EN 438-1:2016
Current
Current
The latest, up-to-date edition.
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
Published date
02-17-2016
Publisher
Sorry this product is not available in your region.
European foreword
1 Scope
2 Normative references
3 Term and definition
4 Guidance in the use of the standard
5 Product classification systems
Annex A (informative) - Addendum relating to hygienic,
health and safety information for laminates
intended for interior use
Bibliography
This part of EN 438 gives an overview of the standard, and provides guidance in the selection and application of test methods and specifications contained in EN 438-2, EN 438-3, EN 438-4, EN 438-5, EN 438-6, EN 438-7, EN 438-8 and EN 438-9.This European Standard is applicable to high-pressure decorative laminate(s) (HPL) produced by using a high pressure process.
| Committee |
CEN/TC 249
|
| DevelopmentNote |
Supersedes PREN 438-1. (02/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 438-1:2016 | Identical |
| BS EN 438-1:2016 | Identical |
| SN EN 438-1 : 2016 | Identical |
| NEN EN 438-1 : 2016 | Identical |
| NS EN 438-1 : 1991 | Identical |
| PN EN 438-1 : 2016 | Identical |
| I.S. EN 438-1:2016 | Identical |
| NF EN 438-1 : 2016 | Identical |
| UNE-EN 438-1:2016 | Identical |
| NBN EN 438-1 : 2016 | Identical |
| UNI EN 438-1 : 2005 | Identical |
| UNE 53173-1:1992 | Identical |
| DIN EN 438-1:2016-06 | Identical |
| SNV NF EN 438-1 : 1991 | Identical |
| DD CEN/TS 15398:2006 | Resilient, textile and laminate floor coverings. Floor covering standard symbols |
| S.R. CEN/TS 15398:2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS - COMPLEMENTARY ELEMENT |
| CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
| BS EN 14183:2003 | Step stools |
| BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| DIN EN 14183:2004-03 | Step stools |
| EN 15186:2012 | Furniture - Assessment of the surface resistance to scratching |
| BS EN 15186:2012 | Furniture. Assessment of the surface resistance to scratching |
| PD CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings. Floor covering standard symbols. Complementary element |
| UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
| DIN EN 14322:2004-06 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| I.S. EN 14322:2017 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| BS 4965:1991 | Specification for decorative laminated plastics sheet veneered boards and panels |
| UNI EN 15186 : 2012 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO SCRATCHING |
| DIN EN 15186:2012-07 | Furniture - Assessment of the surface resistance to scratching; German version EN 15186:2012 |
| PREN 14322 : DRAFT 2014 | WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| I.S. EN 15186:2012 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO SCRATCHING |
| DIN EN 438-7:2005-04 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005 |
| I.S. CEN TS 15398:2006 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS |
| 14/30303732 DC : 0 | BS EN 14322 - WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| UNE-EN 15186:2012 | Furniture - Assessment of the surface resistance to scratching |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS EN 14322:2017 | Wood-based panels. Melamine faced board for interior uses. Definition, requirements and classification |
| EN 438-7:2005 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| EN 14183:2003 | Step stools |
| I.S. EN 438-7:2005 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| UNE-EN 14322:2017 | Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification |
| BS 6222-3:1993 | Domestic kitchen equipment Specification for performance requirements for durability of surface finish and adhesion of surfacing and edging materials |
| EN 14322:2017 | Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification |
| EN 1186-2:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion |
| EN 1186-14:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95 % ethanol |
| EN 438-3:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| EN 438-7:2005 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| EN 1186-4:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 4: Test methods for overall migration into olive oil by cell |
| EN 1186-6:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 6: Test methods for overall migration into olive oil using a pouch |
| ISO 846:1997 | Plastics Evaluation of the action of microorganisms |
| EN 438-4:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| EN 1186-11:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides |
| EN 1186-8:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 8: Test methods for overall migration into olive oil by article filling |
| EN 438-6:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater |
| EN 1186-10:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 10: Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil occurs) |
| EN ISO 846:1997 | Plastics - Evaluation of the action of microorganisms (ISO 846:1997) |
| EN 1186-1:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration |
| EN 1186-13:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures |
| EN 1186-12:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures |
| EN 1186-5:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 5: Test methods for overall migration into aqueous food simulants by cell |
| EN 1186-7:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 7: Test methods for overall migration into aqueous food simulants using a pouch |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| EN 1186-3:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration into aqueous food simulants by total immersion |
| EN 438-8:2009 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 8: Classification and specifications for design laminates |
| EN 1186-15:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 15: Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol |
| EN 1186-9:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 9: Test methods for overall migration into aqueous food simulants by article filling |
| EN 438-5:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.