EN 547-3:1996+A1:2008
Current
Current
The latest, up-to-date edition.
Safety of machinery - Human body measurements - Part 3: Anthropometric data
Published date
09-24-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 General requirements
4 Anthropometric data
4.1 Human body measurements (anthropometric
data from European surveys)
4.2 Descriptions of human body measurements
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC, amended by 98/79/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
This European Standard specifies current requirements for human body measurements (anthropometric data) that are required by EN 547-1 and EN 547-2 for the calculation of access opening dimensions as applied to machinery.The anthropometric data originate from static measurements of nude persons and do not take into account body movements, clothing, equipment, machinery operating conditions or environmental conditions.The data are based on information from anthropometric surveys representative of population groups within Europe comprising at least three million people. Both men and women are taken into account.Measurements are given, as required by EN 547-1 and EN 547-2, for the 5th, 95th and 99th percentiles of the relevant population group within Europe.
| Committee |
CEN/TC 122
|
| DevelopmentNote |
1996 Edition Re-Issued in September 2008 & incorporates AMD 1 2008. (11/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| AS/NZS 4024.1704:2014 | Identical |
| AS/NZS 4024:2019 Series | Identical |
| GOST R EN 547-3 : 2009 | Identical |
| NBN EN 547-3 : 1997 + A1 2009 | Identical |
| I.S. EN 547-3:1996+A1:2008 | Identical |
| UNI EN 547-3 : 2009 | Identical |
| I.S. EN 547-3:1997 | Identical |
| BS EN 547-3 : 1997 | Identical |
| DIN EN 547-3:2009-01 | Identical |
| NEN EN 547-3 : 1997 + A1 2008 | Identical |
| NS EN 547-3 : 1996 + A1 2008 | Identical |
| PN EN 547-3 : 2000 + A1 2010 | Identical |
| SN EN 547-3+A1:2008 | Identical |
| UNE-EN 547-3:1997 | Identical |
| NF EN 547-3 : 1997 + A1 2008 | Identical |
| UNE-EN 547-3:1997+A1:2008 | Identical |
| BS EN 547-3:1996+A1:2008 | Identical |
| IEC TS 61496-4-2:2014 | Safety of machinery - Electro-sensitive protective equipment - Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using reference pattern techniques (VBPDPP) |
| BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| 12/30244749 DC : 0 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 12415:2000 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| 14/30303750 DC : 0 | BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS |
| S.R. CEN TR 614-3:2010 | SAFETY OF MACHINERY - PART 3: ERGONOMIC PRINCIPLES FOR THE DESIGN OF MOBILE MACHINERY |
| 03/300531 DC : DRAFT FEB 2003 | EN 614-1 - SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| 03/119040 DC : DRAFT NOV 2003 | PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| 09/30202532 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 17/30358016 DC : 0 | BS EN ISO 13857 - SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| EN 16282-7:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 7: Installation and use of fixed fire suppression systems |
| I.S. EN 13128:2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| DIN EN ISO 13857:2008-06 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY THE UPPER AND LOWER LIMBS (ISO 13857:2008) |
| 03/313810 DC : 0 | EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| 05/30107773 DC : DRAFT FEB 2005 | EN ISO 15536-2 - ERGONOMICS - COMPUTER MANIKINS AND BODY TEMPLATES - PART 2: VERIFICATION OF FUNCTIONS AND VALIDATION OF DIMENSIONS FOR COMPUTER MANIKIN SYSTEMS |
| DIN EN 894-4:2010-11 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators |
| 02/561276 DC : DRAFT MAR 2002 | BS 1005-4 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| 12/30244743 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 15/30333173 DC : 0 | BS EN 4730 - AEROSPACE SERIES - ANTHROPOMETRIC DIMENSIONING OF AIRCRAFT SEATS |
| 05/30129947 DC : 0 | EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
| 10/30185766 DC : 0 | BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| ISO 11148-13:2017 | Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools |
| BS EN ISO 13857:2008 | Safety of machinery. Safety distances to prevent hazard zones being reached by upper and lower limbs |
| I.S. EN 16282-5:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| I.S. EN 16282-2:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS |
| PREN 16282-1 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| DIN EN 13118:2010-01 | Agricultural machinery - Potato harvesting equipment - Safety (includes Amendment A1:2009) |
| BS EN 14466 : 2005 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| BS EN 13128 : 2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| BS EN 1005-4 : 2005 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| BS EN 1889-1:2011 | Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles |
| BS EN 12321 : 2003 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| BS EN 614-1 : 2006 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| BS EN 1034-1 : 2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS |
| BS EN 13118 : 2000 | AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY |
| I.S. EN 14010:2004 | |
| CEN/TR 15563:2007 | Temporary works equipment - Recommendations for achieving health and safety |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
| EN 12717:2001+A1:2009 | Safety of machine tools - Drilling machines |
| EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
| EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
| EN 12478:2000/AC:2001 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 13118:2000+A1:2009 | Agricultural machinery - Potato harvesting equipment - Safety |
| UNI EN 1034-1 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| DIN EN 15955-2:2013-09 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| CEI EN 50308 : 2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| PREN 16282-5 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| I.S. EN 12151:2007 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| DIN EN 15164:2008-09 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES |
| PREN 1889-1 : DRAFT 2010 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| 11/30244195 DC : 0 | BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS |
| DIN EN 16327:2014-07 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
| 02/561267 DC : DRAFT MAR 2002 | PREN 14386 - SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES FOR THE OPERABILITY OF MOBILE MACHINERY |
| PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| CSA ISO 13857 : 2015 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| I.S. EN 15164:2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES |
| I.S. EN 15746-2:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| EN 16282-1:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 1: General requirements including calculation method |
| I.S. EN 15955-2:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNE-EN 16327:2015 | Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
| UNE-EN 16282-4:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; Design and safety requirements |
| I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 792-13:2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| DIN EN 1010-1:2011-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010) |
| DIN EN 12321:2009-07 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| DIN EN 1005-2:2009-05 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| DIN EN 1005-1:2009-04 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| DIN EN 13128:2009-09 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| DIN EN 14010:2009-12 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009) |
| DIN EN 14466:2008-09 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests (includes Amendment A1:2008) |
| BS EN ISO 15536-2:2007 | Ergonomics. Computer manikins and body templates Verification of functions and validation of dimensions for computer manikin systems |
| BS EN 12629-6 : 2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS |
| I.S. EN 1005-1:2002 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| I.S. EN 12717:2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| I.S. EN 12629-6:2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS |
| I.S. EN 13118:2001 | AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY |
| I.S. EN 1028-1:2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| I.S. EN 614-1:2006 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| I.S. EN 1915-1:2013 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| I.S. EN 12629-1:2000 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
| DIN EN 1034-1:2010-12 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010) |
| I.S. EN 1034-1:2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| I.S. EN 617:2001 | |
| I.S. EN 1889-1:2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| I.S. EN 14466:2005 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| I.S. EN 14710-1:2005 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 1010-1:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| DIN EN 13788:2002-04 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| I.S. EN 1889-2:2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| I.S. EN 12321:2003 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| UNI EN 15746-2 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| PD ISO/TR 22100-3:2016 | Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards |
| BS EN 50308:2004 | Wind turbines. Protective measures. Requirements for design, operation and maintenance |
| UNI EN ISO 13857 : 2008 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| I.S. EN 13788:2002 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| 14/30303762 DC : 0 | BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING |
| BS EN 16282-5:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air duct. Design and dimensioning |
| I.S. EN 12840:2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| BS EN 16282-4:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air inlets and outlets; design and safety requirements |
| 14/30303753 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| 09/30202538 DC : DRAFT JUN 2009 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| BS EN 15164:2008 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines |
| 04/30109749 DC : DRAFT JUL 2004 | ISO 9355-4 - ERGONOMIC REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| UNE-EN 16282-2:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements |
| 96/104565 DC : JUN 96 | EN 12437-3 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 3: STAIRWAYS, STEPLADDERS AND GUARDRAILS |
| BS EN 16282-8:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing |
| UNI EN 16327 : 2014 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
| PD IEC/TS 61496-4-2:2014 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using reference pattern techniques (VBPDPP) |
| PD CEN/TR 15563:2017 | Temporary works equipment. Recommendations for achieving health and safety |
| 00/562569 DC : DRAFT JUN 2000 | BS EN 13921-1 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 1: GENERAL REQUIREMENTS FOR THE DESIGN AND THE SPECIFICATION |
| I.S. CEN TR 15563:2007 | TEMPORARY WORKS EQUIPMENT - RECOMMENDATIONS FOR ACHIEVING HEALTH AND SAFETY |
| EN 957-7:1998 | Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test methods |
| NF EN 15746-2 : 2010 + A1 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 16282-1:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| I.S. EN 50308:2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| ISO/TR 22100-3:2016 | Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards |
| UNE-EN 16282-3:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements |
| I.S. EN 16282-3:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS |
| DIN EN 12629-6:2011-02 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products (includes Amendment A1:2010) |
| DIN EN 1005-4:2009-01 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| DIN EN 547-1:2009-01 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY |
| DIN EN 547-2:2009-01 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS |
| DIN EN 12717:2009-07 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN 12629-1:2011-01 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements (includes Amendment A1:2010) |
