EN 61000-4-2:2009
Current
Current
The latest, up-to-date edition.
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
Published date
03-31-2009
Sorry this product is not available in your region.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Test levels
6 Test generator
7 Test setup
8 Test procedure
9 Evaluation of test results
10 Test report
Annex A (informative) - Explanatory notes
Annex B (normative) - Calibration of the current measurement
system and measurement of discharge current
Annex C (informative) - Example of a calibration target
meeting the requirements of Annex B
Annex D (informative) - Radiated fields from human metal
discharge and ESD generators
Annex E (informative) - Measurement uncertainty (MU)
considerations
Annex F (informative) - Variation in test results and
escalation strategy
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 61000-4-2:2008 relates to the immunity requirements and test methods for electrical and electronic equipment subjected to static electricity discharges, from operators directly, and from personnel to adjacent objects. It additionally defines ranges of test levels which relate to different environmental and installation conditions and establishes test procedures. The object of IEC 61000-4-2:2008 is to establish a common and reproducible basis for evaluating the performance of electrical and electronic equipment when subjected to electrostatic discharges. In addition, it includes electrostatic discharges which may occur frompersonnel to objects near vital equipment. IEC 61000-4-2:2008 defines typical waveform of the discharge current, range of test levels, test equipment, test setup, test procedure, calibration procedure and measurement uncertainty. IEC 61000-4-2:2008 gives specifications for test performed in "laboratories" and "post-installation tests" performed on equipment in the final installation. This second edition cancels and replaces the first edition published in 1995, its amendment 1 (1998) and its amendment 2 (2000) and constitutes a technical revision. It has the status of a basic EMC publication in accordance with IEC Guide 107. The main changes with respect to the first edition of this standard and its amendments are the following:- the specifications of the target have been extended up to 4 GHz. An example of target matching these requirements is also provided;- information on radiated fields from human-metal discharge and from ESD generators is provided;- measurement uncertainty considerations with examples of uncertainty budgets are given too.
| Committee |
CLC/TC 210
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 61000-4-2:2009 | Identical |
| CEI EN 61000-4-2 : 2011 | Identical |
| IEC 61000-4-2:2008 | Identical |
| I.S. EN 61000-4-2:2009 | Identical |
| NEN EN IEC 61000-4-2 : 2009 | Identical |
| NF EN 61000 4-2 : 2009 | Identical |
| NEN 11000-4-2 : 1995 | Similar to |
| DIN EN 61000-4-2 : 2009 | Identical |
| SN EN 61000-4-2 : 1995 AMD 2 2001 | Identical |
| PN EN 61000-4-2 : 2011 | Identical |
| NBN EN 61000 4-2 : 2009 | Identical |
| UNE-EN 61000-4-2:2010 | Identical |
| VDE 0847-4-2 : 2009 | Identical |
| UNI EN 1300 : 2014 | SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| BS EN 60846-1:2014 | Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Portable workplace and environmental meters and monitors |
| BS EN 50165:1997 | Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements |
| BS EN 61076-3-112:2006 | Connectors for electronic equipment Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment |
| I.S. EN 61204-3:2000 | LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
| BS EN 16314:2013 | Gas meters. Additional functionalities |
| CEI EN 62026-7 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET |
| BS EN 50065-2-3:2003 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 Khz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
| 11/30253123 DC : 0 | BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| BS EN 50240:2004 | Electromagnetic compatibilty (EMC). Product standard for resistance welding equipment |
| BS EN 61481-1:2014 | Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c. |
| 13/30252780 DC : 0 | BS EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| BS EN 60546-1:2010 | Controllers with analogue signals for use in industrial-process control systems Methods of evaluating the performance |
| NF EN 50491-5-2 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT |
| BS EN 61674:2013 | Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| 02/540559 DC : DRAFT JULY 2002 | EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| CEI EN 62341-5 : 2011 | ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS |
| CEI EN 61131-6 : 2013 | PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY |
| BS EN 15684:2012 | Building hardware. Mechatronic cylinders. Requirements and test methods |
| I.S. EN 60947-5-1:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
| CLC/TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
| BS EN 61131-6:2012 | Programmable controllers Functional safety |
| CEI EN 61869-6 : 1ED 2017 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| I.S. EN 62026-1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES |
| BS EN 62575-1:2016 | Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification |
| CEI EN 60942 : 2004 | ELECTROACOUSTICS SOUND CALIBRATORS |
| 10/30219053 DC : 0 | BS EN 50130-4 - ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS |
| I.S. EN 50065-2-2:2003 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS |
| TS 101 012 : 1.2.1 | TRANSMISSION AND MULTIPLEXING (TM); BROADBAND ACCESS DIGITAL SECTION AND NT FUNCTIONAL REQUIREMENTS |
| BS EN 62484:2015 | Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material |
| BS EN 61757-1:2012 | Fibre optic sensors Generic specification |
| BS EN 50412-2-1:2005 | Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Residential, commercial and industrial environment - Immunity requirements |
| CEI EN 60947-5-3 : 2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| BS EN 61036:1997 | Alternating current static watt-hour meters for active energy (classes 1 and 2) |
| 09/30202737 DC : 0 | BS EN 15964 - BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| CEI UNI EN 50518-1 : 2015 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| 07/30166139 DC : 0 | BS EN 15684 - BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
| EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
| 02/709474 DC : DRAFT JULY 2002 | BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| I.S. EN 61800-3:2005 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV)) |
| PREN 12895 : DRAFT 2013 | INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| 13/30252774 DC : 0 | BS EN 50121-3-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| DIN V ENV 50121-4 : 1997 | BAHNANWENDUNGEN - ELEKTROMAGNETISCHE VERTRAEGLICHKEIT - STOERAUSSENDUNG UND STOERFESTIGKEIT VON SIGNAL- UND TELEKOMMUNIKATIONSEINRICHTUNGEN |
| 09/30192323 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) Generic standards. Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| 11/30251478 DC : 0 | BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| BS EN 50270:2015 | Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| BS EN 50293:2012 | Road traffic signal systems. Electromagnetic compatibility |
| BS EN 61260-1:2014 | Electroacoustics. Octave-band and fractional-octave-band filters Specifications |
| BS EN 62387:2016 | Radiation protection instrumentation. Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation |
| CEI EN 60601-1-2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| EN 60947-5-1:2017 | Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
| BS EN 16864:2017 | Building hardware. Mechatronic padlocks. Requirements and test methods |
| 04/30116621 DC : DRAFT JUL 2004 | EN 50121-3-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| 99/240940 DC : 0 | BS EN 50331-1 - PHOTOVOLTAIC SYSTEMS IN BUILDINGS - PART 1: SAFETY REQUIREMENTS |
| BS EN 62083:2009 | Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems |
| PREN 12405-3 : DRAFT 2013 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| BS EN 61582:2006 | Radiation protection instrumentation. In vivo counters. Classification, general requirements and test procedures for portable, transportable and installed equipment |
| BS EN 50065-2-2:2003 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments |
| PREN 50130-4 : DRAFT 2010 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS |
| CEI EN 50557 : 2012 | REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES |
| BS EN 55104:1995 | Electromagnetic compatibility. Immunity requirements for household appliances, tools and similar apparatus. Product family standard |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| DIN EN 12405-2:2012-10 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| PREN 15194 : DRAFT 2015 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| EG 201 784 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); GUIDANCE ON THE INCORPORATION OF ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS FOR RADIO EQUIPMENT INTO ETSI STANDARDS INTENDED TO BE REFERENCED UNDER COUNCIL DIRECTIVE 96/98/EC ON MARINE EQUIPMENT |
| I.S. EN 55104:1996 | ELECTROMAGNETIC COMPATIBILITY IMMUNITY REQUIREMENTS FOR HOUSEHOLD APPLIANCES, TOOLS AND SIMILAR APPARATUS PRODUCT FAMILY STANDARD |
