EN 438-9:2017
Current
The latest, up-to-date edition.
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates
12-20-2017
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Material types and classification system
5 Requirements
Annex A (informative) - Information on reaction to fire
Bibliography
This European Standard specifies performance requirements for high-pressure decorative laminates (HPL) intended for interior use, the core compositions of which are not covered by EN 438-3 [1] to EN 438-6 [4] and EN 438-8 [5]. The core composition types (coloured core and metal reinforced core) are defined in this part of EN 438.EN 438-2 specifies the test methods relevant to this part of EN 438.
| Committee |
CEN/TC 249
|
| DevelopmentNote |
Supersedes PREN 438-9. (12/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 438-9:2011 | Identical |
| SN EN 438-9:2018 | Identical |
| SS-EN 438-9 : 2017 | Identical |
| BS EN 438-9:2017 | Identical |
| NS EN 438-9 : 2017 | Identical |
| ONORM EN 438-9 : 2018 | Identical |
| PN EN 438-9 : 2018 | Identical |
| NBN EN 438-9 : 2010 + A1 2014 | Identical |
| UNI EN 438-9 : 2018 | Identical |
| BS EN 438-9 : 2010 | Identical |
| NF EN 438-9 : 2017 | Identical |
| I.S. EN 438-9:2010 | Identical |
| SN EN 438-9 : 2010 + A1 2014 | Identical |
| I.S. EN 438-9:2017 | Identical |
| NEN EN 438-9 : 2018 | Identical |
| NF EN 438-9 : 2010 + A1 2013 | Identical |
| DIN EN 438-9:2014-02 | Identical |
| UNI EN 438-9 : 2013 | Identical |
| UNE-EN 438-9:2018 | Identical |
| DIN EN 438-9:2018-03 | Identical |
| EN ISO 11664-2:2011 | Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007) |
| EN 438-3:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 438-4:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN 438-6:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| EN 12721:2009+A1:2013 | Furniture - Assessment of surface resistance to wet heat |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
| EN 438-8:2009 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 8: Classification and specifications for design laminates |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN 438-5:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.