Environmental testing - Part 1: General and guidance

Published date

03-21-2014

Publisher

European Committee for Standards - Electrical

Sorry this product is not available in your region.

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Standard atmospheric conditions
5 Use of test methods
6 Climatic sequence
7 Component climatic category
8 Application of tests
9 Significance of the numerical value of a quantity
Annex A (normative) - Component climatic category
Annex B (informative) - General guidance
Annex C (informative) - Environmental test tailoring
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications

IEC 60068-1:2013 includes a series of methods for environmental testing along with their appropriate severities, and prescribes various atmospheric conditions for measurements and tests designed to assess the ability of specimens to perform under expected conditions of transportation, storage and all aspects of operational use. Although primarily intended for electrotechnical products, this standard is not restricted to them and may be used in other fields where desired. Other methods of environmental testing, specific to the individual types of specimen, may be included in the relevant specifications. The framework of environmental test tailoring process is given in order to assist the production of test specifications with appropriate tests and test severities. This seventh edition cancels and replaces the sixth edition, published in 1988, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: - updated normative reference list; - indication of normative and informative annexes; - new informative Annex C, Environmental test tailoring.

Committee	CLC/SR 104
DocumentType	Standard
PublisherName	European Committee for Standards - Electrical
Status	Current
Supersedes	HD 234 : 200S1

Standards	Relationship
UNE-EN 60068-1:1997	Identical
NEN 10068-1 : 1995	Identical
I.S. EN 60068-1:2014	Identical
NEN EN IEC 60068-1 : 2014	Identical
SN EN 60068-1 : 1994	Identical
VDE 0468-1 : 2015	Identical
NBN EN 60068-1 : 2014	Identical
BS EN 60068-1:2014	Identical
IEC 60068-1:2013	Identical
PN EN 60068-1 : 2014	Identical
SN EN 60068-1:2014	Identical
NF EN 60068-1 : 2014	Identical
CEI EN 60068-1 : 2015	Identical
DIN EN 60068-1 : 2015	Identical
UNE-EN 60068-1:2014	Identical
PNE-FprEN 60068-1	Identical
BS EN 62817:2015+A1:2017	Identical

CLC/TS 50131-2-5:2004	Alarm systems - Intrusion systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors
BS EN 50131-2-7-3 : 2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
UNE-EN 60068-2-39:2016	Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
CEI EN 62193 : 2005	LIVE WORKING - TELESCOPIC STICKS AND TELESCOPIC MEASURING STICKS
UNE-EN 54-22:2016	Fire detection and fire alarm system - Part 22 : Resettable line-type heat detectors
BS EN 61747-5:1998	Liquid crystal and solid-state display devices Environmental, endurance and mechanical test methods
BS EN 60068-2-1:2007	Environmental testing Tests. Test A. Cold
BS EN 60068-3-1:2011	Environmental testing Supporting documentation and guidance. Cold and dry heat tests
I.S. EN 61000-4-25:2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001 (EQV))
CEI EN 62137-1-4 : 2010	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST
I.S. EN 62137-1-5:2009	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINTS - PART 1-5: MECHANICAL SHEAR FATIGUE TEST
CEI EN 60068-2-47 : 2006	ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS
I.S. EN 60352-7:2002	SOLDERLESS CONNECTIONS - PART 7: SPRING CLAMP CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
11/30205541 DC : 0	BS EN 54-7 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONISATION
BS EN 60603-2:1998	Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
CEI EN 60728-3 : 2011	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
BS EN 54-28:2016	Fire detection and fire alarm system Non-resettable line-type heat detectors
BS EN 60938-1:2000	Fixed inductors for electromagnetic interference suppression Generic specification
BS EN 61076-4-115:2003	Connectors for electronic equipment. Printed board connectors with assessed quality Backplane connector for InfiniBand equipment
BS EN 61481-1:2014	Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c.
15/30290851 DC : 0	BS EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
BS EN 54-31 : 2014	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 31: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE, CARBON MONOXIDE AND OPTIONALLY HEAT SENSORS
BS EN 60143-4:2010	Series capacitors for power systems Thyristors controlled series capacitors
BS EN 60393-2:2016	Potentiometers for use in electronic equipment Sectional specification. Lead-screw actuated and rotary preset potentiometers
CEI EN 62341-5 : 2011	ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
11/30240275 DC : 0	BS EN 54-22 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 22: RESETTABLE LINE TYPE HEAT DETECTORS
07/30170080 DC : DRAFT AUG 2007	PREN 50131-2-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC)
BS EN 170100:2001	Harmonized system of quality assessment for electronic components. Sectional specification: Waveguide type dielectric resonators
BS EN 61988-2-2:2003	Plasma display panels. Measuring methods Optoelectrical
I.S. EN 50131-10:2014	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT)
CEI EN 60068-2-57 : 2014	ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME HISTORY AND SINE-BEAT METHOD
BS EN 62575-1:2016	Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification
PREN 50849 : DRAFT 2014	SOUND SYSTEMS FOR EMERGENCY PURPOSES
I.S. EN 50173-1:2011	INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 62246-1:2015	Reed switches Generic specification
10/30219053 DC : 0	BS EN 50130-4 - ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS
UNE-EN 60068-2-38:2010	Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
BS EN 61051-1:2008	Varistors for use in electronic equipment Generic specification
EN 60068-2-38:2009	Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
BS EN 61076-3-115:2010	Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 12 related to IEC 61076-3-106. Push-pull type
BS EN 50849:2017	Sound systems for emergency purposes
14/30311384 DC : 0	BS EN 60115-2:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
BS EN 61757-1:2012	Fibre optic sensors Generic specification
BS EN 62040-5-3:2017	Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements
BS EN 60849:1998	Sound systems for emergency purposes
BS EN 171000:2001	Harmonized system of quality assessment for electronic components. Generic specification. Filters using waveguide type dielectric resonators
DIN EN 50173:2000-07	INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS
CEI EN 62093 : 2005	BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS
PREN 54-11 : DRAFT 2013	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
BS EN 60939-1:2010	Passive filter units for electromagnetic interference suppression Generic specification
PREN 54-20 : DRAFT 2014	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
CEI EN 61646 : 2012	THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
CEI EN 62586-1 : 2016	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
BS EN 60749:1999	Semiconductor devices. Mechanical and climatic test methods
PREN 14604 : DRAFT 2016	SMOKE ALARM DEVICES
11/30255450 DC : 0	BS EN 50849 - SOUND SYSTEMS FOR EMERGENCY PURPOSES
BS EN 60068-2-50:2000	Environmental testing. Test methods Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens
BS EN 60793-1-61:2017	Optical fibres Measurement methods and test procedures. Polarization crosstalk
BS EN 60539-1:2016	Directly heated negative temperature coefficient thermistors Generic specification
BS EN 61076-4-101:2001	Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
EN 61243-1:2005/A1:2010	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
BS EN 62262:2002	Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
BS EN 60384-4:2016	Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte
BS EN 62884-1:2017	Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement
BS EN 61338-1:2005	Waveguide type dielectric resonators Generic specification
04/30109635 DC : 0	BS EN 54-23 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARMS
CEI EN 61076-3-116 : 2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - PROTECTIVE HOUSINGS FOR USE WITH 8- WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER
BS EN 60068-2-47:2005	Environmental testing Tests. Mounting of specimens for vibration, impact and similar dynamic tests
I.S. EN 60068-3-8:2003	ENVIRONMENTAL TESTING - PART 3-8: SUPPORTING DOCUMENTATION AND GUIDANCE - SELECTING AMONGST VIBRATION TESTS
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
CEI EN 60384-11 : 2008	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
PREN 54-10 : DRAFT 2012	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
CEI EN 62271-204 : 2012	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGES ABOVE 52 KV
BS EN 50311:2003	Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps
10/30218875 DC : 0	BS EN 50130-5:2010 - ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
BS EN 50131-2-7-2 : 2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
09/30184483 DC : 0	BS EN 54-3 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
CEI EN 62496-2-2 : 2012	OPTICAL CIRCUIT BOARDS - PART 2-2: MEASUREMENTS - DIMENSIONS OF OPTICAL CIRCUIT BOARDS
BS EN 60384-1:2016	Fixed capacitors for use in electronic equipment Generic specification
02/540596 DC : DRAFT JULY 2002	PREN 54-17 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 17: SHORT CIRCUIT ISOLATORS
BS EN 60068-2-57:2013	Environmental testing Tests. Test Ff: Vibration. Time-history and sine-beat method
BS EN 61300-2-20:1997	Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Climatic sequence
BS EN 61076-3-100:2000	Connectors for use in d.c., low-frequency analogue and digital high-speed data applications Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
UNE-EN 16280:2013	Breath alcohol test devices for general public - Requirements and test methods
BS EN 60130-9:2011	Connectors for frequencies below 3 MHz Circular connectors for radio and associated sound equipment
I.S. EN 60384-18:2016	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
I.S. EN 60384-17:2005	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS
PREN 50130-4 : DRAFT 2010	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS
BS EN 61169-8:2007	Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC)
98/201910 DC : DRAFT APRIL 1998	PREN 50297 - PHOTOELECTRIC CONTROL UNITS FOR ROAD AND STREET LIGHTING
BS EN 50131-2-5:2008	Alarm systems. Intrusion and hold-up systems Requirements for combined passive infrared and ultrasonic detectors
BS EN 61881-3 : 2012	RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS
CEI EN 61076-7-100 : 2007	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
BS EN 61300-2-9:2017	Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Shock
I.S. EN 60143-4:2010	SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
CEI EN 60068-5-2 : 2000	ENVIRONMENTAL TESTING - PART 5: GUIDE TO DRAFTING OF TEST METHODS TERMS AND DEFINITIONS
BS EN 61114-2:1997	Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz band Mechanical and environmental tests on individual and collective receiving antennas
BS EN 60127-6:2014	Miniature fuses Fuse-holders for miniature fuse-links
DIN EN 45510-2-7:2003-12	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
PD CLC/TS 50131-2-10:2014	Alarm systems. Intrusion and hold-up systems Intrusion detectors. Lock state contacts (magnetic)
PREN 50134-3 : DRAFT 2009	ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 3: LOCAL UNIT AND CONTROLLER
CEI EN 61076-2-102 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY
UNE-EN 50467:2012	Railway applications - Rolling stock - Electrical connectors, requirements and test methods
I.S. EN 60068-2-55:2013	ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE - LOOSE CARGO TESTING INCLUDING BOUNCE (IEC 60068-2-55:2013 (EQV))
OVE/ONORM EN 61051-1 : 2009	VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 61988-2-5:2012	PLASMA DISPLAY PANELS - PART 2-5: MEASURING METHODS - ACOUSTIC NOISE (IEC 61988-2-5:2012 (EQV))
I.S. EN 61988-2-4:2011	PLASMA DISPLAY PANELS - PART 2-4: MEASURING METHODS - VISUAL QUALITY: IMAGE ARTIFACTS (IEC 61988-2-4:2011 (EQV))
I.S. EN 61215-2:2017	TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES
CEI EN 60384-17 : 2006	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS
S.R. CLC/TS 50131-2-7-3:2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
PREN 54-12 : DRAFT 2009	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM
I.S. EN 60738-1:2006	THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
EN IEC 60068-2-5:2018	Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
I.S. EN 60512-23-7:2005	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 23-7: SCREENING AND FILTERING TESTS - TEST 23G: EFFECTIVE TRANSFER IMPEDANCE OF CONNECTORS
CEI EN 61000-4-21 : 2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS
I.S. EN 61076-2-107:2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
I.S. EN 60130-9:2011	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
CEI EN 60384-13 : 2013	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
I.S. EN 62137-1-4:2009	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST
CEI EN 60746-1 : 2003	EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
CEI EN 61000-4-2 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
I.S. EN 61076-3-117:2009	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-117: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS OR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 14 RELATED TO IEC 61076-3-106 - PUSH-PULL COUPLING
I.S. EN 61076-4-101:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-101: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES, HAVING A BASIC GRID OF 2,0 MM FOR PRINTED BOARDS AND BACKPLANES IN ACCORDANCE WITH IEC 60917
CEI EN 50134-2 : 2000	ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES
EN 61215-2 : 2017 COR 2018	TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES (IEC 61215-2:2016/COR1:2018)
I.S. EN 140402:2015	BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
I.S. EN 60384-15:2017	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
I.S. EN 50311:2003	RAILWAY APPLICATIONS - ROLLING STOCK - D.C. SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS
I.S. EN IEC 61643-331:2018	COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTION - PART 331: PERFORMANCE REQUIREMENTS AND TEST METHODS FOR METAL OXIDE VARISTORS (MOV)
BS EN 61076-4-116 : 2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 4-116: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR A HIGH-SPEED TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION
BS EN 60352-2 : 2006	SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
I.S. EN 61076-3-120:2016	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A
I.S. EN 60384-20:2015	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
I.S. EN 50467:2011	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
I.S. EN 140402-801:2015	DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
I.S. EN 62333-3:2010	NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET
I.S. EN 60068-2-6:2008	ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
I.S. EN 60352-8:2011	SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
I.S. EN 62586-1:2017	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
I.S. EN 60352-2:2006	SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-2:2006 (EQV))
BS EN 50548 : 2011	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
I.S. EN 50528:2010	INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS
CEI EN 61076-4-111 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-111: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 61076-3-116:2008	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER
CEI EN 50131-2-3 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS
CEI EN 50508 : 2009	MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
I.S. EN 50102:1997	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
CEI EN 61169-52 : 2016	RADIO-FREQUENCY CONNECTORS - PART 52: SECTIONAL SPECIFICATION FOR SERIES MMCX RF COAXIAL CONNECTORS
CEI EN 60512-23-7 : 2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 23-7: SCREENING AND FILTERING TESTS - TEST 23G: EFFECTIVE TRANSFER IMPEDANCE OF CONNECTORS
CEI EN 61146-3 : 1998	VIDEO CAMERAS (PAL/SECAM/NTSC) - METHODS OF MEASUREMENT PART 3: NON-BROADCAST CAMERA-RECORDERS
CEI EN 62496-2-4 : 2014	OPTICAL CIRCUIT BOARDS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-4: OPTICAL TRANSMISSION TEST FOR OPTICAL CIRCUIT BOARDS WITHOUT INPUT/OUTPUT FIBRES
I.S. EN 60068-2-39:2016	ENVIRONMENTAL TESTING - PART 2-39: TESTS - TESTS AND GUIDANCE: COMBINED TEMPERATURE OR TEMPERATURE AND HUMIDITY WITH LOW AIR PRESSURE TESTS
PREN 54-7 : DRAFT 2015	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONISATION
I.S. EN 50548:2011	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
I.S. EN 50849:2017	SOUND SYSTEMS FOR EMERGENCY PURPOSES
I.S. EN 60728-14:2014	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY
I.S. EN 62575-1:2016	RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 50131-2-7-1:2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
CEI EN 60384-22 : 2013	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
16/30315066 DC : 0	BS EN 14604 - SMOKE ALARM DEVICES
I.S. EN 61114-2:1999	METHODS OF MEASUREMENT ON RECEIVING ANTENNAS FOR SATELLITE BROADCAST TRANSMISSION IN THE 11/12 GHZ BAND - PART 2: MECHANICAL AND ENVIRONMENTAL TESTS ON INDIVIDUAL AND COLLECTIVE RECEIVING ANTENNAS
I.S. EN 61076-2-001:2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION
I.S. EN 61248-1:1998	TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION
14/30274689 DC : 0	BS EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
BS EN 61076-1:2006	Connectors for electronic equipment. Product requirements Generic specification
