EN 736-3:2008
Current
Current
The latest, up-to-date edition.
Valves - Terminology - Part 3: Definition of terms
Published date
01-30-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.1 Terms relating to pressure and temperature
3.2 Terms relating to dimensions
3.3 Terms relating to design
3.4 Terms relating to flow characteristics
3.5 Terms relating to operation
3.6 Terms relating to tests
Annex A (informative) Glossary
This European standard defines the terms and their definitions (or the source if defined in other European standards) used for several types of valves or in several fields of application. These terms concern the pressures and temperatures, the dimensions, the design, the flow control characteristics and the test of valves.The terms and definitions in this European standard may also apply to products other than valves, in which case it may be necessary to apply these definitions analogously.This European standard covers terms common to more than one type of valve.The terms and definitions specific to one type of valve, or to one application are found in the relevant product standard or fitness for purpose standard.
| Committee |
CEN/TC 69
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PN EN 736-3 : 2010 | Identical |
| UNE-EN 736-3:2008 | Identical |
| NBN EN 736-3 : 2008 | Identical |
| NEN EN 736-3 : 2008 | Identical |
| NF EN 736-3 : 2008 | Identical |
| UNI EN 736-3 : 2008 | Identical |
| SN EN 736-3:2008 | Identical |
| BS EN 736-3:2008 | Identical |
| I.S. EN 736-3:2008 | Identical |
| NS EN 736-3 : 2ED 2008 | Identical |
| DIN EN 736-3:2008-04 | Identical |
| DIN EN 15714-3:2010-02 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| 13/30272812 DC : 0 | BS ISO 9635-5 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 5: CONTROL VALVES |
| 16/30340536 DC : 0 | BS EN 12627 - INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
| I.S. EN 12334:2001 | INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
| I.S. EN 15714-3:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| PREN 1171 : DRAFT 2014 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| 05/30134037 DC : 0 | EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| I.S. EN 16722:2015 | INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH THREADED ENDS |
| BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
| PREN 14141 : DRAFT 2011 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| 01/122758 DC : DRAFT JULY 2001 | ISO/DIS 16135 - INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS |
| BS EN 16767:2016 | Industrial valves. Steel and cast iron check valves |
| BS ISO 9635-5:2014 | Agricultural irrigation equipment. Irrigation valves Control valves |
| DIN CEN/TS 13547:2007-02 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| UNE-EN 16767:2017 | Industrial valves - Steel and cast iron check valves |
| 01/709788 DC : DRAFT JUN 2001 | PREN ISO 21787 - INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTIC MATERIALS |
| 14/30301577 DC : 0 | BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| 01/709786 DC : DRAFT JUN 2001 | PREN ISO 16137 - INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS |
| UNE-EN 13547:2014 | Industrial valves - Copper alloy ball valves |
| DD CEN/TS 13547:2006 | Industrial valves. Copper alloy ball valves |
| PREN 19 : DRAFT 2014 | INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
| ISO 9635-5:2014 | Agricultural irrigation equipment Irrigation valves Part 5: Control valves |
| I.S. EN 13547:2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. EN ISO 16136:2006 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 21787:2006 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16138:2006 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16139:2006 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| I.S. EN ISO 16135:2006 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| ONORM EN ISO 16139 : 2008 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16137:2006 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13709:2010-10 | Industrial valves - Steel globe and globe stop and check valves |
| BS EN 14141:2013 | Valves for natural gas transportation in pipelines. Performance requirements and tests |
| BS EN 12201-4:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Valves |
| UNE-EN 1983:2014 | Industrial valves - Steel ball valves |
| UNE-EN 16722:2016 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| BS EN 1074-4:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Air valves |
| BS EN 12288:2010 | Industrial valves. Copper alloy gate valves |
| BS EN ISO 16135:2006 | Industrial valves. Ball valves of thermoplastic materials |
| BS EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Valves |
| BS EN 1984:2010 | Industrial valves. Steel gate valves |
| BS EN ISO 16139:2006 | Industrial valves. Gate valves of thermoplastic materials |
