Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics

Superseded date

11-01-2010

Superseded by

EN ISO 4414:2010

Published date

09-10-2008

Publisher

Comite Europeen de Normalisation

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 List of hazards
5 Safety requirements and/or measures
  5.1 Basic requirements for the design and specification of
      pneumatic systems
  5.2 Additional requirements
      5.2.1 Site conditions
      5.2.2 Component removal
      5.2.3 Preparation for transportation
  5.3 Specific requirements for components and controls
      5.3.1 Motors and rotary actuators
      5.3.2 Cylinders
      5.3.3 Valves
      5.3.4 Energy transmission and conditioning
      5.3.5 System protection
      5.3.6 Sequence control
      5.3.7 Control systems with servo or proportional valves
      5.3.8 Silencers
6 Verification of safety requirements and/or measures
  6.1 Inspection
  6.2 Testing
7 Information for use
  7.1 Final data
  7.2 Maintenance data
  7.3 Marking
      7.3.1 Components
      7.3.2 Components within a system
      7.3.3 Ports
      7.3.4 Valve control mechanisms
      7.3.5 Internal devices
Annex A (informative) Bibliography
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC
Annex ZB (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC

This standard applies to pneumatic systems and their components on machinery. It identifies hazards and factors which affect the safety of systems and their components when they are put to their intended use.Gas bottles and receivers are excluded from the scope of this standard. For receivers see EN 286-1.The principles specified apply to the design, construction and modification of new systems and their components and aspects of use including:- Assembly- Installation- Adjustment- Operation- Cleaning- Maintenance.Components are covered in the standard but only to the extent that safety requirements are given to allow the components to be safely integrated into a system's design.The standard applies to systems and their components on machinery that are manufactured after the date of the adoption of this standard.

Committee	CEN/TC 114
DevelopmentNote	1996 Edition Re-Issued in September 2008 & incorporates AMD 1 2008. (10/2008)
DocumentType	Standard
PublisherName	Comite Europeen de Normalisation
Status	Superseded
SupersededBy	EN ISO 4414:2010

Standards	Relationship
BS EN 983 : 1996	Identical
UNE-EN 983:1996	Identical
NF EN 983 : 1996 + A1 2008	Identical
UNI EN 983 : 2009	Identical
SN EN 983 : 1997 + A1 2008	Identical
DIN EN 983:2009-06	Identical
NEN EN 983 : 1997 + A1 2008	Identical
PN EN 983 : 1999 + A1 2008	Identical
NBN EN 983 : 96 + A1 2009	Identical
NS EN 983 : 1996 + A1 2008	Identical
I.S. EN 983:1996	Identical
DIN EN 983:1996-09	Identical
UNE-EN 983:1996+A1:2008	Identical