I.S. EN 60127-6:2014	MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
I.S. EN 62576:2010	ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN HYBRID ELECTRIC VEHICLES - TEST METHODS FOR ELECTRICAL CHARACTERISTICS
CEI EN 61076-3-106 : 2007	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE
I.S. EN 61988-4:2007	PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
I.S. EN 60068-2-57:2013	ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD (IEC 60068-2-57:2013 (EQV))
I.S. EN 61076-4-103:1999	CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2.5 MM
I.S. EN 61300-2-9:2017	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
I.S. EN 60384-19:2015	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
I.S. EN 60939-1:2010	PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
I.S. EN 60068-2-81:2003	ENVIRONMENTAL TESTING - PART 2-81: TESTS - TEST EI: SHOCK - SHOCK RESPONSE SPECTRUM SYNTHESIS
EN 60068-2-21:2006	Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
I.S. EN 61076-2-105:2008	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING
I.S. EN 60849:1999	SOUND SYSTEMS FOR EMERGENCY PURPOSES
I.S. EN 61215:2005	CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
OVE/ONORM EN 50131-2-4 : 2008	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS
BS EN 45501:2015	Metrological aspects of non-automatic weighing instruments
EN 61076-5 : 2001	CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION
EN 50528:2010	Insulating ladders for use on or near low voltage electrical installations
EN 61300-2-9:2017	Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
EN 60512-9-3:2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
EN 175301-801:2006	Detail Specification: High density rectangular connectors, round removable crimp contacts
EN 61000-4-8:2010	Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
EN 60384-22:2012	Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
DIN EN 54-17:2006-03	Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 61337-1:2004	Filters using waveguide type dielectric resonators - Part 1: Generic specification
EN 61169-52:2015	Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors
EN 62197-1 : 2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
DIN EN 14154-2:2011-06	WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
EN 62137-1-2:2007	Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test
EN 61000-4-13:2002/A2:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002/A2:2015)
EN 140400:2003	Sectional specification: Fixed low power surface mount (SMD) resistors
EN 61076-7-100 : 2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
EN 61811-51:2002	Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction
EN 61076-4-108:2002	Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 60512-25-9 : 2008	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 25-9: SIGNAL INTEGRITY TESTS - TEST 25I: ALIEN CROSSTALK
EN 61076-4-101:2001	Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
EN 60603-7-5:2010	Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
EN 61643-331:2003	Components for low-voltage surge protective devices - Part 331: Specification for metal oxide varistors (MOV)
EN 61076-3-114 : 2009	Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type
EN 61112:2009	Live working - Electrical insulating blankets
EN 61988-2-1:2012	Plasma display panels - Part 2-1: Measuring methods - Optical and optoelectrical
EN 61753-052-6:2016	Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment
EN 60728-14:2014	Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology
EN 61019-1:2005	Surface acoustic wave (SAW) resonators - Part 1: Generic specification
EN 61169-49:2014	Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectors
EN 62246-1:2015	Reed switches - Part 1: Generic specification
EN 61300-2-20 : 1997	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-20: TESTS - CLIMATIC SEQUENCE
EN 60384-18:2016	Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
EN 62137-1-4:2009	Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test
EN 60384-8:2015/AC:2017-09	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-8:2015/COR1:2017)
EN 60384-3:2016	Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte
EN 140402-801:2015	Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2
EN 60939-1:2010	PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
EN 62813:2015	Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics
EN 61111 : 2009	LIVE WORKING - ELECTRICAL INSULATING MATTING
EN 50130-5:2011	ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
EN 50132-5-3:2012	Alarm systems - CCTV surveillance systems for use in security applications - Part 5-3: Video transmission - Analogue and digital video transmission
EN 62333-3:2010	Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet
EN 60384-6 : 2005	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS
EN 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
EN 61988-2-5 : 2012	PLASMA DISPLAY PANELS - PART 2-5: MEASURING METHODS - ACOUSTIC NOISE
CEN/TS 15213-6:2011	Road transport and traffic telematics - After-theft services for the recovery of stolen vehicles - Part 6: Test procedures
EN 61076-3-116 : 2008	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER
EN 61215:2005	Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
EN 61169-26:2013	Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors
EN 61189-6:2006	Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies
EN 61076-2:2011	Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
EN 61076-4-114:2003	Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
EN 61747-5:1998	Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods
EN 61180:2016	High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
EN 61146-3:1997	Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 3: Non-broadcast camera-recorders
EN 62496-2-2:2011	Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards
EN 61180-2:1994	High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
EN 62341-5:2009	Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods
EN 60068-2-70:1996	Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
EN 60728-13:2010	Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
EN 62040-5-3:2017	Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
EN 61076-2-106:2011	Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
EN 60068-2-81:2003	Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
EN 61051-1:2008	Varistors for use in electronic equipment - Part 1: Generic specification
EN 60068-2-5:2011	Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
EN 60839-11-1:2013/AC:2015	ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013)
EN 62137-1-3:2009	Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test
EN 61753-111-9:2010	Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean
EN 60747-5-3:2001/A1:2002	DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-3: OPTOELECTRONIC DEVICES - MEASURING METHODS
EN 62586-1:2017	Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
EN 60758:2016	Synthetic quartz crystal - Specifications and guidelines for use
EN 61811-54:2002	Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base
EN 61076-4-103:1999	Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
EN 60738-1:2006/A1:2009	THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
EN 61076-4-102:1997	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
EN 62604-1:2015	Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
EN 60068-2-47:2005	Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
EN 60195:2016	Method of measurement of current noise generated in fixed resistors
EN 50131-10:2014	Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT)
EN 62137-1-5:2009	Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test
EN 61965:2003	Mechanical safety of cathode ray tubes
EN 60384-20:2015	Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
EN 61730-2:2007/A1:2012	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011)
EN 61076-2-104:2014	Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
EN 61753-101-3:2008	Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment
EN 60115-2:2015	Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors
EN 50102:1995/corrigendum Jul. 2002	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
EN 61481-1:2014	Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN 61076-1:2006	Connectors for electronic equipment - Product requirements - Part 1: Generic specification
EN 60068-2-40:1999	Environmental testing - Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests
EN 61189-5-503:2017	Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
EN 62496-2-4 : 2013	OPTICAL CIRCUIT BOARDS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-4: OPTICAL TRANSMISSION TEST FOR OPTICAL CIRCUIT BOARDS WITHOUT INPUT/OUTPUT FIBRES (IEC 62496-2-4:2013)
EN 62137:2004/corrigendum:2005	ENVIRONMENTAL AND ENDURANCE TESTING - TEST METHODS FOR SURFACE-MOUNT BOARDS OF AREA ARRAY TYPE PACKAGES FBGA, BGA, FLGA, LGA, SON AND QFN
EN 61189-1 : 97 AMD 1 2001	TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 1: GENERAL TEST METHODS AND METHODOLOGY
EN 60746-1:2003	Expression of performance of electrochemical analyzers - Part 1: General
EN 62878-1-1:2015	Device embedded substrate - Part 1-1: Generic specification - Test methods
EN 60068-2-62 : 1995	ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EF: IMPACT, PENDULUM METHOD
EN 50130-4:2011/A1:2014	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
EN 60068-2-41:1999	Environmental testing - Part 2: Tests - Test Z/BM: Combined dry heat/low air pressure tests
EN 140402:2015/A1:2016	BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
EN 62674-1 : 2012	HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT (IEC 62674-1:2012)
EN 61313-1:1997	Fibre optic passive components and cable assemblies - Part 1: Capability approval - Generic specification
EN 50311:2003	Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps
EN 61076-4-113:2003	Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
EN 171000:2001	Generic specification: Filters using waveguide type dielectric resonators
EN 62319-1:2005	Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification
EN 61114-2:1996	Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas
EN 60384-23:2015	Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
EN 61753-111-7:2010	Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial
EN 61076-4-110:2002	Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
OVE/ONORM EN 50131-2-3 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS
I.S. EN 61757-1:2012	FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV))
PREN 54-13 : DRAFT 2014	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS
S.R. CEN/TS 15213-6:2011	ROAD TRANSPORT AND TRAFFIC TELEMATICS - AFTER-THEFT SERVICES FOR THE RECOVERY OF STOLEN VEHICLES - PART 6: TEST PROCEDURES
BS EN 61337-1:2004	Filters using waveguide type dielectric resonators Generic specification
BS EN 61076-3-122:2017	Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
I.S. EN 61051-1:2008	VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI 13-32 : 2000	WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS
08/30180887 DC : DRAFT MAY 2008	BS EN 50131-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
UNI CEN/TS 15213-6 : 2011	ROAD TRANSPORT AND TRAFFIC TELEMATICS - AFTER-THEFT SERVICES FOR THE RECOVERY OF STOLEN VEHICLES - PART 6: TEST PROCEDURES
BS EN 61076-2-106:2011	Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
BS EN 61076-2-107:2010	Connectors for electronic equipment. Product requirements Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
I.S. EN 61988-2-1:2012	PLASMA DISPLAY PANELS - PART 2-1: MEASURING METHODS - OPTICAL AND OPTOELECTRICAL (IEC 61988-2-1:2012 (EQV))
PREN 54-5 : DRAFT 2011	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT DETECTORS
BS EN 61215-2:2017	Terrestrial photovoltaic (PV) modules. Design qualification and type approval Test procedures
02/205172 DC : DRAFT JUN 2002	IEC 62104. ED.2.0 - CHARACTERISTICS OF DAB (DIGITAL AUDIO BROADCAST) RECEIVERS
BS EN 61076-4-111:2002	Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
08/30195238 DC : 0
UNE-EN 62271-204:2012	High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
BS EN 60939-3:2015	Passive filter units for electromagnetic interference suppression Passive filter units for which safety tests are appropriate
BS EN 61076-4-102:1997	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
99/703461 DC : DRAFT AUG 1999	BS EN 50131-2-2 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 2-2: REQUIREMENTS FOR PASSIVE INFRARED DETECTORS
CEI EN 60068-2-70 : 1997	ENVIRONMENTAL TESTING - PART 2: TESTS TEST XB: ABRASION OF MARKINGS AND LETTERINGS CAUSED BY RUBBING OF FINGERS AND HANDS
08/30193237 DC : 0	BS EN 50528 - INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS
BS EN 61753-052-6:2016	Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre non-connectorized fixed attenuator. Category O in outside plant environment
UNE-EN 61481-1:2015	Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
05/30117311 DC : 0	EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS AND SYSTEM REQUIREMENTS
BS EN 60384-21:2012	Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
BS EN 60738-1 : 2006	THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
BS EN 61076-2-001:2011	Connectors for electronic equipment. Product requirements Circular connectors. Blank detail specification
BS EN 61169-48:2015	Radio-frequency connectors Sectional specification for series BMP R.F. coaxial connectors
BS EN 62341-5:2009	Organic light emitting diode (OLED) displays Environmental testing methods
I.S. EN 50132-5-3:2012	ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION
EN 62262:2002	Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
BS EN 61076-3-106:2006	Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface
BS EN 50483-1:2009	Test requirements for low voltage aerial bundled cable accessories Generalities
CEI EN 60728-13-1 : 2013	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13-1: BANDWIDTH EXPANSION FOR BROADCAST SIGNAL OVER FTTH SYSTEM
BS EN 61076-2-105:2008	Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M5 connectors with screw-locking
CEI EN 62137-1-5 : 2010	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-5: MECHANICAL SHEAR FATIGUE TEST
CEI EN 61076-4-110 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
BS EN 61753-111-7:2010	Fibre optic interconnecting devices and passive components performance standard Sealed closures for category A. Aerial
BS EN 60870-2-2:1997	Telecontrol equipment and systems. Operating conditions Environmental conditions (climatic, mechanical and other non-electrical influences)
BS EN 61753-101-3:2009	Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category U. Uncontrolled environment
NF EN 54-23 : 2010	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
04/30104415 DC : DRAFT AUG 2004	EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
02/708067 DC : DRAFT SEP 2002	BS EN 50131-2-4 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS
DIN EN 54-26:2015-11	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS
BS EN 61243-1 : 2005	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
BS EN 45510-2-7:2002	Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear
DIN EN 54-29:2015-06	Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors
BS EN 50131-2-4:2008	Alarm systems. Intrusion and hold-up systems Requirements for combined passive infrared and microwave detectors
I.S. EN 60384-25:2015	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
PD CLC/TS 50131-11:2012	Alarm systems. Intrusion and hold-up systems Hold-up devices
BS EN 60384-8:2015	Fixed capacitors for use in electronic equipment Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
CEI EN 50131-2-6 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC)
CEI EN 60939-2 : 2005	PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE - TEST METHODS AND GENERAL REQUIREMENTS
I.S. EN 54-26:2015	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS
BS EN 60512-26-100 : 2008	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G
BS EN 60793-1-60:2017	Optical fibres Measurement methods and test procedures. Beat length
DD CLC/TS 50131-2-7-2:2009	Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (passive)
BS EN 61000-5-7:2001	Electromagnetic compatibility (EMC). Installation and mitigation guidelines Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code) - Degrees of protection against electromagnetic disturbances provided by enclosures (EM code)
BS EN 60068-2-53:2010	Environmental testing Tests and guidance. Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
EN 60939-3:2015/AC:2016-04	PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE (IEC 60939-3:2015/COR1:2016)
BS EN 60352-6:1998	Solderless connections Solderless insulation piercing connections. General requirements, test methods and practical guidance
BS EN 60384-16:2005	Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
NF EN 50130-5 : 2011	ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
BS EN 62878-1-1:2015	Device embedded substrate Generic specification. Test methods
EN 61753-111-8:2010	Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground
BS EN 61076-4-103:1999	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards
BS EN 60728-13-1:2017	Cable networks for television signals, sound signals and interactive services Bandwidth expansion for broadcast signal over FTTH system
BS EN 61146-3:1997	Video cameras (PAL/SECAM/NTSC). Method of measurement Non-broadcast camera-recorders
BS EN 62319-1:2005	Polymeric thermistors. Directly heated positive step function temperature coefficient Generic specification
BS EN 60115-8-1:2015	Fixed resistors for use in electronic equipment Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
BS EN 61076-7-100:2006	Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
BS EN 61481-2:2014	Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c.
