EN 737-1 : 1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM
Superseded date
07-01-2008
Superseded by
Published date
01-12-2013
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Terminology
5 General requirements
6 Test methods
7 Marking, colour coding and packaging
8 Information to be supplied by the manufacturer
Annex A (informative) Bibliography
Annex B (informative) Rationale
Annex C (normative) Special national conditions
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other
provisions of EU Directives
Defines requirements for terminal units for use in medical gas pipeline systems defined in prEN 737-3 to be used with oxygen, nitrous oxide, air for breathing, carbon dioxide, oxygen/nitrous oxide mixture [50%/50% (V/V)], air for driving surgical tools, nitrogen for driving surgical tools and vacuum. It is intended to ensure the gas specific assembly of terminal units and for prevention of their interchange between different gases.
| Committee |
TC 215
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NEN EN 737-1 : 1998 | Identical |
| SN EN 737-1 : 1998 | Identical |
| NS EN 737-1 : 1ED 1998 | Identical |
| NBN EN 737-1 : 1998 | Identical |
| I.S. EN 737-1:1998 | Identical |
| DIN EN 737-1:1998-02 | Identical |
| PN EN 737-1 : 2006 | Identical |
| UNE-EN 737-1:1998 | Identical |
| NF EN 737-1 : 1998 | Identical |
| BS EN 737-1:1998 | Identical |
| UNI EN 737-1 : 1999 | Identical |
| CSA Z10524-3 : 2012 : INC : AMD 1 : 2017 : R201700 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| 04/30084857 DC : DRAFT JUN 2004 | BS EN ISO 10524-1 - PRESSURE REGULATORS FOR USE WITH MEDICAL GAS SYSTEMS - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| CSA Z10524-1 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| 05/30129368 DC : DRAFT AUG 2005 | ISO 9170-2 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| PD CR 13903:2001 | General guidance on the equipment used for inhaled nitric oxide therapy |
| ISO 10524-3:2005 | Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
| ISO 10651-4:2002 | Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators |
| DIN EN 737-3:1998-11 | MEDICAL GAS PIPELINE SYSTEMS - PART 3: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| I.S. EN ISO 10651-4:2009 | LUNG VENTILATORS - PART 4: PARTICULAR REQUIREMENTS FOR OPERATOR-POWERED RESUSCITATORS |
| DIN EN 14931:2006-08 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
| CR 13903:2000 | General guidance on the equipment used for inhaled nitric oxide therapy |
| DIN EN 793 : 1998 | PARTICULAR REQUIREMENTS FOR SAFETY OF MEDICAL SUPPLY UNITS |
| EN 13544-1:2007+A1:2009 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| CSA Z10524-1 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| 04/30088537 DC : DRAFT SEP 2004 | PREN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| CSA Z10524-3 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| DIN EN ISO 10524-1:2006-05 | PRESSURE REGULATORS FOR USE WITH MEDICAL GAS - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| I.S. EN 738-3:1999 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| I.S. EN 740:1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| CSA Z9170.2 : 0 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| BS EN 14931:2006 | Pressure vessels for human occupancy (PVHO). Multi-place pressure chambers for hyperbaric therapy. Performance, safety requirements and testing |
| I.S. ENV 737-6:2003 | MEDICAL GAS PIPELINE SYSTEMS - PART 6: DIMENSIONS AND ALLOCATION OF PROBES FOR TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| 06/30106986 DC : 0 | EN 13718-2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES |
| S.R. CR 13903:2000 | GENERAL GUIDANCE ON THE EQUIPMENT USED FOR INHALED NITRIC OXIDE THERAPY |
| 05/30129363 DC : DRAFT AUG 2005 | ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| BS 5724-2.204(1999) : 1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| 06/30106983 DC : 0 | EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS OF MEDICAL DEVICES USED IN AIR AMBULANCES |
| BS EN ISO 10524-1:2006 | Pressure regulators for use with medical gases Pressure regulators and pressure regulators with flow-metering devices |
| DD ENV 737-6:2003 | Medical gas pipeline systems Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| BS EN ISO 10651-4:2002 | Lung ventilators Particular requirements for operator-powered resuscitators |
| DIN EN 738-1:2002-07 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES |
| DIN EN 794-1:2001-02 | LUNG VENTILATORS - PART 1: PARTICULAR REQUIREMENTS FOR CRITICAL CARE VENTILATORS |
| I.S. EN 794-3:1998 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| DIN EN 1789:2014-12 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| DIN EN 737-3:2000-01 | MEDICAL GAS PIPELINE SYSTEMS - PART 3: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| 06/30116855 DC : 0 | BS ISO 10524-4 - PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT |
| I.S. EN 737-3:1999 | MEDICAL GAS PIPELINE SYSTEMS - PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| I.S. EN ISO 10524-1:2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| UNI EN ISO 10524-3 : 2013 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| DIN EN ISO 10524-3:2013-06 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005 + AMD 1:2013) |
| EN ISO 10524-1:2006 | Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006) |
| DIN EN ISO 10651-4:2009-08 | Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002) |
| DIN EN 13544-1:2009-12 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| I.S. EN 1789:2007 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| EN 1789:2007+A2:2014 | Medical vehicles and their equipment - Road ambulances |
| I.S. EN 13544-1:2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| EN 738-4:1998/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT |
| UNI EN 13544-1 : 2009 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| UNI EN ISO 10651-4 : 2009 | LUNG VENTILATORS - PART 4: PARTICULAR REQUIREMENTS FOR OPERATOR-POWERED RESUSCITATORS |
| UNI EN 794-3 : 2009 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| CSA Z10524-3 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| BS EN ISO 10524-3 : 2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| BS EN ISO 11197:2009 | Medical supply units |
| BS EN 13544-1 : 2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| BS EN 737-3:2000 | Medical gas pipeline systems Pipelines for compressed medical gases and vacuum |
| BS EN 1789 : 2007 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| UNE-EN 1789:2007 | Medical vehicles and their equipment - Road ambulances |
| BS EN 794-3 : 1999 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| BS EN 740:1999 | Anaesthetic workstations and their modules. Particular requirements |
| EN ISO 10651-4:2009 | Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002) |
| EN 738-3:1998/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| EN 737-3:1998/A1:1999 | MEDICAL GAS PIPELINE SYSTEMS - PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| EN 14931:2006 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
| EN 794-3:1998+A2:2009 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators |
| EN 793 : 1997 | PARTICULAR REQUIREMENTS FOR SAFETY OF MEDICAL SUPPLY UNITS |
| EN 739:1998/A1:2002 | LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
| I.S. EN ISO 10524-3:2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005) |
| I.S. EN 738-4:1999 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT |
| I.S. EN 14931:2006 | PRESSURE VESSELS FOR HUMAN OCCUPANCY (PVHO) - MULTI-PLACE PRESSURE CHAMBER SYSTEMS FOR HYPERBARIC THERAPY - PERFORMANCE, SAFETY REQUIREMENTS AND TESTING |
| DIN EN 794-3:2009-12 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators; German version EN 794-3:1998+A2:2009 |
| BS EN 793:1998 | Particular requirements for safety of medical supply units |
| UNI EN 1789 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| ENV 737-6:2003 | Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| UNE-EN 794-3:1999 | LUNG VENTILATORS. PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS. |
| UNE-EN 13544-1:2007 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| EN 739:1998/A1:2002 | LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| EN 737-4 : 1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.