PREN 1808 : DRAFT 2011	SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
11/30236570 DC : 0	BS EN 16228-6 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
UNI EN ISO 11148-2 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
DIN EN 15162:2008-10	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
BS EN ISO 11148-11:2011	Hand-held non-electric power tools. Safety requirements Nibblers and shears
04/30106849 DC : DRAFT MAY 2004	EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
I.S. EN 12415:2000	SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
DIN EN 15166:2010-02	Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
BS EN 15166:2008	Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
I.S. EN 12445:2000	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - TEST METHODS
BS EN 415-8:2008	Safety of packaging machines Strapping machines
03/306044 DC : DRAFT APR 2003	BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
02/711111 DC : DRAFT SEP 2002	PREN 415-7 - PACKAGING MACHINES SAFETY - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
10/30233949 DC : 0	BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
DIN EN ISO 11148-9:2012-06	Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
03/119040 DC : DRAFT NOV 2003	PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
05/30131998 DC : 0	BS EN 15180 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
09/30202532 DC : 0	BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS EN 13035-7 : 2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
10/30232422 DC : DRAFT DEC 2010	BS EN 1870-9 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
09/30201995 DC : 0	BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
02/710618 DC : DRAFT SEP 2002	BS EN 13852-2 - CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES
10/30185766 DC : 0	BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
13/30273033 DC : 0	BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
I.S. EN 13128:2001	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
I.S. EN 14070:2003	SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
BS EN ISO 11148-10:2011	Hand-held non-electric power tools. Safety requirements Compression power tools
11/30237569 DC : 0	BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
03/313810 DC : 0	EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
97/720419 DC : DRAFT DEC 1997	PREN 1009-3 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 3: CRUSHING AND MILLING MACHINERY
BS EN 13035-1:2008	Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment inside the factory
00/706811 DC : DRAFT MAR 2000	BS EN 13870 - FOOD PROCESSING MACHINERY - CHOP CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
05/30130669 DC : DRAFT MAR 2005	BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
02/709474 DC : DRAFT JULY 2002	BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN 15093:2008	Safety of machinery. Safety requirements for hot flat rolling mills
09/30180290 DC : 0	BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
09/30197984 DC : 0	BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
BS EN 14753:2007	Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
BS EN 13035-11 : 2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
08/30177210 DC : DRAFT MAY 2008	BS EN 13021 AMD1 - WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
09/30187535 DC : 0	BS EN 13000 - CRANES - MOBILE CRANES
NF EN 13035-5 : 2006 + A1 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
I.S. EN ISO 11148-2:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011)
I.S. EN 14753:2007	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
I.S. EN 12649:2008	CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
I.S. EN ISO 11148-10:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011)
PREN 1870-12 : DRAFT 2011	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
I.S. EN ISO 11148-8:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011)
I.S. EN 13000:2010	Cranes - Mobile cranes
I.S. EN 15061:2007	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
BS EN 12453:2001	Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements
I.S. EN 1114-3:2001	RUBBER AND PLASTICS MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
DIN EN 792-8:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
DIN EN 12409:2011-12	Plastics and rubber machines - Thermoforming machines - Safety requirements
DIN EN 415-7:2009-12	Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
DIN EN 13288:2010-10	Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 415-5:2010-04	Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009)
DIN EN 13355:2010-06	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN 12978:2009-10	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
DIN EN 1034-14:2010-07	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter (includes Amendment A1:2009)
DIN EN 13019:2009-04	Machines for road surface cleaning - Safety requirements (includes Amendment A1:2008)
DIN EN 13591:2010-10	Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 13675:2010-10	Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010)
DIN EN 1760-3:2009-07	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
DIN EN 12653:2010-06	Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements (includes Amendment A2:2009)
DIN EN 13570:2011-02	Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 792-1:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
DIN EN 792-7:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
DIN EN 792-5:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
BS EN 12203 : 2003	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
BS EN 13457 : 2004	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
BS EN 13035-3 : 2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
BS EN 1493:2010	Vehicle lifts
BS EN 13042-3 : 2007	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
UNE-EN 13977:2012	Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
BS EN 12855 : 2003	FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1398:2009	Dock levellers. Safety requirements
BS EN 792-10 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
BS EN 13128 : 2001	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
BS EN 12984 : 2005	FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 792-2 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
BS EN 12312-18 : 2005	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS
BS EN 954-1:1997	Safety of machinery. Safety related parts of control systems General principles for design
BS EN 13000 : 2010	CRANES - MOBILE CRANES
BS EN 792-4 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
DIN EN 13042-1:2010-04	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder (includes Amendment A1:2009)
BS EN 1679-1 : 1998	RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
BS EN 12622 : 2009	SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
BS EN 12409 : 2008	PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
BS EN 13218 : 2002	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
BS EN 1035:1999	Tannery machines. Moving platen machinery. Safety requirements
BS EN 1034-1 : 2000	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS
BS EN 12387 : 2005	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 13977:2011	RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
I.S. EN 13570:2005	FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1570:1998-08	SAFETY REQUIREMENTS FOR LIFTING TABLES
EN 12203:2003+A1:2009	Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
EN 13102:2005+A1:2008	Ceramic machines - Safety - Loading and unloading of fine clay tiles
EN 13035-2:2008	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
DIN EN 14070:2009-07	SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
EN 1034-5:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
UNE-EN 972:1999	TANNERY MACHINES. RECIPROCATING ROLLER MACHINES. SAFETY REQUIREMENTS.
EN 12044:2005+A1:2009	Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
EN 1010-5:2005	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board
EN 12653:1999+A2:2009	Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
EN 1010-1:2004+A1:2010	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
DIN EN 1114-3:2010-01	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
EN 13112:2002+A1:2009	Tannery machines - Splitting and bandknife shearing machines - Safety requirements
EN 12151:2007	Machinery and plants for the preparation of concrete and mortar - Safety requirements
CEN/TS 13778:2004	Mobile demolition machinery - Safety requirements
EN 1034-6:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
DIN EN 1114-2:2010-01	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
EN 12445:2000	Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods
EN 1218-3:2001+A1:2009	Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
DIN EN 982:2009-06	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
EN 12336:2005+A1:2008	Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
EN 13135-2:2004+A1:2010	Cranes - Equipment - Part 2: Non-electrotechnical equipment
EN 12717:2001+A1:2009	Safety of machine tools - Drilling machines
EN 13035-7:2006+A1:2009	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
EN 12621:2006+A1:2010	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
NF EN 201 : 2009	PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
EN 13114:2002+A1:2009	Tannery machines - Rotating process vessels - Safety requirements
EN 1248:2001+A1:2009	Foundry machinery - Safety requirements for abrasive blasting equipment
EN 12409:2008+A1:2011	Plastics and rubber machines - Thermoforming machines - Safety requirements
EN 13021:2003+A1:2008	Winter service machines - Safety requirements
NF EN 1218-1 : 2000 + A1 2009	SAFETY OF WOOD WORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
EN 13035-6:2006+A1:2009	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out
EN 1114-2:1998+A1:2008	Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
EN 13113:2002+A1:2010	Tannery machines - Roller coating machines - Safety requirements
EN 12478:2000/AC:2001	SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
EN 12921-1:2005+A1:2010	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 12215:2004+A1:2009	Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
UNI EN 415-3 : 2010	SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
EN 12757-1:2005+A1:2010	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 12312-18:2005+A1:2009	Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units
EN 12622:2009+A1:2013	Safety of machine tools - Hydraulic press brakes
EN 13355:2004+A1:2009	Coating plants - Combined booths - Safety requirements
EN 1218-4:2004+A2:2009	Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)
EN 12649:2008+A1:2011	Concrete compactors and smoothing machines - Safety
EN 1034-13:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
EN 13457:2004+A1:2010	Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements
EN 13042-1:2007+A1:2009	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
UNI EN 1034-1 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
EN 1034-7:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
EN 13042-3:2007+A1:2009	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
EN 12855:2003+A1:2010	Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements
EN 1034-2:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
UNI EN 1218-1 : 2009	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
DIN EN ISO 11148-11:2012-06	Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
DIN EN ISO 11148-12:2013-05	Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
03/109865 DC : DRAFT JULY 2003	BS EN 415-6 - PACKAGING MACHINES SAFETY - PART 6: PALLET WRAPPING MACHINES
11/30237566 DC : 0	BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
BS EN 1501-3:2008	Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles
08/30177207 DC : DRAFT MAY 2008	BS EN 13019 AMD1 - MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
BS EN ISO 11148-1:2011	Hand-held non-electric power tools. Safety requirements Assembly power tools for non-threaded mechanical fasteners
I.S. EN 12840:2001	SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
04/19993045 DC : 0	EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
UNI EN 13035-5 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
I.S. EN 1870-2:1999	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
UNI EN ISO 11148-1 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
BS EN ISO 11148-12:2012	Hand-held non-electric power tools. Safety requirements Circular, oscillating and reciprocating saws
EN 1218-5:2004+A1:2009	Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain
UNI EN 13035-11 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
I.S. EN 792-9:2001	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
06/30156494 DC : 0	BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
I.S. EN 1010-5:2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD
08/30183842 DC : DRAFT JUNE 2008	BS EN ISO 11148-6 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
BS EN 15162:2008	Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws
09/30198762 DC : 0	BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
13/30291469 DC : 0	BS EN 13870 - FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
08/30183838 DC : DRAFT JUNE 2008	BS EN ISO 11148-4 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
03/306594 DC : DRAFT APR 2003	BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE
11/30236548 DC : 0	BS EN 474-1:2006/A3 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
05/19981951 DC : 0	BS EN 1034-13 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: AUXILIARY EQUIPMENT FOR DE-WIRING BALES AND UNITS
CEI EN 50308 : 2005	WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
11/30237557 DC : 0	BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
10/30233953 DC : 0	BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
03/306593 DC : DRAFT APR 2003	BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
DIN EN 15093:2009-06	Safety of machinery - Safety requirements for hot flat rolling mills
I.S. EN 12151:2007	MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
BS EN ISO 8230-1:2008	Safety requirements for dry-cleaning machines Common safety requirements
DIN EN 15164:2008-09	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
02/710617 DC : 0	BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
PREN 1870-11 : DRAFT 2011	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
BS EN ISO 11148-5:2011	Hand-held non-electric power tools. Safety requirements Rotary percussive drills
UNI EN 15093 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
PREN 1889-1 : DRAFT 2010	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
UNI EN ISO 10821 : 2010	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
11/30235009 DC : 0	BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
UNI EN ISO 11148-5 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
UNI EN ISO 11148-6 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
04/102838 DC : DRAFT JAN 2004	EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
99/707963 DC : DRAFT MAY 1999	PREN 12312-18 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: OXYGEN/NITROGEN UNITS
11/30234386 DC : 0	BS EN 1808 - SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
08/30187719 DC : 0	BS EN 1493 - VEHICLE LIFTS
EN 13000:2010+A1:2014	Cranes - Mobile cranes
03/118895 DC : 0	EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
09/30187371 DC : 0	BS ISO 11148-1 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
PREN 12453 : DRAFT 2014	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS
04/301783 DC : DRAFT JAN 2004	EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
I.S. EN 15093:2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
05/19981971 DC : 0	BS EN 1034-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
PREN 15746-2 : DRAFT 2015	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
00/715016 DC : DRAFT OCT 2000	PREN 13977 - RAILWAY APPLICATIONS - TRACK - PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
DIN EN ISO 11148-8:2012-06	Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
I.S. EN 15164:2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
I.S. EN 15746-2:2010	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS EN 15061 : 2007	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
BS EN 13035-5 : 2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
I.S. EN 13035-1:2008	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
I.S. EN 14492-2:2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 1398:2009-07	DOCK LEVELLERS - SAFETY REQUIREMENTS
DIN EN 1010-1:2011-06	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 12215:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 746-1:2010-02	Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009)
DIN EN 12387:2010-03	Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009)
DIN EN 1777:2010-06	Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
DIN EN 13000:2014-11	CRANES - MOBILE CRANES
DIN EN 13114:2010-03	Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009)
DIN EN 1807:2010-02	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 13128:2009-09	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
DIN EN 13021:2009-04	Winter service machines - Safety requirements (includes Amendment A1:2008)
DIN EN 1493:2011-02	Vehicle lifts
DIN EN 12621:2011-07	Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 12957:2009-07	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
DIN EN 13112:2011-03	Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009)
DIN EN 12984:2011-02	Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12203:2010-07	Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009
DIN EN 1012-1:2011-02	Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
DIN EN 12855:2011-02	Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN ISO 10472-4:2009-09	Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)
DIN EN 12417:2009-07	MACHINE TOOLS - SAFETY - MACHINING CENTRES
DIN EN 12581:2011-02	Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
DIN EN 12981:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 13102:2009-05	CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
DIN EN 1218-1:2010-02	Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009)
DIN EN 792-12:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS
DIN EN 869:2009-12	Safety of machinery - Safety requirements for pressure metal diecasting units (includes Amendment A1:2009)
DIN EN 14681:2010-10	Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
DIN EN 693:2011-11	MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
DIN EN 15027:2010-03	Transportable wall saw and wire saw equipment for job site - Safety (includes Amendment A1:2009)
DIN EN 13042-3:2010-05	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (includes Amendment A1:2009)
DIN EN 13035-4:2010-07	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (includes Amendment A1:2009)
DIN EN 12044:2010-03	Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009)
DIN EN 14238:2010-02	Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009)
DIN EN 13035-3:2010-02	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
DIN EN 14656:2010-10	Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010)
BS EN 792-8 : 2001	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
BS EN 1870-2:1999	Safety of woodworking machines. Circular sawing machines Horizontal beam panel saws and vertical panel saws
BS EN 13570 : 2005	FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 14238 : 2004	CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
BS EN 14673 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
BS EN 13355 : 2004	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN 1034-14 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
BS EN 12653 : 2000	FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
BS EN 1760-3 : 2004	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
UNE-EN 1493:2011	Vehicle lifts
BS EN 792-12 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS
BS EN 12757-1 : 2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN 792-6 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
UNE-EN 1777:2011	Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
ISO 10472-4:1997	Safety requirements for industrial laundry machinery Part 4: Air dryers
BS EN 1034-5 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
BS EN 12981 : 2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 746-2:2010	Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
UNE-EN 13135-2:2005	Cranes - Equipment - Part 2: Non-electrotechnical equipment
I.S. EN 619:2002
I.S. EN 12757-1:2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 12215:2004	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 1034-2:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
I.S. EN 12717:2001	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
DIN EN 1915-1:2001-06	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
I.S. EN 13114:2002	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
I.S. EN 869:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
DIN EN 1218-4:2009-12	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
I.S. EN 12203:2003	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
I.S. EN 1248:2001	FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
I.S. EN 14656:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
I.S. EN 1012-1:2010	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
I.S. EN 1679-1:1998	RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
EN 15746-2:2010+A1:2011	Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
DIN EN 1248:2010-06	Foundry machinery - Safety requirements for abrasive blasting equipment (includes Amendment A1:2009)
I.S. EN 13885:2005	FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12622:2009	SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
I.S. EN 13113:2002	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13042-5:2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
I.S. EN 1218-2:2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
I.S. EN 1034-13:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
I.S. EN 14492-1:2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
I.S. EN 12855:2003	FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13288:2005	FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 792-3:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
I.S. EN 1028-1:2002	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
DIN EN 1570:2009-12	SAFETY REQUIREMENTS FOR LIFTING TABLES
DIN EN 792-2:2001-02	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
I.S. EN 14238:2004	CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
DIN EN 792-6:2001-02	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
DIN EN 792-4:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
DIN EN 1218-3:2009-12	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 422:2009	PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13042-1:2007	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
DIN EN 14492-1:2010-06	Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009)
I.S. EN 415-3:2000	SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
I.S. EN ISO 10472-4:2008	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS
DIN EN 1870-1:1999-07	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 13218:2010-09	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
I.S. EN 13035-4:2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
I.S. EN 1034-4:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
DIN EN 792-1:2001-02	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
I.S. EN 1034-6:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
DIN EN 792-7:2002-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
I.S. EN 1915-1:2013	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
I.S. EN 746-2:2010	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
I.S. EN 12409:2008	PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
DIN EN 792-4:2001-02	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
I.S. EN 12044:2005	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13102:2006	CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
DIN EN 792-3:2001-02	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
I.S. EN 12629-1:2000	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
DIN EN 792-5:2001-02	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
DIN EN 792-6:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
I.S. EN 13035-3:2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
I.S. EN 12981:2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 12621:2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
DIN EN 13852-2:2005-03	Cranes - Offshore cranes - Part 2: Floating cranes
DIN EN 1760-1:1997-09	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
DIN EN 1807:1999-10	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 1034-1:2010-12	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010)
I.S. EN 14681:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN 1034-7:2010-06	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests (includes Amendment A1:2009)
DIN EN 13218:2002-09	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
I.S. EN 12348:2000	CORE DRILLING MACHINES ON STAND - SAFETY
I.S. EN 1218-5:2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 1218-3:2002	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 930:1998	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
I.S. EN 1034-5:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
I.S. EN 1034-1:2000	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 12978:2003	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
I.S. EN 1493:2010	VEHICLE LIFTS
I.S. EN ISO 13849-1:2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
I.S. EN 13985:2003	MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
I.S. EN 1034-7:2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
I.S. EN 13675:2004	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
I.S. EN 13355:2005	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN 931:1998	FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
I.S. EN 1034-14:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
