EN 61508-4:2010
Current
Current
The latest, up-to-date edition.
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
Published date
05-28-2010
Sorry this product is not available in your region.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions and abbreviations
Bibliography
Index
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 61508-4:2010 contains the definitions and explanation of terms that are used in parts 1 to 7 of the IEC 61508 series of standards. The definitions are grouped under general headings so that related terms can be understood within the context of each other. However, it should be noted that these headings are not intended to add meaning to the definitions. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. It has been subject to a thorough review and incorporates many comments received at the various revision stages. It has the status of a basic safety publication according to IEC Guide 104. NEW! Also available: IEC Standards+ 61508:2010, containing all parts, together with a commented Redline version. Changes made in this 2nd edition are highlighted and commented by a leading world expert.
| Committee |
CLC/TC 65X
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| PN EN 61508-4 : 2010 | Identical |
| I.S. EN 61508-4:2010 | Identical |
| UNE-EN 61508-4:2011 | Identical |
| NBN EN 61508-4 : 2010 | Identical |
| NF EN 61508-4 : 2011 | Identical |
| NEN EN IEC 61508-4 : 2010 | Identical |
| IEC 61508-4:2010 | Identical |
| DIN EN 61508-4 : 2011 | Identical |
| BS EN 61508-4:2010 | Identical |
| VDE 0803-4 : 2011 | Identical |
| CEI EN 61508-4 : 2011 | Identical |
| BS EN 61158-4-4:2014 | Identical |
| BS EN 61513:2013 | Nuclear power plants. Instrumentation and control important to safety. General requirements for systems |
| BS EN 60880:2009 | Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category A functions |
| 13/30260728 DC : 0 | BS EN 50402 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
| UNE-EN 61508-5:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 5: Examples of methods for the determination of safety integrity levels |
| CEI EN 62733 : 2017 | PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS |
| 11/30251717 DC : 0 | BS EN 81-20 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| I.S. EN 61162-402:2005 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 402: MULTIPLE TALKERS AND MULTIPLE LISTENERS - SHIP SYSTEMS INTERCONNECTION - DOCUMENTATION AND TEST REQUIREMENTS |
| 09/30183366 DC : 0 | BS EN 13611:2007/A1 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - GENERAL REQUIREMENTS |
| BS EN 50156-2:2015 | Electrical equipment for furnaces and ancillary equipment Requirements for design, development and type approval of safety devices and subsystems |
| CEI EN 61508-3 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS |
| UNI EN 13237 : 2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| 05/30134150 DC : DRAFT MAY 2005 | EN 15233 - METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 11/30251720 DC : 0 | BS EN 81-50 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS |
| BS EN 50090-2-3:2005 | Home and building electronic systems (HBES) System overview. General functional safety requirements for products intended to be integrated in HBES |
| BS EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) Generic standards. Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| BS EN 50270:2015 | Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| DIN EN 50402 : 2018 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS |
| CEI EN 50495 : 2011 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| CEI EN 61069-1 : 1998 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
| I.S. EN 50402:2017 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
| I.S. EN 62733:2015 | PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 61557-15:2014 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS |
| I.S. EN 61508-7:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
| VDE 0400-70 : 2018 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS |
| CEI EN 61508-5 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS |
| I.S. EN 61165:2006 | APPLICATION OF MARKOV TECHNIQUES |
| BS EN 62733:2015 | Programmable components in electronic lamp controlgear. General and safety requirements |
| BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
| EN 62733:2015/AC:2017-09 | PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS |
| EN 13463-6:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' |
| EN 61162-402:2005 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| DIN EN 81-2:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
| EN 61784-3-1:2010 | Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 |
| EN 60300-3-4:2008 | Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements |
| EN 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
| EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
| EN 60880:2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
| EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
| BS EN 61508-1:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems General requirements |
| UNE-EN 61508-1:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 1: General requirements |
| UNE-EN 1870-13:2008 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| UNE-EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| 12/30268377 DC : 0 | BS EN 50156-2 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
| I.S. EN 13463-6:2005 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B' |
| UNE-EN 50271:2011 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
| I.S. EN 61326-3-2:2008 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
| 13/30260741 DC : 0 | BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| CEI EN 61326-3-2 : 2011 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
| BS EN 50402:2017 | Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of gas detection systems |
| PREN 81-50 : DRAFT 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS |
| BS EN 61508-6:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
| I.S. EN 50156-2:2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
| BS EN 15333-1:2008 | Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Demand apparatus |
