EN 746-2:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
Withdrawn date
05-31-2011
Published date
05-12-2010
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements, measures and verification means
6 Verification of the safety requirements and/or measures
7 Information for Use
Annex A (informative) - Typical Examples of IThE, Fuels
and Burners
Annex B (informative) - Technical terms
Annex C (informative) - Typical examples of piping and
components
Annex D (informative) - Methods for burner start-up
Annex E (normative) - Maximum allowable pressure
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
This part of EN 746 together with EN 746-1 specifies safety requirements for single and multiple burners that are part of Industrial Thermoprocessing Equipment. (In this standard referred to as IThE).This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems that are part of IThE as listed in Clause 4, when used as intended and under the conditions foreseen by the manufacturer.This European Standard covers:- fuel pipework downstream of and including the manual isolating valve;- burner(s), burner system and ignition device;- safety related control system (protective system).This European Standard applies to any oxidation with air or other gases containing free oxygen of gaseous, liquid and solid fuels or any combustion of them to release thermal energy.For thermal or catalytic post combustion and waste incineration, this European Standard applies only to auxiliary burners designed to start-up and/or support the process.The pressure hazard of the piping and components covered by this standard is within the maximum pressure/size relationship of category I as described in normative Annex D.This European Standard also gives the necessary requirements for the information for use.This European Standard does not cover hazards from heating generated by electricity.This European Standard does not deal with the hazards created by the release of flammable substances from the products processed in the IThE.NOTE EN 1539, Dryers and ovens, in which flammable substances are released — Safety requirements This European Standard is not applicable to combustion and fuel handling systems- of welding and soldering machines;- up-stream of the IThE manual isolating valve.This European Standard is not applicable to electricity cabling and power cabling upstream of the IThE control panel/protective system.Noise can be a significant hazard for combustion and fuel handling systems.
| Committee |
CEN/TC 186
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| UNE-EN 746-2:1997 | Identical |
| PN EN 746-2 : 2010 | Identical |
| SN EN 746-2 : 2010 | Identical |
| NEN EN 746-2 : 2010 | Identical |
| I.S. EN 746-2:2010 | Identical |
| NBN EN 746-2 : 2010 | Identical |
| BS EN 746-2:2010 | Identical |
| NS EN 746-2 : 2010 | Identical |
| DIN EN 746-2:2011-02 | Identical |
| UNI EN 746-2 : 2011 | Identical |
| NF EN 746-2 : 2010 | Identical |
| UNE-EN 746-2:2011 | Identical |
| ONORM EN 746-2 : 2011 | Identical |
| 12/30243081 DC : 0 | BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
| BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
| DIN EN 1034-16:2012-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| I.S. EN 1034-16:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| S.R. CEN/TR 16787:2014 | INDUSTRIAL GAS INSTALLATION - GUIDELINE |
| I.S. EN 1034-17:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| I.S. EN 15061:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| DIN EN 746-8:2001-04 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT |
| DIN EN 13355:2010-06 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| DIN EN 746-3:2010-02 | Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases (includes Amendment A1:2009) |
| BS EN 710 : 1998 | SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| BS EN 12921-2 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS |
| I.S. EN 12921-1:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
| EN 1034-17:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
| EN 12921-2:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids |
| EN 746-3:1997+A1:2009 | Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases |
| EN 1247:2004+A1:2010 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
| EN 12921-1:2005+A1:2010 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
| EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
| EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements |
| CEN/TR 16787:2014 | Industrial Gas Installation - Guideline |
| BS EN 1034-16:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Paper and board making machines |
| UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| 09/30180290 DC : 0 | BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| PREN 1539 : DRAFT 2012 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| BS EN 15061 : 2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| PREN 16985 : DRAFT 2016 | SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| DIN EN 746-5:2001-04 | Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment; English version of DIN EN 746-5 |
| DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 746-1:2010-02 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009) |
| DIN EN 1643:2014-09 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| DIN EN 1547:2010-02 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment (includes Amendment A1:2009) |
| DIN EN ISO 10472-4:2009-09 | Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| DIN EN ISO 10472-3:2009-10 | Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| BS EN 13355 : 2004 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| ISO 10472-4:1997 | Safety requirements for industrial laundry machinery Part 4: Air dryers |
| BS EN ISO 10472-3:2008 | Safety requirements for industrial laundry machinery Washing tunnel lines including component machines |
| I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 1643:2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| DIN EN 1643:2001-02 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| I.S. EN ISO 10472-4:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN ISO 10472-1:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 1547:2001 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| I.S. EN 746-1:1997 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT |
| I.S. EN 1539:2015 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| I.S. EN 13355:2005 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| DIN EN 1539:2016-02 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| I.S. EN 1247:2004 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| I.S. EN 12921-2:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS |
| I.S. EN 746-3:1997 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES |
| I.S. EN 12753:2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 710:1998 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| I.S. EN ISO 10472-3:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 3: WASHING TUNNEL LINES INCLUDING COMPONENT MACHINES |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN ISO 10472-3 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 3: WASHING TUNNEL LINES INCLUDING COMPONENT MACHINES |
| VDI 3891:2015-07 | Emission control - Human cremation facilities |
| 17/30356406 DC : 0 | BS EN 17116-2 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS |
| 09/30201246 DC : 0 | BS EN 710:1997/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT ASSOCIATED EQUIPMENT |
| DIN EN 14677:2008-11 | SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| DIN EN 15061:2009-05 | Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008) |
| 12/30258755 DC : 0 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| BS EN 1034-17:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
| PD CEN/TR 16787:2014 | Industrial Gas Installation. Guideline |
| BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
| UNI EN 1034-16 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| DIN EN 12921-1:2011-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010) |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 1247:2010-12 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines (includes Amendment A1:2010) |
| DIN EN ISO 10472-1:2009-10 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| DIN EN 746-4:2000-05 | Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment; English version of DIN EN 746-4 |
