EN 481:1993
Current
Current
The latest, up-to-date edition.
Workplace atmospheres - Size fraction definitions for measurement of airborne particles
Published date
07-31-1993
Publisher
Sorry this product is not available in your region.
Cooperating organizations
National foreword
Foreword
Method
0 Introduction
1 Scope
2 Definitions
3 Principle of conventions
4 Assumptions and approximations
5 Specifications for conventions
Annexes
A (informative) Nomenclature of inhalable and
respirable fractions in English
B (informative) Numerical approximations to cumulative
log-normal distributions
C (informative) Bibliography
Table
1 Numerical values of the conventions, as percentages
of the inhalable convention or of total airborne
particles
Figure
1 The inhalable, thoracic and respirable conventions
as percentages of total airborne particles
National annex
NA (informative) Committees responsible
This standard defines sampling conventions for particle size fractions which are to be used in assessing the possible health effects resulting from inhalation of airborne particles in the workplace. They are derived from experimental data for healthy adults. Conventions are defined for the inhalable, thoracic and respirable fractions; extrathoracic and tracheobronchial conventions may be calculated from the defined conventions.
| Committee |
CEN/TC 137
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| OVE EN 50632-1:2023 01 01 | Identical |
| NS EN 481 : 1ED 1993 | Identical |
| I.S. EN 481:1994 | Identical |
| PN EN 481 : 1998 | Identical |
| NF EN 481 : 1993 | Identical |
| NEN EN 481 : 1994 AMD 1 2001 | Identical |
| SNV DIN EN 481 : 1993 | Identical |
| BS 6069-3.5(1993) : 1993 | Identical |
| BS EN 481:1993 | Identical |
| UNE-EN 481:1995 | Identical |
| UNI EN 481 : 1994 | Identical |
| UNI EN 1481 : 1996 | Identical |
| NBN EN 481 : 1993 | Identical |
| DIN EN 481:1993-09 | Identical |
| PD CEN ISO/TS 12025:2015 | Nanomaterials. Quantification of nano-object release from powders by generation of aerosols |
| 13/30277606 DC : 0 | BS EN 60745-1:2009/AB - HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 10/30230104 DC : 0 | BS SWERF - SIZE WEIGHTED RESPIRABLE FRACTION - SWERF AND SIZE WEIGHTED RESPIRABLE FRACTION OF CRYSTALLINE SILICA - SWERFCS |
| CEN/TR 16013-3:2012 | Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers |
| 14/30303917 DC : 0 | BS EN 50632-1 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 1: GENERAL REQUIREMENT |
| 12/30259166 DC : 0 | BS EN 13205-2 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST, BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| I.S. EN 13205:2002 | WORKPLACE ATMOSPHERES - ASSESSMENT OF PERFORMANCE OF INSTRUMENTS FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS |
| S.R. CEN ISO/TS 12025:2015 | NANOMATERIALS - QUANTIFICATION OF NANO-OBJECT RELEASE FROM POWDERS BY GENERATION OF AEROSOLS (ISO/TS 12025:2012) |
| BS PD ISO/TS 12025 : 2012 | NANOMATERIALS - QUANTIFICATION OF NANO-OBJECT RELEASE FROM POWDERS BY GENERATION OF AEROSOLS |
| I.S. EN 15774:2010 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| PD CEN/TR 16013-2:2010 | Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring Evaluation of airborne particle concentrations using optical particle counters |
| DIN EN 14958:2010-10 | Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements (includes Amendment A1:2009) |
| S.R. CEN/TR 16013-2:2010 | WORKPLACE EXPOSURE - GUIDE FOR THE USE OF DIRECT-READING INSTRUMENTS FOR AEROSOL MONITORING - PART 2: EVALUATION OF AIRBORNE PARTICLE CONCENTRATIONS USING OPTICAL PARTICLE COUNTERS |
| DIN EN 13205-5:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 5: AEROSOL SAMPLER PERFORMANCE TEST AND SAMPLER COMPARISON CARRIED OUT AT WORKPLACES |
| ASTM D 6062M : 1996 | Standard Guide for Personal Samplers of Health-Related Aerosol Fractions [Metric] |
| 10/30235960 DC : 0 | BS EN 482 - WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| BS EN 13205-6:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Transport and handling tests |
| BS EN 15051-1:2013 | Workplace exposure. Measurement of the dustiness of bulk materials Requirements and choice of test methods |