| DIN EN ISO 11064-3:2000-09 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 3: CONTROL ROOM LAYOUT |
| UNE-EN 15954-2:2014 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| BS EN 12629-1 : 2001 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNE-EN 1889-1:2012 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| UNE-EN 15955-2:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| BS EN 1010-1 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| DIN EN 1889-1:2011-10 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| BS EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar. Safety requirements |
| I.S. EN 1005-4:2005 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| I.S. EN 547-1:1997 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY |
| I.S. EN 547-2:1997 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS |
| I.S. EN 1005-2:2003 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| UNE-EN 792-13:2001 | HAND-HELD NON-ELECTRIC POWER TOOLS. SAFETY REQUIREMENTS. PART 13: FASTENER DRIVING TOOLS. |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN 792-13:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools |
| UNI EN 1005-4 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| UNI EN 12581 : 2010 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNI EN 14710-1 : 2009 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 12629-6 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS |
| UNI EN 1889-1 : 2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN 13118 : 2010 | AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY |
| UNI EN 547-1 : 2009 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY |
| UNI EN 614-1 : 2009 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| UNI EN 547-2 : 2009 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS |
| UNI EN 15954-2 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| EN 617:2001+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
| UNI EN 617 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
| UNI EN 1028-1 : 2008 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 12417 : 2009 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| UNI EN 14466 : 2008 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| UNI EN 792-13 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| UNI EN 12629-1 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN 1915-1 : 2014 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| EN 894-4:2010 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| UNI EN 12321 : 2009 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| I.S. EN ISO 11064-3:1999 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 3: CONTROL ROOM LAYOUT |
| UNI EN 1889-2 : 2009 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| UNI EN 15955-2 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 1005-1 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| UNI EN 14010 : 2009 | SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES |
| UNI EN 13128 : 2009 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| UNI EN 12717 : 2009 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| UNI EN 1005-2 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| UNI EN 15164 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES |
| PREN 16282-7 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS |
| I.S. EN ISO 13857:2008 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| 07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
| I.S. EN 16282-8:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING |
| 11/30244204 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| 04/19985587 DC : 0 | BS EN 894-4 - SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| 15/30264711 DC : 0 | BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| BS EN 15954-2:2013 | Railway applications. Track. Trailers and associated equipment General safety requirements |
| 07/30172833 DC : DRAFT DEC 2007 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| PREN 16282-3 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS |
| I.S. EN 12478:2000 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| PREN 614-1 : DRAFT 2003 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| BS EN 16282-3:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements |
| 04/30123607 DC : DRAFT OCT 2004 | EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| BS EN 894-4:2010 | Safety of machinery. Ergonomics requirements for design of displays and control actuators Location and arrangement of displays and control actuators |
| EN 1034-1:2000+A1:2010 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
| 14/30303741 DC : 0 | BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| PD IEC/TS 61496-4-3:2015 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using stereo vision techniques (VBPDST) |
| BS EN 16327:2014 | Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
| 14/30303747 DC : 0 | BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS |
| BS EN 16282-1:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens General requirements including calculation method |
| BS EN 16282-2:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements |
| BS EN 15955-2:2013 | Railway applications. Track. Demountable machines and associated equipment General safety requirements |
| DIN EN 15746-2:2016-02 (Draft) | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015 |
| 11/30244207 DC : 0 | BS EN 16282-6 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS - DESIGN AND SAFETY REQUIREMENTS |
| 14/30303759 DC : 0 | BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS |
| 03/112610 DC : DRAFT AUG 2003 | EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY |
| I.S. EN 894-4:2010 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| I.S. EN 16282-7:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS |
| I.S. EN 15954-2:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 16282-4:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS |
| PREN 16282-8 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING |
| ISO 20957-7:2005 | Stationary training equipment Part 7: Rowing machines, additional specific safety requirements and test methods |
| ISO 7076-5:2014 | Fire protection Foam fire extinguishing systems Part 5: Fixed compressed air foam equipment |
| UNE-EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| DIN EN 792-13:2009-01 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| DIN EN 617:2011-06 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010) |
| BS EN 547-2 : 1997 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS |
| BS EN 547-1 : 1997 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY |
| BS EN 1028-1 : 2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 1005-1 : 2001 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| BS EN 1889-2 : 2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| BS EN 14710-1 : 2005 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| BS EN ISO 11064-3:2000 | Ergonomic design of control centres Control room layout |
| BS EN 12717 : 2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| ISO 11064-3:1999 | Ergonomic design of control centres — Part 3: Control room layout |
| ISO 15536-2:2007 | Ergonomics Computer manikins and body templates Part 2: Verification of functions and validation of dimensions for computer manikin systems |
| BS EN 792-13 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| BS EN 14010 : 2003 | |
| UNE-EN 617:2002 | Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers. |
| BS EN 957-7:1999 | Stationary training equipment Rowing machines, additional specific safety requirements and test methods |
| BS EN 12415:2001 | Safety of machine tools. Small numerically controlled turning machines and turning centres |
| BS EN 13788:2002 | Machine tools. Safety. Multi-spindle automatic turning machines |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| EN 13788 : 2001 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| EN 14466:2005+A1:2008 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| EN 15164:2008 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines |
| EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
| EN 16282-5:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EN ISO 15536-2:2007 | Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007) |
| EN 1889-1:2011 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| EN 14710-1:2005+A2:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN 1889-2:2003+A1:2009 | Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
| EN 14010:2003+A1:2009 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| EN 16327:2014 | Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
| EN 1028-1:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements |
| EN 16282-8:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing |
| I.S. EN 16327:2014 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
| UNI EN 894-4 : 2010 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| 11/30244198 DC : 0 | BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS |
| 14/30303756 DC : 0 | BS EN 16282-6 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS; DESIGN AND SAFETY REQUIREMENTS |
| 02/540559 DC : DRAFT JULY 2002 | EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| PREN 16282-4 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS |
| 11/30244192 DC : 0 | BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| 11/30244210 DC : 0 | BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS |
| BS EN 16282-7:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installation and use of fixed fire suppression systems |
| 03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
| 03/306594 DC : DRAFT APR 2003 | BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE |
| 03/306595 DC : 0 | BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| 14/30258503 DC : 0 | BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| DIN EN 15954-2:2013-11 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| 14/30303744 DC : 0 | BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS |
| PD CEN/TR 614-3:2010 | Safety of machinery Ergonomic principles for the design of mobile machinery |
| 11/30244201 DC : 0 | BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS |
| 11/30244213 DC : 0 | BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES - REQUIREMENTS AND TESTING |
| PREN 16282-2 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS |
| PREN 4730 : DRAFT 2017 | AEROSPACE SERIES - ANTHROPOMETRIC DIMENSIONING OF AIRCRAFT SEATS |
| BS EN 15746-2 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 15/30279801 DC : 0 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| IEC TS 61496-4-3:2015 | Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using stereo vision techniques (VBPDST) |
| DIN EN ISO 15536-2:2007-06 | ERGONOMICS - COMPUTER MANIKINS AND BODY TEMPLATES - PART 2: VERIFICATION OF FUNCTIONS AND VALIDATION OF DIMENSIONS FOR COMPUTER MANIKIN SYSTEMS |
| DIN EN 1028-1:2008-09 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements (includes Amendment A1:2008) |
| DIN EN 614-1:2009-06 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN 1889-2:2009-07 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
| BS EN 617 : 2001 | |
| BS EN 1915-1:2013 | Aircraft ground support equipment. General requirements Basic safety requirements |
| BS EN 1005-2 : 2003 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| EN 12415:2000/A1:2002 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 12629-6:2004+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
| EN 50308 : 2004 COR 2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| CEN/TR 614-3:2010 | Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery |
| DIN EN 14710-1:2009-06 | Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements |
| EN 12629-1:2000+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements |
| EN 12321:2003+A1:2009 | Underground mining machinery - Specification for the safety requirements of armoured face conveyors |
| EN 12840 : 2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| DIN EN 12151:2008-05 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| DIN EN 15746-2:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011) |
| UNE-EN 12629-6:2005 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
| UNE-EN 15746-2:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| UNE-EN 12629-1:2001 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FORM CONCRETE AND CALCIUM-SILICATE. SAFETY. PART 1: COMMON REQUIREMENTS |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.