EN 50575:2014/A1:2016
Current
Current
The latest, up-to-date edition.
POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
Amendment of
Published date
03-25-2016
Sorry this product is not available in your region.
European foreword
Foreword to amendment 1
1 Scope
2 Normative references
3 Terms and definitions
4 Product characteristics
5 Test methods for reaction to
fire classes
6 Assessment and verification of constancy
of performance - AVCP
7 Marking, labelling and packaging
Annex ZZ (informative) - Clauses of this European
Standard addressing the provisions of the EU
Construction Products Regulation
Bibliography
This amendment covers the following changes : - amend the paragraph on relation to other regulation than CPR in the Foreword - amend Table ZZ.2 by an AVCP system for the intended use "for uses subject to regulations on dangerous substances".
| Committee |
TC 20
|
| DevelopmentNote |
Supersedes PREN 50575. (09/2014)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 50575 : 2014 AMD 1 2016 | Identical |
| I.S. EN 50575:2014 | Identical |
| NF EN 50575 : 2014 AMD 1 2017 | Identical |
| PN-EN 50575: 2015-03 / A1: 2016-11 | Identical |
| PN-EN 50575:2015-03/A1:2016-11 | Identical |
| SN EN 50575 : 2014 + A1 2016 | Identical |
| PN EN 50575 : 2015 AMD 1 2016 | Identical |
| NBN EN 50575 : 2014 AMD 1 2016 | Identical |
| DIN EN 50575 : 2017 | Identical |
| VDE 0482-575 : 2017 | Identical |
| BS EN 50575 : 2014 | Identical |
| BS EN 50575:2014+A1:2016 | Identical |
| S.R. CLC/TS 50576:2016 | ELECTRIC CABLES - EXTENDED APPLICATION OF TEST RESULTS FOR REACTION TO FIRE |
| UNE-EN 50290-4-1:2016 | Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
| UNE 211067-2:2017 | Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 400 kV (Um = 420 kV). Part 2: Cables with XLPE insulation and polyolefin compound sheath or high density polyethylene (HDPE) compound sheath. |
| UNE 211632-4A:2017 | Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV). Part 4A: Cables with XLPE insulation and polyolefin compound sheath (Types 1, 2 and 3) or high density polyethylene (HDPE) compound sheath. |
| UNE-HD 603-5X:2007 | Distribution cables of rated voltage 0,6/1 kV. Part 5: XLPE insulated cables unarmoured. Section X: Polyolefin sheathed cables without concentric conductor (Type 5X-1) |
| UNE-CLC/TS 50576:2017 | Electric cables - Extended application of test results for reaction to fire |
| BS EN 50290-4-2:2014 | Communication cables General considerations for the use of cables. Guide to use |
| UNE-HD 603-5N:2007 | Distribution cables of rated voltage 0,6/1 kV. Part 5: XLPE insulated cables unarmoured. Section N: PVC sheathed cables without concentric conductor. (Type 5N) |
| ESPECIFICACION UNE 0051:2017 | Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV. HPTE insulated single core cables and single core pre-assembled cables. Cables with polyolefine compound sheath (type 1 and type 3). |
| ESPECIFICACION UNE 0052:2017 | Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV. HPTR insulated single core cables and single core pre-assembled cables. Cables with polyolefine compound sheath (type 1, type 2 and type 3). |
| BS EN 50290-4-1:2014 | Communication cables General considerations for the use of cables. Environmental conditions and safety aspects |
| PREN 13501-6 : DRAFT 2017 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
| I.S. EN 50290-4-1:2014 | COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS |
| UNE-HD 620-10E:2012 | Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV. Part 10: XLPE insulated single core and 3 core cables, and single core pre-assembled cables. Section E: Cables with polyolefine compound sheath (types 10E-1, 10E-3, 10E-4 and 10E-5). |
| UNE-HD 620-9E:2012 | Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV. Part 9: HEPR insulated single core cables, and single core pre-assembled cables. Section E: Cables with polyolefine compound sheath (types 9E-1, 9E-3, 9E-4 and 9E-5). |
| 17/30348256 DC : 0 | BS EN 13501-6 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
| PD CLC/TS 50576:2016 | Electric cables - Extended application of test results for reaction to fire |
| I.S. EN 50290-4-2:2014 | COMMUNICATION CABLES - PART 4-2: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - GUIDE TO USE |
| UNE-EN 50290-4-2:2016 | Communication cables - Part 4-2: General considerations for the use of cables - Guide to use |
| UNE 211632-6A:2017 | Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV). Part 6A: Cables with HEPR insulation and polyolefin compound sheath (Types 1, 2 and 3) or high density polyethylene (HDPE) compound sheath. |
| EN 50290-4-1:2014 | Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
| EN 50290-4-2:2014 | Communication cables - Part 4-2: General considerations for the use of cables - Guide to use |
| CLC/TS 50576:2016 | Electric cables - Extended application of test results for reaction to fire |
| CEI EN IEC 60794-2-50:2023 | Optical fibre cables Part 2-50: Indoor cables Family specification for simplex and duplex cables for use in terminated cable assemblies |
| EN 50399 : 2011 AMD 1 2016 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
| EN 60754-2:2014 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| 305/2011 : 2011 AMD 2 2014 | REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE) |
| EN 13501-6:2014 | Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables |
| ISO 13943:2017 | Fire safety — Vocabulary |
| EN 60332-1-2:2004/A11:2016 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004/A1:2015) |
| IEC 60332-1-2:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
| EN 61034-2:2005/A1:2013 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS (IEC 61034-2:2005/A1:2013) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60754-2:2011 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
| EN ISO 13943:2017 | Fire safety - Vocabulary (ISO 13943:2017) |
| CLC/TS 50576:2016 | Electric cables - Extended application of test results for reaction to fire |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| IEC 61034-2:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.