| I.S. EN 12288:2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| EN 12201-4:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
| EN 1074-4:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves |
| EN 13547:2013 | Industrial valves - Copper alloy ball valves |
| EN 1349:2009 | Industrial process control valves |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element |
| CEN/TS 13547:2006 | Industrial valves - Copper alloy ball valves |
| BS EN 1349:2009 | Industrial process control valves |
| BS EN 15714-1:2009 | Industrial valves. Actuators Terminology and definitions |
| PREN 13774 : DRAFT 2011 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| 15/30322046 DC : 0 | BS EN 736-2 - VALVES - TERMINOLOGY - PART 2: DEFINITION OF COMPONENTS OF VALVES |
| 16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| PREN 13789 : DRAFT 2009 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| PREN 13709 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| BS EN 15714-3:2009 | Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements |
| PREN 1984 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| 11/30249105 DC : 0 | BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| 11/30249111 DC : 0 | BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 01/122757 DC : DRAFT JULY 2001 | ISO/DIS 16138 - INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS |
| PREN 12760 : DRAFT 2015 | INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
| S.R. CEN TR 13932:2009 | ROTODYNAMIC PUMPS - RECOMMENDATIONS FOR FITTING OF INLET AND OUTLET ON PIPING |
| I.S. EN 15714-1:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 1: TERMINOLOGY AND DEFINITIONS |
| CEN/TR 13932:2009 | Rotodynamic pumps - Recommendations for fitting of inlet and outlet on piping |
| I.S. EN 12516-1:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| ISO 16486-4:2016 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 4: Valves |
| DIN EN 12516-4:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| UNI EN 1555-4 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| ONORM EN ISO 16136 : 2008 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| ONORM EN ISO 16137 : 2008 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 12288:2010-10 | Industrial valves - Copper alloy gate valves |
| DIN EN 1626:2009-01 | CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
| DIN EN 1171:2015-11 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| DIN EN 12760:2016-07 | INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
| DIN EN 1984:2010-10 | Industrial valves - Steel gate valves |
| DIN EN 14384:2005-10 | PILLAR FIRE HYDRANTS |
| DIN EN 14339:2005-10 | UNDERGROUND FIRE HYDRANTS |
| BS EN 12266-1:2012 | Industrial valves. Testing of metallic valves Pressure tests, test procedures and acceptance criteria. Mandatory requirements |
| ISO 16136:2006 | Industrial valves Butterfly valves of thermoplastics materials |
| BS EN 12334:2001 | Industrial valves. Cast iron check valves |
| BS EN 12516-3:2002 | Valves. Shell design strength Experimental method |
| UNE-EN 14141:2014 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| UNE-EN 593:2009 | Industrial valves - Metallic butterfly valves |
| BS EN 13709:2002 | Industrial valves. Steel globe and globe stop and check valves |
| I.S. EN 1267:2012 | INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| I.S. EN 1626:2008 | CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
| I.S. EN 12201-4:2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 4: VALVES FOR WATER SUPPLY SYSTEMS |
| I.S. EN 1171:2015 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| I.S. EN 13774:2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| DIN EN 12334:2004-10 | INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
| DIN EN 12334:2001-04 | INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
| I.S. EN ISO 10497:2010 | TESTING OF VALVES - FIRE TYPE-TESTING REQUIREMENTS |
| DIN EN 736-2:2016-06 | VALVES - TERMINOLOGY - PART 2: DEFINITION OF COMPONENTS OF VALVES |
| I.S. EN 736-2:2016 | VALVES - TERMINOLOGY - PART 2: DEFINITION OF COMPONENTS OF VALVES |
| I.S. EN 12266-2:2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
| I.S. EN 1984:2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| DIN EN 1983:2013-12 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| I.S. EN 1555-4:2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
| I.S. EN 19:2016 | INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
| I.S. EN 14141:2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| I.S. EN 1983:2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| I.S. EN 12760:2016 | INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
| DIN EN 12516-3:2003-01 | VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
| I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
| I.S. EN 13789:2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| I.S. EN 13709:2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| I.S. EN 12266-1:2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
