EN 62321-1:2013
Current
Current
The latest, up-to-date edition.
Determination of certain substances in electrotechnical products - Part 1: Introduction and overview
Published date
07-26-2013
Sorry this product is not available in your region.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Test methods - Overview
Annex A (informative) - Limit of detection (LOD) or method
detection limit (MDL) - Example of calculation
Bibliography
Annex ZA (normative) - Normative references to
international publications with
their corresponding European publications
IEC 62321-1:2013 refers to the sample as the object to be processed and measured. The nature of the sample and the manner in which it is acquired is defined by the entity carrying out the tests and not by this standard. It provides guidance on the disassembly procedure employed for obtaining a sample. This first edition of IEC 62321-1 is a partial replacement of IEC 62321, forming a structural revision and replacing Clauses 1 to 4.
| Committee |
CLC/TC 111X
|
| DevelopmentNote |
Partially supersedes EN 62321. (07/2013)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 62321-1 : 2014 | Identical |
| NBN EN 62321-1 : 2013 | Identical |
| NEN EN IEC 62321-1 : 2013 | Identical |
| I.S. EN 62321-1:2013 | Identical |
| PN EN 62321-1 : 2014 | Identical |
| VDE 0042-1-1 : 2014 | Identical |
| DIN EN 62321-1 : 2014 | Identical |
| UNE-EN 62321-1:2013 | Identical |
| SN EN 62321-1:2013 | Identical |
| BS EN 62321-1:2013 | Identical |
| CEI EN 62321-1 : 2014 | Identical |
| IEC 62321-1:2013 | Identical |
| PNE-FprEN 62321-1 | Identical |
| CEN/TR 10364:2016 | Steels and cast irons - Determination of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenylethers (PBDE) with regard to directives 2011/65/EU (RoHS) and 2000/53/EC (ELV) - Limitations |
| I.S. EN 14041:2018 | RESILIENT, TEXTILE, LAMINATE AND MODULAR MULTILAYER FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| I.S. EN 62321-3-1:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-1: SCREENING - LEAD, MERCURY, CADMIUM, TOTAL CHROMIUM AND TOTAL BROMINE BY X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 62321-4:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 4: MERCURY IN POLYMERS, METALS AND ELECTRONICS BY CV-AAS, CV-AFS, ICP-OES AND ICP-MS |
| EN 62321-3-1:2014 | Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry |
| EN 62321-7-1:2015 | Determination of certain substances in electrotechnical products - Part 7-1: Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method |
| BS EN 62321-5:2014 | Determination of certain substances in electrotechnical products Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
| BS EN 62321-8:2017 | Determination of certain substances in electrotechnical products Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) |
| BS EN 62321-7-1:2015 | Determination of certain substances in electrotechnical products Determination of the presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method |
| CEI EN 62321-4 : 2016 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 4: MERCURY IN POLYMERS, METALS AND ELECTRONICS BY CV-AAS, CV-AFS, ICP-OES AND ICP-MS |
| BS EN 62321-4 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 4: MERCURY IN POLYMERS, METALS AND ELECTRONICS BY CV-AAS, CV-AFS, ICP-OES AND ICP-MS |
| CEI EN 62321-8 : 1ED 2017 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS), GAS CHROMATOGRAPHY-MASS SPECTROMETRY USING A PYROLYZER/THERMAL DESORPTION ACCESSORY (PY/TD-GC-MS) |
| I.S. EN 62321-7-2:2017 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 7-2: HEXAVALENT CHROMIUM - DETERMINATION OF HEXAVALENT CHROMIUM (CR(6)) IN POLYMERS AND ELECTRONICS BY THE COLORIMETRIC METHOD |
| BS EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography |
| BS EN 62321-6:2015 | Determination of certain substances in electrotechnical products Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS) |
| BS EN 62321-2:2014 | Determination of certain substances in electrotechnical products Disassembly, disjointment and mechanical sample preparation |
| BS EN 62321-3-1:2014 | Determination of certain substances in electrotechnical products Screening. Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry |
| EN 62321-7-2:2017 | Determination of certain substances in electrotechnical products - Part 7-2: Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method |
| I.S. EN 62321-6:2015 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 6: POLYBROMINATED BIPHENYLS AND POLYBROMINATED DIPHENYL ETHERS IN POLYMERS BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) |
| I.S. EN 62321-7-1:2015 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 7-1: DETERMINATION OF THE PRESENCE OF HEXAVALENT CHROMIUM (CR(6)) IN COLORLESS AND COLORED CORROSION-PROTECTED COATINGS ON METALS BY THE COLORIMETRIC METHOD |
| CEI EN 62321-7-2 : 1ED 2017 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 7-2: HEXAVALENT CHROMIUM - DETERMINATION OF HEXAVALENT CHROMIUM (CR(6)) IN POLYMERS AND ELECTRONICS BY THE COLORIMETRIC METHOD |
| PD CEN/TR 10364:2016 | Steels and cast irons. Determination of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenylethers (PBDE) with regard to directives 2011/65/EU (RoHS) and 2000/53/EC (ELV). Limitations |
| I.S. EN 62321-8:2017 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS), GAS CHROMATOGRAPHY-MASS SPECTROMETRY USING A PYROLYZER/THERMAL DESORPTION ACCESSORY (PY/TD-GC-MS) |
| S.R. CEN/TR 10364:2016 | STEELS AND CAST IRONS - DETERMINATION OF LEAD, CADMIUM, MERCURY, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS (PBB) AND POLYBROMINATED DIPHENYLETHERS (PBDE) WITH REGARD TO DIRECTIVES 2011/65/EU (ROHS) AND 2000/53/EC (ELV) - LIMITATIONS |
| I.S. EN 62321-3-2:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-2: SCREENING - TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY |
| PREN 14041 : DRAFT 2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| 16/30339855 DC : 0 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| I.S. EN 62321-5:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 5: CADMIUM, LEAD AND CHROMIUM IN POLYMERS AND ELECTRONICS AND CADMIUM AND LEAD IN METALS BY AAS, AFS, ICP-OES AND ICP-MS |
| I.S. EN 62321-2:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 2: DISASSEMBLY, DISJOINTMENT AND MECHANICAL SAMPLE PREPARATION |
| EN 62321-8:2017 | Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) |
| EN 62321-4:2014/A1:2017 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 4: MERCURY IN POLYMERS, METALS AND ELECTRONICS BY CV-AAS, CV-AFS, ICP-OES AND ICP-MS (IEC 62321-4:2013/A1:2017) |
| EN 62321-2:2014 | Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation |
| EN 62321-6:2015 | Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS) |
| EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography |
| EN 62321-5:2014 | Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO Guide 32:1997 | Calibration in analytical chemistry and use of certified reference materials |
| IEC TS 62239:2008 | Process management for avionics - Preparation of an electronic components management plan |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO Guide 30:2015 | Reference materials — Selected terms and definitions |
| IEC TR 62476:2010 | Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products |
| ISO 6206:1979 | Chemical products for industrial use — Sampling — Vocabulary |
| ISO 78-2:1999 | Chemistry Layouts for standards Part 2: Methods of chemical analysis |
| IEC GUIDE 114:2005 | Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.