EN 6037:2015
Current
The latest, up-to-date edition.
Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength
11-25-2015
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle of the method
5 Designation of the method
6 Apparatus
7 Test specimen
8 Procedure
9 Presentation of the results
10 Test report
This European Standard defines the procedure to be used to determine the bearing strength of fibre composites with multidirectional reinforcement. This standard is applicable to composite laminates manufactured from unidirectional tape or woven fabric reinforcement.This standard does not give any directions necessary to meet health and safety requirements. It is the responsibility of the user of this standard to consult and establish appropriate health and safety precautions.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 6037. (12/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 6037 : 2015 | Identical |
| SN EN 6037 : 2016 | Identical |
| UNI EN 6037 : 2016 | Identical |
| DIN EN 6037:2016-02 | Identical |
| NEN EN 6037 : 2017 | Identical |
| BS EN 6037:2015 | Identical |
| NBN EN 6037 : 2015 | Identical |
| NF EN 6037 : 2017 | Identical |
| I.S. EN 6037:2015 | Identical |
| PN EN 6037 : 2016 | Identical |
| UNE-EN 6037:2015 | Identical |
| PREN 2833-2 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 2: GLASS FABRIC/EPOXY RESIN PREIMPREGNATES CURING AT UP 125 DEGREES C FOR CONTINUOUS USE UP TO 80 DEGREES C |
| SAE AMS 2980/1 : 2014 | CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS |
| SAE AMS3970/1A | CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 1 - GENERAL REQUIREMENTS |
| SAE AMS 3970/6 : 2011 | CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 6 - MATERIAL SPECIFICATION: CARBON FIBER FABRIC REINFORCED EPOXY PREPREG FOR REPAIR, PLAIN WEAVE FABRIC, 193 G/M[2], ADHESIVE FILM FOR REPAIR AND NON-STRUCTURAL GLASS FIBER FABRIC REINFORCED EPOXY PREPREG, 105 G/M[2] |
| XP PREN 2833-2 : 1995 XP | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 2: GLASS FABRIC/EPOXY RESIN PREIMPREGNATES CURING AT UPTO 125 DEGREES C FOR CONTINUOUS USE UPTO 80 DEGREES C |
| 95/714421 DC : 0 | PREN 2833-3 - AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 3: GLASS FABRIC/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 180 DEGREE C FOR CONTINUOUS USE UP TO 120 DEGREE C |
| 95/714422 DC : 0 | PREN 2833-4 - AEROSPACE SERIES - GLASS FIBER THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 4: UNIDIRECTIONAL GLASS/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 125 DEGREE C FOR CONTINUOUS USE UP TO 80 DEGREE C |
| PREN 2833-4 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 4: UNIDIRECTIONAL GLASS/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 125 DEGREES C FOR CONTINUOUS USE UP TO 80 DEGREES C |
| EN 2565:2013 | Aerospace series - Preparation of carbon fibre reinforced resin panels for test purposes |
| PREN 2823 : 200P2 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - DETERMINATION OF THE EFFECT OF EXPOSURE TO HUMID ATMOSPHERE ON PHYSICAL AND MECHANICAL CHARACTERISTICS |
| EN 2743:2001 | Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials |
| EN 2374:1991 | Aerospace series - Glass fibre reinforced mouldings and sandwich composites - Production of test panels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.