| UNI EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
| 04/30118763 DC : DRAFT AUG 2004 | PREN 12335 - INDUSTRIAL VALVES - CAST IRON PLUG VALVES |
| I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| BS ISO 9635-3:2014 | Agricultural irrigation equipment. Irrigation valves Check valves |
| 11/30243885 DC : 0 | BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| 09/30205877 DC : 0 | BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES |
| I.S. EN 12567:2000 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS |
| API 607 RUSSIAN : 2010 | PIPELINE VALVES - FIRE TEST FOR SOFT-SEATED QUARTER-TURN VALVES |
| UNI CEN/TR 13932 : 2009 | ROTODYNAMIC PUMPS - RECOMMENDATIONS FOR FITTING OF INLET AND OUTLET ON PIPING |
| PREN 12516-4 : DRAFT 2011 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 00/714962 DC : DRAFT OCT 2000 | PREN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOF STEEL VALVE SHELLS |
| 13/30278124 DC : 0 | BS ISO 4437-4 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
| 04/30124417 DC : DRAFT OCT 2004 | EN 15081 - INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT |
| 09/30205883 DC : 0 | BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| 09/30205880 DC : DRAFT OCT 2009 | BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| 16/30345749 DC : 0 | BS EN 12516-1:2014/A1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| 15/30327617 DC : 0 | BS EN 12760 - INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
| PD CEN/TR 13932:2009 | Rotodynamic pumps. Recommendations for fitting of inlet and outlet on piping |
| 01/122755 DC : DRAFT JULY 2001 | ISO/DIS 21787 - INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTIC MATERIALS |
| 01/709785 DC : DRAFT JUN 2001 | PREN ISO 16136 - INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTIC MATERIALS |
| ISO 9635-3:2014 | Agricultural irrigation equipment Irrigation valves Part 3: Check valves |
| UNI EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| UNI EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| ISO 4437-4:2015 | Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves |
| UNI EN 13547 : 2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. CEN TS 13547:2006 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. EN 12627:2017 | INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| EN 12760:2016 | Industrial valves - Socket welding ends for steel valves |
| EN 19:2016 | Industrial valves - Marking of metallic valves |
| EN 12627:2017 | Industrial valves - Butt welding ends for steel valves |
| ONORM EN ISO 16138 : 2008 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 1555-4:2011-07 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| DIN EN 14141:2013-08 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| DIN EN ISO 16135:2006-06 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| UNE-EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| BS EN ISO 16138:2006 | Industrial valves. Diaphragm valves of thermoplastics materials |
| UNE-EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| BS EN 12567:2000 | Industrial valves. Isolating valves for LNG. Specification for suitability and appropriate verification tests |
| BS EN 1626:2008 | Cryogenic vessels. Valves for cryogenic service |
| BS EN 12570:2000 | Industrial valves. Method for sizing the operating element |
| ISO 16135:2006 | Industrial valves Ball valves of thermoplastics materials |
| I.S. EN 12569:2000 | INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS |
| UNI EN 12570 : 2001 | INDUSTRIAL VALVES - METHOD FOR SIZING THE OPERATING ELEMENT |
| UNI EN 12288 : 2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| UNI EN 1983 : 2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| UNI EN 1267 : 2012 | INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| UNI EN 13774 : 2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| EN ISO 21787:2006 | Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
| UNI EN 13789 : 2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| EN ISO 10497:2010 | Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
| UNI EN 14141 : 2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| UNI EN 1626 : 2009 | CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
| UNI EN 14384 : 2006 | PILLAR FIRE HYDRANTS |
| UNI EN ISO 10497 : 2010 | TESTING OF VALVES - FIRE TYPE-TESTING REQUIREMENTS |
| UNI EN 12201-4 : 2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 4: VALVES FOR WATER SUPPLY SYSTEMS |
| UNI EN 1984 : 2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| UNI EN 12266-1 : 2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
| BS EN 1171:2015 | Industrial valves. Cast iron gate valves |
| UNI EN 13709 : 2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| UNI EN 12266-2 : 2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
