EN 336:2013
Current
Current
The latest, up-to-date edition.
Structural timber - Sizes, permitted deviations
Published date
10-02-2013
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sizes for structural timber
5 Moisture content measurement
Bibliography
This European Standard specifies two classes of permitted deviations from target sizes for structural timber of softwood and hardwood species.It also specifies the moisture content to be used as a reference point for the measurement of sizes, and gives average values for changes in size due to changes in moisture content.It is applicable to sawn and prepared square-edged structural timber with parallel edges having sawn thicknesses or widths greater than 6 mm.
| Committee |
CEN/TC 124
|
| DevelopmentNote |
Supersedes PREN 336. (10/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 336:2014 | Identical |
| NS EN 336 : 2013 | Identical |
| DIN EN 336:2013-12 | Identical |
| NBN EN 336 : 2013 | Identical |
| SN EN 336 : 2013 | Identical |
| NF EN 336 : 2013 | Identical |
| I.S. EN 336:2013 | Identical |
| UNI EN 336 : 2013 | Identical |
| PN-EN 336:2013-12 | Identical |
| NEN EN 336 : 2013 | Identical |
| BS EN 336:2013 | Identical |
| PREN 15497 : DRAFT 2011 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| 11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
| BS EN 16737:2016 | Structural timber. Visual strength grading of tropical hardwood |
| 13/30278225 DC : 0 | BS EN 1075 - TIMBER STRUCTURES - TEST METHODS - JOINTS MADE WITH PUNCHED METAL PLATE FASTENERS |
| 14/30298224 DC : 0 | BS EN 16737 - STRUCTURAL TIMBER - VISUAL STRENGTH GRADING OF TROPICAL HARDWOOD |
| PREN 14081-1 : DRAFT 2013 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 14081-3:2012 | Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control |
| BS EN 12811-2:2004 | Temporary works equipment Information on materials |
| BS EN 520 : 2004 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 12811-2:2004 | Temporary works equipment - Part 2: Information on materials |
| EN 12248:1999 | Sawn timber used in industrial packaging - Permitted deviations and preferential sizes |
| EN 1059 : 1999 | TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED TRUSSES USING PUNCHED METAL PLATE FASTENERS |
| EN 12249:1999 | Sawn timber used in pallets - Permitted deviations and guidelines for dimensions |
| DIN EN 12811-2:2004-04 | Temporary works equipment - Part 2: Information on materials; German version EN 12811-2:2004 |
| EN 1075:2014 | Timber structures - Test methods - Joints made with punched metal plate fasteners |
| EN 14250:2010 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| DIN EN 15497:2014-07 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| 01/107225 DC : DRAFT OCT 2001 | PREN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED TRUSSES USING PUNCHED METAL PLATE FASTENERS |
| UNI EN 15497 : 2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| I.S. EN 14081-1:2016 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 16737:2016 | Structural timber - Visual strength grading of tropical hardwood |
| DIN EN 1075:2015-03 | TIMBER STRUCTURES - TEST METHODS - JOINTS MADE WITH PUNCHED METAL PLATE FASTENERS |
| DIN EN 14250:2010-05 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| I.S. EN 14081-2:2010 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 2: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR INITIAL TYPE TESTING |
| I.S. EN 520:2005 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 14250:2010 | TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
| I.S. EN 1075:2014 | TIMBER STRUCTURES - TEST METHODS - JOINTS MADE WITH PUNCHED METAL PLATE FASTENERS |
| BS EN 15497:2014 | Structural finger jointed solid timber. Performance requirements and minimum production requirements |
| 12/30261882 DC : 0 | BS EN 14081-1 - TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS-SECTION - PART 1: GENERAL REQUIREMENTS |
| 03/315081 DC : DRAFT SEP 2003 | EN 14732-2 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - PART 2: PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| PREN 1075 : DRAFT 2013 | TIMBER STRUCTURES - TEST METHODS - JOINTS MADE WITH PUNCHED METAL PLATE FASTENERS |
| I.S. EN 16737:2016 | STRUCTURAL TIMBER - VISUAL STRENGTH GRADING OF TROPICAL HARDWOOD |
| UNE-EN 14250:2010 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| BS EN 12249:1999 | Sawn timber used in pallets. Permitted deviations and guidelines for dimensions |
| UNE-EN 14081-2:2010 | Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing |
| EN 519 : 1995 | STRUCTURAL TIMBER - GRADING - REQUIREMENTS FOR MACHINE STRENGTH GRADED TIMBER AND GRADING MACHINES |
