• Shopping Cart
    There are no items in your cart

EN 60112 : 2003 AMD 1 2009

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS

Superseded date

12-15-2020

Superseded by

EN IEC 60112:2020

Published date

01-12-2013

Sorry this product is not available in your region.

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Test specimen
6 Test specimen conditioning
   6.1 Environmental conditioning
   6.2 Test specimen surface state
7 Test apparatus
   7.1 Electrodes
   7.2 Test circuit
   7.3 Test solutions
   7.4 Dropping device
   7.5 Test specimen support platform
   7.6 Electrode assembly installation
8 Basic test procedure
   8.1 General
   8.2 Preparation
   8.3 Test procedure
9 Determination of erosion
10 Determination of proof tracking index (PTI)
   10.1 Procedure
   10.2 Report
11 Determination of comparative tracking index (CTI)
   11.1 General
   11.2 Determination of the 100 drop point
   11.3 Determination of the maximum 50 drop withstand voltage
   11.4 Report
Annex A (informative) List of factors that should be considered by
        product committees
Annex B (informative) Electrode material selection
Annex ZA (normative) Normative references to international
         publications with their corresponding European publications
Bibliography

Describes the method of test for the determination of the proof and comparative tracking indices of solid insulating materials on pieces taken from parts of equipment and on plaques of materials using alternating voltages.

Committee
SR 112
DevelopmentNote
Supersedes HD 214 (06/2003)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Superseded
SupersededBy

