EN 61248-7:1997
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure
04-01-1998
08-08-1997
FOREWORD
1 Scope
2 Normative references
3 Preparation of the detail specification
3.1 General
3.2 Ratings and characteristics
3.3 Outline drawings and winding schematic
diagram
4 Inspection requirements to be listed in the detail
specification
4.1 Conformance inspection
4.2 Design verification
5 Detail specification
Blank detail specification
Annex A (normative) Test methods peculiar to coils or
intermediate frequency transformers
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Specifies how to prepare detail specifications for high-frequency inductors and intermediate frequency transformers between 10 kHz and 2 GHz.Includes a blank detail specification, which shows the format and indicates which tests are considered to be appropriate to this type of component.
Committee |
CLC/SR 51
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Withdrawn
|
Standards | Relationship |
NF EN 61248-7 : 1998 | Similar to |
IEC 61248-7:1997 | Identical |
NBN EN 61248-7 : 1998 | Identical |
I.S. EN 61248-7:1998 | Identical |
PN EN 61248-7 : 2004 | Identical |
SN EN 61248-7 : 1997 | Identical |
UNE-EN 61248-7:1997 | Identical |
BS EN 61248-7:1998 | Identical |
CEI EN 61248-7 : 1998 | Identical |
DIN EN 61248-7:1998-05 | Identical |
HD 323.2.20 : 200S3 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING |
IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 61248-1:1996 | Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification |
EN 61007:1997 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
EN 61248-1 : 1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification |
HD 323.2.14 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST N: OF TEMPERATURE |
IEC 61007:1994 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
IECQ 001004:2006 | |
IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
HD 323.2.3 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST CA - DAMP HEAT, STEADY STATE |
IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
IEC GUIDE 102:1996 | Electronic components - Specification structures for quality assessment (Qualification approval and capability approval) |
EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
EN 60068-2-29:1993 | Environmental testing - Part 2: Tests - Test Eb and guidance: Bump |
EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
IEC 60068-2-29:1987 | Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
ISO 129:1985 | Technical drawings Dimensioning General principles, definitions, methods of execution and special indications |
IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
ISO 128:1982 | Technical drawings — General principles of presentation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.