I.S. EN 60352-5:2012-2015-10	SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012 (EQV))
15/30249614 DC : 0	BS IEC/IEEE 60780-323 ED 1.0 - NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION
EN 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
BS EN 61021-2:1997	Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment Electrical characteristics for cores using YEE 2 laminations
BS EN 60068-2-83:2011	Environmental testing Tests. Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste
BS EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
BS EN IEC 62246-1-1:2018	Reed switches Generic specification. Blank detail specification
BS EN 61076-4-104:1999	Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm - Detail specification for two part modular connectors (with optional shielding plates) for printed boards and backplanes, basic grid 2,0 mm, with terminations on a multiple grid of 0,5 mm
BS EN 62137-1-1:2007	Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Pull strength test
BS EN 62586-1:2017	Power quality measurement in power supply systems Power quality instruments (PQI)
BS EN 60384-6:2005	Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polycarbonate film dielectric d.c. capacitors
BS EN 60747-5-5 : 2011	SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
BS EN 60384-19:2015	Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
UNE-EN 60068-2-78:2013	Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
BS EN 50131-3:2009	Alarm systems. Intrusion and hold-up systems Control and indicating equipment
BS EN 60862-1:2015	Surface acoustic wave (SAW) filters of assessed quality Generic specification
BS EN 62137-1-5:2009	Surface mounting technology. Environmental and endurance test methods for surface mount solder joints Mechanical shear fatigue test
BS EN 60068-2-27:2009	Environmental testing Tests. Test Ea and guidance. Shock
03/102595 DC : 0	BS EN 14637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATION AND MAINTENANCE
I.S. EN 61169-52:2015	RADIO-FREQUENCY CONNECTORS - PART 52: SECTIONAL SPECIFICATION FOR SERIES MMCX RF COAXIAL CONNECTORS
CEI EN 50467 : 2013	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
07/30134620 DC : 0	BS EN 50131-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES
BS EN 61760-4 : 2015	SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES
BS EN 50508:2009	Multi-purpose insulating sticks for electrical operations on high voltage installations
I.S. EN 54-28:2016	FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESETTABLE LINE-TYPE HEAT DETECTORS
BS EN 62674-1:2012	High frequency inductive components Fixed surface mount inductors for use in electronic and telecommunication equipment
BS EN 62137-1-2:2007	Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Shear strength test
BS EN 62193:2003	Live working. Telescopic sticks and telescopic measuring sticks
CEI EN 61076-2-106 : 2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67
CEI EN 60664-1 : 2008	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
BS EN 61988-4:2007	Plasma display panels Climatic and mechanical testing methods
CEI UNI EN 45510-2-7 : 2006	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
BS EN 61076-4-113:2003	Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
BS EN 50130-4 : 2011	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
EN 61076-2-113:2017	Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
PREN 50467 : DRAFT 2009	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS EN 60384-15:2017	Fixed capacitors for use in electronic equipment Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
BS EN 62024-2:2009	High frequency inductive components. Electrical characteristics and measuring methods Rated current of inductors for DC to DC converters
CEI EN 62104 : 2009	CHARACTERISTICS OF DAB RECEIVERS
CEI EN 50483-1 : 2011	TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 1: GENERALITIES
CEI EN 61076-3-120 : 1ED 2017	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A
I.S. EN 61337-1:2005	FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 1: GENERIC SPECIFICATION
BS EN 61210:2010	Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
BS EN 50132-5:2001	Alarm systems. CCTV surveillance systems for use in security applications Video transmission
CEI EN 61076-4-115 : 2004	CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-115: PRINTED BOARD CONNECTORS BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
BS EN 60352-1:1998	Solderless connections Wrapped connections. General requirements, test methods and practical guidance
I.S. EN 60384-21:2012	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-21:2011 (EQV))
BS EN 61076-3-116:2008	Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 13 related to IEC 61076-3-106. Locking lever
CEI EN 60352-3 : 1996	SOLDERLESS CONNECTIONS - PART 3: SOLDERLESS ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
BS EN 60068-2-55:2013	Environmental testing Tests. Test Ee and guidance. Loose cargo testing including bounce
CEI EN 60393-1 : 2010	POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN IEC 61189-5-503:2017	Test methods for electrical materials, printed board and other interconnection structures and assemblies General test method for materials and assemblies. Conductive anodic filaments (CAF) testing of circuit boards
PREN 4860 P1 : 2018	AEROSPACE SERIES - ENVIRONMENTAL TESTING - TEST XB: ABRASION OF MARKINGS, LETTERINGS, SURFACES AND MATERIALS CAUSED BY RUBBING OF FINGERTIPS AND HANDS
CEI EN 50173-1 : 2011	INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
PREN 54-28 : DRAFT 2015	FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESETTABLE LINE-TYPE HEAT DETECTORS
UNE-EN 50131-10:2014	Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT)
CEI EN 61111 : 2010	LIVE WORKING - ELECTRICAL INSULATING MATTING
I.S. EN 61076-3-115:2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE
UNI EN 15964 : 2011	BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
I.S. EN 50131-2-4:2008	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS
I.S. EN 61000-4-14:1999	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
CEI EN 60384-26 : 2011	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
BS EN 60115-1 : 2011	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 60068-3-1:2011	ENVIRONMENTAL TESTING - PART 3-1: SUPPORTING DOCUMENTATION AND GUIDANCE - COLD AND DRY HEAT TESTS (IEC 60068-3-1:2011)
I.S. EN 60068-3-5:2002	ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
I.S. EN 50508:2009	MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
I.S. EN 61019-1:2005	SURFACE ACOUSTIC WAVE (SAW) RESONATORS - PART 1: GENERIC SPECIFICATION
I.S. EN 60603-2:1998	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
I.S. EN 61988-2-2:2003	PLASMA DISPLAY PANELS - PART 2-2: MEASURING METHODS - OPTOELECTRICAL
I.S. EN 50131-4:2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
I.S. EN 16280:2012	BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
I.S. EN 60115-8-1:2015	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
BS EN 61000-4-17 : 1999	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-17: TESTING AND MEASUREMENT TECHNIQUES - RIPPLE ON D.C. INPUT POWER PORT IMMUNITY TEST
I.S. EN 60115-8:2012	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009 (MOD))
EN 62884-1:2017	Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
I.S. EN 60793-1-60:2017	OPTICAL FIBRES - PART 1-60: MEASUREMENT METHODS AND TEST PROCEDURES - BEAT LENGTH
I.S. EN 61000-4-17:2000	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-17 - TESTING AND MEASUREMENT TECHNIQUES - RIPPLE ON D.C. INPUT POWER PORT IMMUNITY TEST
I.S. EN 54-23:2010	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
I.S. EN 60384-14:2016	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
I.S. EN 50131-2-7-3:2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
I.S. EN 60068-2-82:2007	ENVIRONMENTAL TESTING - PART 2-82: TESTS - TEST TX: WHISKER TEST METHODS FOR ELECTRONIC AND ELECTRIC COMPONENTS
BS EN 60384-9:2015	Fixed capacitors for use in electronic equipment Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
I.S. EN 62852:2015	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 61988-2-3:2009	PLASMA DISPLAY PANELS - PART 2-3: MEASURING METHODS - IMAGE QUALITY: DEFECTS AND DEGRADATION
CEI EN 60068-2-58 : 2016	ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD)
CEI EN 60068-2-5 : 2012	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
CEI EN 61760-4 : 2016	SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES
I.S. EN 61076-3-106:2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE
I.S. EN 61811-55:2002	ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 55: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 11 MM X 7,5 MM (MAX.) BASE
BS EN 54-7:2001	Fire detection and fire alarm systems Smoke detectors. Point detectors using scattered light, transmitted light or ionization
CEI EN 60512-9-3 : 2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
CEI EN 61747-1 : 2004	LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 1: GENERIC SPECIFICATION
CEI EN 60728-6 : 2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
CEI EN 50131-2-4 : 2008	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS
I.S. EN 61000-4-21:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS
I.S. EN 61881-3:2012	RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012 (EQV))
I.S. EN 54-5:2017	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS
I.S. EN 60068-2-64:2008	ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
I.S. EN 60068-2-83:2011	ENVIRONMENTAL TESTING - PART 2-83: TESTS - TEST TF: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS FOR SURFACE MOUNTING DEVICES (SMD) BY THE WETTING BALANCE METHOD USING SOLDER PASTE (IEC 60068-2-83:2011 (EQV))
CEI EN 60068-3-1 : 2013	ENVIRONMENTAL TESTING - PART 3-1: SUPPORTING DOCUMENTATION AND GUIDANCE - COLD AND DRY HEAT TESTS
I.S. EN 60212:2011	STANDARD CONDITIONS FOR USE PRIOR TO AND DURING THE TESTING OF SOLID ELECTRICAL INSULATING MATERIALS
I.S. EN 61076-2:2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2: SECTIONAL SPECIFICATION FOR CIRCULAR CONNECTORS
I.S. EN 60384-22:2012	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (IEC 60384-22:2011 (EQV))
BS EN 60603-7 : 2009	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS
13/30277397 DC : 0	BS EN 54-11 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
I.S. EN 61481-2:2014	LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C.