| UNE-EN 710:1998 | SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT. |
| BS EN 746-8:2000 | Industrial thermoprocessing equipment Particular safety requirements for quenching equipment |
| BS EN 746-1 : 1997 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT |
| BS EN 746-3 : 1997 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES |
| BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| BS EN 12753 : 2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 267 : 2011 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| EN 746-4:2000 | Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment |
| UNI EN 12921-1 : 2010 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| UNI EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| UNI EN 12581 : 2010 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 1643 : 2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| UNI EN 12921-2 : 2009 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS |
| UNI EN 746-3 : 2009 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES |
| UNI EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNI EN 710 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| UNI EN 1247 : 2010 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| UNI EN 12753 : 2010 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN ISO 10472-1 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| UNI EN ISO 10472-4 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS |
| UNI EN 13355 : 2009 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| BS EN 1247 : 2004 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| UNI EN 1547 : 2009 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT |
| UNI EN 746-1 : 2009 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT |
| UNI EN 1034-17 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| 11/30243078 DC : 0 | BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| DIN EN 1034-17:2012-11 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
| I.S. EN 14677:2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| 16/30335146 DC : 0 | BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 12753:2011-02 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010) |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ISO 23551-4:2005 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 710:2010-10 | Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment (includes Amendment A1:2010) |
| BS EN 1547 : 2001 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT |
| UNE-EN 1539:2010 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| BS EN 746-4:2000 | Industrial thermoprocessing equipment Particular safety requirements for hot dip galvanizing thermoprocessing equipment |
| BS EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances. Valve proving systems for automatic shut-off valves |
| UNE-EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| UNE-EN 1247:2005 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines |
| BS EN 1539:2015 | Dryers and ovens, in which flammable substances are released. Safety requirements |
| EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
| EN ISO 10472-4:2008 | Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) |
| EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
| EN 1547:2001+A1:2009 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| EN 746-8:2000 | Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment |
| EN 746-1:1997+A1:2009 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
| EN 1539:2015 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
| EN ISO 10472-3:2008 | Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
| EN 746-5:2000 | Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment |
| EN 14677:2008 | Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
| EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| BS EN 14677:2008 | Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| API 556 : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
| PREN 17116-2 : DRAFT 2017 | SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS |
| API 556 REDLINE : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 12921-2:2010-01 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids (includes Amendment A1:2008) |
| BS EN ISO 10472-4:2008 | Safety requirements for industrial laundry machinery Air dryers |
| ISO 10472-3:1997 | Safety requirements for industrial laundry machinery Part 3: Washing tunnel lines including component machines |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 746-5:2000 | Industrial thermoprocessing equipment Particular safety requirements for salt bath thermoprocessing equipment |
| BS EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery Common requirements |
| BS EN 12921-1 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 1034-16:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines |
| UNE-EN 746-1:1997 | INDUSTRIAL THERMOPROCESSING EQUIPMENT. PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT. |
| EN 730-2:2002 | Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN 1539:2015 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| EN 746-1:1997+A1:2009 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
| EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| EN 264 : 1991 | SAFETY SHUT OFF DEVICES FOR COMBUSTION PLANTS USING LIQUID FUELS - SAFETY REQUIREMENTS AND TESTING |
| IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
| EN ISO 19879:2010 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| EN ISO 8434-4 : 2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| EN 12067-2:2004 | Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| EN 61558-1:2005/A1:2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| EN 50370-2:2003 | Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity |
| EN 12067-1 : 98 AMD 1 2003 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV | Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control |
| ISO 7005-3:1988 | Metallic flanges Part 3: Copper alloy and composite flanges |
| EN 751-2:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
| EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| EN 13480-1:2017 | Metallic industrial piping - Part 1: General |
| IEC 61810-1:2015 | Electromechanical elementary relays - Part 1: General and safety requirements |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
| EN 1797:2001 | Cryogenic vessels - Gas/material compatibility |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| EN 1854:2010 | Pressure sensing devices for gas burners and gas burning appliances |
| EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation |
| EN 12300 : 1998 AMD 1 2006 | CRYOGENIC VESSELS - CLEANLINESS FOR CRYOGENIC SERVICE |
| EN 12952-8:2002 | Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN 125:2010+A1:2015 | Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
| EN 60947-4-1 : 2010 AMD 1 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 19879:2010 | Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
| IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
| EN 62061:2005/A2:2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
| EN 10241:2000 | Steel threaded pipe fittings |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60439-1:1999+AMD1:2004 CSV | Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
| EN 230:2005 | Automatic burner control systems for oil burners |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| ISO 8434-4:1995 | Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples |
| EN 751-1:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
| EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| EN 730-1:2002 | Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| EN 1547:2001+A1:2009 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| EN 50370-1:2005 | Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
| EN 13480-5:2017 | Metallic industrial piping - Part 5: Inspection and testing |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| ENV 14459 : DRAFT 2002 | METHOD OF RISK ANALYSIS AND RECOMMENDATIONS FOR THE USE OF ELECTRONICS IN SYSTEMS FOR THE CONTROL OF GAS BURNERS AND GAS BURNING APPLIANCES |
| EN 88-1:2011+A1:2016 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
| EN 12078:1998 | Zero governors for gas burners and gas burning appliances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.