EN 61558-2-16:2009/A1:2013
Current
Current
The latest, up-to-date edition.
SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1 100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS (IEC 61558-2-16:2009/A1:2013)
Amendment of
Published date
11-29-2013
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General notes on tests
6 Ratings
7 Classification
8 Marking and other information
9 Protection against electric shock
10 Change of input voltage setting
11 Output voltage and output current under load
12 No-load output voltage
13 Short circuit voltage
14 Heating
15 Short-circuit and overload protection
16 Mechanical strength
17 Protection against harmful ingress of dust, solid objects
and moisture
18 Insulation resistance, dielectric strength and leakage
current
19 Construction
20 Components
21 Internal wiring
22 Supply connection and other external flexible cables or
cords
23 Terminals for external conductors
24 Provisions for protective earthing
25 Screws and connections
26 Creepage distances, clearances and distances through
insulation
27 Resistance to heat, fire and tracking
28 Resistance to rusting
Annexes
Annex K (normative) - Insulated winding wires
Annex AA (informative) - Partial discharge (PD) test
Annex BB (normative) - Particular requirements for associated
transformers for use in switch mode power supplies
with internal frequencies > 500 Hz
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Describes the safety of switch mode power supply units and transformers for switch mode power supply units.
| Committee |
SR 96
|
| DevelopmentNote |
Supersedes EN 61558-2-17. To be read in conjunction with EN 61558-1. (01/2010)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 61558-2-16:2009 | Identical |
| CEI EN 61558-2-16/A1 : 2014 | Identical |
| PN EN 61558-2-16 : 2010 AMD 1 2014 | Identical |
| BS EN 61558-2-16 : 2009 | Identical |
| NF EN 61558-2-16 : 2010 AMD 1 2014 | Identical |
| DIN EN 61558-2-16 : 2014 | Identical |
| IEC 61558-2-16:2009/AMD1:2013 | Identical |
| NEN EN IEC 61558-2-16 : 2010 AMD 1 2013 | Identical |
| UNE-EN 61558-2-16:2010 | Identical |
| SN EN 61558-2-16:2009+A1:2013 | Identical |
| VDE 0570-2-16 : 2014 | Identical |
| NBN EN 61558-2-16 : 2010 AMD 1 2014 | Identical |
| IEC 61558-2-16:2009+AMD1:2013 CSV | Identical |
| BS EN 61558-2-16:2009+A1:2013 | Identical |
| CEI EN 61558-2-26 : 2014 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-26: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR SAVING ENERGY AND OTHER PURPOSES |
| DIN EN 16716:2015-08 (Draft) | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS EN 61558-2-13:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
| BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 61347-2-2:2012 | LAMP CONTROLGEAR - PART 2-2: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS (IEC 61347-2-2:2011 (EQV)) |
| CEI EN 61347-2-2 : 2012 | LAMP CONTROLGEAR - PART 2-2: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC STEPDOWN CONVERTORS FOR FILAMENT LAMPS |
| BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
| I.S. EN 61347-1:2015 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| UNE-EN 61558-2-8:2011 | Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNI EN 16232 : 2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| BS EN 61347-1:2015 | Lamp controlgear General and safety requirements |
| BS EN 62477-1 : 2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012) |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 61347-2-13:2014/A1:2017 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
| EN 61558-2-8:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes |
| EN 61558-2-26:2013 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
| EN 61558-2-13:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
| EN 61347-2-2:2012 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| EN 61558-2-12:2011 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
| EN 61347-2-7:2012 | Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| EN 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 16232:2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| 15/30324466 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 61558-2-23:2001 | Safety of power transformers, power supply units and similar Particular requirements for transformers for construction sites |
| BS EN 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
| BS EN 16716:2017 | Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods |
| UNE-EN 61558-2-26:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
| BS EN 61347-2-7:2012 | Lamp controlgear Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| UNE-EN 16716:2017 | Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods |
| DIN EN 16232:2013-12 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| CEI EN 61558-2-10 : 2014 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-10: PARTICULAR REQUIREMENTS AND TESTS FOR SEPARATING TRANSFORMERS WITH HIGH INSULATION LEVEL AND SEPARATING TRANSFORMERS WITH OUTPUT VOLTAGES EXCEEDING 1000 V |
| BS EN 61558-2-12:2011 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
| CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS EN 62115 : 2005 | ELECTRIC TOYS - SAFETY |
| BS EN 61347-2-2:2012 | Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| EN 16232:2013 | Child use and care articles - Infant swings |
