EN 62155:2003
Current
Current
The latest, up-to-date edition.
Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
Published date
08-13-2003
Sorry this product is not available in your region.
Applicable to ceramic and glass hollow insulators intended for general use in electrical equipment and ceramic hollow insulators intended for use with a permanent gas pressure in switchgear and controlgear. These insulators are intended for indoor and outdoor use in electrical equipment, operating on alternating current with a rated voltage greater than 1 000 V and a frequency not greater than 100 Hz or for use in direct-current equipment with a rated voltage of greater than 1 500 V.
| Committee |
CLC/SR 36
|
| DevelopmentNote |
Supersedes HD 329 and EN 62164 (09/2003)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 62155 : 2003 | Identical |
| PN EN 62155 : 2005 | Identical |
| BS EN 62155:2003 | Identical |
| NF EN 62155 : 2003 | Identical |
| NBN EN 62155 : 2003 | Identical |
| IEC 62155:2003 | Identical |
| NEN EN IEC 62155 : 2003 | Identical |
| UNE-EN 62155:2006 | Identical |
| CEI EN 62155 : 2004 | Identical |
| I.S. EN 62155:2003 | Identical |
| VDE 0705-1255 : 2015 | Identical |
| DIN EN 62155 : 2004 | Identical |
| VDE 0674-200 : 2004 | Identical |
| OVE/ONORM EN 62155 : 2004 | Identical |
| BS EN 60679-3:2013 | Identical |
| UNE-EN 62271-205:2011 | High-voltage switchgear and controlgear -- Part 205: Compact switchgear assemblies for operation at rated voltages above 52 kV |
| CEI EN 61462 : 2008 | COMPOSITE HOLLOW INSULATORS - PRESSURIZED AND UNPRESSURIZED INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS, ACCEPTANCE CRITERIA AND DESIGN RECOMMENDATIONS |
| BS EN 50180-1:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers General requirements for bushings |
| BS EN 61869-1:2009 | Instrument transformers General requirements |
| BS EN 50386 : 2010 | BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS |
| BS EN 50180:1999 | Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers |
| PREN 50386 : DRAFT 2010 | BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS |
| I.S. EN 60137:2017 | INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| CEI EN 62199 : 2005 | BUSHINGS FOR D.C. APPLICATION |
| EN 60137:2017 | Insulated bushings for alternating voltages above 1 000 V |
| EN 62271-205:2008/corrigendum:2008 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 205: COMPACT SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV |
| EN 62199:2004 | Bushings for d.c. application |
| EN 60044-5:2004 | Instrument transformers - Part 5: Capacitor voltage transformers |
| BS EN 60044-5:2004 | Instrument transformers Capacitor voltage transformers |
| BS EN 61462:2007 | Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V. Definitions, test methods, acceptance criteria and design recommendations |
| EN IEC/IEEE 65700 : 2018 | BUSHINGS FOR DC APPLICATION (IEC/IEEE 65700-19-03:2014) |
| I.S. EN 61462:2007 | COMPOSITE HOLLOW INSULATORS - PRESSURIZED AND UNPRESSURIZED INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGE GREATER THAN 1 000 V - DEFINITIONS, TEST METHODS, ACCEPTANCE CRITERIA AND DESIGN RECOMMENDATIONS |
| 15/30289940 DC : 0 | BS EN 50180-1 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 1: GENERAL REQUIREMENTS FOR BUSHINGS |
| BS EN 62199:2004 | Bushings for D.C. application |
| BS EN 62146-1 : 2014 | GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL (IEC 62146-1:2013) |
| BS EN 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
| I.S. EN 50180:2010 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS |
| BS EN 62772:2016 | Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria |
| UNE-EN 60137:2011 | Insulated bushings for alternating voltages above 1 000 V |
| I.S. EN IEC/IEEE 65700:2018 | BUSHINGS FOR DC APPLICATION |
| I.S. EN 61869-1:2009 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62199:2004 | BUSHINGS FOR D.C. APPLICATION |
| I.S. EN 62271-205:2008 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 205: COMPACT SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV |
| UNE-EN 61869-1:2010 | Instrument transformers -- Part 1: General requirements |
| EN 50180:2010 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers – Part 1: General requirements for bushings |
| UNE-EN 50180-1:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements for bushings |
| 10/30216488 DC : 0 | BS EN 50386 - BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS |
| 09/30214442 DC : 0 | BS EN 50180 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS |
| BS EN 62271-205:2008 | High-voltage switchgear and controlgear Compact switchgear assemblies for rated voltages above 52 kV |
| I.S. EN 60044-5:2004 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
| PREN 50180 : DRAFT 2009 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS |
| CEI EN 62271-205 : 2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 205: COMPACT SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV |
| I.S. EN 50386:2010 | BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS |
| EN 61462:2007 | Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations |
| I.S. EN 62146-1:2014 | GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL |
| I.S. EN 50180-1:2015 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 1: GENERAL REQUIREMENTS FOR BUSHINGS |
| CEI EN 61869-1 : 2010 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| CEI EN 60137 : 2009 | INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| EN 50386:2010/A1:2013 | BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS |
| EN 50180-1:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements for bushings |
| EN 62146-1:2014/A1:2016 | GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL (IEC 62146-1:2013/A1:2016) |
| IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV | High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
| IEC 60050-471:2007 | International Electrotechnical Vocabulary (IEV) - Part 471: Insulators |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| IEC 60672-3:1997 | Ceramic and glass-insulating materials - Part 3: Specifications for individual materials |
| EN 61166:1993 | High-voltage alternating current circuit-breakers - Guide for seismic qualification of high-voltage alternating current circuit-breakers |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| EN ISO 2064:2000 | Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 60672-3:1997 | Ceramic and glass-insulating materials - Part 3: Specifications for individual materials |
| IEC 61166:1993 | High-voltage alternating current circuit-breakers - Guide for seismic qualification of high-voltage alternating current circuit-breakers |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
| IEC 60865-1:2011 | Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods |
| EN ISO 1460:1994 | Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992) |
| IEC TR 60865-2:2015 | Short-circuit currents - Calculation of effects - Part 2: Examples of calculation |
| IEC 60437:1997 | Radio interference test on high-voltage insulators |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| IEC TS 61245:2015 | Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems |
| IEC 61462:2007 | Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations |
| IEC 60273:1990 | Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V |
| EN 60865-1:2012 | Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO 9003:1994 | Quality systems Model for quality assurance in final inspection and test |
| ISO 1460:1992 | Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area |
| IEC 60507:2013 | Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| IEC TS 61463:2016 | Bushings - Seismic qualification |
| IEC 60672-1:1995 | Ceramic and glass insulating materials - Part 1: Definitions and classification |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.