EN 61260:1995/A1:2001
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS
Superseded date
06-01-2014
Superseded by
EN 61260-3:2016
EN 61260-2:2016/A1:2017
EN 61260-1:2014
EN 61260-2:2016
Published date
01-12-2013
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Performance requirements
5 Test methods
6 Instrument marking
7 Instruction manual
8 Electromagnetic and electrostatic compatibility
requirements and test procedures
Annex A (informative) - Midband frequencies
Annex B (informative) - Normalized frequencies at
breakpoints of limits on minimum
and maximum relative attenuation
for one-third-octave-band filters
Annex C (informative) - Recommendations for verification
of the electrical performance
characteristics of bandpass filters
Annex D (informative) - Radio-frequency emission limits
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Describes performance requirements and methods for testing analogue, sampled-data and digital implementations of band-pass filters that comprise a filter set or spectrum analyser.
| Committee |
SR 29
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN 61260:1999 | Identical |
| NBN EN 61260 : 1996 AMD 1 2002 | Identical |
| DIN EN 61260:2003-03 | Identical |
| BS EN 61260:1996 | Identical |
| PN EN 61260 : 2000 AMD 1 2004 | Identical |
| NEN EN IEC 61260 : 1995 AMD 1 2002 | Identical |
| NEN 11260 : 1995 | Identical |
| NF EN 61260 : 96 AMD 1 2002 | Identical |
| SN EN 61260 : 1995 AMD 1 2001 | Identical |
| IEC 61260:1995 | Identical |
| UNE-EN 15461:2008 | Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements |
| I.S. EN 1454:1998 | PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY |
| 12/30258455 DC : 0 | FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| BS EN 61481-1:2014 | Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c. |
| BS EN 54-16:2008 | Fire detection and fire alarm systems Voice alarm control and indicating equipment |
| PD CEN/TS 16272-5:2014 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound reflection under direct sound field conditions |
| FD CEN/TR 15068 : 2009 FD | GAS WELDING EQUIPMENT - MEASUREMENT OF NOISE EMITTED BY BLOWPIPE FOR WELDING, CUTTING, HEATING, BRAZING AND SOLDERING - MEASUREMENT METHOD |
| 01/560801 DC : DRAFT FEB 2001 | BS EN ISO 10848-2 - ACOUSTICS - LABORATORY MEASUREMENT OF THE FLANKING TRANSMISSION OF AIRBORNE AND IMPACT NOISE BETWEEN ADJOINING ROOMS - PART 2: APPLICATION TO LIGHT ELEMENTS WHEN THE JUNCTION HAS A SMALL INFLUENCE |
| EN 61243-1:2005/A1:2010 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| 01/560340 DC : DRAFT JAN 2001 | BS EN ISO 3095 - RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES |
| BS EN 61996-1:2013 | Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR) Performance requirements, methods of testing and required test results |
| BS EN 1793-5:2016 | Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound reflection under direct sound field conditions |
| I.S. EN 61996-1:2013-2015-10 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 61996-1:2013 (EQV)) |
| BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
| I.S. EN 15461:2008 | RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
| EN 61400-11:2013 | Wind turbines - Part 11: Acoustic noise measurement techniques |
| DIN EN ISO 10052:2010-10 | Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004 + Amd 1:2010) (includes Amendment A1:2010) |
| DIN EN 13355:2010-06 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| UNE-EN ISO 3381:2011 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
| BS EN 13141-2:2010 | Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust and supply air terminal devices |
| DIN EN 15433-4:2008-02 | Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation |
| EN 61243-3:2014/AC:2015 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| EN 60704-1:2010/A11:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010) |
| EN 13141-2:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| EN 61996-2:2008 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results |
| EN 50332-2:2013 | Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design |
| EN 61481-1:2014 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements |
| EN 60118-15:2012 | Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal |
| CEI EN 61996-1 : 2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: VOYAGE DATA RECORDER (VDR) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| UNE-EN 16272-4:2017 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field |
| UNE-EN 61481-1:2015 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| 13/30281665 DC : 0 | BS EN 50332-2 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY |
| I.S. EN 60118-15:2012 | ELECTROACOUSTICS - HEARING AIDS - PART 15: METHODS FOR CHARACTERISING SIGNAL PROCESSING IN HEARING AIDS WITH A SPEECH-LIKE SIGNAL (IEC 60118-15:2012 (EQV)) |
