EN 3475-705:2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
Superseded date
02-19-2022
Superseded by
Published date
10-26-2005
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Preparation of samples
5 Apparatus, measurement and process
5.1 Apparatus
5.2 Measurement
5.3 Process
6 Requirements
This standard specifies the process to be applied for measuring the contrast of wire and cable identification markings against the background of the unmarked wire insulation. It has been developed primarily to define a reproducible process of contrast value determination for use both to determine the intrinsic laser markability of wires at the time of manufacture or later, and to enable electrical wiring systems manufacturers to ensure that the whole process of wire marking is carried out to the required standard.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 3475-705 (11/2003)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 3475-705:2006-07 | Identical |
| NEN EN 3475-705 : 2005 | Identical |
| BS EN 3475-705:2005 | Identical |
| I.S. EN 3475-705:2005 | Identical |
| UNI EN 3475-705 : 2007 | Identical |
| NBN EN 3475-705 : 2006 | Identical |
| UNE-EN 3475-705:2005 | Identical |
| NS EN 3475-705 : 2ED 2006 | Identical |
| PN EN 3475-705 : 2006 | Identical |
| NF EN 3475-705 : A2006 | Identical |
| SN EN 3475-705 : 2005 | Identical |
| ONORM EN 3475-705 : 2006 | Identical |
| BS EN 4650:2010 | Aerospace series. Wire and cable marking process, UV Laser |
| 09/30204366 DC : 0 | BS EN 4604-009 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 009: CABLE, COAXIAL, LIGHT WEIGHT, 50 OHMS, 180 DEGREE C, TYPE KW (LIGHT WN) - PRODUCT STANDARD |
| BS EN 4611-009:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family BJ. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard |
| BS EN 4611-007:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Nickel plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications. UV laser printable. Product standard |
| UNI EN 4608-005 : 2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD |
| 09/30202414 DC : 0 | BS EN 4682-003 - AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| 07/30171735 DC : 0 | BS EN 4650 - AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER |
| PREN 4682-001 : DRAFT 2009 | AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| PREN 2267-012 : DRAFT 2014 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 012: DZ FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| PREN 4682-003 : DRAFT 2009 | AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 4604-003:2009 | Aerospace series. Cable, electrical, for signal transmission Cable, coaxial, 50 ohm, 200 °C, type WZ. Product standard |
| PREN 3375-003 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 003: SINGLE BRAID - 77 OHMS - TYPE KG - PRODUCT STANDARD |
| PREN 3838 : 200P2 | AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER-APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES |
| PREN 4604-003 : 200P2 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 003: COAXIAL CABLE 50 OHM, 200 DEGREES C, TYPE WZ - PRODUCT STANDARD |
| PREN 4650 : 200P1 | AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER |
| I.S. EN 4611-004:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4608-003:2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DN FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD |
| PREN 2854-003 : 200P2 | AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD |
| BS EN 4604-006:2009 | Aerospace series. Cable, electrical, for signal transmission Cable, coaxial, 50 ohm, 200 °C, type WM. Product standard |
| BS EN 4611-004:2012 | Aerospace series. Cables, electrical, for general purpose,single and multicore assembly. XLETFE Family Tin plated copper. Operating temperatures, between -65 °C and 135 °C. Dual extruded wall for open applications. UV laser printable. Product standard |
| BS EN 4604-007:2007 | Aerospace series. Cable, electrical, for signal transmission Cable, coaxial 50 Ohms, 200°C, type WN. Product standard |
| I.S. EN 4604-007:2007 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 007: CABLE, COAXIAL 50 OHMS, 200 DEGREE C, TYPE WN - PRODUCT STANDARD |
| BS EN 3375-001:2007 | Aerospace series. Cable, electrical, for digital data transmission Technical specification |
| NF EN 4604-006 : 2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 006: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WM - PRODUCT STANDARD |
| NF EN 4608-001 : 2006 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| BS EN 4608-001:2006 | Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65°C and 260°C Technical specification |
| BS EN 3375-005:2007 | Aerospace series. Cable, electrical, for digital data transmission Double braid + metallic layer. 77 Ohms. Type WV. Product standard |
| BS EN 3375-006:2006 | Aerospace series. Cable, electrical, for digital data transmission Single braid. 78 Ohms. Type XM. Product standard |
| 11/30242754 DC : 0 | BS EN 2267-009 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 009: DRA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD |
| I.S. EN 4604-003:2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 003: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WZ - PRODUCT STANDARD |
| 09/30209902 DC : 0 | BS EN 2267-011 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 011: XXA FAMILY, SINGLE AND MULTICORE ASSEMBLY FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| UNI EN 4650 : 2011 | AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER |
| BS EN 4611-006:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Silver plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications. UV laser printable. Product standard |
| 10/30228109 DC : 0 | BS EN 4608-004 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN - 65 DEGREE C AND 260 DEGREE C PART 004: DW FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD |
| 14/30314191 DC : 0 | BS EN 3375-009 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 009: SINGLE BRAID - CAN BUS - 120 OHMS - TYPE WX - PRODUCT STANDARD |
| I.S. EN 2266-008:2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 008: DRP (PAIR) DRT (3 CORES) DRQ (4 CORES) FAMILY, MULTICORE UV LASER PRINTABLE JACKETED CABLE - PRODUCT STANDARD |
| 11/30242768 DC : 0 | BS EN 2267-010 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 4611-008:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family BP. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard |
| I.S. EN 4604-008:2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 008: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WD - PRODUCT STANDARD |
| 08/30191879 DC : DRAFT OCT 2008 | EN 3838 - AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES |
| PREN 4612-013 : 200P1 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 013: SX, TC AND UC - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR EQUIPMENT ONLY, WITH JACKET AND SCREEN (SPIRAL) - UV LASER PRINTABLE - PRODUCT STANDARD |
| NF EN 4604-003 : 2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 003: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WZ - PRODUCT STANDARD |
| PREN 4641-102 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| NF EN 4650 : 2010 | AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER |
| I.S. EN 4608-005:2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 2854-003:2009 | AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD |
| BS EN 4681-006:2015 | Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium AZA family, single and multicore assembly, for use in low pressure atmosphere. Product standard |
| UNI EN 4611-003 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| EN 4611-005:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper — Operating temperatures, between –65 °C and 150 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard |
| BS EN 2267-012:2015 | Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C DZ family, single UV laser printable for use in low pressure atmosphere. Product standard |
| NF EN 3838 : 2011 | AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER-APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES |
| 09/30202412 DC : 0 | BS EN 4682-001 - AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| NF EN 3375-008 : 2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 008: SINGLE BRAID - STAR QUAD 100 OHMS - TYPE KD - PRODUCT STANDARD |
| UNI EN 3838 : 2011 | AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER-APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES |
| 09/30209903 DC : 0 | BS EN 2714-015 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREE C AND 260 DEGREE C - PART 015: XX FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| BS EN 4608-003:2012 | Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 °C and 260 °C DN family. Lightweight. UV Laser printable. Product standard |
| 09/30204372 DC : 0 | BS EN 4604-010 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 010: CABLE, COAXIAL, LIGHT WEIGHT, 50 OHMS, 200 DEGREE C, TYPE KX (LIGHT WD) - PRODUCT STANDARD |
| PREN 4681-004 : DRAFT 2009 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 004: ADA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD |
| TR 4648 : 2009 | AEROSPACE SERIES - CABLE, ELECTRICAL - RE-QUALIFICATION FOLLOWING CHANGES IN DESIGN, MATERIAL OR MANUFACTURING PROCESS |
| I.S. EN 4611-009:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4611-008:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4611-005:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 2267-012:2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 012: DZ FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| I.S. EN 4611-006:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4611-007:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4608-001:2006 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| UNI EN 4611-005 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES AND 150 DEGREES - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| UNI EN 4611-007 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 3475-706:2005 | Aerospace series. Cables, electrical, aircraft use. Test methods Laser markability |