| BS EN 13205-1:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations General requirements |
| PD CEN/TS 17010:2016 | Nanotechnologies. Guidance on measurands for characterising nano-objects and materials that contain them |
| 05/30133044 DC : DRAFT APR 2005 | EN 1093-3 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: BENCH TEST METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A SPECIFIED POLLUTANT |
| DIN EN 15774:2011-10 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
| TR 4618 : 2014 CORR 2014 | AEROSPACE SERIES - AIRCRAFT INTERNAL AIR QUALITY STANDARDS, CRITERIA AND DETERMINATION METHODS |
| EN 14031:2003 | Workplace atmospheres - Determination of airborne endotoxins |
| ASTM D 4532 : 2015 : REDLINE | Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers |
| I.S. EN 13205-4:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| I.S. EN 689:1995 | WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
| I.S. EN ISO 13138:2012 | AIR QUALITY - SAMPLING CONVENTIONS FOR AIRBORNE PARTICLE DEPOSITION IN THE HUMAN RESPIRATORY SYSTEM (ISO 13138:2012) |
| I.S. EN 13205-5:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 5: AEROSOL SAMPLER PERFORMANCE TEST AND SAMPLER COMPARISON CARRIED OUT AT WORKPLACES |
| UNE-EN ISO 13138:2012 | Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012) |
| I.S. EN 13205-2:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| BS EN 14530:2004 | Workplace atmospheres. Determination of diesel particulate matter. General requirements |
| BS EN 14031:2003 | Workplace atmospheres. Determination of airborne endotoxins |
| BS EN 1093-3 : 2006 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: TEST BENCH METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT |
| UNE-EN 1540:2012 | Workplace exposure - Terminology |
| UNE-EN 15051-1:2014 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 1: Requirements and choice of test methods |
| EN 50632-1:2015 | Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements |
| EN 13205-1:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements |
| EN 1093-6:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
| EN 13205-4:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations |
| CEN/TS 17010:2016 | Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them |
| EN 1540:2011 | Workplace exposure - Terminology |
| EN 13205-5:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces |
| EN 13205:2001 | Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
| EN 1093-3:2006+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
| EN 13890:2009 | Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods |
| PD CEN/TR 15230:2005 | Workplace atmospheres. Guidance for sampling of inhalable, thoracic and respirable aerosol fractions |
| S.R. CEN/TS 17010:2016 | NANOTECHNOLOGIES - GUIDANCE ON MEASURANDS FOR CHARACTERISING NANO-OBJECTS AND MATERIALS THAT CONTAIN THEM |
| BS EN 15774:2010 | Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements |
| UNI CEN/TR 16013-2 : 2010 | WORKPLACE EXPOSURE - GUIDE FOR THE USE OF DIRECT-READING INSTRUMENTS FOR AEROSOL MONITORING - PART 2: EVALUATION OF AIRBORNE PARTICLE CONCENTRATIONS USING OPTICAL PARTICLE COUNTERS |
| UNI EN 13205-2 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| S.R. CEN/TR 16013-3:2012 | WORKPLACE EXPOSURE - GUIDE FOR THE USE OF DIRECT-READING INSTRUMENTS FOR AEROSOL MONITORING - PART 3: EVALUATION OF AIRBORNE PARTICLE CONCENTRATIONS USING PHOTOMETERS |
| 16/30323504 DC : DRAFT JAN 2016 | BS EN 16966 - WORKPLACE EXPOSURE - METRICS TO BE USED FOR THE MEASUREMENTS OF EXPOSURE TO INHALED NANOPARTICLES (NANO-OBJECTS AND NANOSTRUCTURED MATERIALS) SUCH AS MASS CONCENTRATION, NUMBER CONCENTRATION AND SURFACE AREA CONCENTRATION |
| PD CEN/TR 16013-3:2012 | Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring Evaluation of airborne particle concentrations using photometers |
| 13/30279726 DC : 0 | BS EN 4618 - AEROSPACE SERIES - AIRCRAFT INTERNAL AIR QUALITY STANDARDS, CRITERIA AND DETERMINATION METHODS |
| 02/563798 DC : DRAFT SEP 2002 | PREN 14530 - WORKPLACE ATMOSPHERES - DETERMINATION OF DIESEL PARTICULATE MATTER - GENERAL REQUIREMENTS |