DIN EN 54-7:2015-07 (Draft)	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
I.S. EN 60728-3:2011	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
UNE-EN 61000-4-21:2012	Electromagnetic compatibility (EMC) -- Part 4-21: Testing and measurement techniques - Reverberation chamber test methods
I.S. EN 60393-6:2016	POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
DIN EN 50134-2 : 2000	ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES
VDE 0468-2-69 : 2018	ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD (IEC 60068-2-69:2017)
I.S. EN 62246-1:2015	REED SWITCHES - PART 1: GENERIC SPECIFICATION
CEI EN 60793-1-60 : 1ED 2017	OPTICAL FIBRES - PART 1-60: MEASUREMENT METHODS AND TEST PROCEDURES - BEAT LENGTH
BS EN 60384-20:2015	Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
UNE-EN 60068-2-5:2011	Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
CEI EN 60384-4 : 2007	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
CLC/TS 50131-2-7-1:2009	Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
CEI EN 60068-2-78 : 2013	ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE
CEI EN 61988-2-1 : 2012	PLASMA DISPLAY PANELS - PART 2-1: MEASURING METHODS - OPTICAL AND OPTOELECTRICAL
CEI EN 60143-4 : 2012	SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
CEI EN 60603-1 : 2001	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY
PREN 15964 : DRAFT 2009	BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
I.S. EN 60368-1:2000	PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
EN 60384-25:2015	Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
I.S. EN 60068-2-70:1997	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST XB: ABRASION OF MARKINGS AND LETTERINGS CAUSED BY RUBBING OF FINGERS AND HANDS
I.S. EN 50134-3:2012	ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 3: LOCAL UNIT AND CONTROLLER
I.S. EN 61313-1:1999	FIBRE OPTIC PASSIVE COMPONENTS AND CABLE ASSEMBLIES - PART 1: CAPABILITY APPROVAL - GENERIC SPECIFICATION
I.S. EN 60107-1:1999	METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSION - PART 1: GENERAL CONSIDERATIONS - MEASUREMENTS ON DISPLAYS AT RADIO AND VIDEO FREQUENCIES
I.S. EN 62193:2003	LIVE WORKING - TELESCOPIC STICKS AND TELESCOPIC MEASURING STICKS
I.S. EN 60512-9-3:2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
I.S. EN 61169-40:2011	RADIO-FREQUENCY CONNECTORS - PART 40: SECTIONAL SPECIFICATION FOR 2.4 SERIES RF CONNECTORS
S.R. CLC/TS 50131-2-7-2:2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
I.S. EN 60115-9:2004	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTOR NETWORKS WITH INDIVIDUALLY MEASURABLE RESISTORS
UNE-EN 54-3:2016	Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
DIN EN 15267-3:2008-03	Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
DIN EN 14604:2016-02 (Draft)	Smoke alarm devices; German and English version prEN 14604:2016
EN 54-22:2015	Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors
BS EN 14154-3 : 2005	WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
EN 50131-2-4:2008	Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors
EN 60384-13:2012	Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
EN 60352-7:2002	Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
DIN EN 54-3:2001-10	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
I.S. EN 45501:2015	METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
EN 60947-1:2007/A2:2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
EN 60603-7:2009/A1:2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008/A1:2011)
EN 45501:2015	METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
VDE 0682-412 : 2001 AMD 1 2003	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
DIN EN 61243-2 : 2001 AMD 2 2003	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
VDE 0830-8-10 : 1998	ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS
BS EN 60068-2-2:2007	Environmental testing Tests. Test B. Dry heat
BS EN 62333-3:2010	Noise suppression sheet for digital devices and equipment Characterization of parameters of noise suppression sheet
12/30256417 DC : 0	BS EN 54-31 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 31: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE, CARBON MONOXIDE AND OPTIONALLY HEAT SENSORS
09/30208451 DC : 0	BS EN 54-29 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE AND HEAT SENSORS
BS EN 61811-52:2002	Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 20 mm x 10 mm base
BS EN 62137:2004	Environmental and endurance testing. Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN
I.S. EN 61076-2-106:2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67
BS EN 62137-1-3:2009	Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Cyclic drop test
CEI EN 60068-3-5 : 2002	ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
I.S. EN 61076-3-118:2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
BS EN 61811-1:2015	Electromechanical telecom elementary relays of assessed quality Generic specification and blank detail specification
BS EN 61076-3-110:2016	Connectors for electronic equipment. Product requirements Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
EN 61076-3-122:2017	Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
BS EN 60352-8:2011	Solderless connections Compression mount connections. General requirements, test methods and practical guidance
BS EN 61189-6:2006	Test methods for electrical materials, interconnection structures and assemblies Test methods for materials used in manufacturing electronic assemblies
BS EN 60115-2:2015	Fixed resistors for use in electronic equipment Sectional specification: Leaded fixed low power film resistors
BS EN 61988-2-3:2009	Plasma display panels Measuring methods. Image quality. Defects and degradation
BS EN 61988-2-5:2012	Plasma display panels Measuring methods. Acoustic noise
I.S. EN 50131-2-6:2008	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC)
CEI EN 61076-2-107 : 2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
CEI EN 60352-5 : 2013	SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
BS EN 54-16:2008	Fire detection and fire alarm systems Voice alarm control and indicating equipment
CEI EN 61076-3-118 : 2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
CEI EN 60115-8-1 : 2016	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
BS EN 50131-10:2014	Alarm systems. Intrusion and hold-up systems Application specific requirements for Supervised Premises Transceiver (SPT)
BS EN 54-22:2015	Fire detection and fire alarm systems Resettable line-type heat detectors
BS EN 62790:2015	Junction boxes for photovoltaic modules. Safety requirements and tests
BS EN 61189-1:1997	Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods and methodology
09/30214460 DC : 0	BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
BS EN 50083-5:2002	Cabled distribution systems for television and sound signals Headend equipment
09/30202602 DC : 0	BS EN 50134-3 - ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 3: LOCAL UNIT AND CONTROLLER
CEI EN 61112 : 2010	LIVE WORKING - ELECTRICAL INSULATING BLANKETS
CEI EN 61076-4-100 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES
BS EN 60068-2-41:2000	Environmental testing. Test methods Tests. Test Z/BM: Combined dry heat/low air pressure tests
BS EN 61076-4-110:2002	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
11/30205538 DC : 0	BS EN 54-5 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT DETECTORS
BS EN 61000-4-25 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS
CEI EN 62197-1 : 2007	CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
UNE-EN 62586-1:2014	Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
UNE-EN 62718:2016	Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
03/117188 DC : DRAFT OCT 2003	BS EN 12101-10 - SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES
DD CLC/TS 50131-2-5:2004	Alarm systems. Intrusion systems Requirements for combined passive infrared and ultrasonic detectors
11/30243902 DC : 0	BS EN 16280 - BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
BS EN 60068-2-6:2008	Environmental testing Tests. Test Fc. Vibration (sinusoidal)
BS EN 62496-2-4:2013	Optical circuit boards. Basic test and measurement procedures Optical transmission test for optical circuit boards without input/output fibres
BS EN 61000-4-28 : 2000	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-28: TESTING AND MEASUREMENT TECHNIQUES - VARIATION OF POWER FREQUENCY, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
EN 61196-10:2016/AC:2016-02	COAXIAL COMMUNICATION CABLES - PART 10: SECTIONAL SPECIFICATION FOR SEMI-RIGID CABLES WITH POLYTETRAFLUOROETHYLENE (PTFE) DIELECTRIC
I.S. EN 61243-2:1999	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
BS EN 61019-1:2005	Surface acoustic wave (SAW) resonators Generic specification
12/30254899 DC : 0	BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
UNI EN 16280 : 2013	BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
BS EN 61811-53:2002	Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 14 mm x 9 mm base
BS EN 16280:2012	Breath alcohol test devices for general public. Requirements and test methods
BS EN 61112:2009	Live working. Electrical insulating blankets
I.S. EN 61337-2:2004	FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 2: GUIDANCE FOR USE
BS EN 60268-7:2011	Sound system equipment Headphones and earphones
CEI EN 50528 : 2011	INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS
09/30195206 DC : 0	BS EN 54-30 - FIRE DETECTION AND ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS
CEI EN 62576 : 2011	ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN HYBRID ELECTRIC VEHICLES - TEST METHODS FOR ELECTRICAL CHARACTERISTICS
CEI EN 60384-15 : 1ED 2017	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
CEI EN 61076-4-114 : 2004	CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM
CEI EN 60793-1-61 : 1ED 2017	OPTICAL FIBRES - PART 1-61: MEASUREMENT METHODS AND TEST PROCEDURES - POLARIZATION CROSSTALK
BS EN 60068-2-54:2006	Environmental testing Tests - Test Ta: Solderability testing of electronic components by the wetting balance method
BS EN 61076-3:2008	Connectors for electronic equipment. Product requirements Rectangular connectors. Sectional specification
CEI EN 60384-3 : 2007	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
BS EN 61076-3-118:2010	Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling
BS EN 61076-2:2011	Connectors for electronic equipment. Product requirements Sectional specification for circular connectors
11/30254162 DC : 0	BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
CEI EN 50132-5-3 : 2013	ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION
CEI EN 60368-1 : 2006	PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
DIN V VDE V 0829-240 : 1997	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 240: TECHNICAL REPORT: GUIDELINES FOR THE PROFESSIONAL INSTALLATION OF TWISTED PAIR (TP) CABLES CLASS 1
BS EN 61076-3-114:2009	Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for.protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 11 related to IEC 61076-3-106. Bayonet coupling type
12/30254902 DC : DRAFT JAN 2012	BS EN 54-10 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
BS EN 61603-1:1997	Transmission of audio and/or video and related signals using infra-red radiation General
CEI EN 61076-4-108 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
DD CLC/TS 50467:2008	Railway applications. Rolling stock. Electrical connectors, requirements and test methods
I.S. EN 60839-11-1:2013	ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS
CEI EN 50131-2-7-1 : 2013	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
CEI EN 60352-8 : 2012	SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
CEI EN 61076-3-115 : 2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE
I.S. EN 60115-2:2015	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
I.S. EN 61076-4-111:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS WITH ASSESSED QUALIFY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
BS EN 120000:1996	Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices
BS EN 60352-4:1995	Solderless connections Solderless non-accessible insulation displacement connections. General requirements, test methods and practical guidance
BS EN 60068-2-40:2000	Environmental testing. Test methods Test Z/AM. Combined cold/low air pressure tests
BS EN 62576:2010	Electric double-layer capacitors for use in hybrid electric vehicles. Test methods for electrical characteristics
UNI EN 54-24 : 2008	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
BS EN 61811-55:2002	Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 11 mm x 7,5 mm (max.) base
BS EN 175301-801:2006	Detail specification. High density rectangular connectors, round removable crimp contacts
BS EN 62391-2:2006	Fixed electric double-layer capacitors for use in electronic equipment Sectional specification. Electric double-layer capacitors for power application
BS EN 61076-3-120:2016	Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
UNE-EN 61196-10:2016	Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
BS EN 62813:2015	Lithium ion capacitors for use in electric and electronic equipment. Test methods for electrical characteristics
BS EN 60512-16-21:2012	Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16u. Whisker test via the application of external mechanical stresses
BS EN 60352-7:2002	Solderless connections Spring clamp connections. General requirements, test methods and practical guidance
BS EN 60384-25:2015	Fixed capacitors for use in electronic equipment Sectional specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
BS EN 60068-2-51:2000	Environmental testing. Test methods Tests. Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
I.S. EN 61191-6:2010	PRINTED BOARD ASSEMBLIES - PART 6: EVALUATION CRITERIA FOR VOIDS IN SOLDERED JOINTS OF BGA AND LGA AND MEASUREMENT METHOD
BS EN 61811-54:2002	Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 15 mm x 7,5 mm base
CEI EN 60728-13 : 2010	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS
CEI EN 61587-1 : 2012	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
CEI EN 62024-2 : 2009	HIGH FREQUENCY INDUCTIVE COMPONENTS - ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: RATED CURRENT OF INDUCTORS FOR DC TO DC CONVERTERS
CEI EN 60107-1 : 1998	METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSIONS - PART 1: GENERAL CONSIDERATIONS - MEASUREMENTS AT RADIO AND VIDEO FREQUENCIES
BS EN 50131-2-7-1 : 2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
BS EN 61076-2-109:2014	Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz
14/30317306 DC : 0	BS EN 60115-8-1:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
BS EN 61076-4-105:1998	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry
BS EN 60368-1:2000	Piezoelectric filters Generic specification
CEI EN 62884-1 : 1ED 2018	MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
BS EN 54-30:2015	Fire detection and fire alarm systems Multi-sensor fire detectors. Point detectors using a combination of carbon monoxide and heat sensors
BS EN 60512-9-3:2011	Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
BS EN 60939-2:2005	Passive filter units for electromagnetic interference suppression Sectional specification: passive filter units for which safety tests are appropriate. Test methods and general requirements
BS EN 60947-5-4:2003	Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements Method of assessing the performance of low-energy contacts. Special tests
UNE-EN 61000-4-16:2016	Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
UNE-EN 61020-1:2011	Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
BS EN 60384-13:2012	Fixed capacitors for use in electronic equipment Sectional specification/ Fixed polypropylene film dielectric metal foil d.c. capacitors
PD 6580-2:1995	Home and building electronic systems. Technical report 1 Guidelines for the professional installation of Twisted Pair cables class 1
BS EN 60068-2-30:2005	Environmental testing Tests. Test Db and guidance: Damp heat, cyclic (12 h + 12 h cycle)
BS EN 140400:2003	Harmonized system of quality assessment for electronic components. Sectional specification. Fixed low power surface mount (SMD) resistors
I.S. EN 60068-2-5:2011	ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
I.S. EN 62496-2-4:2013	OPTICAL CIRCUIT BOARDS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-4: OPTICAL TRANSMISSION TEST FOR OPTICAL CIRCUIT BOARDS WITHOUT INPUT/OUTPUT FIBRES (IEC 62496-2-4:2013 (EQV))
CEI EN 61180 : 1ED 2017	HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS, TEST EQUIPMENT
EN IEC 61076-2-111:2018	Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
EN 54-5:2017	Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors
VDE 0830-4-2 : 2000	ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES
EN 60068-2-69:2017/AC:2018-03	ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD (IEC 60068-2-69:2017/COR1:2018)
I.S. EN 61189-5:2006	TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES
CEI EN 61076-2-001 : 2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION
CEI EN 61300-2-9 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
I.S. EN 50131-3:2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT
CEI EN 60107-7 : 1998	METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION - PART 7: HDTV DISPLAYS
BS EN 140402 : 2015	BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
I.S. EN 61007:1998	TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - MEASURING METHODS AND TEST PROCEDURES
CEI EN 61114-2 : 1997	METHODS OF MEASUREMENT ON RECEIVING ANTENNAS FOR SATELLITE BROADCAST TRANSMISSION IN THE 11/12 GHZ BAND PART 2: MECHANICAL AND ENVIRONMENTAL TESTS ON INDIVIDUAL AND COLLECTIVE RECEIVING ANTENNAS
I.S. EN 60384-6:2005	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS
CEI EN 61076-2 : 2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2: SECTIONAL SPECIFICATION FOR CIRCULAR CONNECTORS
I.S. EN 140401-804:2011	DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
I.S. EN 60068-2-75:2014	ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS
BS EN 61076-2-101:2012	Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M12 connectors with screw-locking
I.S. EN 61076-2-109:2014	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ
CEI EN 60068-2-52 : 1997	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION)
CEI EN 60068-2-48 : 2000	ENVIRONMENTAL TESTING - PART 2: TESTS - GUIDANCE ON THE APPLICATION OF THE TESTS OF IEC PUBLICATION 60068 TO SIMULATE THE EFFECTS OF STORAGE
I.S. EN 61076-4-102:1998	CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
