EN 50160 : 2010 AMD 1 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
Amendment of
Superseded date
03-22-2022
Superseded by
Published date
01-16-2015
Sorry this product is not available in your region.
1 Scope and object
2 Normative references
3 Terms and definitions
4 Low-voltage supply characteristics
5 Medium-voltage supply characteristics
6 High-voltage supply characteristics
Annex A (informative) - Special nature of electricity
Annex B (informative) - Indicative values for voltage events
and single rapid voltage changes
Bibliography
Annex ZA (informative) - A-deviations
Describes the main characteristics of the voltage at a network user's supply terminals in public low voltage, medium and high voltage AC electricity networks under normal operating conditions.
| Committee |
TC 8X
|
| DevelopmentNote |
COR 2012 is available in French only. (01/2013)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 50160:2011 | Identical |
| DS/EN 50160:2010/A3:2015 | Identical |
| SN EN 50160 : 2010 | Identical |
| BS EN 50160 : 2010 | Identical |
| NEN EN 50160 : 2010 AMD 1 2015 | Identical |
| NF EN 50160 : 2011 AMD 1 2015 | Identical |
| I.S. EN 50160:2010 | Identical |
| DIN EN 50160:2011-02 | Identical |
| PN EN 50160 : 2010 AMD 1 2015 | Identical |
| CEI 110-22 V1 : 2005 | Identical |
| NBN EN 50160 : 2010 AMD 1 2015 | Identical |
| OVE/ONORM EN 50160 : 2011 AMD 1 2016 | Identical |
| CEI EN 50160/A1:2015 | Identical |
| I.S. EN 50160:2010/A1:2015 | Identical |
| EN 61000-4-30:2015/AC:2017-01 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS (IEC 61000-4-30:2015/COR1:2016) |
| PD IEC/TR 62510:2008 | Standardising the characteristics of electricity |
| DD CLC/TS 50535:2010 | Railway applications. Onboard auxiliary power converter systems |
| BS EN 60939-1:2010 | Passive filter units for electromagnetic interference suppression Generic specification |
| CEI EN 61869-6 : 1ED 2017 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| 15/30314070 DC : 0 | BS EN 16450 - AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5) |
| 09/30214359 DC : 0 | BS EN 50533 - RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| 13/30284844 DC : 0 | BS EN 16644 - PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - NOISE TEST CODE (VIBRO-ACOUSTICS) FOR MEASURING STRUCTURE - AND FLUID-BORNE |
| UNE-EN 61000-4-30:2015 | Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods |
| IEC 60850:2014 | Railway applications - Supply voltages of traction systems |
| I.S. CLC TR 50422:2005 | GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160 |
| I.S. EN 15859:2010 | AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES |
| 09/30214220 DC : 0 | BS IEC TR 61000-2-5 ED - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS |
| BS EN 50533 : 2011 | RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| BS EN 61000-4-30:2015 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Power quality measurement methods |
| PREN 12405-3 : DRAFT 2013 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| PD CLC/TR 50646:2015 | Railway Application. Fixed Installations. Specification for reversible d.c. substations |
| 07/30166909 DC : DRAFT AUG 2007 | BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| CSA C60044-8 : 2007 : R2016 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| S.R. CLC/TR 50669:2017 | INVESTIGATION RESULTS ON ELECTROMAGNETIC INTERFERENCE IN THE FREQUENCY RANGE BELOW 150 KHZ |
| I.S. EN 60939-3:2015 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE |
| IEC 62427:2007 | Railway applications - Compatibility between rolling stock and train detection systems |
| I.S. EN 61869-6:2016 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| I.S. EN 15714-2:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| I.S. EN 16450:2017 | AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5) |
| I.S. EN 50090-5-1:2005 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-1: MEDIA AND MEDIA DEPENDENT LAYERS - POWER LINE FOR HBES CLASS 1 |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| UNE-EN 15267-4:2018 | Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 16644:2014 | PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - NOISE TEST CODE (VIBRO-ACOUSTICS) FOR MEASURING STRUCTURE- AND FLUID-BORNE NOISE |
| I.S. EN 60939-1:2010 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| BS EN 15267-3:2007 | Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources |
| EN 16644:2014 | Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise |
| EN 60939-1:2010 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| EN 16297-1:2012 | Pumps - Rotodynamic pumps - Glandless circulators - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI) |
| EN 12405 : 2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| EN 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| EN 50530 : 2010 AMD 1 2013 | OVERALL EFFICIENCY OF GRID CONNECTED PHOTOVOLTAIC INVERTERS |
| 12/30268003 DC : 0 | BS EN 60939-3 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: HARMONIZED STANDARD FOR PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE |
| PD CEN/TS 16450:2013 | Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| BS EN 50617-1:2015 | Railway applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Track circuits |
| 11/30245021 DC : 0 | BS EN 16297-1 - PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) |
| 08/30185866 DC : DRAFT JULY 2008 | BS EN 61000-3-15 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-15: LIMITS - ASSESSMENT OF LOW FREQUENCY ELECTROMAGNETIC IMMUNITY AND EMISSION REQUIREMENTS FOR DISPERSED GENERATION SYSTEMS IN LV NETWORK |
| PREN 12405-1 : DRAFT 2017 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 03/318491 DC : DRAFT OCT 2003 | EN 50163 - RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| 08/30180966 DC : DRAFT APR 2008 | BS EN 50160 - VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC DISTRIBUTION NETWORKS |
| I.S. EN 12405:2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| CLC/TR 50422:2013 | GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160 |
| PD CLC/TR 50669:2017 | Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz |
| DIN EN 15267-4:2015-08 (Draft) | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES |
| CEI EN 50308 : 2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| BS EN 15859:2010 | Air quality. Certification of automated dust arrestment plant monitors for use on stationary sources. Performance criteria and test procedures |
| DIN EN 16297-1:2013-04 | PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) |
| UNI CEN/TS 16450 : 2013 | AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5) |
| BS EN 16450:2017 | Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| CEI EN 50438 : 2014 | REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS |
| CEI EN 50090-5-1 : 2005 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-1: MEDIA AND MEDIA DEPENDENT LAYERS - POWER LINE FOR HBES CLASS 1 |
| UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
| CSA C60044-8 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| PREN 50330-1 : DRAFT 99 | PHOTOVOLTAIC SEMICONDUCTOR CONVERTERS - PART 1: UTILITY INTERACTIVE FAIL SAFE PROTECTIVE INTERFACE FOR PV-LINE COMMUTATED CONVERTERS - DESIGN QUALIFICATION AND TYPE APPROVAL |
| BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
| IEC TR 61000-2-5:2017 | Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
| EN 50647:2017 | Basic standard for the evaluation of workers' exposure to electric and magnetic fields from equipment and installations for the production, transmission and distribution of electricity |
| I.S. EN 50600-2-2:2014 | INFORMATION TECHNOLOGY - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 2-2: POWER DISTRIBUTION |
| I.S. EN 50156-1:2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| I.S. EN 15267-4:2017 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES |
| S.R. CLC/TS 50549-2:2015 | REQUIREMENTS FOR GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH DISTRIBUTION NETWORKS - PART 2: CONNECTION TO A MV DISTRIBUTION NETWORK |
| CLC/TR 50555:2010/AC:2011 | INTERRUPTION INDEXES |
| NF EN 15859 : 2010 | AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES |
| BS EN 50600-2-2:2014 | Information technology. Data centre facilities and infrastructures Power distribution |
| S.R. CLC/TS 50535:2010 | RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| S.R. CLC/TS 50457-1:2008 | CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: D.C. CHARGING STATION |
| DIN EN 15267-3:2008-03 | Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| 17/30354643 DC : 0 | BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION |
| OVE/ONORM EN 50090-5-1 : 2005 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-1: MEDIA AND MEDIA DEPENDENT LAYERS - POWER LINE FOR HBES CLASS 1 |
| DIN EN 12405:2003-10 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| UNE-EN 16450:2017 | Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| CLC/TS 50535:2010 | Railway applications - Onboard auxiliary power converter systems |
| BS EN 61869-6:2016 | Instrument transformers Additional general requirements for low-power instrument transformers |
| I.S. EN 50438:2013 | REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS |
| 13/30289289 DC : 0 | BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| PD CLC/TR 50555:2010 | Interruption indexes |
| BS EN 16297-1:2012 | Pumps. Rotodynamic pumps. Glandless circulators. General requirements and procedures for testing and calculation of energy efficiency index (EEI) |
| BS EN 50308:2004 | Wind turbines. Protective measures. Requirements for design, operation and maintenance |
| 17/30356406 DC : 0 | BS EN 17116-2 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS |
| PREN 50617-1 : DRAFT 2013 | RAILWAYS APPLICATIONS - BASIC PARAMETERS OF TRAIN DETECTION SYSTEMS - PART 1: TRACK CIRCUITS |
| BS EN 15267-4:2017 | Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| BS EN 50090-5-1:2005 | Home and building electronic systems (HBES) Media and media dependent layers. Power line for HBES Class 1 |
| BS EN 50438:2013 | Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks |
| 99/240939 DC : DRAFT MAR 99 | BS EN 50330-1 PHOTOVOLTAIC SEMICONDUCTOR CONVERTORS - PART 1: UTILITY INTERACTIVE FAIL SAFE PROTECTIVE INTERFACE FOR PV-LINE COMMUTATED CONVERTORS - DESIGN QUALIFICATION AND TYPE APPROVAL |
| 04/30124466 DC : DRAFT OCT 2004 | EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| BS EN 15714-2:2009 | Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements |
| CSA C61000-4-30 : 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
| DD IEC/PAS 62001:2004 | Guide to the specification and design evaluation of a.c. filters for HVDC systems |
| UNI EN 15859 : 2010 | AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES |
| NF EN 60044-8 : 2006 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS |
| CSA C60044-8 :2007 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| S.R. CLC/TR 50646:2015 | RAILWAY APPLICATION - FIXED INSTALLATIONS - SPECIFICATION FORREVERSIBLE D.C. SUBSTATIONS |
| EN IEC 62933-2-1:2018 | Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
| I.S. EN 50550:2011 | POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP) |
| UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
| PD CLC/TR 50422:2013 | Guide for the application of the European Standard EN 50160 |
| I.S. HD 384.1:2002 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 1: SCOPE, OBJECT AND FUNDAMENTAL PRINCIPLES |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| S.R. CLC/TR 50555:2010 | INTERRUPTION INDEXES |
| PD IEC/TR 61000-2-5:2017 | Electromagnetic compatibility (EMC) Environment. Description and classification of electromagnetic environments |
| I.S. EN IEC 62933-2-1:2018 | ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION |
| S.R. CLC/TS 50549-1:2015 | REQUIREMENTS FOR GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH DISTRIBUTION NETWORKS - PART 1: CONNECTION TO A LV DISTRIBUTION NETWORK ABOVE 16 A |
| I.S. EN 50308:2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| CLC/TS 50457-1:2008 | Conductive charging for electric vehicles - Part 1: D.C. charging station |
| 17/30356403 DC : 0 | BS EN 17116-3 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 3: CONTINUOUS TUNNEL WASHER |
| ES 202 706-1 : 1.5.1 | ENVIRONMENTAL ENGINEERING (EE); METRICS AND MEASUREMENT METHOD FOR ENERGY EFFICIENCY OF WIRELESS ACCESS NETWORK EQUIPMENT; PART 1: POWER CONSUMPTION - STATIC MEASUREMENT METHOD |
| CLC/TR 50627:2015 | Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz |
| S.R. CLC/TR 50627:2015 | STUDY REPORT ON ELECTROMAGNETIC INTERFERENCE BETWEEN ELECTRICAL EQUIPMENT/SYSTEMS IN THE FREQUENCY RANGE BELOW 150 KHZ |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| IEC PAS 62001:2004 | Guide to the specification and design evaluation of a.c. filters for HVDC systems |
| I.S. EN 50163:2004 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| IEC 62933-2-1:2017 | Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