| CEI EN 60880 : 2010 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
| PREN 50402 : DRAFT 2013 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
| I.S. EN 61508-2:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
| 04/301783 DC : DRAFT JAN 2004 | EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES |
| I.S. EN 61508-5:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY |
| CEI EN 61508-7 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
| CEI EN 61508-1 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| EN 50402:2017 | Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems |
| BS EN 61508-5:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Examples of methods for the determination of safety integrity levels |
| I.S. EN 50156-1:2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| I.S. EN 61508-3:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS |
| I.S. EN 50270:2015 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| EN 50271:2010 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
| EN 81-22:2014 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| UNI EN 81-20 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| S.R. CWA 15902-1:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS) |
| DIN EN 1870-13:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| DIN EN 15233:2007-11 | Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
| UNI EN 81-22 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| BS EN 15233:2007 | Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
| UNE-EN 61508-7:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 7: Overview of techniques and measures |
| UNE-EN 81-20:2017 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts |
| I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 13237:2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| I.S. EN 14143:2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 81-1:1999 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| DIN EN 13463-6:2005-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B' |
| I.S. EN 81-2:1999 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| VDI 4003:2007-03 | Reliability management |
| VDI/VDE 2184:2008-06 | Reliable operation and maintenance of field bus systems |
| VDI/VDE 2182 Blatt 1:2011-01 | IT-security for industrial automation - General model |
| I.S. EN 848-1:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| BS EN 61162-402:2005 | Maritime navigation and radiocommunication equipment and systems. Digital interfaces Multiple talkers and multiple listeners. Ship systems interconnections. Documentation and test requirements |
| NF EN 15333-1 : 2011 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| 10/30233212 DC : 0 | BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| PREN 50156-2 : DRAFT 2012 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
| NF EN 50495 : 2010 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| 07/30169528 DC : 0 | BS EN 15333-2 - RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| 13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS EN 61784-3-1:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 1 |
| BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
| I.S. EN 50325-5:2010 | INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 5: FUNCTIONAL SAFETY COMMUNICATION BASED ON EN 50325-4 |
| 04/30115623 DC : DRAFT JUN 2004 | EN 50402 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
| UNI EN 15333-2 : 2009 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| 04/301784 DC : DRAFT JAN 2004 | EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES |
| UNI EN 15333-1 : 2008 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| I.S. EN 61069-1:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
| BS EN 61508-3:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems Software requirements |
| I.S. EN 50495:2010 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| I.S. EN 15333-1:2008 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| CEI EN 61784-3-1 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1 |
| I.S. EN 61508-6:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3 |
| NF EN 50271 : 2010 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES |
| CEI EN 61508-2 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
| DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
| DIN EN 848-3:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| DIN EN 14143:2013-10 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| DIN EN 848-1:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| BS EN 81-22:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Electric lifts with inclined path |
| UNE-EN 81-22:2014 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| UNE-EN 848-1:2008 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
| UNE-EN 81-2:2001 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS. |
| UNE-EN 848-3:2013 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| UNI EN 1870-13 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| UNI EN 14143 : 2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| UNI EN 848-3 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| UNI EN 81-2 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| UNI EN 848-1 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| UNI EN 81-1 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 60880:2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
| BS EN 61508-2:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems Requirements for electrical/electronic/ programmable electronic safety-related systems |
| BS EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use. EMC requirements Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment |
| BS EN 15333-2:2009 | Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Free flow apparatus |
| BS EN 61508-7:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures |
| DIN EN 15333-2:2009-07 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| I.S. EN 848-3:2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| BS EN 62551:2012 | Analysis techniques for dependability. Petri net techniques |
| PREN 848-3 : DRAFT 2010 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| 07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