I.S. EN 60335-1:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 50124-1:2017 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment
UNE-EN 62752:2017 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
I.S. EN 61995-1:2008 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
BS EN 60745-1 : 2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
12/30258455 DC : 0 FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
I.S. EN 61810-1:2015 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
UNE-EN 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
11/30233201 DC : 0 BS EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
I.S. EN 60252-1:2011 AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION (IEC 60252-1:2010 (EQV))
BS EN 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
EN IEC 61730-1:2018/AC:2018-06 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016)
CEI EN 61534-1 : 2012 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 61287-1:2014 Railway applications. Power converters installed on board rolling stock Characteristics and test methods
UNE-EN 60252-1:2011 AC motor capacitors -- Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation
UNE-EN 61534-1:2011 Powertrack systems -- Part 1: General requirements
CEI EN 50557 : 2012 REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES
EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
DIN EN 81-31:2010-08 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
I.S. EN 62109-1:2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
CEI EN 61995-1 : 2009 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 60400:2017 LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS
CEI EN 61095 : 2010 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
CEI EN 61643-11 : 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
BS EN 61242 : 1998 ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES
BS EN 60320-2-4 : 2006 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 2-4: COUPLERS DEPENDENT ON APPLIANCE WEIGHT FOR ENGAGEMENT
I.S. EN 60838-1:2017 MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 60838-1 : 2017 MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60838-1:2016)
BS EN 50539-11 : 2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
BS EN 61730-1 : 2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. EN 61347-1:2015 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
BS EN 60252-1 : 2011 AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION
I.S. EN IEC 61730-1:2018 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. EN 60252-2:2011 AC MOTOR CAPACITORS - PART 2: MOTOR START CAPACITORS (IEC 60252-2:2010 (EQV))
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN IEC 60079-7:2015/A1:2018 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
EN 61535:2009/A1:2013 INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS (IEC 61535:2009/A1:2012)
DIN EN 14598-3:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
DIN EN 14598-2:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
BS EN 61558-1 : 2005 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 61535 : 2009 INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS
UNE-EN 61812-1:2012 Time relays for industrial and residential use - Part 1: Requirements and tests
BS EN 61347-1:2015 Lamp controlgear General and safety requirements
BS EN 62477-1 : 2012 SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012)
BS EN 60893-2:2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test
EN 61347-1:2015 Lamp controlgear - Part 1: General and safety requirements
EN 61800-5-1:2007/A1:2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY (IEC 61800-5-1:2007/A1:2016)
EN 50502:2015 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
EN 61243-3:2014/AC:2015 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
EN 61184:2017 Bayonet lampholders
EN 61558-1:2005/A1:2009 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
EN 60691:2016 Thermal-links - Requirements and application guide
EN 50539-11 : 2013 AMD 1 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 60252-1 : 2011 AMD 1 2013 AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION (IEC 60252-1:2010/A1:2013)
EN 60950-1:2006/A2:2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
EN 60893-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
EN 60079-2:2014/AC:2015 EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)
I.S. EN 60079-2:2014 EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
15/30304603 DC : 0 BS EN 50066 - MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
BS EN 81-50:2014 Safety rules for the construction and installation of lifts. Examinations and tests Design rules, calculations, examinations and tests of lift components
CEI EN 60664-4 : 2006 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 4: CONSIDERATION OF HIGH-FREQUENCY VOLTAGE STRESS
I.S. EN 61730-1:2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. HD 60269-2:2013 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K (IEC 60269-2:2013 (MOD))
15/30298489 DC : 0 BS EN 50124-1 - RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT
PREN 61008-1 : DRAFT 2011 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES
BS EN 50502:2015 Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems
UNE-EN 61184:2011 Bayonet lampholders
BS EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
BS HD 60269-2:2013 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K
BS EN 60747-5-5 : 2011 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
I.S. EN 61812-1:2011 TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS
CEI EN 60664-1 : 2008 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
BS EN 50065-4-7:2005 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Portable low voltage decoupling filters. Safety requirements
I.S. EN IEC 62613-1:2018 PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) - PART 1: GENERAL REQUIREMENTS
PREN 50124-1 : DRAFT 2015 RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT
PREN 61009-1 : DRAFT 2011 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
CEI EN 61810-1 : 2016 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
EN 61242:1997/A13:2017 ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES
I.S. EN 50550:2011 POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
BS EN 61243-3:2014 Live working. Voltage detectors Two-pole low-voltage type
I.S. EN 61534-1:2011 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 62310-1:2005 STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
I.S. EN 50539-11:2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
I.S. HD 60269-2-1:2005 LOW-VOLTAGE FUSES - PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - SECTIONS 1 TO 6: EXAMPLES OF TYPES OF STANDARDIZED FUSES
BS EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles General requirements
EN 50124-1:2017 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment
CEI EN 62196-1 : 2015 PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
CEI EN 60079-15 : 2012 EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
I.S. EN 50124-1:2017 RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT
I.S. EN 61800-5-1:2007 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY
UNE-EN 62196-1:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
