EN 773:1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
01-01-2011
04-21-1999
Foreword
1 Scope
2 Normative references
3 Definitions, symbols and abbreviations
4 Functional and dimensional requirements
4.1 Dimensions of pipes and fittings
4.1.1 Nominal sizes
4.1.2 Internal diameters and limit deviations
4.2 Geometry of pipes
4.3 Geometry of fittings
4.3.1 General
4.3.2 Bends
4.3.3 Branches
4.4 Smoothness of bore
4.5 Appearance and soundness
4.6 Longitudinal bending moment resistance
4.7 Interconnection
4.8 Corrosion resistance
4.9 Abrasion resistance
4.10 Modification
4.11 Coatings and linings
4.12 Long-term behaviour
4.13 Durability
4.14 Sealing elements
4.15 Mechanical strength
4.16 Pressure classes for pipes, fittings and joints
4.17 Watertightness
4.17.1 Seals for joints
4.17.2 Rigid joints
4.17.3 Adjustable joints
4.17.4 Flexible joints
4.18 Restrained joints
4.19 Temperature
4.20 Dimensional stability
5 Test methods
5.1 Measurement of diameters and wall thicknesses
5.1.1 Mean internal diameter of barrels
5.1.2 Mean external diameter of barrels
5.1.3 Wall thickness of barrels
5.2 Measurement of deviation from straightness of
barrels
5.3 Measurement of deviation from squareness of the
ends of the pipes
5.4 Longitudinal bending moment resistance test for
pipes
5.5 Crushing test for pipes with rigid behaviour
5.6 Stiffness test for pipes with flexible behaviour
5.7 Pressure tests
5.7.1 Test for pipes
5.7.2 Test for joints
5.7.3 Test for restrained joints
5.8 Tests for fittings
6 Quality control
7 Marking
This European Standard specifies general requirements for components for use in hydraulically pressurized discharge pipes, drains and sewers. This European Standard provides the general basis for the preparation or revision of product standards. Some of its provisions may need modification when drafting harmonized European Standards. It is not applicable for evaluation of products.
Committee |
CEN/TC 165
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
DIN EN 773:1999-06 | Identical |
SN EN 773 : 1999 | Identical |
BS EN 773:1999 | Identical |
NS EN 773 : 1ED 1999 | Identical |
I.S. EN 773:1999 | Identical |
PN EN 773 : 2002 | Identical |
UNE-EN 773:1999 | Identical |
NF EN 773 : 1999 | Identical |
UNI EN 773 : 2002 | Identical |
NEN EN 773 : 1999 | Identical |
NBN EN 773 : 1ED 99 | Identical |
02/103343 DC : DRAFT MAY 2002 | PREN 14457 - GENERAL REQUIREMENTS FOR COMPONENTS SPECIFICALLY DESIGNED FOR USE IN TRENCHLESS CONSTRUCTION OF DRAINS AND SEWERS |
CEN/TR 12566-2:2005 | Small wastewater treatment systems for up to 50 PT - Part 2: Soil infiltration systems |
DIN EN 1456-1:2001-12 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPING COMPONENTS AND THE SYSTEM |
03/117538 DC : DRAFT NOV 2003 | EN 14801 - CONDITIONS FOR PRESSURE CLASSIFICATION OF PRODUCTS FOR WATER AND WASTE WATER PIPELINES |
I.S. CEN/TR 12566-2:2005 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 2: SOIL INFILTRATION SYSTEMS |
05/30131069 DC : DRAFT MAR 2005 | EN 598:2005 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
CEN/TS 1456-2:2003 | Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
DD CEN/TS 1456-2:2003 | Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
DIN EN 598:2009-10 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
BS EN 598 : 2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
I.S. EN 598:2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
UNI EN 598 : 2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
PD CEN/TR 15128:2005 | Survey of European standards for rehabilitation of drain and sewer systems |
BS EN 14801:2006 | Conditions for pressure classification of products for water and wastewater pipelines |
BS EN 12056-2:2000 | Gravity drainage systems inside buildings Sanitary pipework, layout and calculation |
EN 1456-1 : 2001 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPING COMPONENTS AND THE SYSTEM |
EN 14801:2006 | Conditions for pressure classification of products for water and wastewater pipelines |
EN 14457:2004 | General requirements for components specifically designed for use in trenchless construction of drains and sewers |
EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
05/30138598 DC : 0 | EN 752 - DRAIN AND SEWER SYSTEMS FOR OUTSIDE BUILDINGS |
I.S. CEN TS 1456-2:2003 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. CEN TR 15128:2005 | SURVEY OF EUROPEAN STANDARDS FOR REHABILITATION OF DRAIN AND SEWER SYSTEMS |
BS EN 14457:2004 | General requirements for components specifically designed for use in trenchless construction of drains and sewers |
CEN/TR 15128:2005 | Survey of European Standards for rehabilitation of drain and sewer systems |
DIN EN 14801:2006-09 | CONDITIONS FOR PRESSURE CLASSIFICATION OF PRODUCTS FOR WATER AND WASTEWATER PIPELINES |
DIN EN 14457:2004-09 | General requirements for components specifically designed for use in trenchless construction of drains and sewers |
EN 45011:1998 | General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
EN 45011 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.