EN 61169-16:2007
Current
The latest, up-to-date edition.
Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms) (type N)
04-11-2007
FOREWORD
1 Scope
2 Normative references
3 IEC type designation
4 Interface dimensions
4.1 Dimensions - General purpose connectors - Grade 2
5 Mechanical gauges and standard test connectors
5.1 Mechanical gauges
5.2 Standard test connectors - Grade 0
6 Overall dimensions
7 Quality assessment procedures
7.1 General
7.2 Ratings and characteristics
7.3 Test schedule and inspection requirements
7.4 Procedures
8 Instructions for preparation of detail specifications
8.1 General
8.2 Identification of the Detail specification
8.3 Identification of the component
8.4 Performance
8.5 Marking, ordering information and related matters
8.6 Selection of tests, test conditions and severities
8.7 Blank detail specification pro-forma for type N
connector
Annex A (informative) - Guidance information for interface
dimensions of 75 ohms characteristic impedance
general purpose connectors
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Bibliography
Provides information and rules for the preparation of Detail Specifications (DS) for pin and socket R.F. coaxial connectors, with screw coupling mechanism, for low to medium power applications. The connector is commonly known as the 'type N'. Three versions of the 50 characteristic impedance type N connector are included, each version being mateable with each of the others.
| Committee |
CLC/SR 46F
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN IEC 61169-16 : 2007 | Identical |
| UNE-EN 61169-16:2007 | Identical |
| NBN EN 61169-16 : 2007 | Identical |
| CEI EN 61169-16 : 2008 | Identical |
| I.S. EN 61169-16:2007 | Identical |
| PN EN 61169-16 : 2007 | Identical |
| DIN EN 61169-16:2007-10 | Identical |
| NF EN 61169-16 : 2006 PR | Identical |
| IEC 61169-16:2006 | Identical |
| BS EN 61169-16:2007 | Identical |
| PNE-prEN 61169-16 | Identical |
| BS EN 60512-29-100:2015 | Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g |
| BS EN 60512-27-100:2012 | Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors. Tests 27a to 27g |
| I.S. EN 50289-1-1:2017 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS |
| CEI EN 60512-29-100 : 2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G |
| EN 60512-27-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g |
| EN 60512-29-100:2015 | Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g |
| BS EN 60512-26-100 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G |
| I.S. EN 60512-29-100:2015 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G |
| I.S. EN 60512-28-100:2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 28-100: SIGNAL INTEGRITY TESTS UP TO 1000 MHZ ON IEC 60603-7 AND IEC 61076-3 SERIES CONNECTORS - TESTS 28A TO 28G (IEC 60512-28-100:2013(EQV)) |
| I.S. EN 60512-27-100:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 27-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON IEC 60603-7 SERIES CONNECTORS - TESTS 27A TO 27G (IEC 60512-27-100:2011 (EQV)) |
| BS EN 50289-1-1:2017 | Communication cables. Specifications for test methods Electrical test methods. General requirements |
| PREN 50289-1-1 : DRAFT 2016 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS |
| EN 60512-28-100:2013 | Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g |
| CEI EN 60512-27-100 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 27-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON IEC 60603-7 SERIES CONNECTORS - TESTS 27A TO 27G |
| CEI EN 60512-28-100 : 2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 28-100: SIGNAL INTEGRITY TESTS UP TO 1000 MHZ ON 60603-7 AND 61076-3 SERIES CONNECTORS - TESTS 28A TO 28G |
| CEI EN 50289-1-1 : 2001 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS |
| I.S. EN 60512-26-100:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G |
| 16/30342119 DC : 0 | BS EN 50289-1-1 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS |
| BS EN 60512-28-100:2013 | Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 1000 MHz on IEC 60603-7 and IEC 61076-3 series connectors. Tests 28a to 28g |
| UNE-EN 50289-1-1:2017 | Communication cables - Specifications for test methods - Part 1-1: Electrical test methods - General requirements |
| EN 50289-1-1:2017 | Communication cables - Specifications for test methods - Part 1-1: Electrical test methods - General requirements |
| EN 60512-26-100:2008/A1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G |
| HD 351.1 : 200S1 | RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - GENERAL REQUIREMENTS AND MEASURING METHODS |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| HD 351.2 : 200S1 | RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - 50 OHM 7 mm RIGID PRECISION COAXIAL LINE AND ASSOCIATED HERMAPHRODITIC PRECISION COAXIAL CONNECTOR |
| IEC 60096-2:1961 | Radio-frequency cables - Part 2: Relevant cable specifications |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 61169-1:2013/AC:2016-02 | RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013) |
| IEC 61169-1:2013 | Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods |
| HD 351.3 : 200S2 | RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - 14mm RIGID PRECISION COAXIAL LINE AND ASSOCIATED HERMAPHRODITIC PRECISION COAXIAL CONNECTOR - CHARACTERISTIC IMPEDANCES 50 OHMS AND 75 OHMS |
| HD 351.4 : 200S2 | RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - 21mm RIGID PRECISION COAXIAL LINE AND ASSOCIATED HERMAPHRODITIC PRECISION COAXIAL CONNECTOR - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE 9/21) - CHARACTERISTIC IMPEDANCE 75 OHMS (TYPE 6/21) |
| ISO 370:1975 | Toleranced dimensions Conversion from inches into millimetres and vice versa |
| HD 351.5 : 200S1 | RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - 50 OHMS 3.5 MM RIGID PRECISION COAXIAL LINE WITH PROVISION FOR MOUNTING CONNECTORS |
| ISO 263:1973 | ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.