| S.R. CEN/TS 16272-5:2014 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS |
| BS EN 61481-2:2014 | Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| PD CEN/TS 16272-7:2015 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Extrinsic characteristics. In situ values of insertion loss |
| 00/565268 DC : DRAFT NOV 2000 | BS EN ISO 10052 - ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF EQUIPMENT SOUND - SURVEY METHOD |
| CEI EN 60268-16 : 2012 | SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX |
| 08/30175518 DC : DRAFT SEP 2008 | BS EN 13141-2 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| BS EN 61606-3:2008 | Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics Professional use |
| I.S. EN 50332-1:2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 1: GENERAL METHOD FOR ONE PACKAGE EQUIPMENT |
| BS EN 61243-3:2014 | Live working. Voltage detectors Two-pole low-voltage type |
| S.R. CEN TR 15068:2009 | GAS WELDING EQUIPMENT - MEASUREMENT OF NOISE EMITTED BY BLOWPIPE FOR WELDING, CUTTING, HEATING, BRAZING AND SOLDERING - MEASUREMENT METHOD |
| I.S. TS 15694:2004 | MECHANICAL VIBRATION AND SHOCK - MEASUREMENT AND EVALUATION OF SINGLE SHOCKS TRANSMITTED FROM HAND-HELD AND HAND-GUIDED MACHINES TO THE HAND-ARM SYSTEM |
| BS EN 15461 : 2008 | RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
| BS EN 60268-5 : 2003 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
| I.S. EN ISO 10052:2005 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
| I.S. EN 60268-5:2003 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
| I.S. EN 61481-2:2014 | LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C. |
| DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 13355 : 2004 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| I.S. EN ISO 3381:2011 | RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES |
| DIN EN 15036-2:2006-12 | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator |
| DIN EN 13141-2:2010-12 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 13355:2005 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| I.S. EN 13141-2:2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| VDI 3766:2012-09 | Ultrasound - Workplace - Measurement, assessment, judgement and reduction |
| VDI 3743 Blatt 1:2003-09 | Characteristic noise emission values of technical sound sources - Pumps; Centrifugal pumps |
| VDI 2038 Blatt 3:2013-11 | Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Secondary airborne sound - prognosis, measurement, evaluation and reduction measures |
| UNE-EN 61400-11:2013 | Wind turbines - Part 11: Acoustic noise measurement techniques |
| 10/30214903 DC : 0 | BS EN ISO 3095 - RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES |
| PD CEN/TR 15068:2009 | Gas welding equipment. Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering. Measurement method |
| I.S. EN ISO 140-12:2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
| PREN 50332-2 : DRAFT 2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY |
| BS EN 50332-1:2013 | Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology General method for \'one package equipment\' |
| BS EN 60534-8-1:2005 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves |
| 04/30124314 DC : 0 | EN 15068 - GAS WELDING EQUIPMENT - LABORATORY MEASUREMENT OF NOISE EMITTED BY BLOWPIPES FOR WELDING, CUTTING, HEATING, BRAZING AND SOLDERING - MEASUREMENT METHOD |
| BS EN 61243-1 : 2005 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| I.S. EN 60534-8-1:2005 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
| 13/30281662 DC : 0 | BS EN 50332-1 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT" |
| BS EN 61996:2001 | Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Performance requirements. Methods of testing and required test results |
| UNI EN 54-24 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
| 02/560743 DC : DRAFT FEB 2002 | BS EN 14366 - LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
| PREN 50332-1 : DRAFT 2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT" |
| BS EN 61237-4:1998 | Broadcast video tape recorders. Methods of measurement Analogue audio performance measurements |
| BS EN 60704-1 : 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 15610:2009 | RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
| S.R. CEN/TS 16272-7:2015 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 7: EXTRINSIC CHARACTERISTICS - IN SITU VALUES OF INSERTION LOSS |
| CEI EN 60534-8-1 : 2006 | VANNES DE REGULATION DES PROCESSUS INDUSTRIELS - PARTIE 8-1: CONSIDERATIONS SUR LE BRUIT - MESURE EN LABORATOIRE DU BRUIT CREE PAR UN DEBIT AERODYNAMIQUE A TRAVERS UNE VANNE DE REGULATION |
