EN 50559:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electric room heating, underfloor heating, characteristics of performance - Definitions, method of testing, sizing and formula symbols
05-16-2020
05-03-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Method of testing for the determination of
characteristics of performance
Annex A (informative) - Sizing Procedure - Range
of application and purpose
Annex B (informative) - Sizing procedure - Examples
of sizing procedure of an underfloor storage
heating system - Example for a living area
Annex C (informative) - Sizing procedure - Example
of sizing procedure of an underfloor direct
heating system - Example for a living area
Formula symbols and units
Bibliography
This European Standard applies to electrical underfloor heating of dwellings and all other buildings whose use corresponds to dwellings or is at least similar, having a maximum load bearing in use of 4 kN/m². This European Standard defines the main characteristics of electrical underfloor heating and establishes the method of testing of these characteristics as information for the user. This European Standard does not deal with: -installation and safety requirements; DIN VDE 0100-723.
| Committee |
CLC/TC 59X
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 50559:2013 | Identical |
| OVE/ONORM EN 50559 : 2014 | Identical |
| BS EN 50559 : 2015 | Identical |
| SN EN 50559:2013 | Identical |
| I.S. EN 50559:2013 | Identical |
| DIN EN 50559 : 2013 | Identical |
| CEI EN 50559 : 2014 | Identical |
| NEN EN 50559 : 2013 | Identical |
| NBN EN 50559 : 2013 | Identical |
| I.S. EN 50559:2013/A1:2020 | Identical |
| VDE 0705-559 : 2013 | Identical |
| PN EN 50559 : 2013 | Identical |
| NF EN 50559:2013 | Identical |
| BS EN 50559:2013 | Identical |
| EN 1264-4:2009 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| EN 1264-3:2009 | Water based surface embedded heating and cooling systems - Part 3: Dimensioning |
| IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
| DIN VDE 0100-723 : 2005 | ERECTION OF LOW-VOLTAGE INSTALLATIONS - REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - PART 723: CLASS-ROOMS WITH EXPERIMENTAL EQUIPMENT |
| EN 1264-5:2008 | Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output |
| EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
| EN 50350:2004 | Charging control systems for household electric room heating of the storage type - Methods for measuring performance |
| EN 12098-4:2005 | Controls for heating systems - Part 4: Optimum start-stop control equipment for electrical systems |
| EN 60335-2-96:2002/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-96: PARTICULAR REQUIREMENTS FOR FLEXIBLE SHEET HEATING ELEMENTS FOR ROOM HEATING |
| EN 1264-2:2008+A1:2012 | Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 60800:2009 | Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation |
| IEC 60335-2-96:2002+AMD1:2003+AMD2:2008 CSV | Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating |
| EN 12098-3:2017 | Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8 |
| EN 1264-1:2011 | Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols |
| EN 50366 : 2003 AMD 1 2006 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - ELECTROMAGNETIC FIELDS - METHODS FOR EVALUATION AND MEASUREMENT |
| EN 12831:2003 | Heating systems in buildings - Method for calculation of the design heat load |
| EN 14337:2005 | Heating Systems in buildings - Design and installation of direct electrical room heating systems |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.