SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS

Superseded date

03-01-2008

Superseded by

EN ISO 13857:2008

Published date

01-12-2013

Publisher

Comite Europeen de Normalisation

Sorry this product is not available in your region.

Foreword
0 Introduction
1 Scope
2 Normative references
3 Definitions
  3.1 Protective structure
  3.2 Safety distance
4 Values for safety distances
  4.1 General
  4.2 Reaching upwards
  4.3 Reaching over protective structures
  4.4 Reaching round
  4.5 Reaching through openings
5 Effect of additional protective structures on safety distances

Establishes values for safety distances to prevent danger zones being reached by the upper limbs of persons with a minimum age of three years. Need not be applied to machinery which is covered by certain electrical standard in which specific testing procedures are set out.

Committee	TC 114
DocumentType	Standard
PublisherName	Comite Europeen de Normalisation
Status	Superseded
SupersededBy	EN ISO 13857:2008
Supersedes	NFE 09 010 : 1984

Standards	Relationship
BS EN 294:1992	Identical
NF EN 294 : 1992	Identical
UNI EN 294 : 1993	Identical
PN EN 294 : 1994	Identical
UNE-EN 294:1993	Identical
NBN EN 294 : 1992	Identical
NS EN 294 : 1ED 1992	Identical
SN EN 294 : 1995	Identical
I.S. EN 294:1994	Identical
NEN EN 294 : 1994	Identical
DIN EN 294:1992-08	Identical