EN 60728-13-1:2017	Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
I.S. EN 60939-3:2015	PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
BS EN 60384-24:2015	Fixed capacitors for use in electronic equipment Sectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
I.S. EN 61076-5:2002	CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION
BS EN 50173-1:2011	Information technology. Generic cabling systems General requirements
I.S. EN 60068-2-80:2005	ENVIRONMENTAL TESTING - PART 2-80: TESTS - TEST FI: VIBRATION - MIXED MODE
I.S. EN 140400:2004	SECTIONAL SPECIFICATION: FIXED LOW POWER SURFACE MOUNTING (SMD) RESISTORS
I.S. EN 60384-1:2016	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI EN 60122-1 : 2004	QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
UNE-EN 61481-2:2015	Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
I.S. EN 54-22:2015	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS
I.S. EN 61338-1:2005	WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 1: GENERIC SPECIFICATION
I.S. EN 175301-801:2006	DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS
I.S. EN 60068-2-2:2007	ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
I.S. EN 54-7:2000	COMPONENTS OF AUTOMATIC FIRE DETECTION SYSTEMS - POINT-TYPE SMOKE DETECTORS - DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
I.S. EN IEC 60068-2-52:2018	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION)
BS EN 62104:2007	Characteristics of DAB receivers
BS EN 140401-804 : 2011	DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
CEI EN 60068-2-27 : 2012	ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
NF EN 60068-3-5 : 2002	ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
CEI EN 60849 : 2007	SOUND SYSTEMS FOR EMERGENCY PURPOSES
I.S. EN 45510-2-7:2002	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
UNE-EN 62790:2015	Junction boxes for photovoltaic modules - Safety requirements and tests
CEI EN 61076-6 : 2004	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 6: LOOSE PART CONTACTS - SECTIONAL SPECIFICATION
I.S. EN 61146-3:1998	VIDEO CAMERAS (PAL/SECAM/NTSC) - METHODS OF MEASUREMENT - PART 3: NON-BROADCAST CAMERA-RECORDERS
EN IEC 61643-331:2018	Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)
EN 50173-1:2011	Information technology - Generic cabling systems - Part 1: General requirements
BS EN 61000-4-18 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-18: TESTING AND MEASUREMENT TECHNIQUES - DAMPED OSCILLATORY WAVE IMMUNITY TEST
I.S. EN 60068-2-53:2010	ENVIRONMENTAL TESTING - PART 2-53: TESTS AND GUIDANCE: COMBINED CLIMATIC (TEMPERATURE/HUMIDITY) AND DYNAMIC (VIBRATION/SHOCK) TESTS
I.S. EN 62884-1:2017	MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
CEI EN 60068-2-40 : 2000	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS
CEI EN 61076-2-105 : 2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING
CEI EN 60068-2-83 : 2012	ENVIRONMENTAL TESTING - PART 2-83: TESTS - TEST TF: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS FOR SURFACE MOUNTING DEVICES (SMD) BY THE WETTING BALANCE METHOD USING SOLDER PASTE
EN 54-13:2017	Fire detection and fire alarm systems - Part 13: Compatibility and connectability assessment of system components
UNI EN 54-16 : 2008	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT
EN 54-12:2015	Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
I.S. EN 61076-3-104:2017	CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
I.S. EN 60393-1:2009	POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 60068-2-54:2006	ENVIRONMENTAL TESTING - PART 2-54: TESTS - TEST TA: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS BY THE WETTING BALANCE METHOD
I.S. EN 61300-2-20:1998	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-20: TESTS - CLIMATIC SEQUENCE
I.S. EN 61984:2009	CONNECTORS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 60068-2-62:1996	ENVIRONMENTAL TESTING - PART 2: TEST METHODS TEST EF: IMPACT, PENDULUM HAMMER
I.S. EN 62319-1:2005	POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62137-1-2:2007	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST
I.S. EN 61189-3:2008	TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS)
I.S. EN 60938-1:1999	FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
I.S. EN 61189-1:1999	TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 1: GENERAL TEST METHODS AND METHODOLOGY
S.R. CLC/TS 50131-2-10:2014	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC)
I.S. EN 54-13:2017	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS
S.R. CLC/TS 50467:2008	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
I.S. EN 60068-2-21:2006	ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES
I.S. EN 60068-2-41:1999	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS
EN 61760-4:2015/A1:2018	SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES (IEC 61760-4:2015/A1:2018)
I.S. EN 60115-1:2011	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED)
I.S. EN 61587-1:2017	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
I.S. EN 61747-5:1999	LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS
BS EN 54-17:2005	Fire detection and fire alarm systems Short-circuit isolators
BS EN 54-21:2006	Fire detection and fire alarm systems Alarm transmission and fault warning routing equipment
UNE-EN 45501:2016	Metrological aspects of non-automatic weighing instruments
BS EN 14154-2 : 2005	WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
BS EN 14637:2007	Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance
UNE-EN 50521:2010	Connectors for photovoltaic systems - Safety requirements and tests
UNI EN 54-3 : 2014	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
I.S. EN 61646:2008	THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
EN 62790:2015	Junction boxes for photovoltaic modules - Safety requirements and tests
CEI EN 60068-2-64 : 2012	ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
EN 60268-7:2011	Sound system equipment - Part 7: Headphones and earphones
EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
UNE-EN 14154-3:2005	Water meters - Part 3 : Test methods and equipment
UNE-EN 14154-2:2005	Water meters - Part 2 : Installation and conditions of use
EN 140401-804:2011/A1:2013	DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
EN 60352-4:1994/A1:2000	SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
OVE/ONORM EN 60384-16 : 2006	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
EN 62024-2:2009	High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters
EN 61007:1997	Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
EN 60839-11-1:2013/AC:2015	ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013)
UNI EN 54-23 : 2010	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
EN 61000-4-28:2000/A2:2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-28: TESTING AND MEASUREMENT TECHNIQUES - VARIATION OF POWER FREQUENCY, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
UNI EN 14154-3 : 2011	WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
UNI EN 54-20 : 2006	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
UNI EN 14154-2 : 2011	WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
OVE/ONORM EN 60068-2-20 : 2009	ENVIRONMENTAL TESTING - PART 2-20: TESTS - TEST T: TEST METHODS FOR SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT OF DEVICES WITH LEADS
UNE-EN 54-16:2010	Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
CEI EN 60758 : 2010	SYNTHETIC QUARTZ CRYSTAL - SPECIFICATIONS AND GUIDELINES FOR USE
CEI EN 61076-4-103 : 2001	CONNECTORS FOR USE IN D.C. LOW - FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2,5 MM
CEI EN 61988-2-3 : 2010	PLASMA DISPLAY PANELS - PART 2-3: MEASURING METHODS - IMAGE QUALITY: DEFECTS AND DEGRADATION
CEI EN 60068-2-2 : 2008	ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
I.S. EN 61169-48:2015	RADIO-FREQUENCY CONNECTORS - PART 48: SECTIONAL SPECIFICATION FOR SERIES BMP R.F. COAXIAL CONNECTORS
07/30164493 DC : 0	BS EN 14637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATIONS AND MAINTENANCE
BS EN 61196-10:2016	Coaxial communication cables Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
11/30240441 DC : 0	BS EN 54-28 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESET TABLE LINE TYPE HEAT DETECTORS
I.S. EN 62104:2007	CHARACTERISTICS OF DAB RECEIVERS
BS EN 61076-2-102:2002	Connectors for electronic equipment. Circular connectors Circular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply
BS EN 61169-49:2014	Radio-frequency connectors Sectional specification for SMAA series R.F connectors
DIN EN 54-3:2014-09	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
I.S. EN 60793-1-61:2017	OPTICAL FIBRES - PART 1-61: MEASUREMENT METHODS AND TEST PROCEDURES - POLARIZATION CROSSTALK
BS EN 60352-5:2012	Solderless connections Press-in connections. General requirements, test methods and practical guidance
BS EN 60728-14:2014	Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology
BS QC 480000(1995) : 1995	CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION
BS EN 62604-1:2015	Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification
BS EN 60384-26:2010	Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
I.S. EN 60728-13-1:2017	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13-1: BANDWIDTH EXPANSION FOR BROADCAST SIGNAL OVER FTTH SYSTEM
BS EN 60689:2009	Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
CEI EN 61076-2-113 : 1ED 2017	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ
DD CEN/TS 15213-6:2011	Road transport and traffic telematics. After-theft services for the recovery of stolen vehicles Test procedures
NF EN 50528 : 2010	INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS
BS EN 61111 : 2010	LIVE WORKING - ELECTRICAL INSULATING MATTING
NF EN 61076 4 102 : 1998	CONNECTORS WITH ASSESSED QUALITY FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTERING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
BS EN 50131-2-3:2008	Alarm systems. Intrusion and hold-up systems Requirements for microwave detectors
CEI EN 60068-2-55 : 2014	ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE: LOOSE CARGO TESTING INCLUDING BOUNCE
CEI EN 60384-9 : 2016	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
BS EN 61270-1:1998	Capacitors for microwave ovens General
BS EN 61508-7:2010	Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures
BS EN 60068-2-70:1996	Environmental testing. Test methods Test Xb. Abrasion of markings and letterings caused by rubbing of fingers and hands
I.S. EN 54-30:2015	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS
09/30170243 DC : 0	BS EN 54-12 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM
10/30237986 DC : 0	BS EN 140401-804 - DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
CEI EN 60747-5-3 : 2002	DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-3: OPTOELECTRONIC DEVICES - MEASURING METHODS
DD CLC/TS 50131-4:2006	Alarm systems. Intrusion and hold-up systems Warning devices
BS EN 62421:2007	Electronics assembly technology. Electronic modules
BS EN 60384-22:2012	Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
CEI EN 62137-1-3 : 2009	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST
CEI EN 60947-5-4 : 2005	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-4: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - METHOD OF ASSESSING THE PERFORMANCE OF LOW-ENERGY CONTACTS - SPECIAL TESTS
CEI EN 50131-2-7-2 : 2013	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
BS EN 61811-11:2003	Electromechanical all-or-nothing relays Blank detail specification. Relays for industrial application
BS EN 61189-5:2006	Test methods for electrical materials, interconnection structures and assemblies Test methods for printed board assemblies
CEI EN 60352-6 : 1998	SOLDERLESS CONNECTIONS - PART 6: INSULATION PIERCING CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
CEI EN 60512-12-6 : 1997	ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT/ BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 12: SOLDERING TESTS - SECTION 6: TEST 12F: SEALING AGAINST FLUX AND CLEANING SOLVENTS IN MACHINE SOLDERING
BS EN 60746-1:2003	Expression of performance of electrochemical analyzers General
CEI EN 60384-18 : 2007	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
BS EN 60947-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
07/30158994 DC : 0	BS EN 54-22 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 22: LINE TYPE HEAT DETECTORS
BS EN 60747-5-3:2001	Discrete semiconductor devices and integrated circuits. Optoelectronic devices Measuring methods
I.S. EN 61076-4-115:2003	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
EN 60068-2-20:2008	Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
BS EN 61169-1:2013	Radio-frequency connectors Generic specification. General requirements and measuring methods
BS EN 61191-6:2010	Printed board assemblies Evaluation criteria for voids in soldered joints of BGA and LGA and measurement methods
BS EN 60068-3-8:2003	Environmental testing Supporting documentation and guidance - Selecting amongst vibration tests
BS EN 62496-2-2:2011	Optical circuit boards Measurements. Dimensions of optical circuit boards
I.S. EN 61076-2-101:2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING (IEC 61076-2-101:2012 (EQV))
BS EN 60728-3:2011	Cable networks for television signals, sound signals and interactive services Active wideband equipment for cable networks
BS EN 60068-2-9:2000	Environmental testing. Test methods Tests. Guidance for solar radiation testing
I.S. EN 62025-2:2005	HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS
EN IEC 60068-2-52:2018	Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
CEI EN 61051-1 : 2010	VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
14/30290848 DC : 0	BS EN 54-13 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS
BS EN 60758:2016	Synthetic quartz crystal. Specifications and guidelines for use
DD CLC/TS 50131-2-7-1:2009	Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (acoustic)
BS EN 50131-2-6:2008	Alarm systems. Intrusion and hold-up systems Opening contacts (magnetic)
BS EN 61007:1997	Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
BS EN 60068-2-78:2013	Environmental testing Tests. Test Cab: Damp heat, steady state
BS EN 61248-1:1997	Transformers and inductors for use in electronic and telecommunication equipment Generic specification
BS EN 62137-1-4:2009	Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Cyclic bending test
CEI EN 61189-5-503 : 1ED 2017	TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARD AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-503: GENERAL TEST METHOD FOR MATERIALS AND ASSEMBLIES - CONDUCTIVE ANODIC FILAMENTS (CAF) TESTING OF CIRCUIT BOARDS
BS EN 60839-11-1:2013	Alarm and electronic security systems Electronic access control systems. System and components requirements
BS EN 61603-3:1998	Transmission of audio and/or video and related signals using infra-red radiation Transmission systems for audio signals for conference and similar systems
I.S. EN 61076-4-113:2003	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
CEI EN 60268-7 : 2012	SOUND SYSTEM EQUIPMENT - PART 7: HEADPHONES AND EARPHONES
DIN EN 54-22:2015-07	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS
CEI EN 60068-2-30 : 2006	ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
BS EN 61481:2001	Live working. Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
EN IEC 61076-3-119:2018	Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
CEI EN 61076-3-122 : 1ED 2017	CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS
CEI CLC/TS 50131-2-8 : 2013	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS
99/715383 DC : DRAFT OCT 1999	BS EN 50131-4 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 4: WARNING DEVICES
EN 62104:2007	Characteristics of DAB receivers
PREN 50130-5 : DRAFT 2010	ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
BS EN 61169-40:2011	Radio-frequency connectors Sectional specification for 2.4 series RF connectors
BS EN 60068-2-82:2007	Environmental testing Tests. Test Tx. Whisker test methods for electronic and electric components
BS EN 175301-803:2006	Detail specification: rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable
BS EN 61337-2:2004	Filters using waveguide type dielectric resonators Guide for use
BS EN 60068-2-75:2014	Environmental testing Tests. Test Eh: Hammer tests
BS EN 15964:2011	Breath alcohol test devices other than single use devices. Requirements and test methods
BS EN 62093:2005	Balance-of-system components for photovoltaic systems. Design qualification natural environments
14/30311381 DC : 0	BS EN 50849 - SOUND SYSTEMS FOR EMERGENCY PURPOSES
BS EN 50130-5:2011	Alarm systems Environmental test methods
PD CLC/TS 50131-2-8:2012	Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors
BS EN 61965:2003	Mechanical safety of cathode ray tubes
11/30245742 DC : 0	BS EN 50131-10 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT)
BS EN 60122-1 : 2002	QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 61643-331:2003	Low voltage surge protective devices Specification for metal oxide varistors (MOV)
UNE-EN 62974-1:2018	Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
BS EN 61076-3-117:2009	Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface. Variant 14 related to IEC 61076-3-106. Push-pull coupling
BS EN 61076-4-108:2002	Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS EN 54-27:2015	Fire detection and fire alarms systems Duct smoke detectors
BS EN 61169-16:2007	Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (type N)
BS EN 60603-7-5:2010	Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
CLC/TS 50131-2-7-2:2009	Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
09/30202737 DC : 0	BS EN 15964 - BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
UNE-EN 50130-4:2011	Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems
UNE-EN 50131-2-7-1:2013	Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
I.S. EN 60384-11:2008	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
BS EN 60384-18:2016	Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic surface mount capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte
BS EN 61000-4-21:2011	Electromagnetic compatibility (EMC) Testing and measurement techniques. Reverberation chamber test methods
BS EN 60068-2-80:2005	Environmental testing Tests - Test Fi: Vibration. Mixed mode
BS EN 60068-2-20:2008	Environmental testing Tests. Test T. Test methods for solderability and resistance to soldering heat of devices with leads
BS EN 61243-2:1998	Live working. Voltage detectors Resistive type to be used for voltages of 1 kV to 36 kV a.c.