| BS EN 3375-003:2007 | Aerospace series. Cable, electrical, for digital data transmission Single braid. 77 Ohms. Type KG. Product standard |
| EN 4611-003:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 003: Tin plated copper - Operating temperatures, between -65 °C and 135 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard |
| EN 4611-004:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between –65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard |
| EN 4604-003:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 ohm, 200 °C, type WZ - Product standard |
| EN 2266-008:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard |
| EN 4611-009:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 009: BJ - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard |
| BS EN 4604-008:2009 | Aerospace series. Cable, electrical, for signal transmission Cable, coaxial, 50 ohms, 200 °C., Type WD. Product standard |
| 14/30300813 DC : 0 | BS EN 4681-001 - AEROSPACE SERIES CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| 09/30202402 DC : 0 | BS EN 4681-003 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SINGLE, UV LASER PRINTABLE - PRODUCT STANDARD |
| UNI EN 4611-009 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD |
| 12/30273364 DC : 0 | BS EN 2713-012 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 012: SILVER PLATED COPPER SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| 09/30202409 DC : 0 | BS EN 4681-001 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| BS EN 4611-003:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Tin plated copper. Operating temperatures, between -65 °C and 135 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard |
| BS EN 2854-003:2009 | Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm<sup>2</sup>. Operating temperatures between -55 °C and 260 °C Product standard |
| 14/30314178 DC : 0 | BS EN 2714-014 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 014: DR FAMILY, 4 TO 11 CORES, TAPED, SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| 09/30209901 DC : 0 | BS EN 2267-012 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 012: XX FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| BS EN 2266-008:2015 | Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable. Product standard |
| PREN 2267-011 : DRAFT 2014 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 011: DZA FAMILY, SINGLE AND MULTICORE ASSEMBLY FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| PREN 2266-008 : DRAFT 2014 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 008: DRP (PAIR) DRT (3 CORES) DRQ (4 CORES) FAMILY, MULTICORE UV LASER PRINTABLE JACKETED CABLE - PRODUCT STANDARD |
| SAE ARP 5607 : 2013 | LEGIBILITY OF PRINT ON AEROSPACE WIRES AND CABLES |
| NF EN 2854-003 : 2009 | AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD |
| I.S. EN 4604-006:2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 006: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WM - PRODUCT STANDARD |
| PREN 3375-008 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 008: SINGLE BRAID - STAR QUAD 100 OHMS - TYPE KD - PRODUCT STANDARD |
| PREN 3375-005 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 005: DOUBLE BRAID + METALLIC LAYER - 77 OHMS - TYPE WV - PRODUCT STANDARD |
| PREN 4604-008 : DRAFT 2008 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 008: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WD - PRODUCT STANDARD |
| PREN 4681-003 : DRAFT 2009 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SINGLE, UV LASER PRINTABLE - PRODUCT STANDARD |
| PREN 3375-007 : 200P2 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 007: DOUBLE BRAID - 77 OHMS - TYPE WW - PRODUCT STANDARD |
| PREN 4604-007 : 200P3 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 007: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WN - PRODUCT STANDARD |
| I.S. EN 4681-006:2015 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 006: AZA FAMILY, SINGLE AND MULTICORE ASSEMBLY, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| I.S. EN 4611-003:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| EN 3375-001:2007 | Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification |
| EN 4604-001:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification |
| EN 4611-007:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard |
| BS EN 2346-003:2006 | Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C DL family, single core. Product standard |
| BS EN 2346-004:2006 | Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C DN family, single UV laser printable and multicore assembly. Light weight. Product standard |
| EN 4604-006:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 ohm, 200 °C, type WM - Product standard |
| BS EN 3375-004:2007 | Aerospace series. Cable, electrical, for digital data transmission Double braid. 77 Ohms. Type WJ. Product standard |
| EN 2346-004:2006 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 C and 260 C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard |
| EN 3375-008:2009 | Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard |
| EN 4611-008:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard |
| EN 2267-012:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard |
| EN 4604-004:2007 | Aerospace series - Cable, electrical, for signal transmission - Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200 °C, type WS - Product standard |
| EN 4608-005:2012 | Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - Part 005: DW family - Lightweight two-core gauge 24 for data transmission - UV laser printable - Product standard |
| EN 2346-003:2006 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 003: DL family, single core - Product standard |
| EN 3375-006:2006 | Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid - 78 Ohms - Type XM - Product standard |
| EN 4604-008:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 008: Cable, coaxial, 50 ohms, 200°C., Type WD - Product standard |
| EN 3475-706:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability |
| EN 3375-005:2007 | Aerospace series - Cable, electrical, for digital data transmission - Part 005: Double braid + metallic layer - 77 Ohms - Type WV - Product standard |
| EN 4608-003:2012 | Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - Part 003: DN family - Lightweight - UV Laser printable - Product standard |
| EN 3375-003:2007 | Aerospace series - Cable, electrical, for digital data transmission - Part 003: Single braid - 77 Ohms - Type KG - Product standard |
| EN 4608-001:2006 | Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 001: Technical specification |
| EN 3375-004:2007 | Aerospace series - Cable, electrical, for digital data transmission - Part 004: Double braid - 77 Ohms - Type WJ - Product standard |
| EN 3838:2010 | Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables |
| EN 4650:2010 | Aerospace series - Wire and cable marking process, UV Laser |
| EN 4681-006:2015 | Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 006: AZA family, single and multicore assembly, for use in low pressure atmosphere - Product standard |
| BS EN 3838:2010 | Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables |
| 14/30314190 DC : 0 | BS EN 3375-007 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 007: DOUBLE BRAID - 77 OHMS - TYPE WW - PRODUCT STANDARD |
| BS EN 4608-005:2012 | Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 °C and 260 °C DW family. Lightweight two-core gauge 24 for data transmission. UV laser printable. Product standard |
| BS EN 3375-008:2009 | Aerospace series. Cable, electrical, for digital data transmission Single braid. Star Quad 100 Ohms. Type KD. Product standard |
| 09/30202389 DC : 0 | BS EN 4681-004 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 004: ADA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD |
| EN 2854-003:2009 | Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm² - Operating temperatures between – 55 °C and 260 °C - Part 003: Product standard |
| PREN 4604-001 : 200P4 | AEROSPACE SERIES CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| UNI EN 4611-008 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD |
| UNI EN 4611-004 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| PREN 3375-006 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 006: SINGLE BRAID - 78 OHMS - TYPE XM - PRODUCT STANDARD |
| PREN 3375-004 : 0 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 004: DOUBLE BRAID - 77 OHMS - TYPE WJ - PRODUCT STANDARD |
| PREN 3475-706 : 200P1 | AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 706: LASER MARKABILITY |
| I.S. EN 4650:2010 | AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER |
| I.S. EN 3375-001:2007 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3838:2010 | AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER-APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES |
| NF EN 3375-001 : 2008 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| UNI EN 4611-006 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| EN 4604-007:2007 | Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial 50 Ω, 200 °C, type WN - Product standard |
| EN 4611-006:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard |
| BS EN 4611-005:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Silver plated copper. Operating temperatures, between -65 °C and 150 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard |
| I.S. EN 3375-008:2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 008: SINGLE BRAID - STAR QUAD 100 OHMS - TYPE KD - PRODUCT STANDARD |
| I.S. EN 4604-001:2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| BS EN 4604-004:2007 | Aerospace series. Cable, electrical, for signal transmission Cable, microcoaxial, high immunity, 50 Ohms, 200°C, type WS. Product standard |
| BS EN 4604-001:2009 | Aerospace series. Cable, electrical, for signal transmission Technical specification |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| EN 3475-706:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.