| CEI EN 60761-1 : 2005 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
| S.R. HD 60364-5-51:2009 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
| I.S. EN 61757-1:2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV)) |
| I.S. EN 16864:2017 | BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| CEI EN 50293 : 2013 | ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY |
| I.S. EN 50491-5-2:2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS, FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT |
| I.S. EN 60974-10:2014 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| I.S. EN 61326-3-2:2008 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
| CEI EN 61069-1 : 1998 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
| I.S. EN 60204-31:2013 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 31: PARTICULAR SAFETY AND EMC REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (IEC 60204-31:2013 (EQV)) |
| BS EN 61672-2 : 2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| I.S. EN IEC 61643-331:2018 | COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTION - PART 331: PERFORMANCE REQUIREMENTS AND TEST METHODS FOR METAL OXIDE VARISTORS (MOV) |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 61076-3-112:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-112: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR RECTANGULAR CONNECTORS WITH FOUR CONTACTS FOR HIGH PERFORMANCE SERIAL BUS FOR CONSUMER AUDIO/VIDEO EQUIPMENT |
| I.S. EN IEC 60942:2018 | ELECTROACOUSTICS - SOUND CALIBRATORS |
| I.S. EN 61869-6:2016 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| BS EN 60947-2:2017 | Low-voltage switchgear and controlgear Circuit-breakers |
| CEI EN 61672-2 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| BS EN 60770-1:1999 | Transmitters for use in industrial-process control systems Methods for performance evaluation |
| I.S. EN 62244:2011 | RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS |
| UNE-EN 50121-3-2:2017 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| UNE-EN 50121-5:2018 | Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI CEI EN 50518-1 : 2014 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| I.S. EN 62387:2016 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION |
| I.S. EN 62387-1:2012 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007 (MOD)) |
| NF EN 12405-1 : 2005 + A2 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 63024:2018 | REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT-BREAKERS, RCBOS AND RCCBS FOR HOUSEHOLD AND SIMILAR USES |
| 17/30358367 DC : 0 | BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 60945:2002 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| BS EN 55024 : 2010 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
| I.S. EN 62488-2:2017 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| NF EN 55103-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIO-VISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY |
| I.S. EN 61076-4-103:1999 | CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2.5 MM |
| I.S. EN 60546-1:2010 | CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE |
| I.S. EN 62341-5:2009 | ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS |
| I.S. EN 60770-1:2011 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
| I.S. EN 61674:2013 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMICONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING (IEC 61674:2012 (EQV)) |
| I.S. EN 12895:2015 | INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| BS EN 62026-2:2013 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) Actuator sensor interface (AS-i) |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| DIN EN 13763-26:2004-11 | Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays; German version EN 13763-26:2004 |
| DIN EN 12953-9:2007-09 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| DIN EN 1760-3:2009-07 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| UNE-EN 298:2013 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| BS EN 45501:2015 | Metrological aspects of non-automatic weighing instruments |
| BS EN 13718-1:2014 | Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances |
| UNE-EN 12645:2015 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| BS EN 12414:1999 | Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements |
| BS EN 62026-3:2015 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) DeviceNet |
| BS EN 61851-21:2002 | Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
| BS EN 12645:2014 | Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing |
| UNE-EN 61812-1:2012 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| UNE-EN 15684:2015 | Building hardware - Mechatronic cylinders - Requirements and test methods |
| BS EN 12895:2015 | Industrial trucks. Electromagnetic compatibility |
| UNE-EN 50083-2:2013 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| CEN/TS 14507-1:2003 | Inhalational nitric oxide systems - Part 1: Delivery systems |
| EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
| EN 50325-3:2001 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 3: Smart Distributed System (SDS) |
| EN 12405-2:2012 | Gas meters - Conversion devices - Part 2: Energy conversion |
| EN 60770-1:2011 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
| DIN EN 230:2005-10 | AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| DIN EN 14154-2:2011-06 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| EN 60651:1994/A2:2001 | SOUND LEVEL METERS (IEC 60651:1979/A2:2000) |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN 61582:2006 | Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment |
| EN 60947-6-1:2005/A1:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT (IEC 60947-6-1:2005/A1:2013) |
| EN 61000-6-5:2015/AC:2018-01 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT (IEC 61000-6-5:2015/COR1:2017) |
| EN 61019-1:2005 | Surface acoustic wave (SAW) resonators - Part 1: Generic specification |
| EN 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
| EN 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| EN 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| EN 62080:2009/A2:2015 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES (IEC 62080:2001/A2:2015) |
| EN 61260-1:2014 | Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications |
| DIN EN 14846:2008-11 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| EN 55014-2:2015 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
| EN 12895:2015 | Industrial trucks - Electromagnetic compatibility |
| EN 61960-2:2001 | Secondary lithium cells and batteries for portable applications - Part 2: Secondary lithium batteries |
| EN 50293:2012 | Road traffic signal systems - Electromagnetic compatibility |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 60947-8:2003/A2:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011) |
| EN 60601-1-2:2015 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| EN 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
| EN 12405 : 2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| EN 50412-2-1 : 2005 COR 2009 | POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
| EN 62484:2015 | Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material |
| EN 62341-5:2009 | Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods |
| EN 60947-4-1 : 2010 AMD 1 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
| DIN EN ISO 21649:2010-01 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN 62387-1:2012 | Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements |
| EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
| EN 12952-11:2007 | Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories |
| EN 60669-2-5:2016 | Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
| EN 12645:2014 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| EN 61076-4-103:1999 | Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm |
| EN 62310-2:2007 | Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements |
| EN 62604-1:2015 | Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification |
| EN 55020:2007/A12:2016 | SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 20:2006) |
| EN 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| EN 62387:2016 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION (IEC 62387:2012, MODIFIED) |
| EN 62327:2011 | RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE INDICATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION |
| EN 61800-5-2:2017 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
| EN 50083-2:2012/A1:2015 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| EN 50518-1:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| EN 61481-1:2014 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| EN 61850-3:2014 | Communication networks and systems for power utility automation - Part 3: General requirements |
| EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| EN 13544-1:2007+A1:2009 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| EN 61298-3:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
| EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| EN 60947-6-2:2003/A1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS) |
| EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| VDS 2358 : 2009 | |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| PREN 1643 : DRAFT 2012 | VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| I.S. EN 62080:2009 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| UNE-EN 60947-5-3:2014 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| BS EN 60947-4-1 : 2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| CEI 13-32 : 2000 | WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS |
| I.S. CLC/TR 50450:2006 | RESISTIBILITY REQUIREMENTS FOR EQUIPMENT HAVING (A) TELECOMMUNICATION PORT(S) |
| NF EN 301489-1 : 2012 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES - PART 1: COMMON TECHNICAL REQUIREMENTS |
| I.S. EN 61326-1:2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012 (EQV)) |
| CEI EN 50121-3-2 : 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| BS EN 60861:2008 | Equipment for monitoring of radionuclides in liquid effluents and surface waters |
| 11/30255400 DC : 0 | BS EN 50293 - ELECTROMAGNETIC COMPATIBILITY - ROAD TRAFFIC SIGNAL SYSTEMS |
| BS EN 60268-4:2014 | Sound system equipment Microphones |
| PREN 12405-1 : DRAFT 2017 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 12/30267815 DC : 0 | BS EN 1643 - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| BS EN 61000-6-2:2005 | Electromagnetic compatibility (EMC) Generic standards - Immunity for industrial environments |
| BS EN 60974-10 : 2014 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| 15/30298550 DC : 0 | BS EN 16864 - BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 61481-1:2015 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| BS EN 62026-7:2013 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) CompoNet |
| UNE-EN 60947-5-2:2008 | Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches |
| BS EN 62341-5:2009 | Organic light emitting diode (OLED) displays Environmental testing methods |
| I.S. EN 12405:2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| UNI EN 14846 : 2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| BS EN 62533:2016 | Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material |
| BS EN 60942:2003 | Electroacoustics. Sound calibrators |
| BS EN 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications |
| NF EN 301011 : 2000 | |
| TS 102 192-1 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); INTERNATIONAL TECHNICAL CHARACTERISTICS AND TEST METHODS; PART 1: WIRELESS/RADIO MICROPHONES IN THE 25 MHZ TO 3 GHZ FREQUENCY RANGE |
| DD CEN/TS 14507-1:2003 | Inhalational nitric oxide systems Delivery systems |
| 16/30340737 DC : 0 | BS EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| BS EN 14846:2008 | Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods |
| CEI EN 61547 : 2010 | EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS |
| PD CLC/TS 62603-1:2014 | Industrial process control systems. Guideline for evaluating process control systems Specifications |
| CEI EN 61326-3-2 : 2011 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
| BS EN 60947-5-3:2013 | Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| I.S. EN 61000-6-1:2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| DIN EN 14846:2015-07 (Draft) | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| NF ETS 300342-3 : 2001 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) FOR EUROPEAN DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (GSM 900 MHZ AND DCS 1800 MHZ) - PART 3: BASE STATION RADIO AND ANCILLARY EQUIPMENT AND REPEATERS MEETING PHASE 2 GSM REQUIREMENTS |
| BS EN 61076-4-103:1999 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards |
| UNE-EN 50293:2013 | Road traffic signal systems - Electromagnetic compatibility |
| BS EN 61481-2:2014 | Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| BS EN 61252 : 1997 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
| 03/102517 DC : 0 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS - REQUIREMENTS AND TEST METHODS |
| PREN 50121-5 : DRAFT 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| BS EN 50491-5-2:2010 | General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
| NF EN 61204-3 : 2001 | LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
| 03/112283 DC : DRAFT AUG 2003 | EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| NF EN 61543 : 96 AMD 2 2006 | RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY |
| 04/30116612 DC : DRAFT JUL 2004 | EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| 13/30276231 DC : 0 | BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| BS EN 60862-1:2015 | Surface acoustic wave (SAW) filters of assessed quality Generic specification |
| BS EN 50325-3:2001 | Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces Smart distributed systems (SDS) |
| I.S. EN 61812-1:2011 | TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| 03/111744 DC : DRAFT JULY 2003 | |
| BS EN 50295:1999 | Low-voltage switchgear and controlgear. Controller and device interface systems. Actuator sensor interface (AS-i) |
| CEI EN 61851-22 : 2003 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION |
| CEI EN 62488-2 : 1ED 2018 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| BS EN 50130-4 : 2011 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| CEI EN 62689-1 : 1ED 2017 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| 04/30115154 DC : DRAFT JUN 2004 | EN 50412-1 - IMMUNITY REQUIREMENTS FOR POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT |
| CEI EN 61076-3-112 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-112: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR RECTANGULAR CONNECTORS WITH FOUR CONTACTS FOR HIGH PERFORMANCE SERIAL BUS FOR CONSUMER AUDIO/VIDEO EQUIPMENT |
| PD CLC/TR 50450:2006 | Resistibility requirements for equipment having (a) telecommunication port(s) |
| I.S. EN 60669-2-5:2016 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-5: PARTICULAR REQUIREMENTS - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
| I.S. EN 16314:2013 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| CEI EN 61000-6-2 : 2006 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS |
| CEI EN 61526 : 2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS |
| BS EN 60255-26:2013 | Measuring relays and protection equipment Electromagnetic compatibility requirements |
| EN IEC 61058-1:2018 | Switches for appliances - Part 1: General requirements |
| UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
| CEI EN 60945 : 2003 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| ES 201 468 : 1.4.1 | ADDITIONAL ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS AND RESISTIBILITY REQUIREMENTS FOR TELECOMMUNICATIONS EQUIPMENT FOR ENHANCED AVAILABILITY OF SERVICE IN SPECIFIC APPLICATIONS |
| CEI EN 61786-1 : 2014 | MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS |
| I.S. EN 60325:2004 | RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS |
| CEI EN 62040-2 : 2006 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| UNI EN 15964 : 2011 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
| I.S. EN 62052-21:2004 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT |
| I.S. EN 12405-2:2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| BS EN 55020 : 2007 | SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
| I.S. EN 62534:2015 | RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL |
| BS EN 62026-1:2007 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) General rules |
| I.S. EN 60947-6-2:2003 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS) |
| I.S. EN 61543:1996 | RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY |
| BS EN 62327:2011 | Radiation protection instrumentation. Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation |
| I.S. EN 61000-6-5:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT |
| BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
| BS EN 61260-2 : 2016 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS |
| CEI EN 61326-3-1 : 2011 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS |
| BS EN 62052-21 : 2004 | ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004) |
| BS EN 61058-1 : 2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61058-1:2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS EN 61496-1:2013 | Safety of machinery. Electro-sensitive protective equipment General requirements and tests |
| I.S. EN 50325-1:2002 | INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 1: GENERAL REQUIREMENTS |
| BS EN 60947-1 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. EN 60947-6-1:2005 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT |
| I.S. EN 50470-1:2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| I.S. EN 60308:2005 | HYDRAULIC TURBINES - TESTING OF CONTROL SYSTEMS |
| I.S. EN 60651:1994 | SOUND LEVEL METERS (IEC 60651:1979 (EQV)) |
| I.S. EN 61547:2009 | EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS |
| EN 60947-2:2017 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| BS EN 60947-5-2 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES |
| EN 1434-4:2015 | Heat meters - Part 4: Pattern approval tests |
| CEI EN 61672-1 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 1: SPECIFICATIONS |
| I.S. EN 60947-5-2:2008 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007 (EQV)) |
| I.S. EN 61481-2:2014 | LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C. |
| BS EN 1434-4 : 2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| CEI EN 61131-9 : 2014 | PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI) |
