EN 932-2:1999
Current
Current
The latest, up-to-date edition.
Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
Published date
01-20-1999
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Definitions and symbols
4 Principle
5 Apparatus
6 Consideration before sample reduction
7 Sample reduction technique using a rotary sample
divider
8 Sample reduction using a riffle box
9 Sample reduction using fractional shovelling
10 Sample reduction by quartering
11 Sample reduction to a test portion of a specified
mass within a small tolerance
12 Sample reduction with crushing to reduce the particle
size
13 Procedures for obtaining duplicate test portions
Annex A (informative) Half, three-quarters and five-eigths
divisions by a riffle box
Annex B (informative) Worked examples
This European Standard specifies methods for reducing laboratory samples of aggregates to test portions, a) when the test portion mass is: - specified by a lower limit on the mass, - specified by a tolerance around a target mass; - determined precisely by the requirements of a test method.
| Committee |
CEN/TC 154
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN 932-2:1999 | Identical |
| NS EN 932-2 : 1ED 1999 | Identical |
| NF EN 932-2 : 1999 | Identical |
| BS EN 932-2:1999 | Identical |
| UNE-EN 932-2:1999 | Identical |
| NBN EN 932-2 : 1999 | Identical |
| PN EN 932-2 : 2001 | Identical |
| NEN EN 932-2 : 1999 | Identical |
| UNI EN 932-2 : 2000 | Identical |
| SN EN 932-2 : 1999 | Identical |
| DIN EN 932-2:1999-03 | Identical |
| PNE-prEN 932-2 | Identical |
| DIN EN 1367-8 E : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| BS EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates |
| I.S. EN 13055-2:2004 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| BS EN 1367-7:2014 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing of Lightweight aggregates |
| 07/30166977 DC : DRAFT AUG 2007 | BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| 07/30165780 DC : DRAFT AUG 2007 | BS EN 1097-5 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN |
| BS EN 15599-1:2010 | Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation |
| 09/30207822 DC : 0 | BS EN 15600-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| PD CEN/TR 15310-4:2006 | Characterization of waste. Sampling of waste materials Guidance on procedures for sample packaging, storage, preservation, transport and delivery |
| BS EN 933-11:2009 | Tests for geometrical properties of aggregates Classification test for the constituents of coarse recycled aggregate |
| 10/30218648 DC : DRAFT JUNE 2010 | BS EN 1744-7 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA AGGREGATE) |
| DIN EN 15600-1:2010-12 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| 08/30185875 DC : 0 | BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| DIN EN 15732:2013-01 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN EN 1744-7:2012-05 | Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
| BS EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA) |
| 11/30241878 DC : 0 | BS EN 933-6 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
| 06/30153220 DC : 0 | BS EN 1367-6 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6 - RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT |
| BS EN 1744-7:2012 | Tests for chemical properties of aggregates Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
| UNE-EN 1367-8:2015 | Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates |
| I.S. EN 1744-7:2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH AGGREGATE (MIBA AGGREGATE) |
| 08/30188887 DC : 0 | BS EN 933-9 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
| I.S. EN 1367-6:2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
| I.S. EN 1744-8:2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
| UNI EN 1744-7 : 2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH - AGGREGATE (MIBA AGGREGATE) |
| UNI EN 15732 : 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN EN 1367-2:2010-02 | Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
| DIN EN 933-8:2015-07 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
| BS EN 1097-4:2008 | Tests for mechanical and physical properties of aggregates Determination of the voids of dry compacted filler |
| BS EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres. Nordic test |
| BS EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates Determination of the polished stone value |
| UNE-EN 13179-1:2013 | Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test |
| BS EN 1744-6:2006 | Tests for chemical properties of aggregates Determination of the influence of recycled aggregate extract on the initial setting time of cement |
| BS EN 13450:2013 | Aggregates for railway ballast |
| BS EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval) |
| BS EN 1367-3:2001 | Tests for thermal and weathering properties of aggregates Boiling test for Sonnenbrand basalt |
| I.S. EN 1097-1:2011 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL) |
| EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
| DIN EN 14316-1:2004-11 | Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14316-1:2004 |
| I.S. EN 1367-2:2009 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST |
| EN 1097-10:2014 | Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
| I.S. EN 13286-1:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
| I.S. EN 13286-4:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER |
| EN 1097-7:2008 | Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
| EN 13179-1:2013 | Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test |
| CEN/TR 15310-4:2006 | Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery |
| DIN EN 14317-1:2004-11 | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14317-1:2004 |
| EN 1097-4:2008 | Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
| EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
| EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| EN 13055-2:2004 | Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| EN 13286-4:2003 | Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer |
| EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| 04/30077125 DC : 0 | EN 933-11 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATES |
| UNI EN 933-11 : 2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE |
| DIN EN 1367-7:2014-07 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| 04/30088151 DC : DRAFT FEB 2004 | EN 1744-6 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT |
| 12/30256420 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| 00/105661 DC : DRAFT AUG 2000 | BS EN 1744-4 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
| 16/30320756 DC : 0 | BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| 12/30256925 DC : 0 | BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| PREN 15600-1 : DRAFT 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| PREN 15732 : DRAFT 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN 4226-2:2002-02 | AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES |
| I.S. EN 13055:2016 | LIGHTWEIGHT AGGREGATES |
| UNI EN 1367-7 : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| I.S. EN 1097-11:2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
| I.S. EN 15600-1:2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| NF EN 1097-8 : 2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| DIN EN 1367-1:2007-06 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
| DIN EN 933-6:2014-07 | Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates |
| DIN EN 933-9:2013-07 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test (includes Amendment A1:2013) |
| DIN EN 1367-4:2008-06 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
| 17/30348303 DC : 0 | BS EN 17087 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE FOR TESTING OF RELEASE AND ANALYSIS OF CONTENT |
| BS EN 933-9 : 2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
| UNE-EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| BS EN 13055-2:2004 | Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| BS EN 13286-1:2003 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Introduction, general requirements and sampling |
| BS EN 14317-1:2004 | Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation |
| BS EN 14316-1:2004 | Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation |
| BS EN 933-3:2012 | Tests for geometrical properties of aggregates Determination of particle shape. Flakiness index |
| BS EN 933-1:2012 | Tests for geometrical properties of aggregates Determination of particle size distribution. Sieving method |
| I.S. EN 933-10:2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
| I.S. EN 933-6:2014 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
| I.S. EN 1367-1:2007 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING |
| I.S. EN 1097-5:2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN |
| I.S. EN 13179-1:2013 | TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST |
| I.S. EN 13450:2013 | AGGREGATES FOR RAILWAY BALLAST |
| I.S. EN 933-1:2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD |
| I.S. EN 1097-7:2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
| I.S. EN 933-3:2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX |
| I.S. EN 1097-6:2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
| I.S. EN 933-8:2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
| I.S. EN 933-9:2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
| I.S. EN 1097-4:2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER |
| I.S. EN 933-4:2008 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
| I.S. EN 1367-4:2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
| DIN EN 12697-11:2012-07 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
| I.S. EN 1097-9:2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
| DIN EN 933-6:2002-02 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
| I.S. EN 1744-1:2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| ONORM EN 1097-7 : 2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
| UNE-EN 1744-7:2012 | Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
| DIN EN 1367-8:2014-07 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| BS EN 13055:2016 | Lightweight aggregates |
| DIN EN 1097-11:2013-11 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
| DIN EN 1744-8:2012-11 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| 08/30185872 DC : 0 | BS EN 933-10 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
| I.S. EN 13055-1:2002 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| 07/30166974 DC : DRAFT AUG 2007 | BS EN 1367-2 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULPHATE TEST |
| DIN EN 15599-1:2010-12 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| 09/30207815 DC : 0 | BS EN 15599-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 15599-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 1097-11 : 2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
| UNI EN 1367-8 : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| 06/30153237 DC : DRAFT JULY 2006 | BS ISO 16003 - COMPONENTS FOR GASEOUS MEDIA AND FIRE EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS - CONTAINER VALVE ASSEMBLIES AND THEIR ACTUATORS, SELECTOR VALVES AND THEIR ACTUATORS, NOZZLES, FLEXIBLE CONNECTORS, AND CHECK VALVES AND NON-RETURN VALVES |
| 10/30218642 DC : DRAFT JUNE 2010 | BS EN 1097-6 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
| PREN 933-9 : DRAFT 2008 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
| BS EN 1367-6:2008 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
| I.S. EN 15732:2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| PREN 15599-1 : DRAFT 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| PREN 933-10 : DRAFT 2008 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
