EN 62321-5:2014
Current
The latest, up-to-date edition.
Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
04-25-2014
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Reagents
5 Apparatus
6 Sampling
7 Procedure
8 Calibration
9 Calculation
10 Precision
11 Quality control
Annex A (informative) - Practical application of
determination of Cd , Pb and
Cr in polymers and electronics
and Cd and Pb in metals by AAS,
AFS, ICP-OES and ICP-MS
Annex B (informative) Results of international
interlaboratory study nos.
2 (IIS2) and 4A (IIS 4A)
Bibliography
Annex ZA (normative) - Normative references to
international Publications with their
corresponding European publications
IEC 62321-5:2013 describes the four test methods for lead, cadmium and chromium in polymers, metals and electronics, namely AAS (atomic absorption spectrometry), AFS (atomic fluorescence spectrometry), ICP-OES (inductively coupled plasma optical emission spectrometry), and ICP-MS (inductively coupled plasma mass spectrometry) as well as several procedures for preparing the sample solution from which the most appropriate method of analysis can be selected by experts.
| Committee |
CLC/TC 111X
|
| DevelopmentNote |
Partially supersedes EN 62321. (04/2014)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IEC 62321-5:2013 | Identical |
| NF EN 62321-5 : 2014 | Identical |
| NBN EN 62321-5 : 2014 | Identical |
| NEN EN IEC 62321-5 : 2014 | Identical |
| I.S. EN 62321-5:2014 | Identical |
| PN EN 62321-5 : 2014 | Identical |
| DIN EN 62321-5 : 2014 | Identical |
| VDE 0042-1-5 : 2014 | Identical |
| UNE-EN 62321-5:2014 | Identical |
| SN EN 62321-5:2014 | Identical |
| BS EN 62321-5:2014 | Identical |
| CEI EN 62321-5 : 2016 | Identical |
| PNE-FprEN 62321-5 | Identical |
| PD CLC/TS 50625-3-1:2015 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. General |
| BS EN 62321-2:2014 | Determination of certain substances in electrotechnical products Disassembly, disjointment and mechanical sample preparation |
| S.R. CLC/TS 50625-3-1:2015 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-1: SPECIFICATION FOR DE-POLLUTION - GENERAL |
| CLC/TS 50625-3-1:2015 | Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification for de-pollution - General |
| I.S. EN 62321-2:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 2: DISASSEMBLY, DISJOINTMENT AND MECHANICAL SAMPLE PREPARATION |
| EN 62321-2:2014 | Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation |
| EN 62321-1:2013 | Determination of certain substances in electrotechnical products - Part 1: Introduction and overview |
| ASTM E 1834 : 2011 | Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
| EN ISO 5961:1995 | Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994) |
| ISO 5961:1994 | Water quality Determination of cadmium by atomic absorption spectrometry |
| ASTM E 362 : 1999 | Standard Test Methods for the Determination of Arsenic and Lead in Silicomanganese and Ferrosilicon Manganese (Withdrawn 2005) |
| EN 62321-3-1:2014 | Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry |
| EN 10181:1989 | Chemical analysis of ferrous materials - Determination of lead in steels - Flame atomic absorption spectrometric method |
| ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
| ASTM E 363 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium |
| ASTM C 146 : 1994 : REV A : R2004 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| EN 13346:2000 | Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods |
| ASTM E 536 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ASTM C 169 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| EN 12441-3:2001 | Zinc and zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper - Flame atomic absorption spectrometric method |
| EN 1122:2001 | Plastics - Determination of cadmium - Wet decomposition method |
| ASTM E 361 : 1999 | Standard Test Methods for the Determination of Arsenic and Lead in Ferromanganese (Withdrawn 2005) |
| EN 62321-2:2014 | Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.