| EN 14081-4:2009 | Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems |
| EN 14081-2:2010+A1:2012 | Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing |
| UNI EN 520 : 2009 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 14081-3 : 2012 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 3: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR FACTORY PRODUCTION CONTROL |
| UNI EN 14250 : 2010 | TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
| UNI EN 14081-4 : 2009-07 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 4: MACHINE GRADING - GRADING MACHINE SETTINGS FOR MACHINE CONTROLLED SYSTEMS |
| UNI EN 14081-2 : 2013 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 2: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR INITIAL TYPE TESTING |
| I.S. EN 15497:2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| 11/30249114 DC : 0 | BS EN 15497 - STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| 03/310463 DC : DRAFT JUNE 2003 | EN 14081-4 - TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 4: MACHINE GRADING - GRADING MACHINE SETTINGS FOR MACHINE CONTROLLED SYSTEMS |
| I.S. EN 14081-4:2009 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 4: MACHINE GRADING - GRADING MACHINE SETTINGS FOR MACHINE CONTROLLED SYSTEMS |
| 10/30227077 DC : 0 | BS EN 14081-3 - TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 3: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR FACTORY PRODUCTION CONTROL |
| 07/30152878 DC : DRAFT AUG 2007 | BS EN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
| DIN EN 14081-2:2016-06 (Draft) | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 2: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR INITIAL TYPE TESTING |
| DIN EN 14081-1:2016-06 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS |
| BS EN 14081-2 : 2010 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 2: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR INITIAL TYPE TESTING |
| BS EN 14081-3 : 2012 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 3: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR FACTORY PRODUCTION CONTROL |
| UNE-EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| BS EN 12248:1999 | Sawn timber used in industrial packaging. Permitted deviations and preferential sizes |
| BS EN 1075:2014 | Timber structures. Test methods. Joints made with punched metal plate fasteners |
| BS EN 14250:2010 | Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| UNE-EN 1075:2015 | Timber structures - Test methods - Joints made with punched metal plate fasteners |
| UNE-EN 520:2005 | Gypsum plasterboards - Definitions, requirements and test methods |
| DIN EN 14081-3:2012-04 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 3: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR FACTORY PRODUCTION CONTROL |
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods |
| EN 14081-3:2012 | Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control |
| EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| EN 16737:2016 | Structural timber - Visual strength grading of tropical hardwood |
| DIN EN 16737:2016-09 | STRUCTURAL TIMBER - VISUAL STRENGTH GRADING OF TROPICAL HARDWOOD |
| UNE-EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| 13/30288842 DC : 0 | BS EN 14081-1 - TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS |
| DIN EN 15497 E : 2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| DIN EN 520:2009-12 | Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009) |
| BS EN 1313-2:1999 | Round and sawn timber. Permitted deviations and preferred sizes Hardwood sawn timber |
| BS EN 1059:1999 | Timber structures. Product requirements for prefabricated trusses using punched metal plate fasteners |
| BS EN 14081-4:2009 | Timber structures. Strength graded structural timber with rectangular cross section Machine grading. Grading machine settings for machine controlled systems |
| BS EN 14081-1:2016 | Timber structures. Strength graded structural timber with rectangular cross section General requirements |
| BS EN 846-4:2002 | Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of straps |
| DIN EN 14081-4:2009-06 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 4: MACHINE GRADING - GRADING MACHINE SETTINGS FOR MACHINE CONTROLLED SYSTEMS |
| DIN EN 14081-4:2009-10 | TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 4: MACHINE GRADING - GRADING MACHINE SETTINGS FOR MACHINE CONTROLLED SYSTEMS |
| DIN EN 846-4:2005-01 | Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps |
| EN 13183-3:2005 | Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method |
| EN 14298:2017 | Sawn timber - Assessment of drying quality |
| EN 1309-1:1997 | Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.