| UNE-EN 61481-2:2015 | Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| EN 61996-1 : 2013 COR 2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 61996-1:2013) |
| I.S. EN 61400-11:2013 | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES (IEC 61400-11:2012 (EQV)) |
| UNI CEN/TS 16272-5 : 2014 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS |
| UNI EN 54-16 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
| UNI EN ISO 10052 : 2010 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
| EN 1793-5:2016 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions |
| I.S. EN 60268-16:2011 | SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX |
| DIN EN ISO 3822-1:2009-07 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999+Amd. 1:2008) (includes Amendment A1:2008) |
| ISO 3822-1:1999 | Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement |
| UNE-EN 13141-2:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| BS EN ISO 16032:2004 | Acoustics. Measurement of sound pressure level from service equipment in buildings. Engineering method |
| EN 60268-16:2011 | SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX |
| EN 15036-2:2006 | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator |
| UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 13141-2 : 2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| UNI EN 13355 : 2009 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| UNI EN ISO 3822-1 : 2009 | ACOUSTICS - LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT USED IN WATER SUPPLY INSTALLATIONS - PART 1: METHOD OF MEASUREMENT |
| UNE-EN 54-16:2010 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| 99/710387 DC : DRAFT JUN 99 | EN ISO 15744 - HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
| NF EN 15461 : 2008 + A1 2011 | RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
| BS EN 60118-15:2012 | Electroacoustics. Hearing aids Methods for characterising signal processing in hearing aids with a speech-like signal |
| UNI EN 15610 : 2009 | RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
| CEI EN 61400-11 : 2014 | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| DIN EN 15610:2009-08 | Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation |
| UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
| BS EN 61996-2:2008 | Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR) Simplified voyage data recorder (S-VDR). Performance requirements, methods of testing and required test results |
| CEI EN 61996-2 : 2011 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE ATA RECORDER (S-VDR) - PERFORMANCE REQUIREMENTS, METHODS OF ESTING AND REQUIRED TEST RESULTS |
| BS EN 50332-2:2013 | Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design |
| UNI EN 15461 : 2011 | RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS |
| CEI EN 60118-15 : 2014 | ELECTROACOUSTICS - HEARING AIDS - PART 15: METHODS FOR CHARACTERISING SIGNAL PROCESSING IN HEARING AIDS WITH A SPEECH-LIKE SIGNAL |
| I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| ANSI S3.40 : 2002 | |
| I.S. EN 61606-3:2008 | AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE |
| BS EN 15610:2009 | Railway applications. Noise emission. Rail roughness measurement related to rolling noise generation |
| I.S. EN 61243-3:2014 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| 16/30348450 DC : 0 | BS EN 13819-3 - HEARING PROTECTORS - TESTING - PART 3: SUPPLEMENTARY ACOUSTIC TEST METHOD |
| I.S. EN 54-24:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
| BS EN 60704-2-3:2002 | Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for dishwashers |
| CEI EN 61606-3 : 2009 | AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE |
| BS EN 61400-11 : 2013 | WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| UNE-EN 1793-5:2016 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions |
| I.S. EN 61243-1:2005 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| EN 15610:2009 | Railway applications - Noise emission - Rail roughness measurement related to noise generation |
| I.S. EN 54-16:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
| I.S. EN 61237-4:1998 | BROADCAST VIDEO TAPE RECORDERS - METHODS OF MEASUREMENT - PART 4: ANALOGUE PERFORMANCE MEASUREMENTS |
| EN ISO 3381:2011 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
| DIN EN ISO 3381:2011-05 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
| ISO 16032:2004 | Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method |
| BS EN 15036-2:2006 | Heating boilers. Test regulations for airborne noise emissions from heat generators Flue gas noise emissions at the outlet of the heat generator |
| ISO 10052:2004 | Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method |
| ISO 3381:2005 | Railway applications Acoustics Measurement of noise inside railbound vehicles |
| BS EN ISO 140-12:2000 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor |
| BS EN 15433-4:2007 | Transportation loads. Measurement and evaluation of dynamic mechanical loads Data evaluation |
| BS EN ISO 3822-1 : 1999 | ACOUSTICS - LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT USED IN WATER SUPPLY INSTALLATIONS - PART 1: METHOD OF MEASUREMENT |
| ISO 140-12:2000 | Acoustics Measurement of sound insulation in buildings and of building elements Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor |
| BS EN ISO 3381:2011 | Railway applications. Acoustics. Measurement of noise inside railbound vehicles |
| UNE-EN 61243-3:2015 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| EN 54-24:2008 | Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers |
| EN ISO 140-12 : 2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
| EN 54-16:2008 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| EN 15433-4:2007 | Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation |
| EN ISO/TS 15694 : 2004 | MECHANICAL VIBRATION AND SHOCK - MEASUREMENT AND EVALUATION OF SINGLE SHOCKS TRANSMITTED FROM HAND-HELD AND HAND-GUIDED MACHINES TO THE HAND-ARM SYSTEM |
| EN ISO 16032:2004 | Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004) |
| EN 1454 : 1997 | PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY |
| EN 15461:2008+A1:2010 | Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements |
| CEN/TR 15068:2009 | Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method |
| DIN EN 15461:2011-01 | Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements (includes Amendment A1:2010) |
| I.S. EN 60704-1:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010 (EQV)) |
| UNI EN 15433-4 : 2008 | TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 4: DATA EVALUATION |
| BS EN 54-24:2008 | Fire detection and fire alarm systems Components of voice alarm systems. Loudspeakers |
| 01/560341 DC : DRAFT JAN 2001 | BS EN ISO 3381 - RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES |
| BS EN 60268-16:2011 | Sound system equipment Objective rating of speech intelligibility by speech transmission index |
| CEI EN 60315-4 : 1999 | METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 4: RECEIVERS FOR FREQUENCY-MODULATED SOUND BROADCASTING EMISSIONS |
| 07/30174056 DC : 0 | BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| I.S. EN 1793-5:2016 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS |
| I.S. EN 50332-2:2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY, OR ARE OFFERED AS ONE PACKAGE EQUIPMENT BUT WITH STANDARDISED CONNECTORS BETWEEN THE TWO ALLOWING TO COMBINE COMPONENTS OF DIFFERENT MANUFACTURERS |
| UNE-EN 60118-15:2012 | Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal |
| I.S. EN 61481-1:2014 | LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| DIN EN 54-24:2008-06 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
| I.S. EN 61996-2:2008 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| NF EN 15610 : 2009 | RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
| UNE-EN 15610:2010 | Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation |
| BS EN ISO 10052 : 2004 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
| BS EN 1454:1997 | Portable, hand-held, internal combustion cutting-off machines. Safety |
| CEN/TS 16272-5:2014 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| EN 61237-4:1997 | Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements |
| UNI EN ISO 3381 : 2011 | RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES |
| EN 61481-2:2014 | Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| EN 60268-5:2003/A1:2009 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
| EN 61606-3 : 2008 | AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE |
| EN 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
| CEN/TS 16272-7:2015 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 7: Extrinsic characteristics - In situ values of insertion loss |
| DIN EN 54-16:2008-06 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| DIN EN ISO 16032:2004-12 | Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004) |
| EN 50332-1:2013 | Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment" |
| I.S. EN ISO 16032:2004 | ACOUSTICS - MEASUREMENT OF SOUND PRESSURE LEVEL FROM SERVICE EQUIPMENT IN BUILDINGS - ENGINEERING METHOD |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| EN 60804:2000 | Integrating-averaging sound level meters |
| IEC 60050-801:1994 | International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| EN 60651:1994/A2:2001 | SOUND LEVEL METERS (IEC 60651:1979/A2:2000) |
| CISPR 16-1:1999+AMD1:2002 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus |
| IEC 60651:1979+AMD1:1993+AMD2:2000 CSV | Sound level meters |
| IEC 60804:2000 | Integrating-averaging sound level meters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.