| I.S. EN 62026-7:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET (IEC 62026-7:2010 (MOD)) |
| I.S. EN 1434-4:2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| 17/30333935 DC : 0 | BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| BS EN 50121-4:2016 | Railway applications. Electromagnetic compatibility Emission and immunity of the signalling and telecommunications apparatus |
| UNE-EN 62080:2010 | Sound signalling devices for household and similar purposes |
| CEI EN 62920 : 1ED 2018 | PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT |
| UNE-EN 14846:2010 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| UNE-EN 50518-1:2014 | Monitoring and alarm receiving centre - Part 1: Location and construction requirements |
| NF EN 15964 : 2011 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| PREN 15964 : DRAFT 2009 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 50121-5:2017 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| I.S. EN 60368-1:2000 | PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| I.S. ETSI EN 301489-1 V1.8.1:2009 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS |
| EN 61260:1995/A1:2001 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS |
| CEI EN 50121-4 : 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| I.S. EN 62135-2:2015 | RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| I.S. EN 62083:2009 | MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS |
| EN 62026-3:2015 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| I.S. EN 60947-8:2003 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003 (EQV)) |
| DIN EN 12645:2015-02 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| DIN EN 1643:2014-09 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| DIN EN 12016:2013-12 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 1760-3 : 2004 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| BS EN 14154-3 : 2005 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| BS EN 61131-2:2007 | Programmable controllers Equipment requirements and tests |
| I.S. EN 1643:2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| EN 60947-3:2009/A2:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015) |
| DIN EN 1643:2001-02 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| I.S. EN 14143:2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| I.S. EN 12016:2013 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| DIN EN 1434-4:2019-08 | Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018) |
| EN 62244:2011 | RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS |
| EN 15684:2012 | Building hardware - Mechatronic cylinders - Requirements and test methods |
| DIN EN 1300:2014-05 | SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| UNI EN 15684 : 2012 | BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12645:2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| DIN EN 1760-1:1997-09 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| I.S. EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| DIN EN 12405:2003-10 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| I.S. EN 809:1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| I.S. EN 298:2012 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| UNI EN 13718-1 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| DIN EN 1760-2:2001-07 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| VDI/VDE 2185 Blatt 1:2007-09 | Radio based communication in industrial automation |
| VDE V 0115-121-4 : 1997 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| VDE 0700-450 : 2001 | ELECTRICAL EQUIPMENT OF NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS |
| UNE-EN 50557:2012 | Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
| CEI EN 61260-2 : 2017 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS |
| BS EN 61869-6:2016 | Instrument transformers Additional general requirements for low-power instrument transformers |
| EN 60308:2005 | Hydraulic turbines - Testing of control systems |
| EN 61960-3:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them |
| NF EN 300385 : 2001 | |
| BS EN 62604-1:2015 | Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification |
| CEI EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| 09/30192320 DC : DRAFT MAY 2009 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 61098:2007 | Radiation protection instrumentation. Installed personnel surface contamination monitoring assemblies |
| I.S. EN 62689-1:2016 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| ETS 300 673 : 20001 | RADIO EQUIPMENT AND SYSTEMS (RES); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR 4/6 GHZ AND 11/12/14 GHZ VERY SMALL APERTURE TERMINAL (VSAT) EQUIPMENT AND 11/12/13/14 GHZ SATELLITE NEWS GATHERING (SNG) |
| BS EN 62244:2011 | Radiation protection instrumentation. Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders |
| BS EN 50518-1:2013 | Monitoring and alarm receiving centre Location and construction requirements |
| BS EN 62343-2:2014 | Dynamic modules Reliability qualification |
| 13/30289289 DC : 0 | BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| I.S. CEN/TS 14507-1:2003 | INHALATIONAL NITRIC OXIDE SYSTEMS - PART 1: DELIVERY SYSTEMS |
| 16/30340740 DC : 0 | BS EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| I.S. EN 62026-2:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) (IEC 62026-2:2008 (MOD)) |
| CEI EN 60044-7 : 2001 | INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS |
| BS EN 61513:2013 | Nuclear power plants. Instrumentation and control important to safety. General requirements for systems |
| 12/30241725 DC : 0 | BS ISO 28057 - DOSIMETRY WITH SOLID THERMOLUMINSCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY |
| BS EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) Generic standards. Immunity for residential, commercial and light-industrial environments |
| 11/30213789 DC : 0 | BS EN 50463-3 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING |
| I.S. EN 62484:2015 | RADIATION PROTECTION INSTRUMENTATION - SPECTROSCOPY-BASED PORTAL MONITORS USED FOR THE DETECTION AND IDENTIFICATION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL |
| CEI EN 62052-21 : 2005 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT |
| BS EN 61800-3 : 2004 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS |
| UNI EN 12405-2 : 2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| EN 61851-21:2002 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply |
| BS EN 61851-22:2002 | Electric vehicle conductive charging system A.C. electric vehicle charging station |
| BS EN 60308:2005 | Hydraulic turbines. Testing of control systems |
| BS EN 61676 : 2002 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY |
| DIN EN 15684:2013-01 | Building hardware - Mechatronic cylinders - Requirements and test methods |
| BS EN 62115 : 2005 | ELECTRIC TOYS - SAFETY |
| CEI EN 60580 : 2001 | MEDICAL ELECTRICAL EQUIPMENT DOSE AREA PRODUCT METERS |
| CEI EN 60947-5-9 : 2008 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES |
| 10/30217314 DC : 0 | BS EN 298 - AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| CEI EN 60546-1 : 2011 | CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE |
| TS 102 874-6 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); EXTERNAL COMMON POWER SUPPLY FOR CUSTOMER PREMISES NETWORK AND ACCESS EQUIPMENT; PART 6: CPS TYPE 2.D IMPLEMENTATION DETAILS |
| 13/30257892 DC : 0 | BS EN 12895 - INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| 06/30157139 DC : 0 | |
| UNE-EN 13637:2016 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| BS EN 50121-3-2:2016 | Railway applications. Electromagnetic compatibility Rolling stock. Apparatus |
| 11/30254162 DC : 0 | BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| UNE-EN 55103-2:2010 | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
| CEI EN 61812-1 : 2012 | TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| 04/30124466 DC : DRAFT OCT 2004 | EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 11/30213786 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| BS EN 60325:2004 | Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors |
| BS EN 61543:1996 | Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility |
| BS EN 50199:1996 | Electromagnetic compatibility (EMC). Product standard for arc welding equipment |
| BS EN 50463:2007 | Railway applications. Energy measurement on board trains |
| BS EN 61000-4-1:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Overview of IEC 61000-4 series |
| UNE-EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
| PREN 12067-2 : DRAFT 2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - PART 2: FUEL/AIR RATIO CONTROL/SUPERVISION OF THE ELECTRONIC TYPE |
| BS EN 62534:2015 | Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material |
| BS EN 50325-2:2001 | Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces DeviceNet |
| PREN 50293 : DRAFT 2011 | ELECTROMAGNETIC COMPATIBILITY - ROAD TRAFFIC SIGNAL SYSTEMS |
| BS EN 50325-1:2002 | Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces General requirements |
| 10/30203650 DC : 0 | BS EN 15684 - BUILDING HARDWARE - MECHATRONIC CYLINDERS FOR LOCKS - REQUIREMENTS AND TEST METHODS |
| BS EN 60368-1:2000 | Piezoelectric filters Generic specification |
