EN IEC 62246-1-1:2018
Current
The latest, up-to-date edition.
Reed switches - Part 1-1: Generic specification - Blank detail specification
04-06-2018
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Test schedules
5 Characteristic values of the reed switches
6 Marking and documentation
7 Preparation of blank detail and detail specification
Annex A (normative) - Mounting in a standard coil
Annex B (normative) - Variants
Annex C (informative) - Typical applications
Annex D (informative) - Examples of blank detail and
detail specifications
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC 62246-1-1:2018 is a blank detail specification which defines requirements and tests for reed switches for use in general and industrial applications.This document is intended to be used in conjunction with IEC 62246-1:2015 and specific products standards applying as switching elements.This document selects from IEC 62246-1:2015 and from other sources the appropriate test procedures to be used in detail specifications derived from this specification.Reed switch types are specified depending on characteristic values including functional ratings for safety and tests.This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous editions:a) update of the scope, references and terms and definitions;b) inclusion of guidelines for the preparation of blank detail and detail specifications;c) update of characteristics values including functional ratings for safety;d) update of the quality conformance inspection procedures;e) update of typical applications.
| Committee |
CLC/SR 94
|
| DevelopmentNote |
Supersedes & Redesignates EN 62246-1-1. (04/2018)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN IEC 62246-1-1:2018 | Identical |
| CEI EN IEC 62246-1-1 : 2018 | Identical |
| OVE EN IEC 62246-1-1 : 2019 | Identical |
| NEN-EN-IEC 62246-1-1:2018 | Identical |
| NF EN IEC 62246-1-1 : 2018 | Identical |
| PN-EN IEC 62246-1-1:2018 | Identical |
| SN EN IEC 62246-1-1:2018 | Identical |
| SS-EN IEC 62246-1-1:2018 | Identical |
| IEC 62246-1-1:2018 | Identical |
| BS EN IEC 62246-1-1:2018 | Identical |
| IEC 62246-1:2015 | Reed switches - Part 1: Generic specification |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| EN 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| EN 61810-2-1:2017 | Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60068-2-13:1983 | Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| EN 62246-1:2015 | Reed switches - Part 1: Generic specification |
| IEC 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| IEC 61810-1:2015 | Electromechanical elementary relays - Part 1: General and safety requirements |
| EN 60127-2:2014 | Miniature fuses - Part 2: Cartridge fuse-links |
| EN 61810-2:2017 | Electromechanical elementary relays - Part 2: Reliability |
| IEC 60127-2:2014 | Miniature fuses - Part 2: Cartridge fuse-links |
| IEC 61810-2:2017 | Electromechanical elementary relays - Part 2: Reliability |
| IEC 61810-2-1:2017 | Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B<sub>10</sub> values |
| EN 60068-2-17:1994 | Environmental testing - Part 2: Tests - Test Q: Sealing |
| IEC 60068-2-17:1994 | Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
| EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| ISO 22201-2:2013 | Lifts (elevators), escalators and moving walks Programmable electronic systems in safety related applications Part 2: Escalators and moving walks (PESSRAE) |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60947-5-2:2007+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches |
| IEC 61811-1:2015 | Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification |
| EN 60068-2-11:1999 | Environmental testing - Part 2: Tests - Test Ka: Salt mist |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| ISO 22201:2009 | Lifts (elevators) Design and development of programmable electronic systems in safety-related applications for lifts (PESSRAL) |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.