| 13/30231417 DC : 0 | BS ISO 16258-2 - WORKPLACE AIR - RESPIRABLE CRYSTALLINE SILICA BY X-RAY DIFFRACTION - PART 2: METHOD BY INDIRECT ANALYSIS |
| BS EN 13205-5:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Aerosol sampler performance test and sampler comparison carried out at workplaces |
| BS ISO 18158:2016 | Workplace air. Terminology |
| DIN EN 13205-6 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 6: TRANSPORT AND HANDLING TESTS |
| BS EN 50632-1:2015 | Electric motor-operated tools. Dust measurement procedure General requirements |
| 04/30114100 DC : DRAFT MAY 2004 | PREN 14958 - GRAIN PROCESSING EQUIPMENT - GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| BS ISO 16258-2:2015 | Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Method by indirect analysis |
| UNE-EN 13936:2014 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
| BS EN 13205-4:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Laboratory performance test based on comparison of concentrations |
| DIN EN 13205-5 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 5: AEROSOL SAMPLER PERFORMANCE TEST AND SAMPLER COMPARISON CARRIED OUT AT WORKPLACES |
| 12/30259160 DC : DRAFT JULY 2012 | BS EN 13936 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
| DD ENV 13936:2001 | Workplace atmospheres. Measurement of chemical agents present as mixtures of airborne particles and vapour. Requirements and test methods |
| 08/30175637 DC : DRAFT MAR 2008 | BS EN 15774 - FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| 00/565216 DC : DRAFT DEC 2000 | EN 14031 - WORKPLACE ATMOSPHERES - DETERMINATION OF AIRBORNE ENDOTOXIN |
| DIN EN 13205-2:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| DIN EN 13205-4 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| I.S. CEN/TR 15230:2005 | WORKPLACE ATMOSPHERES - GUIDANCE FOR SAMPLING OF INHALABLE, THORACIC AND RESPIRABLE AEROSOL FRACTIONS |
| ASTM D 6552 : 2006 : R2016 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| ISO 18158:2016 | Workplace air Terminology |
| ISO 16258-1:2015 | Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 1: Direct-on-filter method |
| PREN 50632-1 : DRAFT 2014 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 1: GENERAL REQUIREMENT |
| UNI EN 13936 : 2014 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
| ASTM D 6061 : 2001 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| UNI EN 15774 : 2011 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13098:2001 | WORKPLACE ATMOSPHERE - GUIDELINES FOR MEASUREMENT OF AIRBORNE MICRO-ORGANISMS AND ENDOTOXIN |
| ASTM D 6062 : 2007 | Standard Guide for Personal Samplers of Health-Related Aerosol Fractions |
| PREN 16966 : DRAFT 2016 | WORKPLACE EXPOSURE - METRICS TO BE USED FOR THE MEASUREMENTS OF EXPOSURE TO INHALED NANOPARTICLES (NANO-OBJECTS AND NANOSTRUCTURED MATERIALS) SUCH AS MASS CONCENTRATION, NUMBER CONCENTRATION AND SURFACE AREA CONCENTRATION |
| 18/30353364 DC : 0 | BS EN 17199-3 - WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 3: CONTINUOUS DROP METHOD |
| I.S. EN 60761-2:2004 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 2: SPECIFIC REQUIREMENTS FOR AEROSOLS MONITORS INCLUDING TRANSURANIC AEROSOLS |
| BS EN 13890:2009 | Workplace exposure. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods |
| BS EN 1093-6 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| I.S. EN 482:2012 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| I.S. EN 1093-6:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| I.S. EN 13890:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1093-7:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| I.S. EN 1540:2011 | WORKPLACE EXPOSURE - TERMINOLOGY |
| I.S. EN 1093-3:2006 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: TEST BENCH METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT |
| VDI 3462 Blatt 6:2009-03 | Emission control - Wood machining and processing - Facility-specific measuring instructions |
| VDI 4255 Blatt 2:2009-12 | Bioaerosols and biological agents - Emission sources and control measures in livestock operations - Overview |