| UNE-EN 55024:2011 | Information technology equipment - Immunity characteristics - Limits and methods of measurement |
| NF EN 301090 : 2001 | |
| I.S. EN 61000-6-7:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS |
| PREN 50518 : DRAFT 2016 | MONITORING AND ALARM RECEIVING CENTRE |
| EN 50121-5:2017 | Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
| CEI EN 61326-1 : 2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS |
| NF EN 300279 : 2001 | |
| PREN 45501 : DRAFT 2011 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| BS EN 61526:2013 | Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters |
| BS EN 60947-3 : 2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS |
| UNE-EN 61547:2011 | Equipment for general lighting purposes - EMC immunity requirements |
| I.S. EN 61326-3-1:2017 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS |
| I.S. EN 61158-2:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION |
| I.S. EN 60846-1:2014 | RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS |
| CEI EN 60770-1 : 2014 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
| I.S. EN 50130-4:2011 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| I.S. EN 60601-2-4:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CARDIAC DEFIBRILLATORS |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| I.S. EN 60947-5-3:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| I.S. EN 60335-1:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
| I.S. EN 50065-2-1:2003 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS |
| BS EN 1300:2013 | Secure storage units. Classification for high security locks according to their resistance to unauthorized opening |
| BS EN 60335-1 : 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| CEI EN 50121-5 : 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| BS EN 60934 : 2001 | CIRCUIT-BREAKERS FOR EQUIPMENT (CBE) |
| I.S. EN 50270:2015 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| I.S. EN 61439-1:2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011) |
| I.S. EN 62115:2006 | ELECTRIC TOYS - SAFETY(IEC 62115:2003 (MOD) + A1:2004 (EQV)) |
| UNE-EN 61481-2:2015 | Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| I.S. EN 61786-1:2014 | MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS |
| I.S. EN 61326:1998 | |
| EN 50121-4:2016 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
| PREN 14846 : DRAFT 2015 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| DD ENV 14236:2002 | Ultrasonic domestic gas meters |
| PREN 1434-4 : DRAFT 2014 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| I.S. EN 61098:2007 | RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES |
| I.S. EN 55014-2:2015 | ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - PRODUCT FAMILY STANDARD |
| UNE-EN 60669-2-5:2017 | Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
| I.S. EN 61036:1997 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| CLC/TR 50450:2006 | Resistibility requirements for equipment having (a) telecommunication port(s) |
| PREN 50121-3-2 : DRAFT 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| VDE 0557-3 : 2001 COR 1 2004 | LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: PRODUCT EMC STANDARD |
| EN IEC 61643-331:2018 | Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal oxide varistors (MOV) |
| EN 300 386-2 : 1.1.3 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TELECOMMUNICATION NETWORK EQUIPMENT; ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS; PRODUCT FAMILY STANDARD |
| I.S. EN 61019-1:2005 | SURFACE ACOUSTIC WAVE (SAW) RESONATORS - PART 1: GENERIC SPECIFICATION |
| CEI EN 50491-5-2 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT |
| CEI EN 60308 : 2005 | HYDRAULIC TURBINES - TESTING OF CONTROL SYSTEMS |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| I.S. EN 60601-1-2:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| I.S. EN 62026-3:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 3: DEVICENET |
| I.S. EN 61672-2:2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| I.S. EN 50463:2007 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
| I.S. EN 50121-4:2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| I.S. EN 14846:2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| I.S. EN 62041:2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS |
| IEC 61960-2:2001 | Secondary lithium cells and batteries for portable applications - Part 2: Secondary lithium batteries |
| I.S. EN 61672-1:2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 1: SPECIFICATIONS |
| I.S. EN 60947-2:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS |
| DIN EN 13544-1:2009-12 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| DIN EN 14143:2013-10 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| DIN EN 13718-1:2014-12 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| BS EN ISO 21649:2009 | Needle-free injectors for medical use. Requirements and test methods |
| UNE-EN 60947-4-1:2011 | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| UNE-EN 45501:2016 | Metrological aspects of non-automatic weighing instruments |
| BS EN 14154-2 : 2005 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| DIN EN 12952-11:2007-09 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| ISO 21649:2006 | Needle-free injectors for medical use — Requirements and test methods |
| BS EN 809 : 1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 12414:1999 | Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements |
| CEI EN 62026-2 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) |
| EN 1300:2013 | Secure storage units - Classification for high security locks according to their resistance to unauthorized opening |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNE-EN 14154-3:2005 | Water meters - Part 3 : Test methods and equipment |
| EN 809:1998+A1:2009 | Pumps and pump units for liquids - Common safety requirements |
| UNE-EN 14154-2:2005 | Water meters - Part 2 : Installation and conditions of use |
| UNE-EN 12895:2016 | Industrial trucks - Electromagnetic compatibility |
| I.S. EN 12414:2000 | VEHICLE PARKING CONTROL EQUIPMENT - PAY AND DISPLAY TICKET MACHINE - TECHNICAL AND FUNCTIONAL REQUIREMENTS |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| EN 300 386 : 1.6.1 | TELECOMMUNICATION NETWORK EQUIPMENT; ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF THE DIRECTIVE 2014/30/EU |
| EN 301 843-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR MARINE RADIO EQUIPMENT AND SERVICES; HARMONISED STANDARD FOR ELECTROMAGNETIC COMPATIBILITY; PART 1: COMMON TECHNICAL REQUIREMENTS |
| I.S. EN 13544-1:2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| EN 60601-2-4:2011 | Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators |
| UNE-EN 60947-3:2009 | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| UNI EN 12952-11 : 2007 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNI EN 809 : 2009 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNI EN 14143 : 2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| EN 50199 : 95 AC 98 | |
| UNI EN 12645 : 2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| UNI EN 1643 : 2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| EN 60255-22-2:2008 | Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 12016 : 2013 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| UNI EN 14154-3 : 2011 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| UNI EN 14154-2 : 2011 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| UNI EN 1760-2 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| UNI EN 12953-9 : 2007 | SHELL BOILERS - PART 9: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNI EN 13544-1 : 2009 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| UNI EN 298 : 2012 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| UNI EN 1760-1 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| UNI EN 1760-3 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| CEI EN 61298-3 : 2011 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES |
| CEI EN 61076-4-103 : 2001 | CONNECTORS FOR USE IN D.C. LOW - FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2,5 MM |
| I.S. EN 61582:2006 | RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT |
| BS EN 60669-2-5:2016 | Switches for household and similar fixed electrical installations Particular requirements. Switches and related accessories for use in home and building electronic systems (HBES) |
| CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
| NF ETS 300673 : 1998 | |
| CEI EN 62026-1 : 2008 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 61131-9:2013 | Programmable controllers Single-drop digital communication interface for small sensors and actuators (SDCI) |
| CEI EN 62244 : 2012 | RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS |
| PREN 50121-4 : DRAFT 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| BS EN 60255-22-2:2008 | Measuring relays and protection equipment Electrical disturbance tests. Electrostatic discharge tests |
| CEI EN 61582 : 2007 | RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT |
| 11/30245183 DC : 0 | BS EN 62115 PRAB - ELECTRIC TOYS - SAFETY |
| EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| BS EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results |
| BS EN 60044-7:2000 | Instrument transformers Electronic voltage transformers |