| I.S. EN 62115:2006 | ELECTRIC TOYS - SAFETY(IEC 62115:2003 (MOD) + A1:2004 (EQV)) |
| UNE-EN 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
| UNE-EN 61347-1:2016 | Lamp controlgear - Part 1: General and safety requirements |
| UNE-EN 61347-2-13:2015 | Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| EN 61558-2-23:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites |
| 11/30245183 DC : 0 | BS EN 62115 PRAB - ELECTRIC TOYS - SAFETY |
| UNE-EN 61558-2-5:2011 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-5: Particular requirements and tests for shaver transformers, power supply units incorporating a shaver transformer and shaver supply units |
| UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
| CEI EN 61347-1 : 2016 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| BS EN 61558-2-8:2010 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformers and power supply units for bells and chimes |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| UNE-EN 61347-2-7:2012 | Lamp controlgear -- Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| I.S. EN 60335-2-76:2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-76: PARTICULAR REQUIREMENTS FOR ELECTRIC FENCE ENERGIZERS |
| I.S. EN 61558-2-10:2014 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-10: PARTICULAR REQUIREMENTS AND TESTS FOR SEPARATING TRANSFORMERS WITH HIGH INSULATION LEVEL AND SEPARATING TRANSFORMERS WITH OUTPUT VOLTAGES EXCEEDING 1000 V |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| I.S. EN 61347-2-7:2012 | LAMP CONTROLGEAR - PART 2-7: PARTICULAR REQUIREMENTS FOR BATTERY SUPPLIED ELECTRONIC CONTROLGEAR FOR EMERGENCY LIGHTING (SELF-CONTAINED) (IEC 61347-2-7:2011 (EQV)) |
| I.S. EN 61558-2-26:2013 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-26: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR SAVING ENERGY AND OTHER PURPOSES (IEC 61558-2-26:2013 (EQV)) |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| BS EN 61347-2-13 : 2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES (IEC 61347-2-13:2014) |
| UNE-EN 62115:2006 | Electric toys - Safety (IEC 62115:2003 + A1:2004, modified) |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| EN 16716:2017 | Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods |
| BS EN 16232 : 2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| UNE-EN 61347-2-2:2012 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| CEI EN 61347-2-7 : 2012 | LAMP CONTROLGEAR - PART 2-7: PARTICULAR REQUIREMENTS FOR BATTERY SUPPLIED ELECTRONIC CONTROLGEAR FOR EMERGENCY LIGHTING (SELF-CONTAINED) |
| BS EN 61558-2-26:2013 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
| BS EN 61558-2-9:2011 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps |
| I.S. EN 16716:2017 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 60335-2-76 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-76: PARTICULAR REQUIREMENTS FOR ELECTRIC FENCE ENERGIZERS |
| I.S. EN 61347-2-13:2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| EN 62477-1:2012/A1:2017 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016) |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| DIN EN 16716:2017-05 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 60335-2-76:2005/A2:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-76: PARTICULAR REQUIREMENTS FOR ELECTRIC FENCE ENERGIZERS (IEC 60335-2-76:2002/A2:2013, MODIFIED) |
| EN 61558-2-9:2011 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps |
| EN 62115:2005/A12:2015 | ELECTRIC TOYS - SAFETY (IEC 62115:2003 + A1:2004, MODIFIED) |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| IEC 61558-2-13:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
| IEC 61558-2-1:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
| IEC 60664-4:2005 | Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
| EN 61558-2-4:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
| EN 61558-2-13:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 61558-2-4:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| EN 61558-1:2005/A1:2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| EN 60317-56:2017 | Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, class 180 |
| HD 60364-4-41:2017/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| IEC 60317-56:2017 | Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, class 180 |
| IEC 60851-5:2008+AMD1:2011 CSV | Winding wires - Test methods - Part 5: Electrical properties |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| EN 61558-2-1:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
| IEC 60851-3:2009+AMD1:2013 CSV | Winding wires - Test methods - Part 3: Mechanical properties |
| EN 60317-43:1997/A1:2010 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYIMIDE TAPE WRAPPED ROUND COPPER WIRE, CLASS 240 |
| EN 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| IEC 60317-0-7:2017 | Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN 60664-4:2006/corrigendum:2006 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 4: CONSIDERATION OF HIGH-FREQUENCY VOLTAGE STRESS |
| IEC 60317-43:1997+AMD1:2010 CSV | Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240 |
| IEC 61204-7:2016 EXV | LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN 60851-5:2008/A1:2011 | WINDING WIRES - TEST METHODS - PART 5: ELECTRICAL PROPERTIES (IEC 60851-5:2008) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.