I.S. EN 746-1:1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
I.S. EN 13591:2005	FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 201:2009	PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 1777:2010	HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
I.S. EN 12984:2006	FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13042-3:2007	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
I.S. EN 12653:2000	FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
I.S. EN 15027:2007	TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
I.S. EN 13019:2001	MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
I.S. EN 1218-1:2000	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
DIN EN 1034-5:2010-07	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (includes Amendment A1:2009)
I.S. EN 415-5:2006	SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
I.S. EN 1010-1:2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 792-9:2001-08	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
I.S. EN 1247:2004	FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
DIN EN ISO 10821:2013-02	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
DIN EN 13788:2002-04	MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
DIN EN 792-8:2001-08	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
I.S. EN 1398:2009	DOCK LEVELLERS - SAFETY REQUIREMENTS
I.S. EN 1114-2:1998	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
I.S. EN 14673:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
I.S. EN 1889-2:2003	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
I.S. EN 13112:2002	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
EN 415-3:1999+A1:2009	Safety of packaging machines - Part 3: Form, fill and seal machines
I.S. EN 12312-18:2005	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS
DIN EN 1034-4:2010-07	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (includes Amendment A1:2009)
I.S. EN 972:1998	TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
I.S. EN 12387:2005	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
DIN EN 1034-6:2010-07	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (includes Amendment A1:2009)
I.S. EN 13021:2003	WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
DIN EN 1845:2008-06	Footwear manufacturing machines - Footwear moulding machines - Safety requirements
DIN EN 12957:2001-12	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
I.S. EN 1845:2007	FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 1760-2:2001-07	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
I.S. EN 13457:2004	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12921-1:2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 15746-2 : 2011	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 1034-2:2010-09	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (includes Amendment A1:2009)
I.S. EN 13390:2002	FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12336:2010-03	TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 415-7:2006	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
I.S. EN 12581:2006	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 1218-5 : 2010	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 1550:1998	MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
UNI EN 792-7 : 2008	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
UNI EN 12387 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 792-11 : 2009	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
UNI EN 13390 : 2010	FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
NF EN 619 : 2003 + A1 2010
ONORM EN 15094 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
NF EN 13885 : 2005 + A1 2010	FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
08/30178810 DC : DRAFT MAY 2008	BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
DIN EN 1501-3:2010-06	Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
DIN EN ISO 11148-3:2013-05	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
DIN EN 13035-5:2010-07	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking (includes Amendment A1:2009)
DIN EN ISO 11148-2:2012-06	Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011)
DIN EN 13035-11:2010-07	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (includes Amendment A1:2010)
I.S. EN 13035-2:2008	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
01/711762 DC : DRAFT SEP 2001	BS EN 14238 - CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
UNI EN 415-8 : 2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
BS EN ISO 11148-2:2011	Hand-held non-electric power tools. Safety requirements Cutting-off and crimping power tools
BS EN ISO 11148-3:2012	Hand-held non-electric power tools. Safety requirements Drills and tappers
BS EN 50308:2004	Wind turbines. Protective measures. Requirements for design, operation and maintenance
10/30218988 DC : 0	BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) TANK VALVES AND FITTINGS
I.S. EN 13788:2002	MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
08/30173038 DC : DRAFT JAN 2008	BS EN 422 - PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
PREN 1493 : DRAFT 2008	VEHICLE LIFTS
11/30247811 DC : 0	BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
06/30118768 DC : 0	EN 1398 - DOCK LEVELLERS
09/30183551 DC : 0	BS ISO 11148-7 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
09/30175678 DC : 0	BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
09/30187383 DC : 0	BS ISO 11148-11 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
10/30232428 DC : DRAFT DEC 2010	BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
DIN EN 14677:2008-11	SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
EN 1218-1:1999+A1:2009	Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table
10/30233212 DC : 0	BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN 15061:2009-05	Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008)
DD CEN/TS 13778:2005	Mobile demolition machinery. Safety requirements
PREN 14492-1 : DRAFT 2015	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
BS EN 15164:2008	Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines
10/30232431 DC : DRAFT DEC 2010	BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
BS EN 13035-2:2008	Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment outside the factory
UNI EN 15094 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
UNI EN ISO 8230-1 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
00/707659 DC : DRAFT APR 2000	PREN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
UNI EN ISO 11148-12 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
09/30202029 DC : 0	BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
05/30129943 DC : 0	EN 15162 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
05/30130673 DC : DRAFT MAR 2005	BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
04/30110326 DC : DRAFT APR 2004	EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
11/30237563 DC : 0	BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
09/30183557 DC : 0	BS EN ISO 11148-9 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
DIN EN 15094:2009-04	Safety of machinery - Safety requirements for cold flat rolling mills
10/30214958 DC : 0	BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
04/30110543 DC : 0	EN 1845 - FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN ISO 11148-8 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
BS EN 15094:2008	Safety of machinery. Safety requirements for cold flat rolling mills
UNI EN 14753 : 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
05/19981967 DC : 0	BS EN 1034-6 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: PULPERS
PREN 16191 : DRAFT 2010	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
97/720418 DC : DRAFT DEC 1997	EN 1009-2 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 2: FEEDING MACHINERY
05/30133297 DC : DRAFT MAY 2005	EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
05/30138432 DC : DRAFT AUG 2005	BS EN 1501-1 - REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
04/301784 DC : DRAFT JAN 2004	EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
I.S. CEN TS 13778:2004	MOBILE DEMOLITION MACHINERY - SAFETY REQUIREMENTS
DIN EN 14753:2008-03	Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
NF EN 15746-2 : 2010 + A1 2011	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNE-EN 1870-6:2003	Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading.
UNI EN ISO 11148-4 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
I.S. EN ISO 11148-3:2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
UNI EN ISO 11148-9 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
I.S. EN ISO 11148-12:2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012)
I.S. EN ISO 8230-1:2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
I.S. EN 50308:2005	WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
I.S. EN ISO 11148-6:2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
ISO 16030:2001	Pneumatic fluid power — Connections — Ports and stud ends
PREN 1870-10 : DRAFT 2011	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNI EN 13035-7 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
DIN EN 12921-1:2011-02	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
I.S. EN 15162:2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
DIN EN 746-2:2011-02	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
DIN EN 1247:2010-12	Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines (includes Amendment A1:2010)
DIN EN 12348:2010-01	Core drilling machines on stand - Safety (includes Amendment A1:2009)
DIN EN 12622:2014-02	Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013)
DIN EN 12649:2011-09	Concrete compactors and smoothing machines - Safety
DIN EN 1679-1:2011-09	Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
DIN EN 12717:2009-07	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
DIN EN 1034-13:2010-07	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units (includes Amendment A1:2009)
DIN EN 13113:2011-05	Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010)
DIN EN 792-11:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
DIN EN 13736:2009-11	SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
DIN EN 692:2009-10	Machine tools - Mechanical presses - Safety (includes Amendment A1:2009)
DIN EN 422:2009-10	PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 930:2010-07	Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements (includes Amendment A2:2009)
DIN EN 12629-1:2011-01	Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 13885:2011-02	Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 13985:2009-11	Machine tools - Safety - Guillotine shears (includes Amendment A1:2009)
DIN EN 931:2010-07	Footwear manufacturing machines - Lasting machines - Safety requirements (includes Amendment A2:2009)
DIN EN 14673:2010-10	Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010)
BS EN 12629-1 : 2001	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
BS EN 12478:2001	Safety of machine tools. Large numerically controlled turning machines and turning centres
BS EN 1218-2 : 2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
BS EN 13898 : 2003	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
BS EN 1114-2 : 1998	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
BS EN 746-1 : 1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
BS EN 13135-2 : 2004	CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
BS EN 1010-1 : 2004	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 1550 : 1997	MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
BS EN 13102 : 2005	CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
BS EN 792-5 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
BS EN 12215 : 2004	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
ISO 11148-4:2012	Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools
BS EN 12151:2007	Machinery and plants for the preparation of concrete and mortar. Safety requirements
BS EN 12649 : 2008	CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
BS EN 1570 : 1999	SAFETY REQUIREMENTS FOR LIFTING TABLES
UNE-EN 693:2001	Machine tools - Safety - Hydraulic presses
EN 13985:2003+A1:2009	Machine tools - Safety - Guillotine shears
EN 13736:2003+A1:2009	Safety of machine tools - Pneumatic presses
EN ISO 8230-1:2008	Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
EN 1570:1998+A2:2009	Safety requirements for lifting tables
EN 792-6:2000+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
EN 982:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
UNI EN 12921-1 : 2010	MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 792-3 : 2008	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
UNI EN 1012-1 : 2010	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
UNI EN 14677 : 2008	SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
UNI EN 13288 : 2010	FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 792-12 : 2009	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS
UNI EN 13035-4 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
UNI EN 12581 : 2010	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 1010-1 : 2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN 13135-2 : 2010	CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