| 13/30260741 DC : 0 | BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| CEI EN 60325 : 2005 | RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS |
| BS EN 50370-2:2003 | Electromagnetic compatibility (EMC). Product family standard for machine tools Immunity |
| BS EN 55103-2:2009 | Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use Immunity |
| 14/30291768 DC : 0 | BS EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| 13/30252777 DC : 0 | BS EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
| BS EN 61019-1:2005 | Surface acoustic wave (SAW) resonators Generic specification |
| BS EN 62920:2017 | Photovoltaic power generating systems. EMC requirements and test methods for power conversion equipment |
| S.R. CLC/TS 62603-1:2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
| 18/30368636 DC : 0 | BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| BS EN 60601-2-24:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
| CEI EN 62041 : 2012 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS |
| CEI EN 60601-2-4 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CARDIAC DEFIBRILLATORS |
| CEI EN 61513 : 2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS |
| 16/30340734 DC : 0 | BS EN 50121-3-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| 11/30247615 DC : 0 | BS EN 16314 - GAS METERS - ADDITIONAL FUNCTIONALITIES |
| BS EN 62387-1:2012 | Radiation protection instrumentation. Passive integrating dosimetry systems for environmental and personal monitoring General characteristics and performance requirements |
| BS EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use. EMC requirements General requirements |
| BS EN 62310-2:2007 | Static transfer systems (STS) Electromagnetic compatibility (EMC) requirements |
| BS EN 50557:2011 | Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
| 04/30113789 DC : DRAFT MAY 2004 | EN 60846 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION |
| CEI EN 61098 : 2008 | RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES |
| I.S. EN 61260-1:2014 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS |
| BS EN 12405-2:2012 | Gas meters. Conversion devices Energy conversion |
| BS EN 60580:2000 | Dose area product meters |
| BS EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements |
| BS EN 60601-1-2:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests |
| BS EN 15964:2011 | Breath alcohol test devices other than single use devices. Requirements and test methods |
| BS EN 62041:2010 | Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements |
| 05/30137922 DC : DRAFT AUG 2005 | ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| BS EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use. EMC requirements Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment |
| NF ETS 300717 : 2000 | |
| CEI EN 62083 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS |
| CEI EN 50370-2 : 2004 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 2: IMMUNITY |
| 04/19986707 DC : 0 | BS EN 1804-4 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 4: ELECTRO-HYDRAULIC CONTROL SYSTEMS |
| BS EN 61800-5-2:2017 | Adjustable speed electrical power drive systems Safety requirements. Functional |
| UNE-EN 50130-4:2011 | Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
| BS EN 61672-1:2013 | Electroacoustics. Sound level meters Specifications |
| BS EN 50121-5:2017 | Railway applications. Electromagnetic compatibility Emission and immunity of fixed power supply installations and apparatus |
| BS EN 61260:1996 | Electroacoustics. Octave-band and fractional-octave-band filters |
| 03/118296 DC : 0 | BS EN 14846 - BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 15964:2012 | Breath alcohol test devices other than single use devices - Requirements and test methods |
| UNE-EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| BS EN 50263:2000 | Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment |
| BS EN 60601-2-4:2011 | Medical electrical equipment Particular requirements for the basic safety and essential performance of cardiac defibrillators |
| BS EN 61326:1998 | Electrical equipment for measurement, control and laboratory use. EMC requirements |
| DIN EN 50263 : 2000 | |
| EN 50121-3-2:2016 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| CEI EN 61000-6-1 : 2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| CEI EN 61800-5-2 : 2009 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL |
| CEI EN 61850-3 : 2014 | COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS |
| BS EN 61298-3:2008 | Process measurement and control devices. General methods and procedures for evaluating performance Tests for the effects of influence quantities |
| EN 62488-2:2017 | Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC |
| EN 63024:2018 | Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses |
| CEI EN 55035 : 2018 | ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS |
| I.S. EN 62310-2:2007 | STATIC TRANSFER SYSTEMS (STS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| CEI EN 50463-2 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| BS EN 50470-1 : 2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| BS EN 55014-2:2015 | Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus Immunity. Product family standard |
| I.S. EN 50370-2:2003 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 2: IMMUNITY |
| PREN 298 : DRAFT 2010 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| CEI UNI EN 12414 : 2001 | VEHICLE PARKING CONTROL EQUIPMENT - PAY AND DISPLAY TICKET MACHINE - TECHNICAL AND FUNCTIONAL REQUIREMENTS |
| CEI EN 61674 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING |
| DIN EN 1434-4:2016-02 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| 15/30298547 DC : 0 | BS EN 14846 - BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 60761-1:2004 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60669-2-1:2004 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES |
| CEI 13-26 : 1999 | WATT-HOUR METERS AND POWER LIMITERS FOR LOW-VOLTAGE NETWORKS (INTEGRATED UNITS) PERMITTED OR NOT FOR PROCESSING AND REMOTE MANAGEMENT OF DATA |
| GOST EN 1760-1 : 2004 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1 - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| CEI EN 62310-2 : 2007 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| CEI EN 61960-3 : 1ED 2017 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 3: PRISMATIC AND CYLINDRICAL LITHIUM SECONDARY CELLS, AND BATTERIES MADE FROM THEM |
| I.S. EN 50412-2-1:2009 | POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
| ONORM EN 14236 : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| EN 62026-2:2013 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) |
| I.S. EN 61000-4-1:2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES |
| I.S. EN 61850-3:2014 | COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61960:2011 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS |
| I.S. EN 61131-2:2007 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| I.S. EN 50083-2:2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| I.S. EN 61069-1:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 60580:2000 | MEDICAL ELECTRICAL EQUIPMENT - DOSE AREA PRODUCT METERS |
| I.S. EN 60947-3:2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS |
| I.S. EN 62040-2:2006 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| I.S. EN 60439-1:2000 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| I.S. EN 1300:2013 | SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| EN 50325-1:2002 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements |
| EN 61260-2:2016/A1:2017 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS (IEC 61260-2:2016/A1:2017) |
| DIN EN 809:2012-10 | Pumps and pump units for liquids - Common safety requirements |
| DIN EN 61158-2:2015-02 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (IEC 61158-2:2014) |
| DIN EN 45501:2016-03 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| DIN EN 298:2012-11 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| 95/214868 DC : 0 | PREN 50178 - ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| BS EN 60947-2:2017+A1:2020 | Low-voltage switchgear and controlgear Circuit-breakers |
| EN 60580:2000 | Medical electrical equipment - Dose area product meters |
| BS EN 13544-1 : 2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| BS EN 60204-31:2013 | Safety of machinery. Electrical equipment of machines Particular safety and EMC requirements for sewing machines, units and systems |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| UNE-EN 61000-6-5:2016 | Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment |
| BS EN 12952-11:2007 | Water-tube boilers and auxiliary installations Requirements for limiting devices of the boiler and accessories |
| EN 13718-1:2014 | Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances |
| BS EN 12953-9:2007 | Shell boilers Requirements for limiting devices of the boiler and accessories |
| EN 60947-5-2:2007/A1:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007/A1:2012) |
| UNE-EN 12016:2014 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| I.S. EN 13718-1:2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| UNE-EN 50065-2-3:2004 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
| BS EN 12016:2013 | Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity |
| BS EN 230:2005 | Automatic burner control systems for oil burners |
| BS EN 1760-2 : 2001 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| BS EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances. Valve proving systems for automatic shut-off valves |
| UNE-EN 62115:2006 | Electric toys - Safety (IEC 62115:2003 + A1:2004, modified) |
| BS EN 60439-1:1999 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
| BS EN 14143:2013 | Respiratory equipment. Self-contained re-breathing diving apparatus |
| BS EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| BS EN 12405:2002 | Gas meters. Gas-volume electronic conversion devices |
| UNE-EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| UNE-EN 62083:2010 | Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems |
| BS EN 60669-2-1 : 2004 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES |
| UNE-EN 60335-1:2012 | Household and similar electrical appliances - Safety - Part 1: General requirements |
| BS EN 1760-1 : 1998 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| UNE-EN 60204-31:2013 | Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
| UNE-EN 55014-2:2015 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
| UNE-EN 14143:2014 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 61204-3:2000 | Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) |
| EN 60862-1:2015 | Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification |
| EN 61526:2013 | Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters |
| EN 13637:2015 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| EN 14154-2:2005+A2:2011 | Water meters - Part 2: Installation and conditions of use |
| EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| EN 14143:2013 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 15964:2011 | Breath alcohol test devices other than single use devices - Requirements and test methods |
| EN ISO 21649:2009 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN 14846:2008 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| EN 16864:2017 | Building hardware - Mechatronic padlocks - Requirements and test methods |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 1760-3:2004+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
| EN 16314:2013 | Gas meters - Additional functionalities |
| EN 14154-3:2005+A2:2011 | Water meters - Part 3: Test methods and equipment |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
| EN 230:2005 | Automatic burner control systems for oil burners |
| EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| BS EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| I.S. EN 50090-2-2:1998 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| 04/30116608 DC : DRAFT JUL 2004 | EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS |
| I.S. EN 55020:2007 | SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 20:2006) |
| 03/102518 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EMERGENCY EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Requirements for measuring instruments |
| TR 103 400 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPACT OF CENELEC EN 55035 ON ETSI EMC STANDARDS |
| I.S. EN 60255-22-2:2008 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 22-2: ELECTRICAL DISTURBANCE TESTS - ELECTROSTATIC DISCHARGE TESTS |
| DIN V ENV 50121-3-2 : 1997 | BAHNANWENDUNGEN - ELEKTROMAGNETISCHE VERTRAEGLICHKEIT - SCHIENENFAHRZEUGE - GERAETE |
| CEI EN 61260-1 : 2017 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS |
| EN 62533:2016 | Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material |
| BS EN 60947-6-2:2003 | Low-voltage switchgear and controlgear Multiple function equipment. Control and protective switching devices (or equipment) (CPS) |
| BS EN 61960-3:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications Prismatic and cylindrical lithium secondary cells, and batteries made from them |
| BS EN 62488-2:2017 | Power line communication systems for power utility applications Analogue power line carrier terminals or APLC |
| 13/30274904 DC : 0 | BS EN 14154-4 - WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| UNE-EN 16314:2014 | Gas meters - Additional functionalities |
| EN 61851-22:2002 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| CEI CLC/TR 50450 : 2006 | RESISTIBILITY REQUIREMENTS FOR EQUIPMENT HAVING (A) TELECOMMUNICATION PORT(S) |
| EN IEC 60942:2018 | Electroacoustics - Sound calibrators |
| PREN 12016 : DRAFT 2018 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| I.S. EN 230:2005 | AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 15/30321305 DC : 0 | BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| I.S. EN 60942:2003 | ELECTROACOUSTICS - SOUND CALIBRATORS |
| BS EN 61850-3:2014 | Communication networks and systems for power utility automation General requirements |
| BS EN 50065-2-1:2003 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments |
| BS EN 60947-8:2003 | Low-voltage switchgear and controlgear Control units for built-in thermal protection (PTC) for rotating electrical machines |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| 10/30213584 DC : 0 | BS EN 14143 - RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| CEI EN 50325-3 : 2002 | INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 3: SMART DISTRIBUTED SYSTEM (SDS) |
| BS EN 61000-6-5:2015 | Electromagnetic compatibility (EMC) Generic standards. Immunity for equipment used in power station and substation environment |
| 09/30200143 DC : 0 | BS EN 62080 - SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| DIN EN 16314:2013-09 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| BS EN 50491-5-1:2010 | General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements, conditions and test set-up |
| I.S. EN 50065-2-3:2003 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS |
| BS EN 60846:2004 | Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation |
| I.S. EN 50121-3-2:2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| 16/30299842 DC : 0 | BS EN 50518 - MONITORING AND ALARM RECEIVING CENTRE |
| 15/30298556 DC : DRAFT FEB 2015 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 61547:2009 | Equipment for general lighting purposes. EMC immunity requirements |
| DIN EN 60546-1:2011-06 | CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE |
| BS EN 60947-5-9:2007 | Low-voltage switchgear and controlgear Control circuit devices and switching elements. Flow rate switches |
| BS EN 62135-2:2015 | Resistance welding equipment Electromagnetic compatibility (EMC) requirements |
| I.S. EN 60861:2008 | EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS |
| BS EN 60761-1:2004 | Equipment for continuous monitoring radioactivity in gaseous effluents General requirements |
| CEI EN 62052-11 : 2003 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT |
| UNE-EN 12405-2:2013 | Gas meters - Conversion devices - Part 2: Energy conversion |
| NF EN 50491-5-1 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| 03/306642 DC : DRAFT APR 2003 | EN 230 - AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| CSA C900.4 : 2013 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| CEI EN 50412-2-1 : 2006 | POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
| BS EN 61960-2:2002 | Secondary lithium cells and batteries for portable applications Secondary lithium batteries |
| BS EN 62040-2:2006 | Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements |
| DIN EN 13637:2015-12 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 60947-6-1:2006 | Low-voltage switchgear and controlgear -- Part 6-1: Multiple function equipment - Transfer switching equipment (IEC 60947-6-1:2005) |
| I.S. EN 62604-1:2015 | SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| UNI EN 16314 : 2013 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| I.S. EN 13637:2015 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 62080 : 2009 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
| CEI EN 50491-5-1 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| I.S. EN 61960-3:2017 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 3: PRISMATIC AND CYLINDRICAL LITHIUM SECONDARY CELLS, AND BATTERIES MADE FROM THEM |
| EN 55035:2017 | Electromagnetic compatibility of multimedia equipment - Immunity requirements |
| I.S. EN 60934:2001 | CIRCUIT BREAKERS FOR EQUIPMENT (CBE) (IEC 60934:2000 (EQV)) |
| I.S. EN 61131-6:2012 | PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV)) |
| I.S. EN 60947-1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. EN 55103-2:2009 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIO-VISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY |
| NF ETS 300 329 : 1999 | |
| EN 50470-1:2006 | Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
| I.S. EN 61298-3:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES |
| I.S. EN 61260-2:2016 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS |
| I.S. EN 61131-9:2013 | PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI) |
| I.S. EN 15684:2012 | BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
| NF EN 300339 : 2000 | |
| I.S. EN 60862-1:2015 | SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| UNE-EN 1300:2014 | Secure storage units - Classification for high security locks according to their resistance to unauthorized opening |
| BS EN 62052-11 : 2003 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003) |