| IEC 61000-4-19:2014 | Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
| EN 50600-2-2:2014 | Information technology - Data centre facilities and infrastructures - Part 2-2: Power distribution |
| UNI EN 16297-1 : 2012 | PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) |
| BS EN 50530 : 2010 | OVERALL EFFICIENCY OF GRID CONNECTED PHOTOVOLTAIC INVERTERS |
| 08/30184648 DC : DRAFT SEP 2008 | BS EN 15859 - AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES |
| CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
| BS EN 60939-3:2015 | Passive filter units for electromagnetic interference suppression Passive filter units for which safety tests are appropriate |
| CEI CLC/TR 50422 : 2015 | GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160 |
| CEI CLC/TS 50535 : 2011 | RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS |
| EN 15714-2:2009 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| CEI CLC/TS 50534 : 2011 | RAILWAY APPLICATIONS - GENERIC SYSTEM ARCHITECTURES FOR ONBOARD ELECTRIC AUXILIARY POWER SYSTEMS |
| DD CLC/TS 50534:2010 | Railway applications. Generic system architectures for onboard electric auxiliary power systems |
| 05/30136802 DC : 0 | EN 15267-3 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 3: PERFORMANCE SPECIFICATIONS AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR MONITORING EMISSIONS FROM STATIONARY SOURCES |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| 97/703042 DC : DRAFT FEB 1997 | PREN 50275-1 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: GENERAL CONSIDERATIONS |
| UNE-EN 50617-1:2015 | Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
| UNI EN 15714-2 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 96/210385 DC : 0 | CLC/BTTF 68-6 (SEC)8 - MEASUREMENT GUIDE FOR VOLTAGE CHARACTERISTICS |
| EN 60939-3:2015/AC:2016-04 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE (IEC 60939-3:2015/COR1:2016) |
| PD CLC/TR 50627:2015 | Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz |
| 15/30318313 DC : 0 | BS EN 15267-4 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCE |
| DD IEC PAS 62543 : DRAFT 2008 | DC TRANSMISSION USING VOLTAGE SOURCED CONVERTERS |
| 04/30117565 DC : DRAFT AUG 2004 | EN 50438 - REQUIREMENTS FOR THE CONNECTION OF MICRO-COGENERATORS IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS |
| UNE-EN 50530:2011 | Overall efficiency of grid connected photovoltaic inverters |
| DD CLC/TS 50457-1:2008 | Conductive charging for electric vehicles D.C. charging station |
| CLC/TS 50549-2:2015 | Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network |
| IEEE 1250-2011 REDLINE | IEEE Guide for Identifying and Improving Voltage Quality in Power Systems |
| HD 384.1 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 1: SCOPE, OBJECT AND FUNDAMENTAL PRINCIPLES |
| UNE-EN 61000-4-19:2015 | Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
| NF EN 50550 : 2011 AMD 1 2014 | POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP) |
| I.S. EN 50533:2011 | RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| EN 50550:2011/A1:2014 | POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP) |
| TS 102 706 : 1.3.1 | ENVIRONMENTAL ENGINEERING (EE); MEASUREMENT METHOD FOR ENERGY EFFICIENCY OF WIRELESS ACCESS NETWORK EQUIPMENT |
| CEI EN 50533 : 2012 | RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| I.S. CWA 14642:2003 | CEN WORKSHOP AGREEMENT (CWA) - ELECTRICAL INTERFACE FOR DOMESTIC COGENERATION - REQUIREMENTS FOR DISTRIBUTION NETWORK CONNECTION FOR MICRO COGENERATION SYSTEMS FOR DOMESTIC USE UP TO 16 A PER PHASE IN LOW-VOLTAGE DISTRIBUTION NETWORKS |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| IEC TS 62749:2015 | Assessment of power quality - Characteristics of electricity supplied by public networks |
| IEC 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| IEC 60939-1:2010 | Passive filter units for electromagnetic interference suppression - Part 1: Generic specification |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| IEC TR 61869-103:2012 | Instrument transformers - The use of instrument transformers for power quality measurement |
| UNE-EN 16297-1:2013 | Pumps - Rotodynamic pumps - Glandless circulators - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI) |
| IEC 61000-4-30:2015 RLV | Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods |
| UNE-EN 50550:2012 | Power frequency overvoltage protective device for household and similar applications (POP) |
| 09/30212624 DC : 0 | BS EN 50550 - POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP) |
| BS EN 12405:2002 | Gas meters. Gas-volume electronic conversion devices |
| BS EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation |
| 98/203095 DC : DRAFT JULY 1998 | PRENV 50275-2-3 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 2-3: D.C. CHARGING STATION |
| 12/30260546 DC : 0 | BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| EN 50090-5-1:2005 | Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 1 |
| EN 15859:2010 | Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures |
| EN 15267-4:2017 | Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| EN 15267-3:2007 | Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources |
| NF EN 50308 : 2004 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| UNE-EN 50533:2012 | Railway applications - Three-phase train line voltage characteristics. |
| 12/30270909 DC : 0 | BS EN 50438 - REQUIREMENTS FOR THE CONNECTION OF MICRO-GENERATORS IN PARALLEL WITH PUBLIC LOW VOLTAGE DISTRIBUTION NETWORKS |
| 13/30251579 DC : 0 | BS EN 50617-1 - RAILWAYS APPLICATIONS - BASIC PARAMETERS OF TRAIN DETECTION SYSTEMS - PART 1: TRACK CIRCUITS |
| 08/30176999 DC : DRAFT JAN 2008 | BS EN 60664-2-1 - INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 2-1: APPLICATION GUIDE - EXPLANATION OF THE APPLICATION OF THE IEC 60664 SERIES, DIMENSIONING EXAMPLES AND DIELECTRIC TESTING |
| S.R. CEN/TS 16450:2013 | AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5) |
| BS EN 50163 : 2004 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| BS EN 16644:2014 | Pumps. Rotodynamic pumps. Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations. Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise |
| DIN EN 15859:2010-08 | Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures |
| PREN 50533 : DRAFT 2009 | RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| PREN 17116-2 : DRAFT 2017 | SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS |
| BS EN 61000-4-19:2014 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
| DIN EN 16644:2015-04 | PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - NOISE TEST CODE (VIBRO-ACOUSTICS) FOR MEASURING STRUCTURE- AND FLUID-BORNE NOISE |
| UNE-EN 16644:2015 | Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise |
| BS EN 50647:2017 | Basic standard for the evaluation of workers\' exposure to electric and magnetic fields from equipment and installations for the production, transmission and distribution of electricity |
| UNE-EN 15714-2:2010 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| CLC/TS 50549-1:2015 | Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network above 16 A |
| CEI CLC/TR 50555 : 2011 | INTERRUPTION INDEXES |
| 04/300967 DC : DRAFT JAN 2004 | EN 50090-5-1 ED.1 - HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-1: MEDIA AND MEDIA DEPENDENT LAYERS - POWER LINE FOR HBES CLASS 1 |
| S.R. CLC/TR 50422:2013 | GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160 |
| DIN EN 15714-2:2010-02 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| I.S. EN 16297-1:2012 | PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) |
| CLC/TS 50534:2010 | Railway applications - Generic system architectures for onboard electric auxiliary power systems |
| CSA C61000-4-30 : 2010 : R2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
| DIN EN 16450:2015-10 (Draft) | AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5) |
| NF EN 50530 : 2010 AMD 1 2013 | OVERALL EFFICIENCY OF GRID CONNECTED PHOTOVOLTAIC INVERTERS |
| I.S. EN 50647:2017 | BASIC STANDARD FOR THE EVALUATION OF WORKERS' EXPOSURE TO ELECTRIC AND MAGNETIC FIELDS FROM EQUIPMENT AND INSTALLATIONS FOR THE PRODUCTION, TRANSMISSION AND DISTRIBUTION OF ELECTRICITY |
| I.S. EN 61000-4-19:2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-19: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, DIFFERENTIAL MODE DISTURBANCES AND SIGNALLING IN THE FREQUENCY RANGE 2 KHZ TO 150 KHZ AT A.C. POWER PORTS |
| IEEE 1453-2015 REDLINE | IEEE Recommended Practice for the Analysis of Fluctuating Installations on Power Systems |
| I.S. EN 50617-1:2015 | RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 1: TRACK CIRCUITS |
| I.S. EN 61000-4-30:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
| 17/30356400 DC : 0 | BS EN 17116-4 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 4: WASHER-EXTRACTORS |
| CLC/TR 50669:2017 | Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz |
| 17/30356731 DC : 0 | BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| CEI EN 60939-1 : 2011 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| PREN 50438 : DRAFT 2012 | REQUIREMENTS FOR THE CONNECTION OF MICRO-GENERATORS IN PARALLEL WITH PUBLIC LOW VOLTAGE DISTRIBUTION NETWORKS |
| I.S. TR 50422:2004 | GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160 |
| IEC TR 62510:2008 | Standardising the characteristics of electricity |
| S.R. CLC/TS 50534:2010 | RAILWAY APPLICATIONS - GENERIC SYSTEM ARCHITECTURES FOR ONBOARD ELECTRIC AUXILIARY POWER SYSTEMS |
| IEC PAS 62543:2008 | DC transmission using voltage sourced converters |
| I.S. EN 50530:2010 | OVERALL EFFICIENCY OF GRID CONNECTED PHOTOVOLTAIC INVERTERS |
| DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| IEC TR 61000-2-5:2017 RLV | Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
| BS EN 50550 : 2011 | POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP) |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| IEC 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| EN 50308 : 2004 COR 2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| EN 16450:2017 | Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
| EN 12405-3:2015 | Gas meters - Conversion devices - Part 3: Flow computer |
| CEN/TS 16450:2013 | Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| EN 61000-4-19:2014 | Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
| EN 50533 : 2011 AMD 1 2016 | RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 50438:2013 | REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS |
| CLC/TR 50646:2015 | Railway Application - Fixed Installations - Specification for reversible d.c. substations |
| EN 50617-1:2015 | Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
| I.S. EN 15267-3:2007 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 3: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR MONITORING EMISSIONS FROM STATIONARY SOURCES |
| IEC 60038:2009 | IEC standard voltages |
| EN 61000-4-30:2015/AC:2017-01 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS (IEC 61000-4-30:2015/COR1:2016) |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| IEC 61000-2-4:2002 | Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
| EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| EN 61000-3-3:2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013) |
| EN 61000-2-4:2002/AC:2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES |
| IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV | Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control |
| EN 61000-2-2:2002/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS (IEC 61000-2-2:2002/A1:2017) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC TR 61000-2-14:2006 | Electromagnetic compatibility (EMC) - Part 2-14: Environment - Overvoltages on public electricity distribution networks |
| IEC 61000-4-15:2010 | Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications |
| IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| IEC TR 61000-3-7:2008 | Electromagnetic compatibility (EMC) - Part 3-7: Limits - Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems |
| CLC/TR 50422:2013 | GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160 |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 61000-2-2:2002+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
| IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| EN 61000-4-34:2007/A1:2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-34: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS FOR EQUIPMENT WITH MAINS CURRENT MORE THAN 16 A PER PHASE |
| IEC TR 62066:2002 | Surge overvoltages and surge protection in low-voltage a.c. power systems - General basic information |
| EN 50065-1:2011 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances |
| IEC TR 61000-2-8:2002 | Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 61000-4-15:2011 | Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications |
| IEC 61000-4-34:2005+AMD1:2009 CSV | Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.