EN 62321:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
02-07-2022
EN 62321-2:2014
EN 62321-6:2015
EN 62321-3-2:2014
EN 62321-5:2014
EN 62321-4:2014
EN 62321-1:2013
EN 62321-3-1:2014
EN 62321-7-1:2015
EN 62321-7-2:2017
04-03-2009
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Test methods - Overview
5 Mechanical sample preparation
6 Screening by X-ray fluorescence spectrometry (XRF)
7 Determination of mercury in polymers, metals and
electronics by CV-AAS, CVAFS, ICP-OES and
ICP-MS
8 Determination of lead and cadmium in polymers by
ICP-OES, ICP-MS and AAS
9 Determination of lead and cadmium in metals by
ICP-OES, ICP-MS and AAS
10 Determination of lead and cadmium in electronics
by ICP-OES, ICP-MS and AAS
Annex A (informative) - Determination of PBB and
PBDE in polymers by GC-MS
Annex B (informative) - Test for the presence of hexavalent
chromium (Cr(6)) in colourless and coloured
corrosion-protected coatings on metals
Annex C (Informative) - Determination of hexavalent
chromium (Cr(6)) in polymers and electronics
by the colorimetric method
Annex D (informative) - Practical application of screening
by X-ray fluorescence spectrometry (XRF)
Annex E (informative) - Practical application of
determination of mercury in polymers, metals
and electronics by CV-AAS, CV-AFS, ICP-OES
and ICP-MS
Annex F (informative) - Practical application of
determination of lead and cadmium in polymers
by ICP-OES, ICP-MS and AAS
Annex G (informative) - Practical application of
determination of lead and cadmium in metals by
ICP-OES, ICP-MS and AAS
Annex H (informative) - Practical application of
determination of lead and cadmium in electronics
by ICP-OES, ICP-MS and AAS
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 62321:2008, which is an International Standard, specifies the determination of the levels of lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (Cr(VI)) contained in inorganic and organic compounds, and two types of brominated flame retardants, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) contained in electrotechnical products. This standard refers to the sample as the object to be processed and measured. The nature of the sample and the manner in which it is acquired is defined by the entity carrying out the tests and not by this standard. It has the status of a horizontal standard in accordance with IEC Guide 108.
Committee |
CLC/TC 111X
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NF EN 62321 : 2009 | Identical |
IEC 62321:2008 | Identical |
NBN EN 62321 : 2009 | Identical |
NEN EN IEC 62321 : 2009 | Identical |
I.S. EN 62321:2009 | Identical |
PN EN 62321 : 2009 | Identical |
VDE 0042-1 : 2009 | Identical |
DIN EN 62321 : 2009 | Identical |
UNE-EN 62321:2009 | Identical |
BS EN 62321:2009 | Identical |
CEI EN 62321 : 2009 | Identical |
PNE-prEN 62321 | Identical |
BS EN 60705:2012+A1:2014 | Identical |
BS EN 61427-1:2013 | Identical |
PD CEN/TR 16741:2015 | Textiles and textile products. Guidance on health and environmental issues related to chemical content of textile products intended for clothing, interior textiles and upholstery |
BS EN 50581:2012 | Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances |
EN 62333-3:2010 | Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet |
BS EN 62333-3:2010 | Noise suppression sheet for digital devices and equipment Characterization of parameters of noise suppression sheet |
BS EN 62321-6:2015 | Determination of certain substances in electrotechnical products Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS) |
BS EN 62554 : 2011 | SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS |
I.S. EN 62321-6:2015 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 6: POLYBROMINATED BIPHENYLS AND POLYBROMINATED DIPHENYL ETHERS IN POLYMERS BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
I.S. EN 12977-5:2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
CEI EN 50581 : 2013 | TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
CEI EN 62554 : 2012 | SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS |
I.S. EN 62554:2011 | SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS |
PD CEN/TR 10364:2016 | Steels and cast irons. Determination of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenylethers (PBDE) with regard to directives 2011/65/EU (RoHS) and 2000/53/EC (ELV). Limitations |
EN 12977-5:2018 | Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment |
S.R. CEN/TR 16741:2015 | TEXTILES AND TEXTILE PRODUCTS - GUIDANCE ON HEALTH AND ENVIRONMENTAL ISSUES RELATED TO CHEMICAL CONTENT OF TEXTILE PRODUCTS INTENDED FOR CLOTHING, INTERIOR TEXTILES AND UPHOLSTERY |
I.S. EN 50581:2012 | TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
EN 62321-6:2015 | Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS) |
EN 50581:2012 | Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances |
CEN/TR 16741:2015 | Textiles and textile products - Guidance on health and environmental issues related to chemical content of textile products intended for clothing, interior textiles and upholstery |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
EN 15205:2006 | Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis |
EN ISO 5961:1995 | Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994) |
ISO 5961:1994 | Water quality Determination of cadmium by atomic absorption spectrometry |
IEC TS 62239:2008 | Process management for avionics - Preparation of an electronic components management plan |
ISO 6101-2:1997 | Rubber Determination of metal content by atomic absorption spectrometry Part 2: Determination of lead content |
ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
ASTM E 1622 : 1994 : R1999 : EDT 1 | Standard Practice for Correction of Spectral Line Overlap in Wavelength-Dispersive X-Ray Spectrometry (Withdrawn 2006) |
ISO 17294-1:2004 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines |
ASTM E 1172 : 2016 : REDLINE | Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer |
ISO Guide 30:2015 | Reference materials — Selected terms and definitions |
EN 13346:2000 | Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods |
ASTM E 1621 : 2013 : REDLINE | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
ISO 3856-4:1984 | Paints and varnishes — Determination of "soluble" metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method |
EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
ISO 247:2006 | Rubber Determination of ash |
EN 1122:2001 | Plastics - Determination of cadmium - Wet decomposition method |
ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
IEC GUIDE 114:2005 | Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products |
DIN 50993-1:2005-05 | DETERMINATION OF HEXAVALENT CHROMIUM IN CORROSION PROTECTION COATINGS - PART 1: QUALITATIVE ANALYSIS |
IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.