| 10/30216582 DC : 0 | BS EN 13611:2007/A2 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - GENERAL REQUIREMENTS |
| BS EN 61165:2006 | Application of Markov techniques |
| CEI EN 61513 : 2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS |
| I.S. EN 50090-2-3:2005 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES |
| 02/645215 DC : DRAFT OCT 2002 | EN 50090-2-3:2002 - HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES |
| 04/30086349 DC : DRAFT APR 2004 | EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| UNE-EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| BS EN 50271:2010 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies |
| I.S. EN 61508-1:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 15333-2:2009 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 50271:2010 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 81-22:2014-12 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| BS EN 848-1 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| BS EN 13463-6:2005 | Non-electrical equipment for potentially explosive atmospheres Protection by control of ignition source \'b\' |
| BS EN 81-1 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| UNE-EN 61508-6:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
| BS EN 81-2 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
| BS EN 13237:2012 | Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| BS EN 81-20:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts |
| BS EN 1870-13 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| BS EN 14143:2013 | Respiratory equipment. Self-contained re-breathing diving apparatus |
| BS EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation |
| 12/30260546 DC : 0 | BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| UNE-EN 14143:2014 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| DIN EN 81-2:2010-08 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN 14143:2013 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 81-2 : 1998 + A3 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN 15333-2:2009 | Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus |
| EN 1870-13:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| EN 15233:2007 | Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
| EN 81-1:1998+A3:2009 | Safety rules for the construction and installation of lifts - Part 1: Electric lifts |
| EN 848-3:2012 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| UNE-EN 61508-3:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 3: Software requirements |
| DIN EN 15333-1:2008-04 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| I.S. EN 1870-13:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| I.S. EN 61513:2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS (IEC 61513:2011 (EQV)) |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| I.S. EN 81-22:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| 12/30243459 DC : 0 | BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH' |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| BS EN 50325-5:2010 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces Functional safety communication based on EN 50325-4 |
| CEI EN 50325-5 : 2012 | INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 5: FUNCTIONAL SAFETY COMMUNICATION BASED ON EN 50325-4 |
| BS EN 60300-3-4:2008 | Dependability management Application guide. Guide to the specification of dependability requirements |
| CEI EN 50271 : 2011 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES |
| UNE-EN 61508-2:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
| I.S. EN 81-20:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| PREN 50270 : DRAFT 2013 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 13237:2013-01 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| BS EN 848-3:2012 | Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines |
| 10/30216944 DC : 0 | BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| BS EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
| EN 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels |
| EN 62551 : 2012 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012) |
| EN 61513:2013 | Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
| EN 50325-5:2010 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 5: Functional safety communication based on EN 50325-4 |
| EN 61069-1:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures |
| EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
| EN 50156-2:2015 | Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems |
| DIN EN 81-1:2010-06 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| DIN EN 81-1:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| DIN EN 81-20:2014-11 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| EN 50270:2015 | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
| EN 61165:2006 | Application of Markov techniques |
| EN 50090-2-3:2005 | Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES |
| EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
| UNE-EN 81-20:2020 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts |
| IEC 60050-351:2013 | International Electrotechnical Vocabulary (IEV) - Part 351: Control technology |
| EN 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
| ISO/IEC 2382-1:1993 | Information technology Vocabulary Part 1: Fundamental terms |
| EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
| EN 61800-5-2:2017 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
| EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
| IEC 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| EN 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| EN 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| EN 62061:2005/A2:2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
| EN 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| EN ISO 8402 : 1995 | QUALITY MANAGEMENT AND QUALITY ASSURANCE - VOCABULARY |
| ISO/IEC 2382-14:1997 | Information technology Vocabulary Part 14: Reliability, maintainability and availability |
| IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| IEC TR 62059-11:2002 | Electricity metering equipment - Dependability - Part 11: General concepts |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
| IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.