EN 3021:2017
Current
Current
The latest, up-to-date edition.
Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification
Published date
07-19-2017
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Composition
5 Curing
6 Storage
7 Batch release and qualification testing quality assurance
This standard specifies the qualification and test requirements for graphite and halogen free molybdenum disulphide dry film lubricant.Test requirements and testing of fretting, corrosion, wear and friction properties of relevant lubricants are not part of this standard. Refer to relevant standards in normative references. All testing defined in this standard has to be certified by the manufacturer of the lubricant.In order to achieve uniform coatings with defined thickness and best adhesion properties, spray application in combination with heat curing is recommended.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 3021. (08/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 3021:2017 | Identical |
| DIN EN 3021:2017-09 | Identical |
| UNE-EN 3021:2017 | Identical |
| PN EN 3021 : 2017 | Identical |
| NS EN 3021 : 2017 | Identical |
| SN EN 3021 : 2017 | Identical |
| NEN EN 3021 : 2017 | Identical |
| NF EN 3021 : 2017 | Identical |
| BS EN 3021:2017 | Identical |
| PNE-FprEN 3021 | Identical |
| TR 4858 : 2018 | AEROSPACE SERIES - PIPE COUPLINGS MATERIALS AND SURFACE TREATMENTS |
| BS EN 3030:1994 | Test method for dry film lubricants. Solids content |
| EN 3032:1994 | Aerospace series - Test method for dry film lubricants - Thickness measurement |
| EN 3027:1994 | Aerospace series - Test method for dry film lubricants - Salt spray test |
| EN 3030:1994 | Aerospace series - Test method for dry film lubricants - Solids content |
| EN 3026:1994 | Aerospace series - Test method for dry film lubricants - Corrosion test on steels specimens |
| BS EN 3032:1994 | Test method for dry film lubricants. Thickness measurement |
| BS EN 3026:1994 | Test method for dry film lubricants. Corrosion test on steel specimens |
| BS EN 3027:1994 | Test method for dry film lubricants. Salt spray test |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| EN 4160:2011 | Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
| PREN 3847 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
| EN 2497:1989 | Aerospace series - Dry abrasive blasting of titanium and titanium alloys |
| EN ISO 9117-6:2012 | Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN ISO 1524:2013 | Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
| EN 2491:2011 | Aerospace series - Molybdenum disulphide dry lubricants - Coating methods |
| EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN ISO 8504-2:2001 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000) |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| ISO 8080:1985 | Aerospace Anodic treatment of titanium and titanium alloys Sulfuric acid process |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| EN ISO 2811-3:2011 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| EN 3026:1994 | Aerospace series - Test method for dry film lubricants - Corrosion test on steels specimens |
| EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| EN ISO 9117-1:2009 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| ISO 11078:2007 | Aircraft — De-icing/anti-icing fluids — ISO types II, III and IV |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 2811-4:2011 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 2811-4:2011 | Paints and varnishes Determination of density Part 4: Pressure cup method |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| ISO 1524:2013 | Paints, varnishes and printing inks Determination of fineness of grind |
| EN 3027:1994 | Aerospace series - Test method for dry film lubricants - Salt spray test |
| ISO 8504-2:2000 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning |
| ISO 11075:2007 | Aircraft — De-icing/anti-icing fluids — ISO type I |
| ISO 9117-1:2009 | Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time |
| ISO 9117-6:2012 | Paints and varnishes — Drying tests — Part 6: Print-free test |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN 3030:1994 | Aerospace series - Test method for dry film lubricants - Solids content |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| EN ISO 4618:2014 | Paints and varnishes - Terms and definitions (ISO 4618:2014) |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.