| I.S. EN 50518-1:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| I.S. EN 60947-4-1:2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009 (EQV)) |
| I.S. EN 62920:2017 | PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT |
| I.S. EN 55024:2010 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
| BS EN 60947-6-1:2005 | Low-voltage switchgear and controlgear Multiple function equipment. Transfer switching equipment |
| PREN 50270 : DRAFT 2013 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| I.S. EN 60846:2004 | RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION |
| I.S. EN 60255-26:2013 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS (IEC 60255-26:2013 (EQV)) |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN 61481-1:2014 | LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| UNE-EN 62041:2011 | Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements |
| NF EN 50130-4 : 2014 AMD 1 2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| BS EN 61812-1:2011 | Time relays for industrial and residential use Requirements and tests |
| UNE-EN 50121-4:2017 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
| I.S. EN 62533:2016 | RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR PHOTON DETECTION OF RADIOACTIVE MATERIAL |
| EN 62920:2017 | Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment |
| I.S. EN 61513:2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS (IEC 61513:2011 (EQV)) |
| 17/30356731 DC : 0 | BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| DIN EN 16864:2015-06 (Draft) | BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| CEI EN 55103-2 : 2010 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIOVISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY |
| UNE-EN 1434-4:2016 | Heat meters - Part 4: Pattern approval tests |
| I.S. EN 50293:2012 | ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY |
| I.S. EN 55035:2017 | ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS |
| I.S. EN 15964:2011 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| BS EN 809:1998+A1:2009 | Pumps and pump units for liquids. Common safety requirements |
| I.S. EN 61000-6-2:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005 (EQV)) |
| I.S. EN 60947-5-9:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES |
| I.S. EN 61800-5-2:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL |
| I.S. EN 50240:2006 | |
| I.S. EN 61496-1:2013 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS |
| I.S. EN 60268-4:2014 | SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES |
| I.S. EN 61526:2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS (IEC 61526:2010 (MOD)) |
| I.S. EN 50491-5-1:2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| I.S. EN 61676:2003 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY |
| EN 61800-3 : 2004 AMD 1 2012 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011) |
| DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| DIN EN 1760-2:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| DIN EN 1760-1:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| UNE-EN 61439-1:2012 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| BS EN 61158-2:2014 | Industrial communication networks. Fieldbus specifications Physical layer specification and service definition |
| BS EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies General rules |
| BS EN 50090-2-2 : 1997 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| EN 50065-2-1 : 2003 AMD 1 2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS |
| DIN EN 14154-3:2011-06 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| EN 61676:2002/A1:2009 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY |
| EN 50065-2-2:2003/A1:2005/corrigendum Oct. 2006 | SIGNALING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS |
| EN 50295:1999 | Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i) |
| EN 12016:2013 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| EN 61513:2013 | Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
| EN 61036:1996/A1:2000 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| EN 60934:2001/A2:2013 | CIRCUIT BREAKERS FOR EQUIPMENT (CBE) (IEC 60934:2000/A2:2013) |
| EN 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| EN 61786-1:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
| DIN EN 16864:2017-11 | BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| EN 55104 : 1995 | ELECTROMAGNETIC COMPATIBILITY - IMMUNITY REQUIREMENTS FOR HOUSEHOLD APPLIANCES, TOOLS AND SIMILAR APPARATUS - PRODUCT FAMILY STANDARD |
| EN 61757-1 : 2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012) |
| EN 61069-1:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 60601-2-24:2015 | Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
| EN 60846-1:2014 | Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 62083:2009 | MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS |
| EN 61076-3-112 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-112: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR RECTANGULAR CONNECTORS WITH FOUR CONTACTS FOR HIGH PERFORMANCE SERIAL BUS FOR CONSUMER AUDIO/VIDEO EQUIPMENT |
| EN 61000-4-1:2007 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
| EN 61481-2:2014 | Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| EN 50065-2-3 : 2003 AMD 1 2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148.5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS |
| EN 55103-2:2009 | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
| EN 61326:1997/A3:2003 | |
| EN 60325:2004 | Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors |
| EN 55024 : 2010 AMD 1 2015 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 24:2010/A1:2015) |
| EN 62534:2015 | Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material |
| EN 50090-2-2:1996/A2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| EN 62343-2:2014 | Dynamic modules - Part 2: Reliability qualification |
| EN 62052-21:2004/A1:2017/AC:2018-04 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004/A1:2016/COR1:2018) |
| EN 61543:1995/A2:2006 | RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY |
| EN 62041:2010 | Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements |
| EN 62115:2005/A12:2015 | ELECTRIC TOYS - SAFETY (IEC 62115:2003 + A1:2004, MODIFIED) |
| EN 60204-31:2013 | Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
| EN 12405-3:2015 | Gas meters - Conversion devices - Part 3: Flow computer |
| EN 62052-11:2003/A1:2017/AC:2018-04 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003/A1:2016/COR1:2018) |
| EN 12953-9:2007 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| EN 60368-1:2000/A1:2004 | PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| EN 60546-1:2010 | Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance |
| EN 60846:2004 | Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation |
| EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| EN 61672-2:2013/A1:2017 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017) |
| EN 62575-1:2016 | Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification |
| EN 50263:1999 | Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment |
| EN 61674:2013 | Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| EN 50491-5-2:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
| EN 62135-2:2015 | Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
| EN 60861:2008 | Equipment for monitoring of radionuclides in liquid effluents and surface waters |
| EN 60268-4:2014 | Sound system equipment - Part 4: Microphones |
| EN 62040-2:2006/corrigendum:2006 | |
| EN 50370-2:2003 | Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity |
| EN 50491-5-1:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up |
| EN 50557:2011 | Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
| EN 50240:2004/corrigendum:2005 | |
| EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 45501 : 2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| EN 50463:2007 | Railway applications - Energy measurement on board trains |
| EN 50270:2015 | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| EN 60255-26:2013/AC:2013 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS |
| EN 61098:2007 | Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies |
| EN 61812-1:2011 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| EN 50325-2:2000 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 2: DeviceNet |
| EN 60947-5-9:2007 | Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches |
| EN 60974-10:2014/A1:2015 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 60974-10:2014/A1:2015) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| EN 60761-1:2004 | Equipment for continuous monitoring radioactivity in gaseous effluents - Part 1: General requirements |
| EN 62026-1:2007 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules |
| EN 61131-9 : 2013 | Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) |
| UNE-EN 809:1999 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 62026-7:2013 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet |
| VDS 2119 : 2003 | ANCILLARY CONTROL EQUIPMENT (ACE) - REQUIREMENTS |
| VDS 2117 : 2002 | INFRARED LIGHT BEAMS - REQUIREMENTS |
| UNE-EN 13544-1:2007 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| IEC GUIDE 107:2014 | Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.