| BS ISO 16258-1:2015 | Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Direct-on-filter method |
| BS EN 13936:2014 | Workplace exposure. Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour. Requirements and test methods |
| 12/30259174 DC : 0 | BS EN 13205-5 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 5: AEROSOL SAMPLER PERFORMANCE TEST AND SAMPLER COMPARISON, CARRIED OUT AT WORKPLACES |
| I.S. EN 15051:2006 | WORKPLACE ATMOSPHERES - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - REQUIREMENTS AND REFERENCE TEST METHODS |
| UNI EN 13205-6 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 6: TRANSPORT AND HANDLING TESTS |
| 04/30123368 DC : DRAFT OCT 2004 | EN 15051 - WORKPLACE ATMOSPHERES - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - REQUIREMENTS AND REFERENCE TEST METHODS |
| 11/30252476 DC : 0 | BS EN 15051-3 - WORKPLACE ATMOSPHERES - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD |
| 16/30288734 DC : 0 | BS ISO 19087 - WORKPLACE AIR - ANALYSIS OF RESPIRABLE CRYSTALLINE SILICA BY FOURIER-TRANSFORM INFRARED SPECTROSCOPY |
| 11/30252268 DC : 0 | BS EN 15051-1 - WORKPLACE EXPOSURES - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 1: REQUIREMENTS AND CHOICE OF TEST METHODS |
| 14/30296739 DC : 0 | BS EN 482:2012/A1 - WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| BS EN 13205-2:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Laboratory performance test based on determination of sampling efficiency |
| 10/30201065 DC : DRAFT DEC 2010 | BS EN ISO 13138 - AIR QUALITY - SAMPLING CONVENTIONS FOR AIRBORNE PARTICLE DEPOSITION IN THE HUMAN RESPIRATORY SYSTEM |
| DIN EN ISO 13138:2012-04 | Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012) |
| 08/30163839 DC : DRAFT MAY 2008 | BS EN 13890 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| CEN ISO/TS 12025:2015 | Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) |
| ASTM D 6061 : 2001 : R2018 : EDT 1 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| DIN EN 15051-1:2014-03 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 1: REQUIREMENTS AND CHOICE OF TEST METHODS |
| DIN EN 13205-1:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| PREN 4618 : 200P1 | AEROSPACE SERIES - AIRCRAFT INTERNAL AIR QUALITY STANDARDS, CRITERIA AND DETERMINATION METHODS |
| NF EN 4618 : 2010 | AEROSPACE SERIES - AIRCRAFT INTERNAL AIR QUALITY STANDARDS, CRITERIA AND DETERMINATION METHODS |
| BS EN 14958 : 2006 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14958:2006 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 4618:2009 | AEROSPACE SERIES - AIRCRAFT INTERNAL AIR QUALITY STANDARDS, CRITERIA AND DETERMINATION METHODS |
| CEN/TR 16013-1:2010 | Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 1: Choice of monitor for specific applications |
| UNE-EN 13205-6:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests |
| UNE-EN 13205-5:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces |
| CEN/TR 15230:2005 | Workplace atmospheres - Guidance for sampling of inhalable, thoracic and respirable aerosol fractions |
| PREN 17199-3 : DRAFT 2017 | WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 3: CONTINUOUS DROP METHOD |
| PREN 17199-4 : DRAFT 2017 | WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 4: SMALL ROTATING DRUM METHOD |
| DIN EN 1093-6:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| DIN EN 482:2015-12 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents (includes Amendment A1:2015) |
| DIN EN 13890:2010-01 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| DIN EN 1093-7:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| ENV 13936 : DRAFT 2001 | WORKPLACE ATMOSPHERES - MEASUREMENT OF CHEMICAL AGENTS PRESENT AS MIXTURES OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
| UNI EN 15051-1 : 2014 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 1: REQUIREMENTS AND CHOICE OF TEST METHODS |
| UNI EN 1093-6 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
| UNI EN 1093-7 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| UNI EN 1093-3 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: TEST BENCH METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT |
| UNI EN 13890 : 2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| UNI EN 14958 : 2009 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 13205-2:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency |
| UNE-EN 50632-1:2015 | Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirement |
| 02/564413 DC : DRAFT OCT 2002 | PREN 14583 - WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS |
| PREN 13205 : DRAFT 2010 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS |
| 12/30259163 DC : 0 | BS EN 13205-1 - WORKPLACE EXPOSURE - ASSESSMENT OF PERFORMANCE OF INSTRUMENTS FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| PD CEN/TR 16013-1:2010 | Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring Choice of monitor for specific applications |
| 10/30197389 DC : 0 | BS ISO 12025 - NANOMATERIALS - QUANTIFICATION OF NANO-OBJECT RELEASE FROM POWDERS BY GENERATION OF AEROSOLS |
| BS EN 4618:2009 | Aerospace series. Aircraft internal air quality standards, criteria and determination methods |
| BS IEC 60761-2 : 2002 AMD 15426 | EQUIPMENT FOR CONTINUOUS MONITORING OF RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 2: SPECIFIC REQUIREMENTS FOR RADIOACTIVE AEROSOL MONITORS INCLUDING TRANSURANIC AEROSOLS |
| ASTM D 6552 : 2006 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| 15/30269207 DC : 0 | BS ISO 18158 - WORKPLACE AIR - TERMINOLOGY |
| I.S. EN 13205-1:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| UNI EN 13205-1 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN 60761-2:2004 | Equipment for continuous monitoring of radioactivity in gaseous effluents Specific requirements for radioactive aerosol monitors including transuranic aerosols |
| DIN EN 13205-1 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| UNI CEN/TR 16013-1 : 2010 | WORKPLACE EXPOSURE - GUIDE FOR THE USE OF DIRECT-READING INSTRUMENTS FOR AEROSOL MONITORING - PART 1: CHOICE OF MONITOR FOR SPECIFIC APPLICATIONS |
| I.S. EN 50632-1:2015 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 14031:2003 | WORKPLACE ATMOSPHERES - DETERMINATION OF AIRBORNE ENDOTOXINS |
| I.S. EN 13936:2014 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
| S.R. CEN TR 15547:2007 | WORKPLACE ATMOSPHERES - CALCULATION OF THE HEALTH-RELATED AEROSOL FRACTION CONCENTRATION FROM THE CONCENTRATION MEASURED BY A SAMPLER WITH KNOWN PERFORMANCE CHARACTERISTICS |
| ASTM D 6061 : 2001 : R2012 : EDT 1 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| PREN 482 : DRAFT 2010 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| ISO 16258-2:2015 | Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 2: Method by indirect analysis |
| DIN EN 1093-3:2008-09 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: TEST BENCH METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT |
| IEC 60761-2:2002 | Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 2: Specific requirements for radioactive aerosol monitors including transuranic aerosols |
| BS EN 15051:2006 | Workplace atmospheres. Measurement of the dustiness of bulk materials. Requirements and reference test methods |
| ISO/TS 12025:2012 | Nanomaterials Quantification of nano-object release from powders by generation of aerosols |
| BS EN 482 : 2012 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| UNE-EN 482:2012 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| BS EN 1093-7 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
| EN 15774:2010 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
| EN 14530:2004 | Workplace atmospheres - Determination of diesel particulate matter - General requirements |
| UNI EN 1540 : 2012 | WORKPLACE EXPOSURE - TERMINOLOGY |
| EN 15051:2006 | Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods |
| EN 15051-1:2013 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 1: Requirements and choice of test methods |
| EN 15333-1:2006/AC:2009 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| EN 4618:2009 | Aerospace series - Aircraft internal air quality standards, criteria and determination methods |
| EN 13936:2014 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
