EN 61851-23:2014/AC:2016-06
Current
The latest, up-to-date edition.
ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION (IEC 61851-23:2014/COR1:2016)
06-03-2016
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Rating of the supply a.c. voltage
6 General system requirement and
interface
7 Protection against electric shock
8 Connection between the power
supply and the EV
9 Specific requirements for vehicle coupler
10 Charging cable assembly requirements
11 EVSE requirements
101 Specific requirements for d.c. EV
charging station
102 Communication between EV and d.c.
EV charging station
Annex AA (normative) - DC EV charging
station of system A
Annex BB (normative) - DC EV charging
station of system B
Annex CC (normative) - DC EV charging
station of system C (Combined
charging system)
Annex DD (informative) - Typical d.c.
charging systems
Annex EE (informative) - Typical
configuration of d.c. charging
system
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Provides the requirements for d.c. electric vehicle (EV) charging stations, herein also referred to as 'DC charger', for conductive connection to the vehicle, with an a.c. or d.c. input voltage up to 1000 V a.c. and up to 1500 V d.c. according to IEC 60038.
| Committee |
TC 69X
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 61851-23:2015 | Identical |
| DIN EN 61851-23 : 2014 COR 1 2016 | Identical |
| I.S. EN 61851-23:2014 | Identical |
| PN EN 61851-23 : 2014 AC 2016 | Identical |
| NF EN 61851-23 : 2014 | Identical |
| CEI EN 61851-23 : 2015 | Identical |
| VDE 0122-2-3 : 2014 COR 1 2016 | Identical |
| BS EN 61851-23:2014 | Identical |
| NBN EN 61851-23 : 2014 COR 2016 | Identical |
| NEN EN IEC 61851-23 : 2014 C1 2016 | Identical |
| IEC 61851-23:2014/COR1:2016 | Identical |
| BS EN 61851-24:2014 | Electric vehicle conductive charging system Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging |
| BS EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles General requirements |
| UNE-EN 62196-1:2015 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| VDI 2166 Blatt 2:2015-10 | Planning of electrical installations in buildings - Advice for electric mobility |
| UNE-EN 61851-24:2015 | Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging |
| EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| I.S. EN 61851-24:2014 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 24: DIGITAL COMMUNICATION BETWEEN A D.C. EV CHARGING STATION AND AN ELECTRIC VEHICLE FOR CONTROL OF D.C. CHARGING |
| I.S. EN 62196-1:2014 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| EN 61851-24:2014/AC:2015 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 24: DIGITAL COMMUNICATION BETWEEN A D.C. EV CHARGING STATION AND AN ELECTRIC VEHICLE FOR CONTROL OF D.C. CHARGING (IEC 61851-24:2014) |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| IEC TS 60479-1:2005+AMD1:2016 CSV | Effects of current on human beings and livestock - Part 1: Generalaspects |
| IEC 62053-21:2003+AMD1:2016 CSV | Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) |
| IEC 62196-3:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers |
| EN 62196-3:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers |
| EN 61558-1:2005/A1:2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| HD 60364-5-54:2011/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
| IEC 62052-11:2003+AMD1:2016 CSV | Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment |
| IEC 60364-7-722:2015 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
| SAE J2836/2_201109 | Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| ISO 11898-1:2015 | Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling |
| SAE J2847/2_201504 | Communication Between Plug-In Vehicles and Off-Board DC Chargers |
| EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| DIN SPEC 70121:2014-12 | Electromobility - Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging in the Combined Charging System; Text in English |
| EN 61851-24:2014/AC:2015 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 24: DIGITAL COMMUNICATION BETWEEN A D.C. EV CHARGING STATION AND AN ELECTRIC VEHICLE FOR CONTROL OF D.C. CHARGING (IEC 61851-24:2014) |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| EN 61557-8:2015/AC:2016-06 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems |
| IEC 61557-8:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems |
| ISO 15118-2:2014 | Road vehicles Vehicle-to-Grid Communication Interface Part 2: Network and application protocol requirements |
| IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
| SAE J2931/1_201412 | Digital Communications for Plug-in Electric Vehicles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.