| DIN EN 13547:2013-12 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 14/30301146 DC : 0 | BS EN 19 - INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
| ISO 9635-2:2014 | Agricultural irrigation equipment Irrigation valves Part 2: Isolating valves |
| 07/30166912 DC : DRAFT AUG 2007 | BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 14/30282872 DC : 0 | BS EN 1171 - INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| 08/30187521 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
| PREN 12627 : DRAFT 2016 | INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
| 13/30271604 DC : 0 | BS ISO 9635-2 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 2: ISOLATING VALVES |
| 05/30141776 DC : 0 | EN 15389 - INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS |
| BS EN 13547:2013 | Industrial valves. Copper alloy ball valves |
| EN 12516-4:2014 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| BS ISO 4437-4:2015 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Valves |
| 05/30132532 DC : DRAFT APR 2005 | EN 12982 - INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
| 13/30282119 DC : 0 | BS ISO 9635-3 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 3: CHECK VALVES |
| PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| 09/30202714 DC : 0 | BS EN 12266-1 - INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
| 09/30202717 DC : 0 | BS EN 12266-2 - INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
| BS EN 16722:2015 | Industrial valves. End-to-end and centre-to-end dimensions for valves with threaded ends |
| BS EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
| UNI EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| UNE-EN 12516-4:2016 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| PREN 12288 : DRAFT 2009 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| BS EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| UNE-EN 12516-1:2016 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| BS EN 12627:2017 | Industrial valves. Butt welding ends for steel valves |
| DIN EN 1267:2012-04 | Industrial valves - Test of flow resistance using water as test fluid |
| ONORM EN ISO 16135 : 2008 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| UNE-EN 12627:1999 | Industrial valves - Butt welding ends for steel valves |
| DIN EN ISO 16138:2006-06 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13789:2010-09 | Industrial valves - Cast iron globe valves |
| DIN EN ISO 16136:2006-06 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16137:2006-06 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16139:2006-06 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13774:2013-05 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| BS EN 13789:2002 | Industrial valves. Cast iron globe valves |
| BS EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements |
| ISO 21787:2006 | Industrial valves Globe valves of thermoplastics materials |
| BS EN 14341:2006 | Industrial valves. Steel check valves |
| UNE-EN 12201-4:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
| EN 16767:2016 | Industrial valves - Steel and cast iron check valves |
| BS EN ISO 16137:2006 | Industrial valves. Check valves of thermoplastic materials |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| BS EN ISO 21787:2006 | Industrial valves. Globe valves of thermoplastics materials |
| BS EN 13397:2002 | Industrial valves. Diaphragm valves made of metallic materials |
| UNE-EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| UNE-EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| BS EN 12569:1999 | Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests |
| ISO 16137:2006 | Industrial valves Check valves of thermoplastics materials |
| UNE-EN ISO 10497:2010 | Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
| BS EN ISO 16136:2006 | Industrial valves. Butterfly valves of thermoplastic materials |
| UNE-EN 12760:2017 | Industrial valves - Socket welding ends for steel valves |
| UNE-EN 12266-2:2013 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| ISO 16139:2006 | Industrial valves Gate valves of thermoplastics materials |
| BS EN 1074-2:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Isolating valves |
| BS EN 1983:2013 | Industrial valves. Steel ball valves |
| UNE-EN 19:2016 | Industrial valves - Marking of metallic valves |
| BS EN 12266-2:2012 | Industrial valves. Testing of metallic valves Tests, test procedures and acceptance criteria. Supplementary requirements |
| BS EN 19:2016 | Industrial valves. Marking of metallic valves |
| DIN EN ISO 21787:2006-06 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| EN ISO 16139:2006 | Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
| EN 15081:2007 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| EN ISO 16135:2006 | Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
| EN 1626:2008 | Cryogenic vessels - Valves for cryogenic service |
| EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves |
| EN ISO 16136:2006 | Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
| EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| EN 1983:2013 | Industrial valves - Steel ball valves |
| EN 14384:2005 | Pillar fire hydrants |
| EN 14339:2005 | Underground fire hydrants |
| EN 14141:2013 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| EN 1984:2010 | Industrial valves - Steel gate valves |
| EN 13789:2010 | Industrial valves - Cast iron globe valves |
| EN ISO 16138:2006 | Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
| EN 15714-1:2009 | Industrial valves - Actuators - Part 1: Terminology and definitions |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN 16722:2015 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| EN ISO 16137:2006 | Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
| EN 14341:2006 | Industrial valves - Steel check valves |
| 09/30205886 DC : 0 | BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| I.S. EN 14341:2006 | INDUSTRIAL VALVES - STEEL CHECK VALVES |
| UNE-EN 15714-3:2010 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| UNE-EN 15714-1:2010 | Industrial valves - Actuators - Part 1: Terminology and definitions |
| 11/30248438 DC : 0 | BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| 01/709784 DC : DRAFT JUN 2001 | PREN ISO 16135 - INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| 01/709787 DC : DRAFT JUN 2001 | PREN ISO 16138 - INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS |
| 01/122754 DC : DRAFT JULY 2001 | ISO/DIS 16137 - INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS |
| I.S. EN 12516-4:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| DIN EN 16767:2016-08 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| BS ISO 9635-2:2014 | Agricultural irrigation equipment. Irrigation valves Isolating valves |
| 09/30202711 DC : 0 | BS EN 1267 - INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| 05/30138211 DC : DRAFT AUG 2005 | ISO 9635-2 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 2: ISOLATING VALVES |
| 04/30118758 DC : DRAFT AUG 2004 | PREN 12304 - INDUSTRIAL VALVES - STEEL PLUG VALVES |
| DIN EN 15714-1:2010-02 | Industrial valves - Actuators - Part 1: Terminology and definitions |
| EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| PREN 736-2 : DRAFT 2015 | VALVES - TERMINOLOGY - PART 2: DEFINITION OF COMPONENTS OF VALVES |
| UNI EN 15714-1 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 1: TERMINOLOGY AND DEFINITIONS |
| 16/30348709 DC : 0 | BS EN 17070 - INDUSTRIAL VALVES - MINIMUM PERFORMANCE REQUIREMENTS |
| DIN EN 12516-1:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| DIN EN 12201-4:2012-04 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
| DIN EN 19:2016-07 | Industrial valves - Marking of metallic valves |
| ONORM EN ISO 21787 : 2008 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13397:2002-03 | INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS |
| DIN EN ISO 10497:2010-06 | Testing of valves - Fire type-testing requirements (ISO 10497:2010); German version EN ISO 10497:2010 |
| BS EN ISO 10497:2010 | Testing of valves. Fire type-testing requirements |
| UNE-EN 1171:2016 | Industrial valves - Cast iron gate valves |
| BS EN 14339:2005 | Underground fire hydrants |
| UNE-EN 12266-1:2013 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| BS EN 736-2:2016 | Valves. Terminology Definition of components of valves |
| ISO 16138:2006 | Industrial valves Diaphragm valves of thermoplastics materials |
| BS EN 14384:2005 | Pillar fire hydrants |
| BS EN 12760:1999 | Valves. Socket welding ends for steel valves |
| BS EN 1267:2012 | Industrial valves. Test of flow resistance using water as test fluid |
| BS EN 15081:2007 | Industrial valves. Mounting kits for part-turn valve actuator attachment |
| EN 13397:2001 | Industrial valves - Diaphragm valves made of metallic materials |
| EN 1171:2015 | Industrial valves - Cast iron gate valves |
| DIN EN 1074-2:2004-07 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves |
| DIN EN 12266-2:2012-04 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| DIN EN 16722:2015-12 | INDUSTRIAL VALVES - ENDTOEND AND CENTRETOEND DIMENSIONS FOR VALVES WITH THREADED ENDS |
| EN 12567:2000 | Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
| DIN EN 12266-1:2012-06 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| DIN EN 15081:2008-03 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| EN 60534-1:2005 | Industrial-process control valves - Part 1: Control valve terminology and general considerations |
| EN 764-1:2015+A1:2016 | Pressure equipment - Part 1: Vocabulary |
| EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
| IEC 60534-1:2005 | Industrial-process control valves - Part 1: Control valve terminology and general considerations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.