| DIN EN 1744-4:2005-10 | Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
| DIN EN 1744-1:2013-03 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| DIN EN 1744-5:2006-12 | Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts |
| DIN EN 933-3:2012-04 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
| DIN EN 933-1:2012-03 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| DIN EN 1744-6:2006-12 | Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement |
| DIN EN 1097-10:2014-09 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
| DIN EN 1097-4:2008-06 | Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
| DIN EN 1097-1:2011-04 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| DIN EN 1097-8:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| DIN EN 933-10:2009-10 | Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) |
| DIN EN 1097-5:2008-06 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
| DIN EN 1097-6:2013-09 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
| BS EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates Determination of the water content by drying in a ventilated oven |
| BS EN 933-6:2014 | Tests for geometrical properties of aggregates Assessment of surface characteristics. Flow coefficient of aggregates |
| BS EN 13286-4:2003 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Vibrating hammer |
| UNI EN 1097-7 : 2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
| UNI EN 1744-1 : 2013 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| UNI EN 14063-1 : 2005 | THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 933-3 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX |
| UNI EN 1367-2 : 2010 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST |
| UNI EN 1367-1 : 2007 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING |
| UNI EN 933-6 : 2014 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
| UNI EN 1367-4 : 2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
| UNI EN 13179-1 : 2013 | TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST |
| UNI EN 1097-5 : 2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN |
| UNI EN 933-1 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD |
| UNI EN 933-4 : 2008 | TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
| UNI EN 13043 : 2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 1097-10 : 2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
| UNI EN 1744-6 : 2007 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF RECYCLED AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT |
| I.S. EN 13043:2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 1097-1 : 2011 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL) |
| UNI EN 1097-9 : 2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
| UNI EN 933-10 : 2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
| UNI EN 1097-4 : 2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER |
| UNI EN 13450 : 2013 | AGGREGATES FOR RAILWAY BALLAST |
| UNE-EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
| BS EN 1367-8:2014 | Tests for thermal and weathering properties of aggregates Determination of resistance to disintegration of Lightweight Aggregates |
| I.S. EN 933-11:2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE |
| 07/30165777 DC : DRAFT AUG 2007 | BS EN 1097-4 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER |
| DIN EN 1367-7 E : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| 07/30170936 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| 11/30231793 DC : 0 | BS EN 16262 - SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES |
| 07/30165783 DC : DRAFT AUG 2007 | BS EN 1097-7 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
| BS EN 1744-8:2012 | Tests for chemical properties of aggregates Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| NF EN 15600-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| 07/30165774 DC : DRAFT AUG 2007 | BS EN 933-4 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
| DIN EN 933-11:2011-05 | Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate (includes Corrigendum AC:2009) |
| NF EN 15599-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| PREN 933-6 : DRAFT 2011 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
| 18/30368675 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| 15/30326284 DC : 0 | BS EN 16907-2 - EARTHWORKS - PART 2: CLASSIFICATION OF MATERIALS |
| I.S. CEN TR 15310-4:2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY |
| DIN EN 933-4:2015-01 | Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| DIN EN 1097-7:2008-06 | Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
| DIN EN 1097-3:1998-06 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS |
| DIN EN 14063-1:2016-10 (Draft) | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016 |
| DIN EN 1097-9:2014-03 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
| BS EN 12697-11:2012 | Bituminous mixtures. Test methods for hot mix asphalt Determination of the affinity between aggregate and bitumen |
| BS EN 1744-1 : 2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN 933-4:2008 | Tests for geometrical properties of aggregates Determination of particle shape. Shape index |
| UNE-EN 933-3:2012 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
| UNI EN 1097-8 : 2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| BS EN 933-10:2009 | Tests for geometrical properties of aggregates Assessment of fines. Grading of filler aggregates (air jet sieving) |
| UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| UNE-EN 1744-1:2010 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
| EN 12697-11:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen |
| I.S. EN 12697-11:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
| BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
| BS EN 1367-2:2009 | Tests for thermal and weathering properties of aggregates Magnesium sulfate test |
| UNI EN 12697-11 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
| BS EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing |
| UNE-EN 1097-6:2014 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| BS EN 1744-4:2005 | Tests for chemical properties of aggregates Determination of water susceptibility of fillers for bituminous mixtures |
| BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
| BS EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption |
| UNE-EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| BS EN 933-8 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
| BS EN 13179-2:2000 | Test for filler aggregate used in bituminous mixtures Bitumen number |
| I.S. EN 1097-8:2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| UNE-EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| BS EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates Determination of drying shrinkage |
| EN 1367-6:2008 | Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
| UNI EN 933-9 : 2013 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
| EN 14317-1:2004 | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 1744-1:2009+A1:2012 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
| EN 14316-1:2004 | Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 1367-7:2014 | Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates |
| UNI EN 1097-6 : 2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
| EN 933-8:2012+A1:2015 | Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 15600-1:2010 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 1367-8:2014 | Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates |
| ONORM EN 1744-4 : 2005 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
| EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage |
| EN 1744-6:2006 | Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement |
| EN 15599-1:2010 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 1367-2:2009 | Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
| EN 1744-7:2012 | Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
| EN 933-9:2009+A1:2013 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
| EN 1744-5:2006 | Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts |
| EN 933-4:2008 | Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
| EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
| EN 933-6:2014 | Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates |
| EN 1744-3:2002 | Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates |
| EN 933-3:2012 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
| EN 933-10:2009 | Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) |
| EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
| EN 1744-8:2012 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| UNE-EN 15732:2014 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
| 06/30158376 DC : 0 | BS EN 15599-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| 04/30088146 DC : DRAFT FEB 2004 | EN 1744-5 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS |
| DIN EN 1367-6:2008-12 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
| 16/30320762 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| UNE-EN 1744-8:2013 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| 06/30158382 DC : 0 | BS EN 15600-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULATE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN 1367-8:2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| BS EN 15600-1:2010 | Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation |
| PREN 1744-5 : DRAFT 2004 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS |
| UNI EN 1367-6 : 2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
| UNE-EN 1367-7:2015 | Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates |
| PREN 1097-8 : DRAFT 2016 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
| UNI EN 1744-8 : 2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
| I.S. EN 15599-1:2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 15600-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN 1367-7:2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| BS EN 1744-3:2002 | Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| BS EN 1097-10:2014 | Tests for mechanical and physical properties of aggregates Determination of water suction height |
| BS EN 1097-7:2008 | Tests for mechanical and physical properties of aggregates Determination of the particle density of filler. Pyknometer method |
| BS EN 14063-1:2004 | Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the loose-fill products before installation |
| BS EN 13043:2013 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
| UNE-EN 1097-10:2015 | Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
| BS EN 13179-1:2013 | Tests for filler aggregate used in bituminous mixtures Delta ring and ball test |
| BS EN 1744-5:2006 | Tests for chemical properties of aggregates Determination of acid soluble chloride salts |
| EN 13055:2016 | Lightweight aggregates |
| EN 13179-2:2000 | Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number |
| I.S. EN 1744-4:2005 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
| DIN EN 13055-2:2004-09 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| DIN EN 13055-1:2002-08 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| DIN EN 1097-10:2003-03 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
| DIN EN 14063-1:2004-11 | Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004 |
| I.S. EN 1097-10:2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
| EN 13286-1:2003 | Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling |
| EN 1744-4:2005 | Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
| UNE-EN 933-9:2010 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
| PREN 932-5 : DRAFT 2009 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| EN 932-1:1996 | Tests for general properties of aggregates - Part 1: Methods for sampling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.