EN 499 : 1994
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
Superseded date
12-01-2005
Published date
01-12-2013
Publisher
Sorry this product is not available in your region.
Foreword
0. Introduction
1. Scope
2. Normative references
3. Classification
4. Symbols and requirements
4.1 Symbol for the product/process
4.2 Symbol for strength and elongation of
all-weld metal
4.3 Symbol for impact properties of all-weld
metal
4.4 Symbol for the chemical composition of
all-well metal
4.5 Symbol for type of electrode covering
4.6 Symbol for weld metal recovery and type of
current
4.7 Symbol for welding position
4.8 Symbol for hydrogen content of all-weld
metal
5. Mechanical tests
5.1 Preheating and interpass temperatures
5.2 Pass sequence
6. Chemical analysis
7. Technical delivery conditions
8. Example of designation
Annex A (informative) Description of types of
electrode covering
Annex B (informative) Bibliography
Specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition for manual metal arc welding of non alloy and fine grain steels. Coverage includes: symbol for impact properties of all-weld metal; symbol for type of electrode covering; symbol for welding position; symbol for strength and elongation of all-weld metal; preheating and interpass temperatures; symbol for the product/process.
| Committee |
TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| NBN EN 499 : 1995 | Identical |
| NF EN 499 : 1995 | Identical |
| NEN EN 499 : 1995 | Identical |
| NS EN 499 : 1ED 1995 | Identical |
| I.S. EN 499:1995 | Identical |
| SN EN 499 : 1995 | Identical |
| UNI EN 499 : 1996 | Identical |
| UNE-EN 499:1995 | Identical |
| BS EN 499:1995 | Identical |
| DIN EN 499:1995-01 | Identical |
| DIN 1913-1:1984-06 | Similar to |
| I.S. EN 1597-3:1998 | WELDING CONSUMABLES - TEST METHODS - TESTING OF POSITIONAL CAPABILITY OF WELDING CONSUMABLES IN A FILLET WELD |
| DIN EN 1011-2:2001-05 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
| UNI EN 4632-003 : 2011 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| 05/30128654 DC : DRAFT FEB 2005 | EN 1775 - GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| PREN 4632-003 : DRAFT 2008 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| DIN EN 14532-1:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| BS EN 14200:2004 | Railway applications. Suspension components. Parabolic springs, steel |
| BS EN ISO 2560:2009 | Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification |
| UNE-EN ISO 2560:2010 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| BS EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| BS EN 14075:2002 | Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m<sup>3</sup> and for installation underground. Design and manufacture |
| 00/708210 DC : DRAFT MAY 2000 | ISO/DIS 1071 - WELDING CONSUMABLES - WELDING CONSUMABLES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION |
| 02/704031 DC : DRAFT MAR 2002 | BS EN 1011-8 - WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 8: WELDING OF CAST IRONS |
| UNE-EN 1993-1-12:2010 | Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700 |
| BS EN 14532-1:2004 | Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN ISO 2560:2009 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| DIN EN 1775:2007-10 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| UNI EN ISO 2560 : 2010 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| DIN EN 1993-1-12:2010-12 | Eurocode 3: Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S700 (includes Corrigendum AC:2009) |
| I.S. EN 1775:2007 | GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| NFL 06 380-21 : 2003 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 21: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| BS PD EN ISO/TR 17844 : 2004 | WELDING - COMPARISON OF STANDARDIZED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| 07/30161131 DC : 0 | BS EN ISO 2560 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| 05/30132920 DC : DRAFT APR 2005 | EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES |
| DIN EN 1011-8:2016-03 (Draft) | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 8: WELDING OF CAST IRONS |
| PREN 12699 : DRAFT 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES |
| I.S. EN 4632-003:2010 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| DIN EN ISO 2560:2010-03 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| I.S. EN ISO 2560:2009 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| UNI EN 1993-1-12 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-12: ADDITIONAL RULES FOR THE EXTENSION OF EN 1993 UP TO STEEL GRADES S 700 |
| UNI EN 1775 : 2007 | GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| BS EN 4632-003:2010 | Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| 02/710858 DC : DRAFT SEP 2002 | BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| DIN EN 14015:2005-02 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| BS EN 1597-3:1997 | Welding consumables. Test methods Testing of positional capability of welding consumables in a fillet weld |
| BS EN ISO 15618-2:2002 | Qualification testing of welders for under-water welding Diver-welders and welding operators for hyperbaric dry welding |
| ISO/TR 17844:2004 | Welding Comparison of standardised methods for the avoidance of cold cracks |
| BS EN 12063:1999 | Execution of special geotechnical work. Sheet pile walls |
| ISO 15618-2:2001 | Qualification testing of welders for underwater welding — Part 2: Diver-welders and welding operators for hyperbaric dry welding |
| BS EN 1993-1-12:2007 | Eurocode 3. Design of steel structures Additional rules for the extension of EN 1993 up to steel grades S 700 |
| ISO 2560:2009 | Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
| EN ISO 15618-2:2001 | Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001) |
| EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| EN 1597-3 : 1997 | WELDING CONSUMABLES - TEST METHODS - TESTING OF POSITIONAL CAPABILITY OF WELDING CONSUMABLES IN A FILLET WELD |
| EN 14532-1:2004 | Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| EN 14200:2004 | Railway applications - Suspension components - Parabolic springs, steel |
| EN ISO/TR 17844 : 2004 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| EN 4632-003:2010 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| EN 757:1997 | Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification |
| I.S. EN 14075:2002 | STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE |
| 13/30280740 DC : 0 | BS EN 12699 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES |
| AWS D14.8M:2009 | STANDARD METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| I.S. CEN ISO TR 17844:2004 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| UNI CEN ISO/TR 17844 : 2012 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| BS EN 1775:2007 | Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations |
| BS EN 1011-2:2001 | Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels |
| DIN EN ISO 15618-2:2002-04 | APPROVAL TESTING OF WELDERS FOR UNDER-WATER WELDING - PART 2: DIVER-WELDERS AND WELDING OPERATORS FOR HYPERBARIC DRY WELDING |
| EN 12063:1999 | Execution of special geotechnical work - Sheet-pile walls |
| DIN EN 14075:2003-01 | STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE |
| DIN EN 14200:2004-05 | Railway applications - Suspension components - Parabolic springs, steel |
| I.S. EN 12063:1999 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - SHEET-PILE WALLS |
| EN 26847 : 1994 | COVERED ELECTRODES FOR MANUAL METAL ARC WELDING - DEPOSITION OF A WELD METAL PAD FOR CHEMICAL ANALYSIS |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| EN 1597-1 : 1997 | WELDING CONSUMABLES - TEST METHODS - TEST PIECE FOR ALL-WELD METAL TEST SPECIMENS IN STEEL, NICKEL AND NICKEL ALLOYS |
| ISO 3690:2012 | Welding and allied processes Determination of hydrogen content in arc weld metal |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.