EN 60780-323:2017
Current
The latest, up-to-date edition.
Nuclear facilities - Electrical equipment important to safety - Qualification
10-13-2017
FOREWORD
INTRODUCTION
1 Scope and object
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principles of equipment qualification
6 Qualification methods
7 Qualification program
8 Documentation
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC/IEEE 60780-323:2016 describes the basic requirements for qualifying electrical equipment important to safety and interfaces (electrical and mechanical) that are to be used in nuclear facilities. The principles, methods, and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. The qualification requirements in this standard, when met, demonstrate and document the ability of equipment to perform safety function(s) under applicable service conditions, including design basis events and certain design extension conditions, and reduce the risk of environmentally induced common-cause equipment failure. This new edition includes the following main changes with respect to the previous edition IEC 60780:1998 harmonizes in a unique standard qualification practices formerly given by IEC 60780:1998 and IEEE 323:2003 on initial qualification, takes into account the need to reassess and extend the qualified life of electrical equipment regarding projects to extend the operating life of nuclear facilities.
| Committee |
CLC/TC 45AX
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| CEI EN 60780-323:2019 | Identical |
| UNE-EN 60780-323:2017 | Identical |
| NEN EN IEC/IEEE 60780-323 : 2017 | Identical |
| IEC/IEEE 60780-323:2016 | Identical |
| NF EN 60780-323 : 2017 | Identical |
| VDE 0491-80 : 2018-03 | Identical |
| DIN EN 60780-323 : 2018-03 | Identical |
| PNE-FprEN 60780-323:2017 | Identical |
| PN EN 60780-323 : 2017 | Identical |
| BS EN 60780-323:2017 | Identical |
| I.S. EN 60780-323:2017 | Identical |
| CEI EN 61513 : 2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS |
| IEEE 420-2013 REDLINE | IEEE Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations |
| IEEE 628-2011 | IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations |
| IEEE 382-2006 | IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations |
| IEEE 99-2007 REDLINE | IEEE Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical Equipment |
| IEC 60811-412:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb |
| IEC 62342:2007 | Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEEE 383-2015 | IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities |
| IEC 60068-2-57:2013 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method |
| IEC 62003:2009 | Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing |
| IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
| IEC 60980:1989 | Recommended practices for seismic qualification of electrical equipment of the safety system for nuclear generating stations |
| IEEE 334 : 2007 | QUALIFYING CONTINUOUS DUTY CLASS 1E MOTORS FOR NUCLEAR POWER GENERATING STATIONS |
| IEEE 344-2013 | IEEE Standard for Seismic Qualification of Equipment for Nuclear Power Generating Stations |
| IEC 60216-2:2005 | Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria |
| IEC 60068-3-3:1991 | Environmental testing - Part 3-3: Guidance - Seismic test methods for equipments |
| IEEE 535-2013 | IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations |
| IEC 60544-2:2012 | Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEEE 101 : 1987 | GUIDE FOR THE STATISTICAL ANALYSIS OF THERMAL LIFE TEST DATA |
| IEEE 1205-2014 | IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities |
| IEEE 98-2002 | IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials |
| IEEE 638-2013 | IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations |
| IEEE 572-2006 | IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| IEEE 650-2006 | IEEE Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations |
| IEEE 317-2013 REDLINE | IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations |
| IEEE 7-4.3.2-2016 | IEEE Standard Criteria for Programmable Digital Devices in Safety Systems of Nuclear Power Generating Stations |
| IEEE 603-2009 REDLINE | IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations |
| IEEE 649-2006 | IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.