I.S. EN 1088:1996	SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
I.S. EN 1454:1998	PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY
BS EN 1501-3:2008	Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles
DIN EN 15162:2008-10	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
I.S. EN ISO 12100-2:2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
BS EN 14677:2008	Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
14/30303750 DC : 0	BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS
I.S. EN 12415:2000	SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
02/711111 DC : DRAFT SEP 2002	PREN 415-7 - PACKAGING MACHINES SAFETY - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
03/119040 DC : DRAFT NOV 2003	PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
04/102158 DC : 0	BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES
06/30118768 DC : 0	EN 1398 - DOCK LEVELLERS
07/30172833 DC : DRAFT DEC 2007	BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
11/30244210 DC : 0	BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
00/707535 DC : DRAFT APR 2000	PREN 13885:2000 - FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
08/30177207 DC : DRAFT MAY 2008	BS EN 13019 AMD1 - MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
07/30142135 DC : 0	BS EN 1012-1 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
I.S. EN 13128:2001	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
I.S. EN 14070:2003	SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
03/313810 DC : 0	EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
03/308804 DC : 0	ISO 4254-6 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - TECHNICAL MEANS FOR ENSURING SAFETY - PART 6: SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS
97/720419 DC : DRAFT DEC 1997	PREN 1009-3 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 3: CRUSHING AND MILLING MACHINERY
BS EN 13035-1:2008	Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment inside the factory
00/706811 DC : DRAFT MAR 2000	BS EN 13870 - FOOD PROCESSING MACHINERY - CHOP CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
05/30130669 DC : DRAFT MAR 2005	BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
03/114108 DC : DRAFT AUG 2003	EN 14655 - FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 14958:2010-10	Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements (includes Amendment A1:2009)
97/707829 DC : DRAFT MAY 1997	PREN 12851 - FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
05/30076926 DC : DRAFT APR 2005	EN 12604 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS
BS EN 15162:2008	Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws
97/713936 DC : DRAFT AUG 1997	PREN 13000 - CRANES - SAFETY - MOBILE CRANES
08/30181446 DC : DRAFT JULY 2008	BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
BS EN 14753:2007	Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
07/30163456 DC : 0	BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
05/30129947 DC : 0	EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
05/19981949 DC : DRAFT MAY 2005	BS EN 1034-14 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLICERS
08/30177210 DC : DRAFT MAY 2008	BS EN 13021 AMD1 - WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
99/711929 DC : DRAFT JUL 1999	EN 13621 - FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12012-4 : 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
04/30115503 DC : DRAFT JUN 2004	EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
04/30111616 DC : 0	EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
08/30173506 DC : DRAFT JAN 2008	BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
04/30126149 DC : 0	EN 528 - RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY
CSA C22.2 No. 61010.1 :2012	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
EN 703:2004+A1:2009	Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety
CSA C22.2 No. 61010.1 : 2012 : FR	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 15164:2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
I.S. EN 13000:2010	Cranes - Mobile cranes
I.S. EN 16282-2:2016	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
I.S. EN 1501-3:2008	REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
PREN 378-1 : DRAFT 2013	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
EN 81-80:2003	Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts
I.S. EN 1114-3:2001	RUBBER AND PLASTICS MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
DIN EN 1673:2010-10	Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 415-7:2009-12	Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
DIN EN 13288:2010-10	Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 415-5:2010-04	Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009)
DIN EN 13525:2010-05	FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
DIN EN 13118:2010-01	Agricultural machinery - Potato harvesting equipment - Safety (includes Amendment A1:2009)
DIN EN 13355:2010-06	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN 1010-3:2010-06	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines (includes Amendment A1:2009)
DIN EN 1495:2009-12	Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009)
DIN EN 1034-14:2010-07	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter (includes Amendment A1:2009)
DIN EN 12653:2010-06	Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements (includes Amendment A2:2009)
DIN EN 13019:2009-04	Machines for road surface cleaning - Safety requirements (includes Amendment A1:2008)
DIN EN 1756-2:2009-12	Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers (includes Amendment A1:2009)
DIN EN 12012-3:2010-02	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
DIN EN 12198-2:2008-11	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
DIN EN 13389:2010-10	Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009)
BS EN 12203 : 2003	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
BS EN 14466 : 2005	FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
BS EN 14018 : 2005	AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
BS EN 786 : 1996	GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
BS EN 13035-3 : 2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
BS EN 13042-3 : 2007	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
BS EN 1974 : 1998	FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13128 : 2001	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
BS EN 13448 : 2002	AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
BS EN 618 : 2002
BS EN 12604:2000	Industrial, commercial and garage doors and gates. Mechanical aspects. Requirements
BS EN 704 : 1999	AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
BS EN 13000 : 2010	CRANES - MOBILE CRANES
BS EN 1035:1999	Tannery machines. Moving platen machinery. Safety requirements
BS EN 12198-2 : 2002	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
BS EN 14861 : 2004	FOREST MACHINERY - SELF PROPELLED MACHINERY - SAFETY REQUIREMENTS
DIN EN 13042-1:2010-04	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder (includes Amendment A1:2009)
BS EN 12198-3 : 2002	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
BS EN 13118 : 2000	AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY
BS EN 15067:2007	Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements
BS EN 12387 : 2005	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
BS EN 1673 : 2000	FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1673:2000	FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12198-2:2002	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
