EN 61061-2:2001/corrigendum:2002
Current
The latest, up-to-date edition.
SPECIFICATION FOR NON-IMPREGNATED, DENSIFIED LAMINATED WOOD FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
02-07-2002
INTRODUCTION
1 Scope
2 Normative references
3 Conditioning of test specimens
4 Drying of test specimens
5 Dimensions
5.1 Thickness
5.2 Flatness
6 Mechanical tests
6.1 Flexural strength
6.2 Apparent modulus of elasticity in flexure
6.3 Compressive strength
6.4 Compressibility
6.5 Impact strength
6.6 Shearing strength test for glue line bond
6.7 Tensile strength
6.8 Internal ply strength
7 Electrical tests
7.1 Electric strength and breakdown voltage
8 Thermal tests
9 Physical and chemical tests
9.1 Apparent density
9.2 Water absorption
9.3 Moisture content
9.4 Shrinkage in air after drying
9.5 Oil absorption
9.6 Ash content
9.7 Contamination of liquid dielectrics
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Provides methods of test for the materials defined in IEC 61061-1.
| Committee |
SR 15
|
| DocumentType |
Test Method
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| VDE 0310-2 : 2002 | Identical |
| IEC 61061-2:1992+AMD1:2001 CSV | Identical |
| NEN EN IEC 61061-2 : 2002 C11 2002 | Identical |
| PN EN 61061-2 : 2002 AC 2008 | Identical |
| NF EN 61061-2 : 2002 | Identical |
| NBN EN 61061-2 : 2002 | Identical |
| SN EN 61061-2 : 2001 AMD 1 2001 | Identical |
| CEI EN 61061-2 : 2002 | Identical |
| I.S. EN 61061-2:2001 | Identical |
| DIN EN 61061-2 : 2002 | Identical |
| BS EN 61061-2:2001 | Identical |
| UNE-EN 61061-2:2001 CORR:2002 | Identical |
| BS EN 61061-1:2006 | Non-impregnated densified laminated wood for electrical purposes Definitions, designation and general requirements |
| CEI EN 61061-3-2 : 2002 | NON-IMPREGNATED DENSIFIED LAMINATED WOOD FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: RINGS PRODUCED FROM BEECH VENEER |
| I.S. EN 61061-1:2006 | NON-IMPREGNATED DENSIFIED LAMINATED WOOD FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATION AND GENERAL REQUIREMENTS |
| CEI EN 61061-1 : 2007 | NON-IMPREGNATED DENSIFIED LAMINATED WOOD FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATION AND GENERAL REQUIREMENTS |
| BS EN 61061-3-2:2002 | Non-impregnated densified laminated wood for electrical purposes. Specification for individual materials Rings produced from beech veneer |
| EN 61061-1:2006 | Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
| HD 559.1 : 200S1 | METHODS OF TEST FOR ELECTRIC STRENGTH OF SOLID INSULATING MATERIALS - TESTS AT POWER FREQUENCIES |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| IEC 60247:2004 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
| ISO 179:1993 | Plastics Determination of Charpy impact strength |
| ISO 178:2010 | Plastics Determination of flexural properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.