BS EN 14598-2:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements
EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
I.S. EN 60893-2:2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
I.S. EN 60079-11:2012 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
BS 88-2(2013) : 2013 COR 2014 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
BS 88-2:2007 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I
BS 88-2(2010) : 2010 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO J
UNE-EN 50557:2012 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
I.S. EN 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
EN 61810-1:2015/AC:2018-04 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018)
I.S. EN 61009-1:2012 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
BS EN 60079-7 : 2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
CEI EN 62368-1 : 2016 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
UNE-HD 60269-2:2014 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
BS EN 62310-1:2005 Static transfer systems (STS) General and safety requirements
UNE-EN 61008-1:2013 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
BS EN 60695-1-20:2016 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance
BS EN 60065 : 2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
EN IEC 62613-1:2018 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements
CEI 32-12 : 2014 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
UNI EN 81-50 : 2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
03/307803 DC : DRAFT MAY 2003 EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES
BS EN 62314:2006 Solid-state relays
CEI EN 61812-1 : 2012 TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS
13/30252783 DC : 0 BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
07/30174056 DC : 0 BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
BS EN 60598-1:2015 Luminaires General requirements and tests
BS EN 60079-2:2014 Explosive atmospheres Equipment protection by pressurized enclosure \'p\'
EN 61534-1:2011/A1:2014 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS (IEC 61534-1:2011/A1:2014)
I.S. EN 81-50:2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
BS EN 61008-1 : 2012 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED)
EN 61995-1:2008/A1:2017 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 61995-1:2005/A1:2016)
I.S. EN 60079-7:2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
I.S. EN 61643-11:2012 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS
I.S. EN 60320-2-4:2006 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 2-4: APPLIANCE COUPLERS DEPENDENT ON APPLIANCE WEIGHT FOR ENGAGEMENT
I.S. EN 62752:2016/AC:2019-03 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
BS EN 60335-1 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
I.S. EN 50502:2015 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS
I.S. EN 50065-4-7:2005 SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS
PREN 50630 : DRAFT 2014 BS EN 50630 - TIME-DELAYED RESIDUAL CURRENT OPERATED CIRCUIT BREAKERS TYPE M WITHOUT OVER-CURRENT PROTECTION OR APPLICATION IN CIRCUITS WITH RATED CURRENTS GREATER ABOVE 32 A
BS EN 61184:2017 Bayonet lampholders
BS EN 61812-1:2011 Time relays for industrial and residential use Requirements and tests
UNI EN 81-31 : 2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
BS EN 60079-15:2010 Explosive atmospheres Equipment protection by type of protection \'n\'
I.S. EN 60950-1:2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
UNE-EN 61347-1:2016 Lamp controlgear - Part 1: General and safety requirements
EN 61009-1:2012/A12:2016 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
UNE-EN 60320-2-4:2007 Appliance couplers for household and similar general purposes - Part 2-4: Appliance couplers dependent on appliance weight for engagement
BS EN 61800-5-1:2007 Adjustable speed electrical power drive systems Safety requirements. Electrical, thermal and energy
UNE-EN 60079-11:2013 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
UNE-EN 50521:2010 Connectors for photovoltaic systems - Safety requirements and tests
UNE-EN 61535:2010 Installation couplers intended for permanent connection in fixed installations
EN 60745-1:2009/A11:2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 60745-1:2006 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60898-1:2003/A13:2012 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED)
UNE-EN 60730-1:2013 Automatic electrical controls for household and similar use - Part 1: General requirements
UNE-EN 60950-1:2007 Information technology equipment - Safety - Part 1: General requirements
EN 60898-1:2003/A13:2012 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED)
BS EN 61534-1 : 2011 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
EN 60598-1:2015/A1:2018 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
EN 61008-1:2012/A12:2017 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED)
I.S. EN 61535:2009 INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS (IEC 61535:2009 (EQV))
BS EN 81-31:2010 Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts
BS EN 61995-1:2008 Devices for the connection of luminaires for household and similar purposes General requirements
BS EN 60947-1 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
11/30233197 DC : 0 BS EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES
EN 60400:2017 Lampholders for tubular fluorescent lamps and starterholders
CEI EN 62314 : 2007 SOLID-STATE RELAYS
CEI EN 50065-4-7 : 2007 SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND FROM 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS
UNE-EN 60065:2015 Audio, video and similar electronic apparatus - Safety requirements
BS EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
CEI EN 61347-1 : 2016 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
BS EN 60252-2 : 2011 AC MOTOR CAPACITORS - PART 2: MOTOR START CAPACITORS
12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
I.S. EN 60730-1:2016 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
UNE-EN 50502:2016 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
NF EN 81-31 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
I.S. EN 50521:2008 CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
PREN 50502 : DRAFT 2013 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
BS EN 61810-1:2015 Electromechanical elementary relays General and safety requirements
I.S. EN 60127-6:2014 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
I.S. EN 60065:2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
I.S. EN 62368-1:2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
I.S. EN 61184:2017 BAYONET LAMPHOLDERS
UNE-EN 60320-1:2016 Appliance couplers for household and similar general purposes - Part 1: General requirements
I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
I.S. EN 61558-1:2006 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
I.S. EN 60747-5-5:2011 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
HD 60269-2-1:2005 Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses
CEI EN 62310-1 : 2006 STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
BS EN 60691:2016 Thermal-links. Requirements and application guide
EN 62368-1:2014/AC:2017-03 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
I.S. EN 61243-3:2014 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
EN 50550:2011/A1:2014 POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
UNE-EN 60598-1:2015 Luminaires - Part 1: General requirements and tests
I.S. EN 60745-1:2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 60664-1:2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
UNE-HD 62640:2016 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
BS EN 60079-11:2012 Explosive atmospheres Equipment protection by intrinsic safety \'i\'
UNE-EN 62109-1:2011 Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements
UNE-EN 61009-1:2013 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
EN 60669-1:2018 Switches for household and similar fixed electrical installations - Part 1: General requirements
EN 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
BS EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems General requirements
BS EN 14598-3:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements
BS EN 60898-1 : 2003 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION
BS EN 60950-1 : 2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 60400:2011 Lampholders for tubular fluorescent lamps and starterholders
UNE-EN 50550:2012 Power frequency overvoltage protective device for household and similar applications (POP)
09/30212624 DC : 0 BS EN 50550 - POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
BS EN 50521 : 2009 CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
08/30179116 DC : DRAFT MAR 2008 BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
BS EN 61009-1 : 2012 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
UNE-EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements
UNE-EN 60079-2:2015 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
UNE-EN 61243-3:2015 Live working - Voltage detectors - Part 3: Two-pole low-voltage type
EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
EN 60320-1:2015/AC:2016 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60320-1:2015/COR1:2016)
EN 81-31:2010 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
PREN 50539-11 : DRAFT 2010 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
UNE-EN 60079-15:2013 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
I.S. EN 61008-1:2012&A1:2014/ac&A2:2014...A12:2017 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES
CEI EN 62752 : 1ED 2017 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
EN IEC 61058-1:2018 Switches for appliances - Part 1: General requirements
03/307802 DC : DRAFT MAY 2003 EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES
BS EN 61095:1993 Specification for electromechanical contactors for household and similar purposes
BS EN 50124-1:2017 Railway applications. Insulation coordination Basic requirements. Clearances and creepage distances for all electrical and electronic equipment
BS EN 60664-4:2006 Insulation coordination for equipment within low-voltage systems Consideration of high-frequency voltage stress
10/30218152 DC : 0 BS EN 50539-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
BS EN 61643-11 : 2012 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
I.S. EN 62477-1:2012 SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL
BS EN 60127-6:2014 Miniature fuses Fuse-holders for miniature fuse-links
I.S. EN 60691:2016 THERMAL-LINKS - REQUIREMENTS AND APPLICATION GUIDE
I.S. EN 60898-1:2003 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002 (MOD))
I.S. EN 60598-1:2015 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
EN IEC 62688:2018 Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification
I.S. EN 81-31:2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
PREN 50066 : DRAFT 2015 MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
I.S. EN 60947-1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
I.S. EN 61095:2009 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
I.S. EN IEC 62688:2018 CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION
EN 60838-1:2017/A1:2017 MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60838-1:2016/A1:2017)
UNE-EN 61995-1:2010 Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements
UNE-EN 60079-7:2016 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
I.S. EN 62196-1:2014 PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61242:1999 ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES
I.S. EN 62314:2006 SOLID-STATE RELAYS
EN 62477-1:2012/A1:2017 SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016)
EN 81-50:2014 Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components
EN 60747-5-5:2011/A1:2015 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013)
UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 50550 : 2011 POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
BS EN 62135-1:2015 Resistance welding equipment Safety requirements for design, manufacture and installation
BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
BS EN 60730-1:2011 Automatic electrical controls for household and similar use General requirements
EN 61287-1:2014/AC:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014)
EN 50521:2008/A1:2012 CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
DIN EN 81-50:2015-02 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
EN 60252-2 : 2011 AMD 1 2013 AC MOTOR CAPACITORS - PART 2: MOTOR START CAPACITORS (IEC 60252-2:2010/A1:2013)
EN 61730-1:2007/A11:2014 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED)
EN 62310-1:2005 Static transfer systems (STS) - Part 1: General and safety requirements
EN 50065-4-7 : 2005 COR 2006 SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS
EN 62135-1:2015/AC:2016-02 RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
EN 60664-4:2006/corrigendum:2006 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 4: CONSIDERATION OF HIGH-FREQUENCY VOLTAGE STRESS
EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
HD 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
EN 61812-1:2011 Time relays for industrial and residential use - Part 1: Requirements and tests
EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 62314 : 2006 SOLID-STATE RELAYS
EN 60320-2-4 : 2006 AMD 1 2009 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 2-4: APPLIANCE COUPLERS DEPENDENT ON APPLIANCE WEIGHT FOR ENGAGEMENT
EN 62109-1 : 2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
EN 61095:2009 Electromechanical contactors for household and similar purposes
UNE-EN 81-50:2017 Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components

ISO 293:2004 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 3167:2014 Plastics Multipurpose test specimens
ISO 294-3:2002 Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates
ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials
IEC TR 62062:2002 Results of the Round Robin series of tests to evaluate proposed amendments to IEC 60112
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
ISO 294-1:2017 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
HD 380 : 200S2 TEST METHODS FOR EVALUATING RESISTANCE TO TRACKING AND EROSION OF ELECTRICAL INSULATING MATERIALS USED UNDER SEVERE AMBIENT CONDITIONS
IEC 60587:2007 Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.