UNI EN 13042-1 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
UNI EN 12203 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
UNI EN 1679-1 : 2011	RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
UNI EN 619 : 2011	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS
UNI EN 13113 : 2010	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNI EN 1114-3 : 2009	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNI EN 972 : 2010	TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
UNI EN 13736 : 2009	SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
UNI EN 15027 : 2009	TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
UNI EN 1114-2 : 2008	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
UNI EN 13977 : 2011	RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
UNI EN 1398 : 2009	DOCK LEVELLERS - SAFETY REQUIREMENTS
UNI EN 692 : 2009	MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
UNI EN 1570 : 2009	SAFETY REQUIREMENTS FOR LIFTING TABLES
UNI EN 792-2 : 2008	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
UNI EN ISO 12100-2 : 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
UNI EN 15061 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 1845 : 2008	FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 13035-3 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
UNI EN 14673 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
UNI EN 1028-1 : 2008	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
UNI EN 815 : 2009	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
UNI EN 12981 : 2009	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 13457 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
UNI EN 12855 : 2010	FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12649 : 2011	CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
UNI EN 12653 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
UNI EN 12417 : 2009	MACHINE TOOLS - SAFETY - MACHINING CENTRES
UNI EN 1034-4 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
UNI EN 792-4 : 2008	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
UNI EN 13042-3 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
UNI EN 792-10 : 2009	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
UNI EN 792-5 : 2008	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
UNI EN 12757-1 : 2010	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNI EN 13112 : 2010	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
UNI EN 1218-4 : 2009	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
UNI EN 12978 : 2009	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
UNI EN 12629-1 : 2010	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
UNI EN 201 : 2010	PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 1915-1 : 2014	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
UNI EN 1034-7 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
UNI EN 1034-6 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
UNI EN 12984 : 2010	FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 415-5 : 2010	SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
UNI EN 14656 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
UNI EN 13885 : 2010	FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1493 : 2010	VEHICLE LIFTS
UNI EN 13898 : 2009	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
UNI EN 982 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
UNI EN 792-8 : 2008	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
UNI EN 1760-2 : 2009	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
UNI EN 1870-1 : 2009	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
UNI EN 12409 : 2011	PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
UNI EN 13218 : 2008	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
UNI EN 1247 : 2010	FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 14238 : 2009	CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
UNI EN 13042-5 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
UNI EN 13000 : 2014	CRANES - MOBILE CRANES
UNI EN 931 : 2010	FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
ONORM EN 15061 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 792-6 : 2008	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
UNI EN 930 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
UNI EN 1550 : 2008	MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
UNI EN 1777 : 2010	HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
UNI EN 12336 : 2009	TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 869 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
UNI EN 1889-2 : 2009	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
UNI EN 12044 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
UNI EN 1034-2 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
UNI EN 792-9 : 2008	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
UNI EN 746-2 : 2011	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
UNI EN 14492-2 : 2009	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
UNI EN 14070 : 2009	SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
UNI EN 693 : 2011	MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
UNI EN 12957 : 2009	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
UNI EN 13985 : 2009	MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
UNI EN 1710 : 2008	EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNI EN 1760-1 : 2009	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
UNI EN 1248 : 2009	FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
UNI EN 13128 : 2009	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
UNI EN ISO 10472-4 : 2009	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS
UNI EN 12348 : 2009	CORE DRILLING MACHINES ON STAND - SAFETY
UNI EN 1034-5 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
UNI EN 1807 : 2010	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
UNI EN 1034-14 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
UNI EN 13355 : 2009	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNI EN 12215 : 2010	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
BS EN 1247 : 2004	FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 422 : 2009	PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 14492-1 : 2009	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
UNI EN 13102 : 2009	CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
UNI EN 12621 : 2010	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNI EN 12717 : 2009	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
UNI EN 13570 : 2010	FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 792-1 : 2008	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
UNI EN 415-7 : 2008	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
UNI EN 1218-3 : 2009	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
UNI EN 1760-3 : 2009	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
UNI EN 13675 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
UNI EN 1034-13 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
UNI EN 13591 : 2010	FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12622 : 2014	SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
UNI EN 746-1 : 2009	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
UNI EN 13114 : 2010	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
UNI EN 14681 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN ISO 11148-6:2013-05	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
UNI EN 15164 : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
DIN EN 13035-7:2010-07	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (includes Amendment A1:2009)
10/30235571 DC : DRAFT DEC 2010	BS EN 13418 - PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
01/712575 DC : DRAFT SEP 2001	ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION
09/30183554 DC : 0	BS EN ISO 11148-8 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
10/30232425 DC : DRAFT DEC 2010	BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
09/30175681 DC : 0	BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
I.S. EN 13035-7:2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
10/30227080 DC : DRAFT JUNE 2010	BS EN 691-1 - SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN ISO 11148-9:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011)
NF EN 13035-11 : 2006 + A1 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
08/30182786 DC : DRAFT JULY 2008	BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
DIN EN ISO 11148-4:2013-05	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
I.S. EN 13035-11:2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
BS EN ISO 11148-8:2011	Hand-held non-electric power tools. Safety requirements Sanders and polishers
UNI EN 15162 : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
05/30076959 DC : DRAFT APR 2005	BS EN 12453 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER-OPERATED DOORS - REQUIREMENTS
11/30237560 DC : 0	BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
I.S. EN 692:2005	MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
00/707658 DC : DRAFT APR 2000	PREN 13852-2 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
BS EN 14677:2008	Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
PREN 848-3 : DRAFT 2010	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
07/30166811 DC : 0	BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
BS ISO 4414:1998	Pneumatic fluid power. General rules relating to systems
BS EN ISO 11148-6:2012	Hand-held non-electric power tools. Safety requirements Assembly power tools for threaded fasteners
I.S. EN 12478:2000	SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
08/30174167 DC : DRAFT SEP 2008	BS EN 12312-18 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS
09/30187374 DC : 0	BS ISO 11148-2 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
DIN ISO 16030:2007-05	PNEUMATIC FLUID POWER - CONNECTIONS - PORTS AND STUD ENDS
04/30058509 DC : DRAFT JUNE 2004	BS EN 14985 - CRANES - SLEWING JIB CRANES
EN 1034-1:2000+A1:2010	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
UNI EN 1501-3 : 2008	REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
08/30185056 DC : DRAFT SEP 2008	BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS
PREN 13870 : DRAFT 2013	FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
05/30133333 DC : DRAFT MAY 2005	EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
11/30247562 DC : 0	BS EN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
05/19981975 DC : DRAFT JUN 2005	BS EN 1034-2 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
DIN EN 13035-2:2008-10	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
08/30175652 DC : DRAFT SEP 2008	BS EN 1248 AMD1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
07/30170114 DC : 0	BS EN 201 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
05/30137922 DC : DRAFT AUG 2005	ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN ISO 11148-7:2012	Hand-held non-electric power tools. Safety requirements Grinders
04/19987464 DC : 0	BS EN 15027 - TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
04/30124187 DC : 0	PREN 415-8 - SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
14/30298212 DC : 0	BS EN 12453 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS
96/107552 DC : DRAFT OCT 1996	BS EN 12609 - TRUCKMIXERS - SAFETY REQUIREMENTS
97/720420 DC : DRAFT DEC 1997	EN 1009-4 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 4: SIZING AND SORTING MACHINERY
BS EN 13035-6 : 2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
04/30086349 DC : DRAFT APR 2004	EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
00/705761 DC : DRAFT FEB 2000	PREN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
NF EN 13035-7 : 2006 + A1 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
DIN EN 13035-6:2010-07	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (includes Amendment A1:2009)
DIN EN ISO 8230-1:2009-05	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
DIN EN ISO 11148-10:2012-06	Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)
UNI EN ISO 11148-11 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
UNI EN ISO 11148-3 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
I.S. EN 15094:2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
PREN 13852-1 : DRAFT 2011	CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
GOST EN 1760-1 : 2004	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1 - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
PREN 13852 : DRAFT 2000	CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
PREN 12042 : DRAFT 2011	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12757-1:2011-02	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
ISO 16156:2004	Machine-tools safety — Safety requirements for the design and construction of work holding chucks
I.S. EN 13035-5:2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
I.S. EN 15166:2008	FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
EN 13035-3:2003	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
UNE-EN 1915-1:2013	Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
DIN EN 12312-18:2009-08	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS
DIN EN 1710:2008-08	EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
DIN EN 13977:2011-04	Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
DIN EN 415-3:2010-07	Safety of packaging machines - Part 3: Form, fill and seal machines (includes Amendment A1:2009)
DIN EN 201:2010-02	PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 972:2011-07	Tannery machines - Reciprocating roller machines - Safety requirements (includes Amendment A1:2010)
DIN EN 1870-1:2009-08	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 1114-3:2015-12 (Draft)	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
BS EN 415-5 : 2006	SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
BS EN 13885 : 2005	FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 792-11 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
ISO 11148-6:2012	Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners
BS EN ISO 10821 : 2005	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
BS EN 1028-1 : 2002	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
ISO 8230-1:2008	Safety requirements for dry-cleaning machines Part 1: Common safety requirements
BS EN 415-4:1998	Safety of packaging machines Palletizers and depalletizers
UNE-EN 12621:2006	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
ISO 11148-1:2011	Hand-held non-electric power tools Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners
BS EN 13675 : 2004	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
ISO 10821:2005	Industrial sewing machines Safety requirements for sewing machines, units and systems
BS EN 1218-3 : 2001	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
BS EN 13035-4 : 2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
BS EN 869 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
BS EN 1889-2 : 2003	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
BS EN 12840:2001	Safety of machine tools. Manually controlled turning machines with or without automatic control
BS EN 12417 : 2001	MACHINE TOOLS - SAFETY - MACHINING CENTRES
BS EN 815 : 1997	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
BS EN 12445:2001	Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods
BS EN 1870-1 : 2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
BS EN 619 : 2002
BS EN 13736 : 2003	SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
BS EN 1777:2010	Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
BS EN 1218-4 : 2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
BS EN 12336 : 2005	TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
BS EN 13112 : 2002	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
BS EN 12621 : 2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
BS EN 1034-4 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
UNE-EN 13288:2006	Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
BS EN 982 : 1996	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
BS EN 1553:2000	Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements
BS EN 1034-6 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
UNE-EN 12649:2009	Concrete compactors and smoothing machines - Safety
BS EN 931 : 1998	FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
BS EN 415-3 : 2000	SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
BS EN 201:2009	Plastics and rubber machines. Injection moulding machines. Safety requirements
BS EN 13042-1 : 2007	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
BS EN 13977:2011	Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance
BS EN 930 : 1997	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
ISO 11148-2:2011	Hand-held non-electric power tools Safety requirements Part 2: Cutting-off and crimping power tools
BS EN 13021 : 2003	WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
BS EN 12717 : 2001	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
UNE-EN 1248:2001	Foundry Machinery - Safety requirements for abrasive blasting equipment.
ISO 11148-9:2011	Hand-held non-electric power tools Safety requirements Part 9: Die grinders
UNE-EN 13114:2002	Tannery machines- Rotating process vessels - Safety requirements.
BS EN 1807 : 1999	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
UNE-EN 12622:2011	Safety of machine tools - Hydraulic press brakes
BS EN 1034-2 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
ISO 11148-8:2011	Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishers
BS EN 12978 : 2003	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
BS EN 13985 : 2003	MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
BS EN 13288 : 2005	FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12348 : 2000	CORE DRILLING MACHINES ON A STAND - SAFETY
BS EN 415-7 : 2006	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
BS EN 972 : 1998	TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
ISO 11148-11:2011	Hand-held non-electric power tools Safety requirements Part 11: Nibblers and shears
BS EN 1218-5 : 2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
BS EN 1248 : 2001	FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
BS EN 693 : 2001	MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
BS EN 14492-1 : 2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
ISO 11148-5:2011	Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills
BS EN 422:2009	Plastics and rubber machines. Blow moulding machines. Safety requirements
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
BS EN 14070 : 2003	SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
UNE-EN 619:2003	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads.
BS EN 1760-2 : 2001	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
BS EN 12415:2001	Safety of machine tools. Small numerically controlled turning machines and turning centres
BS EN 12044 : 2005	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
BS EN 15027 : 2007	TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
BS EN 12957 : 2001	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
UNE-EN 13112:2002	Tannery machines - Splitting and bandknife shearing machines - Safety requirements.
BS EN 13788:2002	Machine tools. Safety. Multi-spindle automatic turning machines
UNE-EN 12409:2009	Plastics and rubber machines - Thermoforming machines - Safety requirements
BS EN 1710 : 2005	EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNE-EN 13000:2010	Cranes - Mobile cranes
BS EN 13114 : 2002	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
ISO 11148-7:2012	Hand-held non-electric power tools — Safety requirements — Part 7: Grinders
ISO 11148-10:2011	Hand-held non-electric power tools Safety requirements Part 10: Compression power tools
UNE-EN 13591:2006	Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements
BS EN 1034-7 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
BS EN ISO 11111:1996	Safety requirements for textile machinery
BS EN 13042-5 : 2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
BS EN 13113 : 2002	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
BS EN 1114-3 : 2001	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNE-EN 1247:2005	Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines
BS EN ISO 13849-1:2015	Safety of machinery. Safety-related parts of control systems General principles for design
BS EN 13591 : 2005	FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1760-1 : 1998	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
UNE-EN ISO 13849-1:2016	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
UNE-EN 13113:2002	Tannery machines - Roller coating machines - Safety requirements.
DIN EN 13042-5:2009-12	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses (includes Amendment A1:2009)
DIN EN 792-11:2001-02	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
EN 13814:2004	Fairground and amusement park machinery and structures - Safety
EN ISO 11148-8:2011	Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
EN 792-5:2000+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
EN 13788 : 2001	MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
EN 13885:2005+A1:2010	Food processing machinery - Clipping machines - Safety and hygiene requirements
EN 201:2009	Plastics and rubber machines - Injection moulding machines - Safety requirements
EN 692:2005+A1:2009	Machine tools - Mechanical presses - Safety
EN 792-7:2001+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
EN 1493:2010	Vehicle lifts
EN 13977:2011	Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
EN 13035-5:2006+A1:2009	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking
EN 619:2002+A1:2010	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
EN 13675:2004+A1:2010	Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
EN 14656:2006+A1:2010	Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals
EN 422:2009	Plastics and rubber machines - Blow moulding machines - Safety requirements
EN 15027:2007+A1:2009	Transportable wall saw and wire saw equipment for job site - Safety
EN 415-7:2006+A1:2008	Safety of packaging machines - Part 7: Group and secondary packaging machines
EN 1915-1:2013	Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 415-8:2008	Safety of packaging machines - Part 8: Strapping machines
EN 12984:2005+A1:2010	Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements
EN ISO 11148-7:2012	Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)
EN ISO 10472-4:2008	Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)
EN 15094:2008	Safety of Machinery - Safety requirements for cold flat rolling mills
EN 15164:2008	Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines
EN ISO 11148-6:2012	Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)
UNI EN 13021 : 2009	WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
EN 15061:2007+A1:2008	Safety of machinery - Safety requirements for strip processing line machinery and equipment
EN 792-10:2000+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools
EN ISO 11148-12:2012	Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
EN ISO 11148-2:2011	Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011)
EN 1550:1997+A1:2008	Machine-tools safety - Safety requirements for the design and construction of work holding chucks
EN 14238:2004+A1:2009	Cranes - Manually controlled load manipulating devices
EN 746-2:2010	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 13591:2005+A1:2009	Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements
EN 746-1:1997+A1:2009	Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 12581:2005+A1:2010	Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
EN ISO 11148-4:2012	Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)
EN 1807:1999+A1:2009	Safety of woodworking machines - Band sawing machines
EN 1760-2:2001+A1:2009	Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN ISO 11148-5:2011	Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
EN ISO 13849-1:2015	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 15093:2008	Safety of Machinery - Safety requirements for hot flat rolling mills
EN 792-8:2001+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers
EN 15166:2008	Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
EN 1760-3:2004+A1:2009	Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
EN 930:1997+A2:2009	Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
EN ISO 11148-1:2011	Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
EN 1870-2:1999/AC:2002	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
EN ISO 8230 : 1997	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
EN 14681:2006+A1:2010	Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
EN ISO 11148-3:2012	Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)
EN ISO 11148-11:2011	Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
EN 15162:2008	Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws
EN 792-4:2000+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools
EN 1845:2007	Footwear manufacturing machines - Footwear moulding machines - Safety requirements
EN 869:2006+A1:2009	Safety of machinery - Safety requirements for pressure metal diecasting units
EN 1398:2009	Dock levellers - Safety requirements
UNI EN 13019 : 2009	MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
EN 1870-1:2007+A1:2009	Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
EN 792-11:2000+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
EN 792-1:2000+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
EN 14673:2006+A1:2010	Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
EN 12978:2003+A1:2009	Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
EN 1760-1:1997+A1:2009	Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
EN 693 : 2001 COR 2011	MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
EN 815:1996+A2:2008	Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
EN 13035-4:2003+A1:2009	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
EN 14753:2007	Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
EN 792-9:2001+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
EN 1553 : 1999	AGRICULTURAL MACHINERY - AGRICULTURAL SELF-PROPELLED, MOUNTED, SEMI-MOUNTED AND TRAILED MACHINES - COMMON SAFETY REQUIREMENTS
EN 13042-5:2003+A1:2009	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses
EN ISO 11148-9:2011	Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
EN 792-2:2000+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools
EN 14677:2008	Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
EN 792-3:2000+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers
EN 1889-2:2003+A1:2009	Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
EN 792-12:2000+A1:2008	Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws
EN ISO 11148-10:2011	Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)
EN 1679-1:1998+A1:2011	Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
EN 415-5:2006+A1:2009	Safety of packaging machines - Part 5: Wrapping machines
EN 13390:2002+A1:2009	Food processing machinery - Pie and tart machines - Safety and hygiene requirements
EN 1777:2010	Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
EN 931:1997+A2:2009	Footwear manufacturing machines - Lasting machines - Safety requirements
EN 1028-1:2002+A1:2008	Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements
EN 13852-2:2004	Cranes - Offshore cranes - Part 2: Floating cranes
DIN EN ISO 11148-5:2012-06	Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
05/30129951 DC : 0	EN 15164 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
09/30199364 DC : 0	BS EN 13463-5 - NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
DIN EN ISO 11148-1:2012-06	Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
09/30183560 DC : 0	BS ISO 11148-12 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
UNI EN ISO 11148-7 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
I.S. EN ISO 11148-1:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011)
09/30206358 DC : DRAFT SEP 2009	BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
BS ISO 16030:2001	Pneumatic fluid power. Connections. Ports and stud ends
I.S. EN 13814:2005	FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
10/30179839 DC : 0	BS EN 1010-5:2005/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD
07/30172833 DC : DRAFT DEC 2007	BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 1870-1:2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
I.S. EN ISO 8230:1998	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
I.S. EN ISO 11148-4:2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
09/30181712 DC : 0	BS EN 12855:2003/A1 - FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
04/30122476 DC : 0	EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
I.S. EN 792-7:2002	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
09/30187377 DC : 0	BS ISO 11148-5 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
09/30202538 DC : DRAFT JUN 2009	BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
03/112610 DC : DRAFT AUG 2003	EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY
09/30180832 DC : DRAFT AUG 2009	BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT
EN 1218-2:2004+A1:2009	Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
DIN EN 1550:2008-11	MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
07/30161919 DC : 0	EN 940 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
DIN EN ISO 11148-7:2013-01	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
04/30123607 DC : DRAFT OCT 2004	EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
03/306595 DC : 0	BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
BS EN ISO 11148-9:2011	Hand-held non-electric power tools. Safety requirements Die grinders
DIN EN 415-8:2011-06	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
I.S. EN 12417:2001	MACHINE TOOLS - SAFETY - MACHINING CENTRES
08/30180969 DC : DRAFT APR 2008	BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
00/706812 DC : DRAFT MAR 2000	BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
PREN 13463-5 : DRAFT 2009	NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
00/717064 DC : DRAFT NOV 2000	PREN 14070 - SAFETY OF MACHINES TOOLS - TRANSFER AND SPECIAL PURPOSE MACHINES
BS EN ISO 11148-4:2012	Hand-held non-electric power tools. Safety requirements Non-rotary percussive power tools
DIN EN 15746-2:2016-02 (Draft)	Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
06/30156491 DC : 0	BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
09/30187380 DC : 0	BS ISO 11148-10 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
06/30147145 DC : 0	EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
05/19981949 DC : DRAFT MAY 2005	BS EN 1034-14 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLICERS
05/30133339 DC : DRAFT MAY 2005	EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
00/541592 DC : DRAFT NOV 2000	BS EN 13463-5 - NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY
05/19981969 DC : DRAFT JUN 2005	BS EN 1034-5 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
02/711304 DC : DRAFT SEP 2002	BS EN 415-5 - PACKAGING MACHINES SAFETY - PART 5: WRAPPING MACHINES
BS ISO 16156:2004	Machine-tools safety. Safety requirements for the design and construction of work holding chucks
02/705139 DC : DRAFT APR 2002	PREN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
DIN EN 1010-5:2005-10	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board
NF EN 13035-6 : 2006 + A1 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
NF EN 12649 : 2008 + A1 2011	CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
I.S. EN 1501-3:2008	REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
I.S. EN ISO 11148-7:2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
I.S. EN ISO 11148-11:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011)
I.S. EN 415-8:2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
BS EN 15746-2 : 2010	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 14677:2008	SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
ISO 18652:2005	Building construction machinery and equipment External vibrators for concrete
UNI EN 15166 : 2009	FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
15/30279801 DC : 0	BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 13035-6 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
UNI EN ISO 11148-10 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
I.S. EN ISO 11148-5:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011)
DIN EN 619:2011-02	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads (includes Amendment A1:2010)
I.S. EN 13035-6:2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
DIN EN 13390:2011-02	Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 1218-2:2009-10	Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (includes Amendment A1:2009)
DIN EN 792-2:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
DIN EN 1028-1:2008-09	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
DIN EN ISO 13849-1:2016-06	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
DIN EN 13457:2010-10	Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010
DIN EN 14492-2:2016-08 (Draft)	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 13135-2:2011-07	CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
DIN EN 1760-2:2009-08	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
DIN EN 1760-1:2009-08	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
DIN EN 792-9:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
DIN EN 792-10:2009-12	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
DIN EN 1218-5:2010-02	Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009)
DIN EN 14492-1:2015-05 (Draft)	Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015
BS EN 792-1 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
BS EN 13852-2:2004	Cranes. Offshore cranes Floating cranes
BS EN ISO 10472-4:2008	Safety requirements for industrial laundry machinery Air dryers
BS EN 792-3 : 2000	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
DIN EN 1889-2:2009-07	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
BS EN 1218-1 : 1999	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
BS EN 13019 : 2001	MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
BS EN 1845:2007	Footwear manufacturing machines. Footwear moulding machines. Safety requirements
BS EN 1034-13 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
BS EN 12581 : 2005	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 692 : 2005	MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
BS EN 14656 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
BS EN 13814:2004	Fairground and amusement park machinery and structures. Safety
BS EN 1012-1:2010	Compressors and vacuum pumps. Safety requirements Air compressors
ISO 11148-3:2012	Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers
BS EN 1915-1:2013	Aircraft ground support equipment. General requirements Basic safety requirements
BS EN 792-9 : 2001	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
BS EN ISO 8230:1998	Safety requirements for dry-cleaning machines using perchloroethylene
BS EN 13390 : 2002	FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 14681 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
BS EN 14492-2 : 2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
ISO 11148-12:2012	Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws
BS EN 792-7 : 2001	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
BS EN 12921-1 : 2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
ISO 8230:1997	Safety requirements for dry-cleaning machines using perchloroethylene
DIN EN 14492-2:2010-05	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 1114-3:2001+A1:2008	Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
EN 1034-14:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
EN 13288:2005+A1:2009	Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
EN 12387:2005+A1:2009	Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
EN 12415:2000/A1:2002	SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
EN 12981:2005+A1:2009	Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 1247:2004+A1:2010	Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
DIN EN 13035-1:2008-06	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
UNI EN 1218-2 : 2009	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
DIN EN 815:1996-11	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
EN 50308 : 2004 COR 2005	WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
EN 13035-11:2006+A1:2010	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
EN 13019:2001+A1:2008	Machines for road surface cleaning - Safety requirements
DIN EN 1114-2:1998-06	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
EN 12348:2000+A1:2009	Core drilling machines on stand - Safety
NF EN 1218-5 : 2004 + A1 2010	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FED BY CHAIN
EN 1012-1:2010	Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
EN 1034-4:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
EN 12629-1:2000+A1:2010	Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements
DIN EN 13898:2009-09	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
EN 12957:2001+A1:2009	Machine tools - Safety - Electro discharge machines
EN 12840 : 2001	SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
EN 13570:2005+A1:2010	Food processing machinery - Mixing machines - Safety and hygiene requirements
DIN EN 792-12:2001-02	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS
DIN EN 815:2009-12	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
DIN EN 12151:2008-05	MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
EN 13035-1:2008	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
EN 1501-3:2008	Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
DIN EN 15746-2:2011-12	Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
DIN EN 792-10:2001-02	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
UNE-EN 415-3:2000	Safety of packaging machines. Part 3: Form, fill and seal machines.
UNE-EN 1034-5:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
UNE-EN 746-1:1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT. PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT.
UNE-EN 1034-2:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
ONORM EN 1010-5 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD
UNE-EN 12203:2004	Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
UNE-EN 13390:2002	Food processing machinery- Pie and tart machines - Safety and hygiene requirements.
UNE-EN 12757-1:2006+A1:2010	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
UNE-EN 15746-2:2011	Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
UNE-EN 12757-1:2006	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
UNE-EN 415-5:2007	Safety of packaging machines - Part 5: Wrapping machines
UNE-EN 1679-1:1998	RECIPROCATING INTERNAL COMBUSTION ENGINES. SAFETY. PART 1: COMPRESSION IGNITION ENGINES.
UNE-EN 1034-6:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
UNE-EN 12044:2006	Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
UNE-EN 12629-1:2001	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FORM CONCRETE AND CALCIUM-SILICATE. SAFETY. PART 1: COMMON REQUIREMENTS
UNE-EN 1034-14:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
UNE-EN 1034-7:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
UNE-EN 1034-4:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
UNE-EN 1034-13:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units