UNE-EN 15964:2012	Breath alcohol test devices other than single use devices - Requirements and test methods
08/30162181 DC : DRAFT APR 2008	BS EN 54-26 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: POINT FIRE DETECTORS USING CARBON MONOXIDE SENSORS
CLC/TS 50131-2-8:2012	Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
I.S. EN 60068-2-30:2005	ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
BS EN 60512-1:2001	Electromechanical components for electronic equipment. Basic testing procedures and measuring methods General
UNI CEI EN 45510-2-7 : 2011	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
I.S. EN 60195:2016	METHOD OF MEASUREMENT OF CURRENT NOISE GENERATED IN FIXED RESISTORS
BS EN 60195:2016	Method of measurement of current noise generated in fixed resistors
BS EN 61747-1:2000	Liquid crystal and solid-state display devices Generic specification
I.S. EN 60384-16:2005	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
CEI EN 62319-1 : 2005	POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
I.S. EN 54-12:2015	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM
UNE-EN 50483-1:2013	Test requirements for low voltage aerial bundled cable accessories -- Part 1: Generalities
CEI EN 61313-1 : 1998	FIBRE OPTIC PASSIVE COMPONENTS AND CABLE ASSEMBLIES - PART 1: CAPABILITY APPROVAL - GENERIC SPECIFICATION
CEI EN 61076-1 : 2007	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
I.S. EN 50130-5:2011	ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
I.S. EN 61169-49:2014	RADIO-FREQUENCY CONNECTORS - PART 49: SECTIONAL SPECIFICATION FOR SMAA SERIES R.F CONNECTORS
I.S. EN 50483-1:2009	TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 1: GENERALITIES
CEI EN 60384-16 : 2006	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
PREN 50528 : DRAFT 2008	INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS
EN 50849:2017	Sound systems for emergency purposes
BS EN 61000-4-14 : 1999	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
I.S. EN 60393-5:2016	POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 5: SECTIONAL SPECIFICATION - SINGLE-TURN ROTARY LOW-POWER WIREWOUND AND NONWIREWOUND POTENTIOMETERS
I.S. EN 61189-2:2006	TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES
I.S. EN 60746-1:2003	EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
I.S. EN 61076-3-122:2017	CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS
CEI EN 61076-3 : 2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION
I.S. EN 61189-5-503:2017	TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARD AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-503: GENERAL TEST METHOD FOR MATERIALS AND ASSEMBLIES - CONDUCTIVE ANODIC FILAMENTS (CAF) TESTING OF CIRCUIT BOARDS
I.S. EN 61111:2009	LIVE WORKING - ELECTRICAL INSULATING MATTING
S.R. CLC/TS 50131-11:2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 11: HOLD-UP DEVICES
I.S. EN 60384-24:2015	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
I.S. EN 61169-16:2007	RADIO-FREQUENCY CONNECTORS - PART 16: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 7 MM (0,276 IN) WITH SCREW COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (75 OHMS) (TYPE N)
OVE/ONORM EN 60384-11 : 2008	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
I.S. EN 165000-1:1998	FILM AND HYBRID INTEGRATED CIRCUITS - PART 1: GENERIC SPECIFICATION CAPABILITY APPROVAL PROCEDURE
I.S. EN 62674-1:2012	HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT (IEC 62674-1:2012 (EQV))
I.S. EN 61076-4-116:2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 4-116: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR A HIGH-SPEED TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION
I.S. EN 62676-3:2015	VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 3: ANALOG AND DIGITAL VIDEO INTERFACES
I.S. EN 60603-7:2009	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008)
I.S. EN 61076-2-104:2014	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING
I.S. EN 61169-26:2013	RADIO-FREQUENCY CONNECTORS - PART 26: SECTIONAL SPECIFICATION FOR TNCA SERIES RF COAXIAL CONNECTORS (IEC 61169-26:2013 (EQV))
I.S. EN 62093:2005	BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS
I.S. CLC TS 50131-4:2006	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
I.S. EN 61076-4-110:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
I.S. EN 62813:2015	LITHIUM ION CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - TEST METHODS FOR ELECTRICAL CHARACTERISTICS
I.S. EN 60068-2-20:2008	ENVIRONMENTAL TESTING - PART 2-20: TESTS - TEST T: TEST METHODS FOR SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT OF DEVICES WITH LEADS
I.S. EN 60068-2-69:2017	ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD
CEI EN 61000-5-7 : 2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-7: INSTALLATION AND MITIGATION GUIDELINES - DEGREES OF PROTECTION BY ENCLOSURES AGAINST ELECTROMAGNETIC DISTURBANCES (EM CODE)
I.S. EN 61076-1:2006/A1:2019	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
PREN 54-29 : DRAFT 2009	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE AND HEAT SENSORS
I.S. EN 60747-5-5:2011	SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
CEI EN 62137-1-1 : 2008	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST
CEI EN 60068-2-54 : 2007	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST TA: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS BY THE WETTING BALANCE METHOD
CEI EN 60068-2-6 : 2009	ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
I.S. EN 50131-2-7-3:2012/A2:2016	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
I.S. EN 61180-2:1995	HIGH VOLTAGE TEST TECHNIQUE FOR LOW-VOLTAGE EQUIPMENT - PART 2: TEST EQUIPMENT
BS EN 61587-1:2017	Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
I.S. EN 61076-4-104:1999	CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GRID OF 2.0 MM WITH TERMINATIONS ON A MULTIPLE GRID OF 0.5 MM
PREN 54-22 : DRAFT 2011	FIRE DETECTION AND FIRE ALARM SYSTEM - PART 22: RESETTABLE LINE TYPE HEAT DETECTORS
I.S. EN 54-3:2014	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
15/30296472 DC : 0	BS EN 54-7 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
I.S. EN 50130-4:2011	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
I.S. EN 54-24:2008	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
CEI EN 60352-1 : 1998	SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
I.S. EN 60512-16-21:2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-21: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16U: WHISKER TEST VIA THE APPLICATION OF EXTERNAL MECHANICAL STRESSES (IEC 60512-16-21:2012 (EQV))
CEI EN 60115-9 : 2005	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTOR NETWORKS WITH INDIVIDUALLY MEASURABLE RESISTORS
CEI EN 61300-2-20 : 1997	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-20: TESTS - CLIMATIC SEQUENCE
CEI 13-26 : 1999	WATT-HOUR METERS AND POWER LIMITERS FOR LOW-VOLTAGE NETWORKS (INTEGRATED UNITS) PERMITTED OR NOT FOR PROCESSING AND REMOTE MANAGEMENT OF DATA
I.S. EN 62341-5:2009	ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
CEI EN 62391-2 : 2006	FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION
UNE-EN 62852:2015	Connectors for DC-application in photovoltaic systems - Safety requirements and tests
CEI EN 60068-2-1 : 2007	ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD
DIN EN 60068-2-69 : 2007	ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD (IEC 60068-2-69:2017)
I.S. EN 61180:2016	HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS, TEST EQUIPMENT
UNE-EN 50508:2011	Multi-purpose insulating sticks for electrical operations on high voltage installations
CEI EN 61988-2-4 : 2012	PLASMA DISPLAY PANELS - PART 2-4: MEASURING METHODS - VISUAL QUALITY: IMAGE ARTIFACTS
EN 60384-1:2016	Fixed capacitors for use in electronic equipment - Part 1: Generic specification
I.S. EN 60068-2-27:2009	ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
I.S. EN 60384-23:2015	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
I.S. EN 61243-1:2005	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
I.S. EN 61112:2009	LIVE WORKING - ELECTRICAL INSULATING BLANKETS
I.S. EN 61020-1:2009	ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 54-16:2008	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT
I.S. EN 62137-1-3:2009	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST
I.S. EN 62391-2:2006	FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION
I.S. EN 61076-3-110:2016	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ
I.S. EN 60068-2-38:2009	ENVIRONMENTAL TESTING - PART 2-38: TESTS - TEST Z/AD: COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST
I.S. EN 60068-2-47:2005	ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS
I.S. EN 62391-1:2016	FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62137:2005	ENVIRONMENTAL AND ENDURANCE TESTING - TEST METHODS FOR SURFACE-MOUNT BOARDS OF AREA ARRAY TYPE PACKAGES FBGA, BGA, FLGA, LGA, SON AND QFN
I.S. EN 61169-1:2013	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
I.S. EN 50131-2-5:2008	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-5: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND ULTRASONIC DETECTORS
I.S. EN 60664-1:2007	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
DIN EN 54-13:2014-09 (Draft)	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS
I.S. EN 60268-7:2011	SOUND SYSTEM EQUIPMENT - PART 7: HEADPHONES AND EARPHONES
I.S. EN 60068-2-78:2013	ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE (IEC 60068-2-78:2012 (EQV))
I.S. EN 61189-6:2006	TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 6: TEST METHODS FOR MATERIALS USED IN MANUFACTURING ELECTRONIC ASSEMBLIES
EN 61169-1:2013/AC:2016-02	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
EN 60938-1:1999/A1:2007	FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
EN 60539-1:2016/AC:2017-09	DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017)
EN 61076-4-116:2012/A1:2016	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 4-116: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR A HIGH-SPEED TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION (IEC 61076-4-116:2012/A1:2015)
EN 60115-1:2011/A11:2015	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
EN 60352-2:2006/A1:2013	SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
EN 60352-5:2012/AC:2014	SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012)
DIN EN 45501:2016-03	METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
DIN EN 12101-10:2006-01	SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES
BS EN 54-12:2015	Fire detection and fire alarm systems Smoke detectors. Line detectors using an optical beam
BS EN 12101-10:2005	Smoke and heat control systems Power supplies
BS EN 54-23:2010	Fire detection and fire alarm systems Fire alarm devices. Visual alarm devices
BS EN 61984:2009	Connectors. Safety requirements and tests
EN 62852:2015	Connectors for DC-application in photovoltaic systems - Safety requirements and tests
UNE-EN 60839-11-1:2014	Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements
UNE-EN 61730-2:2007	Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
EN 50134-3:2012/AC:2015	Alarm systems - Social alarm systems - Part 3: Local unit and controller
UNE-EN 50131-2-7-2:2013	Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
BS EN 61215:2005	Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval
EN 61000-4-25 : 2002 AMD 1 2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001/A1:2012)
BS EN 54-5 : 2017	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS
BS EN 54-2 : 1998	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
DIN EN 54-12:2015-10	Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
IEC 61811-54:2002	Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base
BS EN 54-11:2001	Fire detection and fire alarm systems Manual call points
BS EN 12094-1:2003	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for electrical automatic control and delay devices
BS EN 140402-801:2015	Detail specification: Fixed low power wirewound surface mount (SMD) resistors. Rectangular. Stability classes 0,5; 1; 2
BS EN 54-20:2006	Fire detection and fire alarm systems Aspirating smoke detectors
BS EN 50521 : 2009	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
DIN EN 54-20:2009-02	Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors (includes Amendment AC:2008)
08/30179116 DC : DRAFT MAR 2008	BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
DIN EN 54-18:2006-03	Fire detection and fire alarm systems - Part 18: Input/output devices
12/30248102 DC : 0	BS EN 14604 - SMOKE ALARM DEVICES
UNE-EN 50131-2-7-3:2013	Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
IEC 61076-2-102:2002	Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply
EN 61811-1:2015	Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification
EN 61337-2:2004	Filters using waveguide type dielectric resonators - Part 2: Guidance for use
EN 62576:2010	Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics
CLC/TS 50131-2-10:2014	Alarm systems - Intrusion and hold-up systems - Part 2-10: Intrusion detectors - Lock state contacts (magnetic)
EN 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
EN 175301-803:2006	Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable
EN 62137-1-1 : 2007	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST
EN 61481:2001/A2:2005	LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C.