| EN ISO 13138:2012 | Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012) |
| DIN EN 13936:2014-04 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
| CEN/TR 15547:2007 | Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics |
| DIN EN 13205-2 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| UNE-EN 13205-4:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations |
| ASTM D 6061 : 2001 : R2007 : EDT 1 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| ASTM D 6552 : 2006 : R2011 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| 11/30228336 DC : 0 | BS EN 13205 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS |
| 12/30259177 DC : 0 | BS EN 13205-6 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 6: TRANSPORT AND HANDLING TESTS |
| UNI EN ISO 13138 : 2012 | AIR QUALITY - SAMPLING CONVENTIONS FOR AIRBORNE PARTICLE DEPOSITION IN THE HUMAN RESPIRATORY SYSTEM |
| 18/30353370 DC : 0 | BS EN 17199-4 - WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 4: SMALL ROTATING DRUM METHOD |
| BS EN ISO 13138:2012 | Air quality. Sampling conventions for airborne particle deposition in the human respiratory system |
| DIN EN 13205-6:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 6: TRANSPORT AND HANDLING TESTS |
| 12/30259171 DC : 0 | BS EN 13205-4 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST, BASED ON COMPARISON OF CONCENTRATIONS |
| UNE-EN 13205-1:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements |
| DIN EN 13205-4:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| UNI EN 13205-4 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| S.R. CEN TR 16013-1:2010 | WORKPLACE EXPOSURE - GUIDE FOR THE USE OF DIRECT-READING INSTRUMENTS FOR AEROSOL MONITORING - PART 1: CHOICE OF MONITOR FOR SPECIFIC APPLICATIONS |
| UNI EN 13205-5 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 5: AEROSOL SAMPLER PERFORMANCE TEST AND SAMPLER COMPARISON CARRIED OUT AT WORKPLACES |
| I.S. EN 13205-6:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 6: TRANSPORT AND HANDLING TESTS |
| I.S. EN 15051-1:2013 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 1: REQUIREMENTS AND CHOICE OF TEST METHODS |
| ASTM D 6062 : 2007 : R2012 | Standard Guide for Personal Samplers of Health-Related Aerosol Fractions |
| EN 689:2018 | Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values |
| ISO 13138:2012 | Air quality — Sampling conventions for airborne particle deposition in the human respiratory system |
| BS EN 14583:2004 | Workplace atmospheres. Volumetric bioaerosol sampling devices. Requirements and test methods |
| BS EN 1540:2011 | Workplace exposure. Terminology |
| BS EN 13205:2002 | Workplace atmospheres. Assessment of performance of instruments for measurement of airborne particle concentrations |
| BS EN 13098:2001 | Workplace atmospheres. Guidelines for measurement of airborne micro-organisms and endotoxin |
| EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| DIN EN 14031:2003-06 | Workplace atmospheres - Determination of airborne endotoxins |
| CEN/TR 16013-2:2010 | Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters |
| DIN EN 14583:2004-12 | Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
| EN 1093-7:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
| EN 13205-6:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests |
| I.S. EN 14583:2004 | WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS |
| DIN EN 15051:2006-07 | WORKPLACE ATMOSPHERES - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - REQUIREMENTS AND REFERENCE TEST METHODS |
| DIN EN 14530:2004-06 | Workplace atmospheres - Determination of diesel particulate matter - General requirements |
| EN 13205-2:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency |
| EN 14583:2004 | Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
| EN 13098:2000 | Workplace atmosphere - Guidelines for measurement of airborne micro-organisms and endotoxin |
| EN 60761-2:2004 | Equipment for continuous monitoring radioactivity in gaseous effluents - Part 2: Specific requirements for aerosols monitors including transuranic aerosols |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.