CSV | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| ISO 10651-4:2002 | Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators |
| ISO 10079-1:2015 | Medical suction equipment Part 1: Electrically powered suction equipment |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| EN 1041:2008+A1:2013 | Information supplied by the manufacturer of medical devices |
| ISO 10079-2:2014 | Medical suction equipment Part 2: Manually powered suction equipment |
| CGA V 5 : 2008(R2013) | DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS) |
| ISO 14155:2011 | Clinical investigation of medical devices for human subjects Good clinical practice |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 10524-1:2006 | Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.