EN 806-4:2010
Current
Current
The latest, up-to-date edition.
Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
Published date
03-10-2010
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Work on site
5 Dissimilar metals
6 Commissioning
Annex A (normative) - Pipe system material specifications,
jointing procedures and pipe installation for different
types of materials
Annex B (informative) - Calculation and compensation for thermal
effects of pipes
Annex C (informative) - Recommended maximum spacings of fixings
for metal pipes
Bibliography
This European Standard specifies requirements and gives recommendations for the installation of potable water installations within buildings and for pipework outside buildings but within the premises in accordance with EN 806-1. This European Standard is applicable to new installations, alterations and repairs.
| Committee |
CEN/TC 164
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 806-4:2010-06 | Identical |
| NF EN 806-4 : 2010 | Identical |
| NEN EN 806-4 : 2010 | Identical |
| I.S. EN 806-4:2010 | Identical |
| NBN EN 806-4 : 2010 | Identical |
| BS EN 806-4:2010 | Identical |
| NS EN 806-4 : 2010 | Identical |
| UNI EN 806-4 : 2010 | Identical |
| PN EN 806-4 : 2010 | Identical |
| UNE-EN 806-4:2010 | Identical |
| PREN 1487 : DRAFT 2012 | BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| NF EN 806-5 : 2012 | SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE |
| DIN EN 1487:2000-06 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| I.S. EN 1487:2014 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| UNI CEN/TR 16355 : 2012 | RECOMMENDATIONS FOR PREVENTION OF LEGIONELLA GROWTH IN INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION |
| S.R. CEN/TR 16355:2012 | RECOMMENDATIONS FOR PREVENTION OF LEGIONELLA GROWTH IN INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION |
| DIN EN 1487:2014-09 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| UNI EN 1487 : 2014 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| 17/30362689 DC : 0 | BS EN 16941-2 - ON-SITE NON-POTABLE WATER SYSTEMS - PART 2: SYSTEMS FOR THE USE OF TREATED GREYWATER |
| DIN EN 806-5:2012-04 | Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance |
| BS EN 806-5:2012 | Specifications for installations inside buildings conveying water for human consumption Operation and maintenance |
| BS EN 1487:2014 | Building valves. Hydraulic safety groups. Tests and requirements |
| EN 1487:2014 | Building valves - Hydraulic safety groups - Tests and requirements |
| EN 806-5:2012 | Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance |
| 13/30268239 DC : 0 | BS EN 1487 - BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| UNI EN 806-5 : 2012 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE |
| I.S. EN 806-5:2012 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE |
| UNE-EN 806-5:2013 | Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance |
| CEN/TR 16355:2012 | Recommendations for prevention of Legionella growth in installations inside buildings conveying water for human consumption |
| EN 10240:1997 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| EN 1514-1:1997 | Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
| EN 817:2008 | Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications |
| EN ISO 7091:2000 | Plain washers - Normal series - Product grade C (ISO 7091:2000) |
| EN 13443-1:2002+A1:2007 | Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing |
| EN 12502-1:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General |
| EN ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) |
| ISO 15874-3:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings |
| EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| ISO 15877-3:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| ISO 4016:2011 | Hexagon head bolts Product grade C |
| EN 12502-4:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels |
| ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
| EN ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008) |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| EN 12502-3:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials |
| EN 805:2000 | Water supply - Requirements for systems and components outside buildings |
| EN 15161:2006 | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
| EN 751-2:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| ISO 9454-1:2016 | Soft soldering fluxes Classification and requirements Part 1: Classification, labelling and packaging |
| EN 12502-5:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| EN 1044 : 1999 | BRAZING - FILLER METALS |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
| EN 12502-2:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys |
| EN ISO 9453:2014 | Soft solder alloys - Chemical compositions and forms (ISO 9453:2014) |
| EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
| ISO 7091:2000 | Plain washers Normal series Product grade C |
| EN 29454-1:1993 | Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:1990) |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| EN 751-1:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
| ISO 9453:2014 | Soft solder alloys Chemical compositions and forms |
| EN 200:2008 | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings |
| ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings |
| EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| EN 1111:2017 | Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN ISO 15874-3:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013) |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.