EN 50081-1:1992	Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry
ISO 4400:1994	Fluid power systems and components — Three-pin electrical plug connectors with earth contact — Characteristics and requirements
EN 418 : 1992	SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN 982:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 5774:2016	Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 5598:2008	Fluid power systems and components Vocabulary
ISO 10099:2001	Pneumatic fluid power — Cylinders — Final examination and acceptance criteria
ISO 2398:2016	Rubber hoses, textile-reinforced, for compressed air — Specification
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 1219-2:2012	Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
ISO 2230:2002	Rubber products — Guidelines for storage
ISO 6150:1988	Pneumatic fluid power Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) Plug connecting dimensions, specifications, application guidelines and testing
EN 292-1 : 1991	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
ISO 8331:2016	Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenance
ISO 8573-1:2010	Compressed air Part 1: Contaminants and purity classes
EN 50081-2:1993	Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
ISO 1219-1:2012	Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications
ENV 1070 : 1993	SAFETY OF MACHINERY - TERMINOLOGY
ISO 7751:2016	Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure
ISO 4414:2010	Pneumatic fluid power General rules and safety requirements for systems and their components
EN 292-2 : 91 AMD 1 95	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
1998/37/EC : 1998	DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
ISO 2944:2000	Fluid power systems and components — Nominal pressures
ISO 6952:1994	Fluid power systems and components Two-pin electrical plug connectors with earth contact Characteristics and requirements
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Shopping Cart

EN 983:1996+A1:2008

Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory