
EN 50121-3-2:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
11-25-2019
12-23-2016
European foreword
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Performance criteria
5 Conditions during testing
6 Applicability
7 Emission tests and limits
8 Immunity requirements
Annex A (informative) - Examples of apparatus and ports
Annex B (informative) - Conducted disturbances
generated by power converters
Annex ZZ (informative) - Relationship between this
European Standard and the essential
requirements of Directive 2014/30/EU
[2014 OJ L96] aimed to be covered
Bibliography
This European Standard applies to emission and immunity aspects of EMC for electrical and electronic apparatus intended for use on railway rolling stock. EN 50121-3-2 applies for the integration of apparatus on rolling stock.The frequency range considered is from DC to 400 GHz. No measurements need to be performed at frequencies where no requirement is specified.The application of tests shall depend on the particular apparatus, its configuration, its ports, its technology and its operating conditions.This standard takes into account the internal environment of the railway rolling stock and the external environment of the railway, and interference to the apparatus from equipment such as hand-held radio-transmitters.If a port is intended to transmit or receive for the purpose of radio communication (intentional radiators, e.g. transponder systems), then the radiated emission requirement in this standard is not intended to be applicable to the intentional transmission from a radio-transmitter as defined by the ITU.Immunity limits do not apply in the exclusion bands as defined in the corresponding EMC related standard for radio equipment.This standard does not apply to transient emissions when starting or stopping the apparatus.The objective of this standard is to define limits and test methods for electromagnetic emissions and immunity test requirements in relation to conducted and radiated disturbances.These limits and tests represent essential electromagnetic compatibility requirements.Emission requirements have been selected so as to ensure that disturbances generated by the apparatus operated normally on railway rolling stock do not exceed a level which could prevent other apparatus from operating as intended. The emission limits given in this standard take precedence over emission requirements for individual apparatus on board the rolling stock given in other standards.Likewise, the immunity requirements have been selected so as to ensure an adequate level of immunity for rolling stock apparatus.The levels do not however cover all cases which may occur with an extremely low probability of occurrence in any location. Specific requirements which deviate from this standard shall be specified.Test requirements are specified for each port considered.These specific provisions are to be used in conjunction with the general provisions in EN 50121-1.
Committee |
CLC/TC 9X
|
DevelopmentNote |
Supersedes ENV 50121-3-2. (03/2005) To be read in conjunction with EN 50121-1. (09/2006) Supersedes PREN 50121-3-2. (01/2017).
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
CEI EN 50121-3-2:2018 | Identical |
I.S. EN 50121-3-2:2016 | Identical |
VDE 0115-121-3-2 : 2017 | Identical |
DIN EN 50121-3-2 : 2017 | Identical |
CEI EN 50121-3-2 : 2016 | Identical |
PN EN 50121-3-2 : 2017 | Identical |
BS EN 50121-3-2:2016 | Identical |
NEN EN 50121-3-2 : 2017 | Identical |
SN EN 50121-3-2 : 2016 | Identical |
UNE-EN 50121-3-2:2017 | Identical |
CEI EN 50121-3-2:2017 | Identical |
NBN EN 50121 3-2 : 2015 | Identical |
I.S. EN 50121-3-2:2016/A1:2019 | Identical |
CEI EN 50121-5:2018IT | Identical |
NF EN 50121-3-2 : 2017 | Identical |
ONORM OVE EN 50121-3-2 : 2017 | Identical |
I.S. EN 50463-2:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
DIN EN 15746-1:2016-02 (Draft) | Railway applications - Track - Road rail machines and associated equipment - Part 1: Technical requirements for travelling and working; German and English version prEN 15746-1:2015 |
DD CLC/TS 50535:2010 | Railway applications. Onboard auxiliary power converter systems |
PREN 14033-1 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
14/30258493 DC : 0 | BS EN 14033-1 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
DD CLC/TS 50537-2:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Pump for insulating liquid for traction transformers and reactors |
PREN 50463-3 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING |
13/30252771 DC : 0 | BS EN 50121-3-1 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-1: ROLLING STOCK - TRAIN AND COMPLETE VEHICLE |
PREN 50463-2 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
11/30209536 DC : 0 | BS EN 14752 - RAILWAY APPLICATIONS - BODYSIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
12/30244746 DC : 0 | BS EN 15955-1 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
DIN EN 15954-1:2014-06 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
09/30202535 DC : DRAFT JUN 2009 | BS EN 15955-1 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
BS EN 50311:2003 | Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps |
08/30189631 DC : DRAFT SEP 2008 | BS EN 50215 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
I.S. EN 16185-1:2014 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
CEI EN 50463-3 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING |
CEI CLC/TS 50537-2 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS |
BS EN 15746-1 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
UNE-EN 16185-1:2015 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
I.S. EN 16207:2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
DIN EN 15595:2015-11 (Draft) | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
BS EN 15595 : 2009 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
15/30279805 DC : 0 | BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
CEI EN 50215 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
UNE-EN 13977:2012 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
BS EN 50155:2017 | Railway applications. Rolling stock. Electronic equipment |
UNE-EN 15954-1:2014 | Railway applications - Track - Trailers and associated equipment - Part 1: Technical requirements for running and working |
16/30282633 DC : 0 | BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
I.S. EN 13977:2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
EN 62718:2016 | Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps |
EN 50311:2003 | Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps |
DIN EN 14033-2:2017-10 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
DIN EN 14033-1:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
12/30235292 DC : 0 | BS EN 50343 - RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
16/30340728 DC : 0 | BS EN 50121-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMISSION OF THE WHOLE RAILWAY SYSTEM TO THE OUTSIDE WORLD |
BS EN 62718:2016 | Railway applications. Rolling stock. DC supplied electronic ballasts for lighting fluorescent lamps |
UNI EN 15437-2 : 2012 | RAILWAY APPLICATIONS - AXLEBOX CONDITION MONITORING - INTERFACE AND DESIGN REQUIREMENTS - PART 2: PERFORMANCE AND DESIGN REQUIREMENTS OF ON-BOARD SYSTEMS FOR TEMPERATURE MONITORING |
DIN EN 14033-2:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
CLC/TS 50537-2:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors |
12/30235267 DC : 0 | BS EN 50125-1 - RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: EQUIPMENT ON BOARD ROLLING STOCK |
BS EN 50215:2009 | Railway applications — Rolling stock — Testing of rolling stock on completion of construction and before entry into service |
06/30156789 DC : 0 | BS EN 15595 - RAILWAY APPLICATIONS - BRAKING - WHEEL SLIP PREVENTION EQUIPMENT |
04/30116612 DC : DRAFT JUL 2004 | EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
BS EN 50463-3:2017 | Railway applications. Energy measurement on board train Data handling |
CLC/TS 50537-3:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters |
09/30202529 DC : 0 | BS EN 15954-1 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
CEI EN 60077-1 : 2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
BS EN 14752:2015 | Railway applications. Body side entrance systems for rolling stock |
NF EN 15734-1 : 2011 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
I.S. EN 15954-1:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
BS EN 14033-2:2017 | Railway applications. Track. Railbound construction and maintenance machines Technical requirements for travelling and working |
CEI EN 50343 : 2015 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
S.R. CLC/TS 50535:2010 | RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS |
BS EN 50121-4:2016 | Railway applications. Electromagnetic compatibility Emission and immunity of the signalling and telecommunications apparatus |
EN 50239:2018 | Railway applications - Radio remote control system of traction vehicle for shunting application |
CEI EN 50121-4 : 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
I.S. EN 50155:2017-11 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT |
EN 15746-1:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working |
I.S. EN 14752:2015 | RAILWAY APPLICATIONS - BODY SIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
UNI EN 15746-1 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
CEI CLC/TS 50537-3 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
CLC/TS 50535:2010 | Railway applications - Onboard auxiliary power converter systems |
BS EN 15954-1:2013 | Railway applications. Track. Trailers and associated equipment Technical requirements for running and working |
UNE-EN 15437-2:2013 | Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 2: Performance and design requirements of on-board systems for temperature monitoring |
11/30213789 DC : 0 | BS EN 50463-3 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING |
UNE-EN 62718:2016 | Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps |
14/30295389 DC : 0 | BS EN 14752 - RAILWAY APPLICATIONS - BODYSIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
NF EN 15746-1 : 2010 + A1 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
12/30244740 DC : 0 | BS EN 15954-1 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
NF EN 50215 : 2010 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
BS EN 50463-2:2017 | Railway applications. Energy measurement on board trains Energy measuring |
11/30213786 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
BS EN 50121-3-1:2017 | Railway applications. Electromagnetic compatibility Rolling stock. Train and complete vehicle |
UNE-EN 50121-2:2017 | Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world |
BS EN 50463:2007 | Railway applications. Energy measurement on board trains |
BS EN 50343 : 2014 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
UNE-EN 15220:2017 | Railway applications - Brake indicators |
UNI CEN/TS 13149-8 : 2013 | PUBLIC TRANSPORT - ROAD VEHICLE SCHEDULING AND CONTROL SYSTEMS - PART 8: PHYSICAL LAYER FOR IP COMMUNICATION |
EN 50463-2:2017 | Railway applications - Energy measurement on board trains - Part 2: Energy measuring |
EN 15595:2009+A1:2011 | Railway applications - Braking - Wheel slide protection |
AS/RISSB 7505 : 2014 | Railway Rolling Stock – Signal Detection Interface Signalling Detection Interface |
I.S. EN 50215:2009 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
CEI EN 50463-2 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
EN 50121-3-1:2017 | Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
I.S. EN 15955-1:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
CEI EN 50155 : 2008 | RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
AS/RISSB 7722 : 2016 | EMC Management |
EN 50463-3:2017 | Railway applications - Energy measurement on board trains - Part 3: Data handling |
EN 50121-4:2016 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
I.S. EN 15220:2016 | RAILWAY APPLICATIONS - BRAKE INDICATORS |
BS EN 50121-2:2017 | Railway applications. Electromagnetic compatibility Emission of the whole railway system to the outside world |
I.S. EN 62718:2016 | RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS |
I.S. EN 15437-2:2012 | RAILWAY APPLICATIONS - AXLEBOX CONDITION MONITORING - INTERFACE AND DESIGN REQUIREMENTS - PART 2: PERFORMANCE AND DESIGN REQUIREMENTS OF ON-BOARD SYSTEMS FOR TEMPERATURE MONITORING |
S.R. CLC/TS 50537-2:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS |
I.S. EN 15595:2009 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
I.S. EN 50121-4:2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
I.S. EN 50463:2007 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
I.S. EN 50239:2018 | RAILWAY APPLICATIONS - RADIO REMOTE CONTROL SYSTEM OF TRACTION VEHICLE FOR SHUNTING APPLICATION |
EN 16185-1:2014 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
UNE-EN 16207:2015 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
UNI EN 15955-1 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
UNI EN 13977 : 2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
UNI EN 15954-1 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
03/313806 DC : DRAFT AUG 2003 | EN 14752 - RAILWAY APPLICATIONS - DOOR SYSTEMS FOR ROLLING STOCK |
CEI CLC/TS 50535 : 2011 | RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS |
DIN EN 15437-2:2012-12 | Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 2: Performance and design requirements of on-board systems for temperature monitoring |
UNE-EN 50463-3:2013 | Railway applications - Energy measurement on board trains - Part 3: Data handling |
BS EN 16185-1:2014 | Railway applications. Braking systems of multiple unit trains Requirements and definitions |
BS EN 16207:2014 | Railway applications. Braking. Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
15/30329549 DC : 0 | BS EN 50463-3 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING |
04/30117592 DC : DRAFT AUG 2004 | EN 50121-3-1 - RAILWAY APPLICATIONS. ELECTROMAGNETIC COMPATIBILITY - PART 3-1 - ROLLING STOCK. TRAIN AND COMPLETE VEHICLE |
NF EN 15595 : 2009 + A1 2011 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
15/30329546 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
03/317142 DC : 0 | PREN 14033-1 - RAILWAY APPLICATIONS - TRACK - TECHNICAL REQUIREMENTS FOR RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: RUNNING OF RAILBOUND MACHINES |
DIN EN 16207:2014-11 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
I.S. EN 14033-2:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
BS EN 14033-1:2017 | Railway applications. Track. Railbound construction and maintenance machines Technical requirements for running |
I.S. EN 50463-3:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING |
S.R. CEN/TS 13149-8:2013 | PUBLIC TRANSPORT - ROAD VEHICLE SCHEDULING AND CONTROL SYSTEMS - PART 8: PHYSICAL LAYER FOR IP COMMUNICATION |
UNI EN 15595 : 2011 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
15/30270320 DC : 0 | BS EN 15595 - RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
I.S. EN 15746-1:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
UNE-EN 50121-3-1:2017 | Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
I.S. EN 50311:2003 | RAILWAY APPLICATIONS - ROLLING STOCK - D.C. SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS |
I.S. EN 50343:2014 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
DIN EN 13977:2011-04 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
DIN EN 14752:2015-05 | RAILWAY APPLICATIONS - BODY SIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
BS EN 13977:2011 | Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance |
UNE-EN 14752:2015 | Railway applications - Body side entrance systems for rolling stock |
UNE-EN 15595:2009 | Railway applications - Braking - Wheel slide protection |
UNE-EN 15955-1:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working |
EN 15220:2016 | Railway applications - Brake indicators |
EN 16207:2014 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
EN 13977:2011 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
EN 15954-1:2013 | Railway applications - Track - Trailers and associated equipment - Part 1: Technical requirements for running and working |
EN 14033-2:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working |
EN 15437-2:2012 | Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 2: Performance and design requirements of on-board systems for temperature monitoring |
EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
EN 15955-1:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working |
UNI EN 16207 : 2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
07/30172830 DC : DRAFT DEC 2007 | BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
DIN EN 15955-1:2013-08 | Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working |
PREN 50125-1 : DRAFT 2012 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: EQUIPMENT ON BOARD ROLLING STOCK |
13/30252777 DC : 0 | BS EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS |
DD CLC/TS 50537-3:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Water pump for traction converters |
BS EN 15955-1:2013 | Railway applications. Track. Demountable machines and associated equipment Technical requirements for running and working |
BS EN 15220:2016 | Railway applications. Brake indicators |
BS EN 15437-2:2012 | Railway applications. Axlebox condition monitoring. Interface and design requirements Performance and design requirements of on-board systems for temperature monitoring |
05/30141113 DC : 0 | EN 50463 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
PD CEN/TS 13149-8:2013 | Public transport. Road vehicle scheduling and control systems Physical layer for IP communication |
05/19988433 DC : 0 | PREN 14033-2 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR WORKING |
PREN 15595 : DRAFT 2015 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
I.S. EN 50121-2:2017 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMISSION OF THE WHOLE RAILWAY SYSTEM TO THE OUTSIDE WORLD |
I.S. EN 50121-3-1:2017 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-1: ROLLING STOCK - TRAIN AND COMPLETE VEHICLE |
EN 50121-2:2017 | Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world |
PREN 50121-2 : DRAFT 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMISSION OF THE WHOLE RAILWAY SYSTEM TO THE OUTSIDE WORLD |
UNE-EN 50121-4:2017 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
S.R. CLC/TS 50537-3:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
I.S. EN 14033-1:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
DIN EN 15746-1:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working (includes Amendment A1:2011) |
CEN/TS 13149-8:2013 | Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communication |
DIN EN 16185-1:2015-03 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
EN 14752:2015 | Railway applications - Body side entrance systems for rolling stock |
EN 50215:2009 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
DIN EN 14033-1:2017-10 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
EN 50343 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
EN 50463:2007 | Railway applications - Energy measurement on board trains |
UNE-EN 15746-1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working |
EN 61000-4-30:2015/AC:2017-01 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS (IEC 61000-4-30:2015/COR1:2016) |
EN 55016-2-3:2017 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
EN 55016-1-4:2010/A2:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-4: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNAS AND TEST SITES FOR RADIATED DISTURBANCE MEASUREMENTS (CISPR 16-1-4:2010/A2:2017) |
CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
EN 50121-1:2017 | Railway applications - Electromagnetic compatibility - Part 1: General |
CISPR 16-2-1:2014 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
CISPR 16-2:2003 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity |
EN 50121-3-1:2017 | Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
CISPR 16-2-3:2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
EN 55016-2-1:2014/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-1: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - CONDUCTED DISTURBANCE MEASUREMENTS (CISPR 16-2-1:2014/A1:2017) |
EN 55016-1-1:2010/A2:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.