EN 61811-52:2002	Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base
EN 62271-204:2011	High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
EN 60862-1:2015	Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
CLC/TS 50467 : 2008 COR 2008	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
EN 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
EN 60068-2-75:2014	Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 54-26:2015	Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors - Point detectors
EN 54-29:2015	Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors
EN 54-21:2006	Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
EN 54-23:2010	Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
EN 14154-2:2005+A2:2011	Water meters - Part 2: Installation and conditions of use
EN 54-28:2016	Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
EN 15964:2011	Breath alcohol test devices other than single use devices - Requirements and test methods
EN 54-3:2014	Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
EN 54-24:2008	Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers
EN 14637:2007	Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance
EN 54-16:2008	Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
EN 54-27:2015	Fire detection and fire alarms systems - Part 27: Duct smoke detectors
EN 45510-2-7:2002	Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
EN 14154-3:2005+A2:2011	Water meters - Part 3: Test methods and equipment
EN 15267-3:2007	Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
EN 54-31:2014+A1:2016	Fire detection and fire alarm systems - Part 31: Multi-sensor fire detectors - Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors
EN 54-30:2015	Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors
EN 16280:2012	Breath alcohol test devices for general public - Requirements and test methods
EN 60793-2-40:2016	Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres
PREN 50539-11 : DRAFT 2010	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
PREN 50131-10 : DRAFT 2011	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT)
BS EN 60440:2012	Method of measurement of non-linearity in resistors
UNE-EN 60068-3-1:2012	Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
BS EN 61000-4-2:2009	Electromagnetic compatibility (EMC) Testing and measurement techniques. Electrostatic discharge immunity test
BS EN 61000-4-16:2016	Electromagnetic compatibility (EMC) Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
CEI EN 61988-4 : 2008	PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
BS EN 60068-2-58 : 2015	ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD)
BS EN 60068-5-2:2000	Environmental testing. Guide to drafting of test methods Terms and definitions
DD CLC/TS 50131-2-7-3:2009	Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (active)
DIN EN 54-23:2010-06	Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
UNE-EN 50528:2011	Insulating ladders for use on or near low voltage electrical installations
I.S. EN 61196-10:2016	COAXIAL COMMUNICATION CABLES - PART 10: SECTIONAL SPECIFICATION FOR SEMI-RIGID CABLES WITH POLYTETRAFLUOROETHYLENE (PTFE) DIELECTRIC
I.S. EN 50131-2-3:2008	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS
EN 61587-1:2017	Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
CEI EN 61076-2-101 : 2013	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING
I.S. EN 60758:2016	SYNTHETIC QUARTZ CRYSTAL - SPECIFICATIONS AND GUIDELINES FOR USE
I.S. EN 54-29:2015	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE AND HEAT SENSORS
BS EN 62137-4:2014	Electronics assembly technology Endurance test methods for solder joint of area array type package surface mount devices
BS EN 61076-5:2001	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications In-line sockets with assessed quality. Sectional specification
BS EN 60393-6:2016	Potentiometers for use in electronic equipment Sectional specification. Surface mount preset potentiometers
BS EN 61169-26:2013	Radio-frequency connectors Sectional specification for TNCA series RF coaxial connectors
04/30116868 DC : DRAFT JUL 2004	EN 175301-803 - DETAIL SPECIFICATION - RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE
BS EN 54-29:2015	Fire detection and fire alarm systems Multi-sensor fire detectors. Point detectors using a combination of smoke and heat sensors
I.S. EN 61076-4-114:2003	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM
DIN EN 54-30:2015-11	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS
BS EN 60393-5:2016	Potentiometers for use in electronic equipment Sectional specification. Single-turn rotary low-power wirewound and non-wirewound potentiometers
CEI EN 62391-1 : 2016	FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60212:2011	Standard conditions for use prior to and during the testing of solid electrical insulating materials
CEI EN 61270-1 : 1997	CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL
CEI EN 50131-2-7-3 : 2013	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
I.S. EN 60728-13:2010	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS
PREN 50132-5-3 : DRAFT 2010	ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION
CEI EN 60068-2-82 : 2008	ENVIRONMENTAL TESTING - PART 2-82: TESTS - TEST TX: WHISKER TEST METHODS FOR ELECTRONIC AND ELECTRIC COMPONENTS
CEI EN 60115-2 : 2016	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
17/30371001 DC : 0	BS EN 4864 - AEROSPACE SERIES - ENVIRONMENTAL TESTING - HIGH DYNAMIC ABRASION, MAR, SCRATCH AND PUNCH TEST IN CABIN INTERIOR
BS EN 62341-6-1:2011	Organic light emitting diode (OLED) displays Measuring methods of optical and electro-optical parameters
10/30218198 DC : 0	BS EN 50132-5-3:2010 - ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION
CEI EN 50131-3 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT
CEI EN 61076-3-117 : 2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-117: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 14 RELATED TO IEC 61076-3-106 - PUSH PULL COUPLING
09/30208429 DC : 0	BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS EN 50132-4-1:2001	Alarm systems. CCTV surveillance systems for use in security applications Black and white monitors
BS EN 60115-8:2012	Fixed resistors for use in electronic equipment Sectional specification. Fixed surface mount resistors
BS EN 60393-1:2009	Potentiometers for use in electronic equipment Generic specification
I.S. EN 61811-51:2002	ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 51: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - NON-STANDARDIZED TYPES AND CONSTRUCTION
BS EN 61189-3:2008	Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards)
BS EN 50528:2010	Insulating ladders for use on or near low voltage electrical installations
BS EN 60728-13:2010	Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions
CEI EN 60115-8 : 2013	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
CEI EN 60384-14 : 2014	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
BS EN 61020-1:2009	Electromechanical switches for use in electrical and electronic equipment Generic specification
UNE-EN 50130-5:2011	Alarm systems - Part 5: Environmental test methods
BS EN 60068-2-38:2009	Environmental testing Tests. Test Z/AD. Composite temperature/humidity cyclic test
08/30188489 DC : DRAFT AUG 2008	BS EN 54-27 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS
UNE-EN 61180:2017	High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
04/30105620 DC : DRAFT OCT 2004	EN 54-21 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 21: ALARM TRANSMISSION AND FAULT WARNING ROUTING EQUIPMENT
I.S. EN 62790:2015	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
CEI EN 62137-1-2 : 2008	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST
PREN 54-25 : DRAFT 2015	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
CEI EN 61076-3-110 : 2013	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ
CEI CLC/TS 50131-11 : 2013	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 11: HOLD-UP DEVICES
BS EN 61811-51:2002	Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Non-standardized types and construction
CEI EN 60212 : 2012	STANDARD CONDITIONS FOR USE PRIOR TO AND DURING THE TESTING OF SOLID ELECTRICAL INSULATING MATERIALS
CEI EN 61076-4-104 : 2001	CONNECTORS FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GIRD OF 2,0 MMS WITH TERMINATIONS ON A MULTIPLE GIRD OF 0,5 MM
BS EN 61730-2 : 2007	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
BS EN 60115-9:2004	Fixed resistors for use in electronic equipment Sectional specification. Fixed surface mount resistor networks with individually measurable resistors
BS EN 61988-2-1:2012	Plasma display panels Measuring methods. Optical and optoelectrical
BS EN 61753-111-9:2010	Fibre optic interconnecting devices and passive components performance standard Sealed closures for category S. Subterranean
BS EN 61076-4-107:2001	Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
BS EN 60728-6:2011	Cable networks for television signals, sound signals and interactive services Optical equipment
DIN EN 54-27:2015-05	Fire detection and fire alarm systems - Part 27: Duct smoke detectors
I.S. EN 62271-204:2011	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGE ABOVE 52 KV (IEC 62271-204:2011 (EQV))
BS EN 60793-2-40:2016	Optical fibres Product specifications. Sectional specification for category A4 multimode fibres
BS EN 54-26:2015	Fire detection and fire alarm systems Carbon monoxide detectors. Point detectors
BS EN 61753-111-8:2010	Fibre optic interconnecting devices and passive components performance standard Sealed closures for category G. Ground
BS EN 62025-2:2005	High frequency inductive components. Non-electrical characteristics and measuring methods Test methods for non-electrical characteristics
BS EN 61000-4-19:2014	Electromagnetic compatibility (EMC) Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
BS EN 50467:2011	Railway applications. Rolling stock. Electrical connectors, requirements and test methods
CEI EN 50131-2-2 : 2008	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS
I.S. EN 50131-2-7-2:2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
I.S. EN 62024-2:2009	HIGH FREQUENCY INDUCTIVE COMPONENTS - ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: RATED CURRENT OF INDUCTORS FOR DC TO DC CONVERTERS
UNE-EN 60068-2-53:2011	Environmental testing -- Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
I.S. EN 60440:2012	METHOD OF MEASUREMENT OF NON-LINEARITY IN RESISTORS (IEC 60440:2012 (EQV))
I.S. EN 61076-7-100:2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
BS EN 61810-5:1999	Electromechanical non-specified time all-or-nothing relays Insulation coordination
BS EN 61076-2-113:2017	Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
BS EN 61076-2-104:2014	Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors with M8 screw-locking or snap-locking
CEI EN 50131-2-5 : 2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-5: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND ULTRASONIC DETECTORS
BS EN 54-24:2008	Fire detection and fire alarm systems Components of voice alarm systems. Loudspeakers
CEI EN 61643-331 : 2005	COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 331: SPECIFICATION FOR METAL OXIDE VARISTORS (MOV)
10/30218152 DC : 0	BS EN 50539-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
CEI EN 175301-803 : 2007	DETAIL SPECIFICATION: RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE
07/30162638 DC : 0	BS 50131-2-3 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS
BS EN 61988-2-4:2011	Plasma display panels Measuring methods. Visual quality. Image artifacts
BS EN 60384-11:2008	Fixed capacitors for use in electronic equipment Sectional specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
BS EN 60068-2-69:2017	Environmental testing Tests. Test Te/Tc. Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
BS EN 62271-204:2011	High-voltage switchgear and controlgear Rigid gas-insulated transmission lines for rated voltage above 52 kV
BS EN 50132-5-3:2012	Alarm systems. CCTV surveillance systems for use in security applications Video transmission. Analogue and digital video transmission
BS EN 60068-2-64:1995	Environmental testing. Test methods Test Fh. Vibration, broad-band random (digital control) and guidance
BS EN 60384-3:2006	Fixed capacitors for use in electronic equipment Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
BS EN 61076-3-104:2017	Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
BS EN 61169-52:2015	Radio-frequency connectors Sectional specification for series MMCX RF coaxial connectors
BS EN 50134-3:2012	Alarm systems. Social alarm systems Local unit and controller
I.S. EN 61481:2001	LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C.
BS EN 62197-1:2006	Connectors for electronic equipment. Quality assessment requirements Generic specification
BS EN 60068-2-81:2003	Environmental testing. Test methods Test Ei. Shock. Shock response spectrum synthesis
BS EN 61000-4-8:2010	Electromagnetic compatibility (EMC) Testing and measurement techniques. Power frequency magnetic field immunity test
CEI EN 60068-2-9 : 2001	ENVIRONMENTAL TESTING - PART 2: TESTS GUIDANCE FOR SOLAR RADIATION TESTING
I.S. EN 61210:2010	CONNECTING DEVICES - FLAT QUICK-CONNECT TERMINATIONS FOR ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS
BS EN 60384-17:2005	Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
UNE-EN 50131-4:2010	Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
07/30162643 DC : DRAFT AUG 2007	BS EN 50131-2-5 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-5: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND ULTRASONIC DETECTORS
I.S. EN 60393-2:2016	POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS
BS EN 60068-2-39:2016	Environmental testing Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BS EN 61076-4-100:2002	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
CEI EN 60068-2-69 : 2008	ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD
15/30291072 DC : 0	BS EN 54-28 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESETTABLE LINE TYPE HEAT DETECTORS
BS EN 61076-4-114:2003	Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
06/30159668 DC : 0	BS EN 50508 - MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
I.S. EN 62496-2-2:2011	OPTICAL CIRCUIT BOARDS - PART 2-2: MEASUREMENTS - DIMENSIONS OF OPTICAL CIRCUIT BOARDS
I.S. EN 62604-1:2015	SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
UNE-EN 61000-4-2:2010	Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
S.R. CLC/TS 50131-2-7-1:2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
CEI EN 50130-5 : 2012	ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
CEI EN 60539-1 : 2009	DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
I.S. EN 60529:1993	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
UNE-EN 61210:2011	Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
PREN 54-3 : DRAFT 2009	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
BS EN 60068-2-5:2011	Environmental testing Tests. Test Sa. Simulated solar radiation at ground level and guidance for solar radiation testing
I.S. EN 60384-8:2015	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
OVE/ONORM EN 50131-2-2 : 2008	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS
CEI EN 60384-23 : 2016	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
I.S. EN 62137-1-1:2007	SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST
CEI EN 175301-801 : 2007	DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS
I.S. EN 61076-2-102:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY
CEI EN 60130-9 : 2012	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
BS EN 170000:1999	Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators
I.S. EN 61076-3:2008	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION
I.S. EN 50521:2008	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
BS EN 60384-23:2015	Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
I.S. EN 61000-4-2:2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
I.S. EN IEC 60728-3:2018	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS (TA 5)
I.S. EN 60947-1:2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
I.S. EN 60384-26:2010	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
I.S. EN 61811-54:2002	ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 54: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 15 MM X 7,5 MM BASE
I.S. EN 61811-53:2002	ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 53: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 14 MM X 9 MM BASE
I.S. EN IEC 61076-3-119:2018	CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
I.S. EN 61965:2003	MECHANICAL SAFETY OF CATHODE RAY TUBES
I.S. EN 60384-3:2016	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
UNE-EN 50548:2012	Junction boxes for photovoltaic modules
I.S. EN 54-31:2014	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 31: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE, CARBON MONOXIDE AND OPTIONALLY HEAT SENSORS
CEI EN 60384-8 : 2016	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
I.S. EN 61270-1:1999	CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL
I.S. EN 61481-1:2014	LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
CEI EN 60068-2-38 : 2012	ENVIRONMENTAL TESTING - PART 2-38: TESTS - TEST Z/AD: COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST
DIN EN 54-5:2001-03	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS
CEI EN 60352-7 : 2003	SOLDERLESS CONNECTIONS - PART 7: SPRING CLAMP CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
CEI EN 60068-2-41 : 2000	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS
I.S. EN 60862-1:2015	SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN IEC 61076-2-111:2018	CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING
I.S. EN 61811-11:2003	ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 11: BLANK DETAIL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION
BS EN 61000-4-13 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002)
CLC/TS 50131-2-7-3:2009	Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
I.S. EN 54-27:2015	FIRE DETECTION AND FIRE ALARMS SYSTEMS - PART 27: DUCT SMOKE DETECTORS
S.R. CLC/TS 50131-2-8:2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS
I.S. EN 61811-1:2015	ELECTROMECHANICAL TELECOM ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION AND BLANK DETAIL SPECIFICATION
I.S. EN 61076-2-113:2017	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ
DIN EN 54-24:2008-06	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
BS EN 50131-4:2009	Alarm systems. Intrusion and hold-up systems Warning devices
I.S. EN 61760-4:2015	SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES
I.S. EN 61169-8:2007	RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC)
I.S. EN 61000-4-28:2000	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-28: TESTING AND MEASUREMENT TECHNIQUES - VARIATION OF POWER FREQUENCY, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
BS EN 60068-2-21:2006	Environmental testing Tests. Test U: Robustness of terminations and integral mounting devices
NF EN 50130-4 : 2014 AMD 1 2014	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
I.S. EN 60947-5-4:2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-4: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - METHODS OF ASSESSING THE PERFORMANCE OF LOW ENERGY CONTACTS - SPECIAL TESTS
ONORM EN 54-7 : 2006	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
CEI EN 60384-21 : 2013	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
NF EN 50548 : 2011 AMD 2 2014	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
EN IEC 60728-3:2018	Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5)
CEI EN 60068-2-20 : 2009	ENVIRONMENTAL TESTING - PART 2-20: TESTS - TEST T: TEST METHODS FOR SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT OF DEVICES WITH LEADS
CEI EN 60512-16-21 : 2013	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-21: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16U: WHISKER TEST VIA THE APPLICATION OF EXTERNAL MECHANICAL STRESSES
CEI EN 61076-4-105 : 2001	CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR 9 MM CIRCULAR CONNECTOR WITH 3 TO 8 CONTACTS FOR USE IN A WIDE RANGE OF APPLICATIONS INCLUDING THE TELECOMMUNICATION= AND AUDIO INDUSTRY
CEI EN 60939-1 : 2011	PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
PREN 50548 : DRAFT 2009	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
CEI EN 61988-2-5 : 2013	PLASMA DISPLAY PANELS - PART 2-5: MEASURING METHODS - ACOUSTIC NOISE
CEI EN 62813 : 2016	LITHIUM ION CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - TEST METHODS FOR ELECTRICAL CHARACTERISTICS
I.S. EN 60793-2-40:2016	OPTICAL FIBRES - PART 2-40: PRODUCT SPECIFICATIONS - SECTIONAL SPECIFICATION FOR CATEGORY A4 MULTIMODE FIBRES
CEI EN 50131-4 : 2010	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
I.S. EN 60384-4:2016	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
I.S. EN 15964:2011	BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
I.S. EN 61076-3-114:2009	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE
I.S. EN 62197-1:2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
I.S. EN 61730-2:2007	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004 (MOD))
I.S. EN 61811-52:2002	ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 52: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 20 MM X 10 MM BASE
I.S. EN 60384-9:2015	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
I.S. EN 61076-4-108:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 61643-331:2003	COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 331: SPECIFICATION FOR METAL OXIDE VARISTORS (MOV)
I.S. EN 60068-2-40:1999	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS
I.S. EN 60384-13:2012	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (IEC 60384-13:2011 (EQV))
I.S. EN 61076-6:2004	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 6: LOOSE PART CONTACTS - SECTIONAL SPECIFICATION
I.S. EN 116000-3:1998	GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES
I.S. EN 60068-2-1:2007	ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD
I.S. EN 60068-2-58:2015	ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD)
I.S. EN 60539-1:2016	DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
EN 61076-3-104:2017	Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
EN 60747-5-5:2011/A1:2015	SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013)
EN 60512-26-100:2008/A1:2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G
EN 60384-24:2015/AC:2017-01	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (IEC 60384-24:2015/COR1:2016)
BS EN 54-13:2017	Fire detection and fire alarm systems Compatibility and connectability assessment of system components
BS EN 54-4:1998	Fire detection and fire alarm systems Power supply equipment
BS EN 15267-3:2007	Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
BS EN 14604:2005	Smoke alarm devices
BS EN 54-3:2014	Fire detection and fire alarm systems Fire alarm devices. Sounders
BS EN 61646:2008	Thin-film terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for materials for interconnection structures
EN 50548 : 2011 AMD 2 2014	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
DIN EN 14154-3:2011-06	WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
EN 61076-4-100:2001	Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
EN 61076-4-115:2003	Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
EN 60603-2:1998/A1:2005	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
EN 61076-2-101:2012	Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
EN 50508:2009	Multi-purpose insulating sticks for electrical operations on high voltage installations
EN 61076-3-115:2010	Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type
EN 50132-5:2001	Alarm systems - CCTV surveillance systems for use in security applications - Part 5: Video transmission
EN 61988-2-3:2009	Plasma display panels - Part 2-3: Measuring methods - Image quality: defects and degradation
EN 61811-55:2002	Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base
EN 50521:2008/A1:2012	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
EN 60793-1-60:2017	Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length
EN 62341-6-1:2011	Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters
EN 61169-8:2007	Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC)
EN 61076-2-109:2014	Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz
EN 61076-3-110:2016	Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
EN 61000-4-2:2009	Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN 61984:2009	Connectors - Safety requirements and tests
EN 60068-2-78:2013	Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 61757-1 : 2012	FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012)
EN 60384-9:2015	Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
EN 61076-4-107:2001	Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
EN 61169-16:2007	Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms) (type N)
EN 60793-1-61:2017	Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk
EN 61811-11:2003	Electromechanical elementary relays of assessed quality - Part 11: Blank detail specification - Relays for industrial application
EN 61076-3-100:2000	Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
EN 60130-9:2011	Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
EN 61076-3:2008	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION
EN 61811-53:2002	Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base
EN 61270-1:1996	Capacitors for microwave ovens - Part 1: General
EN 50131-3:2009	Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment
EN 61169-48:2015	Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F. coaxial connectors
CLC/TS 50131-11:2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 11: HOLD-UP DEVICES
EN 60068-3-5:2002	Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
EN 61508-7:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
EN 60115-9:2004	Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors
EN 61243-2:1997/A2:2002	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
EN 60512-23-7:2005	Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
DIN EN 54-21:2006-08	Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
EN 60068-2-39:2016	Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
EN 61481-2:2014	Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
EN 61000-4-17:1999/A2:2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-17: TESTING AND MEASUREMENT TECHNIQUES - RIPPLE ON D.C. INPUT POWER PORT IMMUNITY TEST
DIN EN 54-28:2016-07	Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
EN 60107-1:1997	Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies
EN 61210:2010	Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
EN 61000-4-16:2016	Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
EN 61248-1 : 1997	Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
EN 61000-4-14:1999/A2:2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
EN 60068-2-57:2013	Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method
EN 60068-2-6:2008	Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
EN 60393-6:2016	Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers
EN 60947-5-4:2003	Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
EN 60068-2-55:2013	Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce
EN 60384-11:2008	Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
EN 60068-2-80:2005	Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
EN 61000-4-21:2011	Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods
EN 12094-1:2003	Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
EN 60115-8:2012	Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
EN 60728-6:2011	Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
EN 61988-2-2:2003	Plasma display panels - Part 2-2: Measuring methods - Optoelectrical
DIN EN 14637:2008-01	Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance
EN 60384-16:2005	Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
EN 60368-1:2000/A1:2004	PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
EN 60352-8:2011	Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance
EN 61076-3-117:2009	Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling
EN 61000-4-19:2014	Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
EN 61191-6:2010	Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method
EN 60143-4 : 2010	SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
EN 60352-1:1997	Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
EN 62391-2:2006	Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification - Electric double-layer capacitors for power application
EN 50131-2-7-3:2012/A2:2016	Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
EN 61076-2-102:2002	Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply
EN 60068-2-83 : 2011	ENVIRONMENTAL TESTING - PART 2-83: TESTS - TEST TF: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS FOR SURFACE MOUNTING DEVICES (SMD) BY THE WETTING BALANCE METHOD USING SOLDER PASTE (IEC 60068-2-83:2011)
EN 60939-2:2005	Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements
EN 50132-4-1 : 2001	ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 4-1: BLACK AND WHITE MONITORS
EN 62575-1:2016	Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification
EN 50131-2-6:2008	Alarm systems - Intrusion and hold-up systems - Part 2-6: Opening contacts (magnetic)
EN 61988-2-4:2011	Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts
EN 61076-6 : 2004	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 6: LOOSE PART CONTACTS - SECTIONAL SPECIFICATION
EN 165000-1:1996	Film and hybrid integrated circuits - Part 1: Generic specification - Capability approval procedure
EN 62137-4:2014/AC:2015	ELECTRONICS ASSEMBLY TECHNOLOGY - PART 4: ENDURANCE TEST METHODS FOR SOLDER JOINT OF AREA ARRAY TYPE PACKAGE SURFACE MOUNT DEVICES (IEC 62137-4:2014)
EN 61076-2-107 : 2010	Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
EN 50131-2-7-2 : 2012 AMD 2 2016	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
EN 50131-2-3:2008	Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors
EN 60393-5:2016	Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and nonwirewound potentiometers
EN 60440:2012	Method of measurement of non-linearity in resistors
EN 62093:2005	Balance-of-system components for photovoltaic systems - Design qualification natural environments
EN 61646:2008	THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
EN 60384-21:2012	Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
EN 50467:2011	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
EN 60068-2-27:2009	Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
EN 50483-1:2009	Test requirements for low voltage aerial bundled cable accessories - Part 1: Generalities
EN 61076-2-105:2008	Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
EN 60212:2011	Standard conditions for use prior to and during the testing of solid electrical insulating materials
EN 116000-3 : 1996	GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES
EN 60068-2-54:2006	Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method
EN 61076-4-104:1999	Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
EN 60384-4:2016	Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
DIN EN 54-16:2008-06	Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
OVE/ONORM EN 62025-2 : 2005	HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS
EN 45501 : 2015	METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
EN 60068-2-53:2010	Environmental testing - Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
EN 61881-3:2012/A1:2013	RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012/A1:2013)
EN 61189-5 : 2006	TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES
EN 62676-3:2015	Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces
EN 170000:1999	Generic Specification: Waveguide type dielectric resonators
EN 50131-2-5:2008	Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors
EN 60068-2-64:2008	ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
EN 50131-2-7-1:2012/A2:2016	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
EN 61338-1:2005	Waveguide type dielectric resonators - Part 1: Generic specification
EN 60068-2-82:2007	Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components
EN 61076-3-106 : 2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE
CLC/TS 50131-4:2006	Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
EN 60115-8-1:2015	Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
EN 61076-3-120:2016	Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
EN 60068-2-58:2015/A1:2018	ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) (IEC 60068-2-58:2015/A1:2017)
EN 60384-17:2005	Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
EN 62391-1:2016/AC:2016-12	FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 62391-1:2015/COR1:2016)
EN 61076-2-001:2011	Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
EN 60068-3-1:2011	Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
EN 60384-19:2015	Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
EN 60393-2:2016	Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers
EN 61169-40:2011	Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors
EN 50131-4:2009	Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
EN 60127-6:2014	Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 62193:2003	Live working - Telescopic sticks and telescopic measuring sticks
EN 60849:1998	Sound systems for emergency purposes
EN 60393-1:2009	Potentiometers for use in electronic equipment - Part 1: Generic specification
EN 62025-2:2005	High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
EN 170100:2001	Sectional Specification: Waveguide type dielectric resonators
EN 60068-3-8:2003	Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
EN 60384-26:2010	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
EN 61189-3:2008	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
EN 60512-16-21:2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-21: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16U: WHISKER TEST VIA THE APPLICATION OF EXTERNAL MECHANICAL STRESSES
EN 60384-15:2017	Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
EN 61076-3-118 : 2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
EN 61020-1:2009	Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
EN 60749 : 99 AMD 2 2001	SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS
EN 61988-4 : 2007	PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
I.S. EN 15267-3:2007	AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 3: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR MONITORING EMISSIONS FROM STATIONARY SOURCES
OVE/ONORM EN 62093 : 2006	BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS

IEC 60068-2-27:2008	Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-20:2008	Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
IEC 60068-3-1:2011	Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
ISO 3205:1976	Preferred test temperatures
IEC 60068-2-38:2009	Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC TR 62130:2012	Climatic field data including validation
ISO 554:1976	Standard atmospheres for conditioning and/or testing — Specifications
IEC 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

EN 60068-1:2014

Environmental testing - Part 1: General and guidance

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory