EN 892:2012+A1:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
Superseded date
11-22-2021
Superseded by
Published date
08-17-2016
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements
5 Test methods
6 Marking
7 Information to be supplied by the manufacturer
Annex A (informative) - Standards on mountaineering
equipment
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 89/686/EEC
Personal Protective Equipment
This European Standard specifies safety requirements and test methods for dynamic ropes (single, half and twin ropes) in kernmantel construction for use in mountaineering including climbing.
| Committee |
CEN/TC 136
|
| DevelopmentNote |
Supersedes PREN 892. (09/2012) 2012 Edition Re-Issued in August 2016 & incorporates AMD 1 2016. (08/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 892 : 2016 | Identical |
| NBN EN 892 : 2012 + A1 2016 | Identical |
| NS EN 892 : 2012 + A1 2016 | Identical |
| SN EN 892+A1:2016 | Identical |
| NF EN 892 : 2012 + A1 2016 | Identical |
| DIN EN 892:2012-11 | Identical |
| NEN EN 892 : 2012 + A1 2016 | Identical |
| UNI EN 892 : 2012 | Identical |
| I.S. EN 892:2012 | Identical |
| BS EN 892 : 2012 | Identical |
| PN EN 892 : 2013 + A1 2016 | Identical |
| DS EN 892 : 2012 + A1 2016 | Identical |
| DIN EN 892:1996-11 | Identical |
| UNE-EN 892:2013+A1:2017 | Identical |
| UNE-EN 892:2013 | Identical |
| UNI EN 892:2016 | Identical |
| 12/30268675 DC : 0 | BS EN 958 - MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS |
| 07/30129759 DC : DRAFT SEP 2007 | BS EN 15151 - MOUNTAINEERING EQUIPMENT - BRAKING DEVICES - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 15151-2:2012 | MOUNTAINEERING EQUIPMENT - BRAKING DEVICES - PART 2: MANUAL BRAKING DEVICES, SAFETY REQUIREMENTS AND TEST METHODS |
| NF EN ISO 10862 : 2009 | SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS |
| PREN 358 : DRAFT 2015 | PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS AND LANYARDS FOR WORK POSITIONING OR RESTRAINT |
| UNE-EN 15151-1:2012 | Mountaineering equipment - Braking devices - Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
| 03/103084 DC : DRAFT FEB 2003 | EN 1497 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES |
| ASTM E 2505 : 2007 | Standard Practice for Industrial Rope Access |
| I.S. EN 15151-1:2012 | MOUNTAINEERING EQUIPMENT - BRAKING DEVICES - PART 1: BRAKING DEVICES WITH MANUALLY ASSISTED LOCKING, SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 358:2000 | PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS FOR WORK POSITIONING AND RESTRAINT AND WORK POSITIONING LANYARDS |
| I.S. EN ISO 12401:2009 | SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 12277:2016-02 | MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS |
| PREN 1909 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
| ASTM E 2505 : 2007 : R2014 | Standard Practice for Industrial Rope Access |
| DIN EN 12278:2007-08 | Mountaineering equipment - Pulleys - Safety requirements and test methods |
| DIN EN 12492:2012-04 | MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 813:1997 | Personal protective equipment for prevention of falls from a height. Sit harnesses |
| UNE-EN 354:2011 | Personal fall protection equipment - Lanyards |
| BS EN 354:2010 | Personal fall protection equipment. Lanyards |
| BS EN 361:2002 | Personal protective equipment against falls from a height. Full body harnesses |
| BS EN 12492:2012 | Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods |
| BS EN 1497:2007 | Personal fall protection equipment. Rescue harnesses |
| BS EN 1498:2006 | Personal fall protection equipment. Rescue loops |
| EN 1095 : 1998 | DECK SAFETY HARNESS AND SAFETY LINE FOR USE ON RECREATIONAL CRAFT - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 12278:2007 | Montaineering equipment - Pulleys - Safety requirements and test methods |
| EN ISO 12401:2009 | Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009) |
| BS EN 12277 : 2015 | MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 1095:1998 | DECK SAFETY HARNESS AND SAFETY LINE FOR USE ON RECREATIONAL CRAFT - SAFETY REQUIREMENTS AND TEST METHODS |
| 14/30310789 DC : 0 | BS EN 565 - MOUNTAINEERING EQUIPMENT - TAPE - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 12401:2010-01 | Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009) |
| BS EN 15151-2:2012 | Mountaineering equipment. Braking devices Manual braking devices, safety requirements and test methods |
| BS EN ISO 12401:2009 | Small craft. Deck safety harness and safety line. Safety requirements and test methods |
| PREN 565 : DRAFT 2014 | MOUNTAINEERING EQUIPMENT - TAPE - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 15151-1:2012-10 | MOUNTAINEERING EQUIPMENT - BRAKING DEVICES - PART 1: BRAKING DEVICES WITH MANUALLY ASSISTED LOCKING, SAFETY REQUIREMENTS AND TEST METHODS |
| 02/565328 DC : 0 | EN 813 - PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTION OF FALLS FROM A HEIGHT - SIT HARNESSES |
| UNE-EN ISO 10862:2010 | Small craft - Quick release system for trapeze harness (ISO 10862:2009) |
| UNI EN 15151-1 : 2012 | MOUNTAINEERING EQUIPMENT - BRAKING DEVICES - PART 1: BRAKING DEVICES WITH MANUALLY ASSISTED LOCKING, SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 10333-4:2002 | Personal fall-arrest systems — Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester |
| EN 358:1999 | Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards |
| ASTM E 2505 : 2007 : R2014 : EDT 1 | Standard Practice for Industrial Rope Access (Withdrawn 2023) |
| DIN EN 12270:2014-03 | MOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 1498:2007-01 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LOOPS |
| DIN EN 1497:2007-10 | Personal fall protection equipment - Rescue harnesses |
| BS EN 958:2017 | Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods |
| I.S. EN 813:2008 | PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES |
| I.S. EN 567:2013 | MOUNTAINEERING EQUIPMENT - ROPE CLAMPS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 1909:2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
| I.S. EN 12492:2012 | MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 1497:2007 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES |
| I.S. EN 1498:2006 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LOOPS |
| I.S. EN 12278:2007 | MOUNTAINEERING EQUIPMENT - PULLEYS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 354:2010 | PERSONAL FALL PROTECTION EQUIPMENT - LANYARDS |
| I.S. EN 12270:2013 | MOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 795:2012 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
| UNI EN 567 : 2013 | MOUNTAINEERING EQUIPMENT - ROPE CLAMPS - SAFETY REQUIREMENTS AND TEST METHODS |
| 13/30277460 DC : 0 | BS EN 1909 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
| I.S. EN ISO 10862:2009 | SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS |
| UNE-EN 15151-2:2012 | Mountaineering equipment - Braking devices - Part 2: Manual braking devices, safety requirements and test methods |
| 11/30247808 DC : 0 | BS EN 12270 - MOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 12277:2015 | Mountaineering equipment - Harnesses - Safety requirements and test methods |
| PREN 795 : DRAFT 2009 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
| BS EN 358:2000 | Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards |
| DIN EN 12841:2006-11 | Personal fall protection equipment - Rope access systems - Rope adjustment devices |
| DIN EN 1909:2013-04 (Draft) | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
| DIN EN 795:2012-10 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
| DIN EN 813:2008-11 | Personal fall protection equipment - Sit harnesses; German version EN 813:2008 |
| DIN EN 567:2013-06 | Mountaineering equipment - Rope clamps - Safety requirements and test methods; German version EN 567:2013 |
| DIN EN 354:2010-11 | Personal fall protection equipment - Lanyards |
| BS EN 795:2012 | Personal fall protection equipment. Anchor devices |
| EN 1891:1998 | Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes |
| EN 813:2008 | Personal fall protection equipment - Sit harnesses |
| UNI EN 813 : 2008 | PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES |
| UNI EN 1497 : 2008 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES |
| UNI EN 12492 : 2012 | MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 354 : 2010 | PERSONAL FALL PROTECTION EQUIPMENT - LANYARDS |
| UNI EN 12270 : 2014 | MOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN ISO 10862:2009 | Small craft. Quick release system for trapeze harness |
| UNI EN 15151-2 : 2012 | MOUNTAINEERING EQUIPMENT - BRAKING DEVICES - PART 2: MANUAL BRAKING DEVICES, SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 12401 : 2009 | SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS |
| 11/30247805 DC : 0 | BS EN 567 - MOUNTAINEERING EQUIPMENT - ROPE CLAMPS - SAFETY REQUIREMENTS AND TEST METHODS |
| 03/103085 DC : DRAFT FEB 2003 | EN 1498 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LOOPS |
| 14/30293325 DC : 0 | BS EN ISO 15085 - SMALL CRAFT - MAN-OVERBOARD PREVENTION AND RECOVERY |
| UNI EN ISO 10862 : 2009 | SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS |
| BS EN 15151-1:2012 | Mountaineering equipment. Braking devices Braking devices with manually assisted locking, safety requirements and test methods |
| A-A-59835 Revision A:2013 | Rope, Kernmantle |
| DIN EN ISO 10862:2009-10 | SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS |
| UNE-EN ISO 12401:2010 | Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009) |
| UNE-EN 12277:2016 | Mountaineering equipment - Harnesses - Safety requirements and test methods |
| UNE-EN 12270:2014 | Mountaineering equipment - Chocks - Safety requirements and test methods |
| UNE-EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
| BS EN 1909:2017 | Safety requirements for cableway installations designed to carry persons. Recovery and evacuation |
| BS EN 12841:2006 | Personal fall protection equipment. Rope access systems. Rope adjustment devices |
| ISO 10862:2009 | Small craft Quick release system for trapeze harness |
| UNE-EN 567:2013 | Mountaineering equipment - Rope clamps - Safety requirements and test methods |
| ISO 12401:2009 | Small craft — Deck safety harness and safety line — Safety requirements and test methods |
| BS EN 567:2013 | Mountaineering equipment. Rope clamps. Safety requirements and test methods |
| UNE-EN 892:2013 | Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods |
| BS EN 12278:2007 | Mountaineering equipment. Pulleys. Safety requirements and test methods |
| UNE-EN 12492:2012 | Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods |
| EN 1497:2007 | Personal fall protection equipment - Rescue harnesses |
| EN 15151-1:2012 | Mountaineering equipment - Braking devices - Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
| EN 361:2002 | Personal protective equipment against falls from a height - Full body harnesses |
| EN 567:2013 | Mountaineering equipment - Rope clamps - Safety requirements and test methods |
| EN 1498:2006 | Personal fall protection equipment - Rescue loops |
| EN 15151-2:2012 | Mountaineering equipment - Braking devices - Part 2: Manual braking devices, safety requirements and test methods |
| EN 958:2017 | Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods |
| EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
| EN ISO 10862:2009 | Small craft - Quick release system for trapeze harness (ISO 10862:2009) |
| EN 354:2010 | Personal fall protection equipment - Lanyards |
| EN 795:2012 | Personal fall protection equipment - Anchor devices |
| DIN EN 15151-2:2012-10 | MOUNTAINEERING EQUIPMENT - BRAKING DEVICES - PART 2: MANUAL BRAKING DEVICES, SAFETY REQUIREMENTS AND TEST METHODS |
| 15/30329088 DC : 0 | BS EN 358 - PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS AND LANYARDS FOR WORK POSITIONING OR RESTRAINT |
| PREN 12270 : DRAFT 2011 | MOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS |
| 01/561688 DC : DRAFT APR 2001 | ISO/DIS 12401 - SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE FOR USE ON RECREATIONAL CRAFT - SAFETY REQUIREMENTS AND TEST METHODS |
| PREN 567 : DRAFT 2011 | MOUNTAINEERING EQUIPMENT - ROPE CLAMPS - SAFETY REQUIREMENTS AND TEST METHODS |
| PREN 12277 : DRAFT 2014 | MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS |
| 06/30111976 DC : 0 | EN 354 - PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTION OF FALLS FROM HEIGHT - LANYARDS |
| 14/30301155 DC : 0 | BS EN 12277 - MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS |
| 09/30192714 DC : 0 | BS EN 795 - PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
| NF EN ISO 12401 : 2009 | SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 10333-2:2000 | Personal fall-arrest systems — Part 2: Lanyards and energy absorbers |
| I.S. EN 12277:2015+A1:2018&LC:2019 | MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 10333-3:2000 | Personal fall-arrest systems — Part 3: Self-retracting lifelines |
| BS EN 1891:1998 | Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes |
| BS EN 12270:2013 | Mountaineering equipment. Chocks. Safety requirements and test methods |
| BS EN 1095:1998 | Deck safety harness and safety line for use on recreational craft. Safety requirements and test methods |
| EN 12492:2012 | Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods |
| DIN EN 361:2002-09 | PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - FULL BODY HARNESSES |
| EN 12270:2013 | Mountaineering equipment - Chocks - Safety requirements and test methods |
| EN 12841:2006 | Personal fall protection equipment - Rope access systems - Rope adjustment devices |
| I.S. EN 12841:2006 | PERSONAL FALL PROTECTION EQUIPMENT - ROPE ACCESS SYSTEMS - ROPE ADJUSTMENT DEVICES |
| ONORM EN 12841 : 2006 | PERSONAL FALL PROTECTION EQUIPMENT - ROPE ACCESS SYSTEMS - ROPE ADJUSTMENT DEVICES |
| NBR 16325-1 : 2014 | PROTECTION AGAINST FALLS FROM A HEIGHT - PART 1: ANCHOR DEVICES TYPES A, B AND D |
| ONORM EN 813 : 2008 | PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES |
| NBR 16325-2 : 2014 | PROTECTION AGAINST FALLS FROM A HEIGHT - PART 2: ANCHOR DEVICES TYPE C |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6487:2015 | Road vehicles — Measurement techniques in impact tests — Instrumentation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.