EN 1974:1998+A1:2009	Food processing machinery - Slicing machines - Safety and hygiene requirements
I.S. EN 14010:2004
I.S. EN 957-2:2003	STATIONARY TRAINING EQUIPMENT - PART 2: STRENGTH TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 14910:2007	GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
I.S. EN 12921-1:2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 15746-2 : 2011	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
EN 12203:2003+A1:2009	Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
UNI EN 703 : 2010	AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY
DIN EN 15067:2008-03	Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
EN 12012-4:2006+A1:2008	Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
EN 13102:2005+A1:2008	Ceramic machines - Safety - Loading and unloading of fine clay tiles
EN 1088:1995+A2:2008	Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
EN 12198-3:2002+A1:2008	Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
EN 13035-2:2008	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
DIN EN 14070:2009-07	SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
CEN/TR 15563:2007	Temporary works equipment - Recommendations for achieving health and safety
EN 1034-5:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
EN 12044:2005+A1:2009	Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
EN 12653:1999+A2:2009	Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
EN 1010-1:2004+A1:2010	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 13112:2002+A1:2009	Tannery machines - Splitting and bandknife shearing machines - Safety requirements
EN 1070 : 1998	SAFETY OF MACHINERY - TERMINOLOGY
DIN EN 81-2:2000-05	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
DIN EN 1114-3:2010-01	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
EN 12151:2007	Machinery and plants for the preparation of concrete and mortar - Safety requirements
EN 1034-6:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
EN 12336:2005+A1:2008	Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
DIN EN 1114-2:2010-01	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
DIN EN 791:2010-01	DRILL RIGS - SAFETY
EN 12717:2001+A1:2009	Safety of machine tools - Drilling machines
EN 12621:2006+A1:2010	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 13114:2002+A1:2009	Tannery machines - Rotating process vessels - Safety requirements
EN 13021:2003+A1:2008	Winter service machines - Safety requirements
EN 12965:2003+A2:2009	Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
EN 12921-1:2005+A1:2010	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 1010-4:2004+A1:2009	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
EN 12215:2004+A1:2009	Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 12693:2008	Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 1114-2:1998+A1:2008	Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
EN 12478:2000/AC:2001	SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
UNI EN 415-3 : 2010	SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
EN 12757-1:2005+A1:2010	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 13118:2000+A1:2009	Agricultural machinery - Potato harvesting equipment - Safety
EN 13355:2004+A1:2009	Coating plants - Combined booths - Safety requirements
EN 12198-2:2002+A1:2008	Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure
EN 12505:2000+A1:2009	Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements
EN 1034-13:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
EN 1034-7:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
EN 13042-1:2007+A1:2009	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
EN 12012-3:2001+A1:2008	Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
EN 13042-3:2007+A1:2009	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
EN 1034-2:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
EN 13448:2001+A1:2009	Agricultural and forestry machinery - Inter-row mowing units - Safety
EN 12012-2:2001+A2:2008	Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
EN 1010-3:2002+A1:2009	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
DIN EN 999:1998-12	SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
I.S. EN 13200-4:2006	SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
DIN EN 1501-3:2010-06	Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
92/70321 DC : DRAFT FEB 1992	SPECIFICATION FOR CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS ONLY - SPECIAL SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES
03/109865 DC : DRAFT JULY 2003	BS EN 415-6 - PACKAGING MACHINES SAFETY - PART 6: PALLET WRAPPING MACHINES
09/30178293 DC : 0	BS EN 859:2007/A1 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
03/116757 DC : DRAFT OCT 2003	EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC PASSENGER AND GOODS PASSENGER LIFTS WITH INCLINED TRAVEL PATH
03/301332 DC : DRAFT JAN 2003	ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
UNE-EN 13684:2005	Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
08/30178810 DC : DRAFT MAY 2008	BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
I.S. EN 1870-2:1999	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
BS EN 45510-6-8:2000	Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes
03/306578 DC : DRAFT APR 2003	EN 14658 - CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
04/30106849 DC : DRAFT MAY 2004	EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
08/30173038 DC : DRAFT JAN 2008	BS EN 422 - PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
EN 474-1:2006+A5:2018	Earth-moving machinery - Safety - Part 1: General requirements
03/306593 DC : DRAFT APR 2003	BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
04/30114100 DC : DRAFT MAY 2004	PREN 14958 - GRAIN PROCESSING EQUIPMENT - GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12151:2007	MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
DIN EN 15164:2008-09	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
11/30244195 DC : 0	BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
04/102838 DC : DRAFT JAN 2004	EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
01/715188 DC : DRAFT NOV 2001	PREN 774 - GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
03/118895 DC : 0	EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
PREN 12453 : DRAFT 2014	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS
09/30202532 DC : 0	BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
03/314351 DC : 0	EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
04/30124285 DC : 0	EN 15059 - SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS
BS EN 12693:2008	Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
05/30131998 DC : 0	BS EN 15180 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
04/301783 DC : DRAFT JAN 2004	EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
05/19981971 DC : 0	BS EN 1034-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
PREN 15746-2 : DRAFT 2015	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 14017:2005	AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
00/715016 DC : DRAFT OCT 2000	PREN 13977 - RAILWAY APPLICATIONS - TRACK - PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
05/19981975 DC : DRAFT JUN 2005	BS EN 1034-2 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
ISO 20957-2:2005	Stationary training equipment Part 2: Strength training equipment, additional specific safety requirements and test methods
UNI EN 81-80 : 2009	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS
PREN 14986 : DRAFT 2014	DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN 15746-2:2010	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DD ENV 1070:1993	Safety of machinery. Terminology
I.S. EN 13035-1:2008	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
I.S. EN 61029-1:2009	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
UNE-EN 16282-4:2017	Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; Design and safety requirements
UNI EN 12012-1 : 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
NF EN 1501-2 : 2005 + A1 2010	REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
NF EN 1673 : 2000 + A1 2010	FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
EN 61010-1:2010	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
I.S. EN 12965:2003	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
S.R. CWA 15902-1:2009	LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
DIN EN 1010-1:2011-06	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 12215:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 12387:2010-03	Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009)
DIN EN 13200-4:2006-12	Spectator facilities - Part 4: Seats - Product characteristics
DIN EN 12965:2009-12	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
DIN EN 13000:2014-11	CRANES - MOBILE CRANES
DIN EN 1034-22:2010-06	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood grinders (includes Amendment A1:2009)
DIN EN 13114:2010-03	Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009)
DIN EN 13128:2009-09	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
DIN EN 13021:2009-04	Winter service machines - Safety requirements (includes Amendment A1:2008)
DIN EN 1010-4:2010-12	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines (includes Amendment A1:2009)
DIN EN 12621:2011-07	Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 12957:2009-07	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
DIN EN 13112:2011-03	Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009)
DIN EN 12203:2010-07	Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009
DIN EN 12301:2015-12 (Draft)	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN 1756-1:2008-10	Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods (includes Amendment A1:2008)
DIN EN 12417:2009-07	MACHINE TOOLS - SAFETY - MACHINING CENTRES
DIN EN 12581:2011-02	Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
DIN EN 12981:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 13102:2009-05	CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
DIN EN 1974:2016-06 (Draft)	Food processing machinery - Slicing machines - Safety and hygiene requirements; German and English version prEN 1974:2016
DIN EN 1012-2:2011-12	Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
DIN EN 620:2011-07	Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials (includes Amendment A1:2010)
DIN EN 14010:2009-12	Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009)
DIN EN 909:2009-12	Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety (includes Amendment A1:2009)
DIN EN 14466:2008-09	FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
DIN EN 693:2011-11	MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
DIN EN 14910:2009-08	GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
DIN EN 12044:2010-03	Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009)
DIN EN 14238:2010-02	Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009)
DIN EN 13035-3:2010-02	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
DIN EN 13042-3:2010-05	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (includes Amendment A1:2009)
BS EN 774:1996	Garden equipment. Hand held, integrally powered hedge trimmers. Safety
BS EN 1501-2 : 2005	REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
BS EN 1870-2:1999	Safety of woodworking machines. Circular sawing machines Horizontal beam panel saws and vertical panel saws
BS EN 14238 : 2004	CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
BS EN 12215 : 2004	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
BS EN 12981 : 2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 13355 : 2004	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN 12653 : 2000	FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
BS EN 1034-14 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
BS EN 12757-1 : 2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN 13218 : 2002	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
BS EN 620 : 2002
BS EN 81-80:2003	Safety rules for the construction and installation of lifts. Existing lifts Rules for the improvement of safety of existing passenger and goods passenger lifts
I.S. EN 12215:2004	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 619:2002
DIN EN 1915-1:2001-06	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
I.S. EN 1034-2:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
I.S. EN 12717:2001	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
I.S. EN 13862:2002	FLOOR CUTTING-OFF MACHINES - SAFETY
I.S. EN 13114:2002	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
I.S. EN 12312-20:2005	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
I.S. EN 12203:2003	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
EN 15746-2:2010+A1:2011	Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
I.S. EN 13448:2002	AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
DIN EN 12012-2:2010-02	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 1010-4:2004	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
I.S. EN 1070:1999	SAFETY OF MACHINERY - TERMINOLOGY
I.S. EN 13288:2005	FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-13:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
I.S. EN 12198-3:2002	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
I.S. EN 12757-1:2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNI EN 1673 : 2010	FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 709:1997	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
I.S. EN 13118:2001	AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY
I.S. EN 13140:2001	AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY
DIN EN 1570:2009-12	SAFETY REQUIREMENTS FOR LIFTING TABLES
I.S. EN 1028-1:2002	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
I.S. EN 14238:2004	CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
I.S. EN 786:1996	GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
I.S. EN 1034-22:2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
I.S. EN 13042-1:2007	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
I.S. EN 415-3:2000	SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
I.S. EN 13035-3:2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
DIN EN 13218:2010-09	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
EN 1673:2000+A1:2009	Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
I.S. EN 1034-4:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
I.S. EN 14957:2006	FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-6:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
I.S. EN 14658:2005	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
I.S. EN 12044:2005	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13102:2006	CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
DIN EN 1974:2010-05	Food processing machinery - Slicing machines - Safety and hygiene requirements (includes Amendment A1:2009)
UNI EN 1974 : 2009	FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 909:1999	AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY
I.S. EN 12348:2000	CORE DRILLING MACHINES ON STAND - SAFETY
I.S. EN 12505:2000	FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12621:2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
DIN EN 13218:2002-09	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
I.S. EN 1010-3:2002	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES
I.S. EN 706:1997	AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY
DIN EN 1034-7:2010-06	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests (includes Amendment A1:2009)
I.S. EN 1612-2:2000	PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT
I.S. EN 12981:2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 1034-5:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
I.S. EN 13355:2005	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN 930:1998	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13985:2003	MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
I.S. EN 617:2001
I.S. EN 703:2004	AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY
I.S. EN 1034-7:2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
I.S. EN 931:1998	FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
I.S. EN 1034-14:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
I.S. EN 14466:2005	FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
I.S. EN 12012-3:2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
I.S. EN 908:1999	AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY
I.S. EN 13042-3:2007	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
I.S. EN 12653:2000	FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13389:2005	FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14018:2005	AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
I.S. EN 13019:2001	MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
DIN EN 1088:1996-02	SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
I.S. EN 12012-2:2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 1010-1:2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 415-5:2006	SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
DIN EN 1034-5:2010-07	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (includes Amendment A1:2009)
I.S. EN 1114-2:1998	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
DIN EN 13788:2002-04	MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
I.S. EN 1889-2:2003	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
I.S. EN 13112:2002	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
DIN EN 1034-4:2010-07	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (includes Amendment A1:2009)
I.S. EN 1756-1:2002	TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
I.S. EN 81-1:1999	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
DIN EN 12012-2:2004-03	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 12387:2005	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
DIN EN 1034-6:2010-07	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (includes Amendment A1:2009)
DIN EN 12957:2001-12	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
DIN EN 1845:2008-06	Footwear manufacturing machines - Footwear moulding machines - Safety requirements
I.S. EN 13021:2003	WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
I.S. EN 618:2002
I.S. EN 1845:2007	FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 620:2002
EN 415-3:1999+A1:2009	Safety of packaging machines - Part 3: Form, fill and seal machines
I.S. EN 1495:1998	LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
I.S. EN 1012-2:1996	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS
I.S. EN 1501-2:2005	REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
I.S. EN 13390:2002	FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1570:1998-08	SAFETY REQUIREMENTS FOR LIFTING TABLES
I.S. EN 1756-2:2004	TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
I.S. EN 81-2:1999	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
I.S. EN 415-7:2006	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
I.S. EN 12581:2006	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 1034-2:2010-09	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (includes Amendment A1:2009)
DIN EN 12336:2010-03	TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 1974:1998	FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14985:2012	CRANES - SLEWING JIB CRANES
UNI EN 12387 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 13390 : 2010	FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 14658 : 2010	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
VDI 4421:2000-10	Driving systems for piece goods conveying - Survey and selection
NF EN 619 : 2003 + A1 2010
DIN EN 707:2015-11 (Draft)	AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
DIN EN 12012-1:2015-05 (Draft)	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
UNI EN 415-8 : 2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
07/30161753 DC : 0	BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
03/314350 DC : 0	EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
11/30215034 DC : DRAFT MAR 2011	BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
UNI EN 12693 : 2008	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 13788:2002	MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
14/30303762 DC : 0	BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING
DIN EN 12733:2016-08 (Draft)	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
I.S. EN 12840:2001	SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
I.S. EN 115:1995	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS
BS EN 16282-4:2016	Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air inlets and outlets; design and safety requirements
08/30175637 DC : DRAFT MAR 2008	BS EN 15774 - FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 14677:2008-11	SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
BS EN 15164:2008	Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines
04/30058509 DC : DRAFT JUNE 2004	BS EN 14985 - CRANES - SLEWING JIB CRANES
12/30257298 DC : 0	BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS EN 13035-2:2008	Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment outside the factory
BS EN 415-8:2008	Safety of packaging machines Strapping machines
05/30129943 DC : 0	EN 15162 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
05/30133339 DC : DRAFT MAY 2005	EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
05/30130673 DC : DRAFT MAR 2005	BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 16282-2:2017	Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements
96/104565 DC : JUN 96	EN 12437-3 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 3: STAIRWAYS, STEPLADDERS AND GUARDRAILS
04/30110326 DC : DRAFT APR 2004	EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
04/30110543 DC : 0	EN 1845 - FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
08/30156074 DC : DRAFT APR 2008	BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
05/19981967 DC : 0	BS EN 1034-6 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: PULPERS
UNI EN 14753 : 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
14/30294092 DC : 0	BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
PD CEN/TR 15563:2017	Temporary works equipment. Recommendations for achieving health and safety
97/720418 DC : DRAFT DEC 1997	EN 1009-2 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 2: FEEDING MACHINERY
NF EN 61029-1 : 2009 AMD 11 2011	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
03/111188 DC : DRAFT AUG 2003	BS EN 1010-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
96/104566 DC : DRAFT JUN 1996	PREN 12437-4 - SAFETY OF MACHINERY - PERFORMANCE MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 4: FIXED LADDERS
05/30133297 DC : DRAFT MAY 2005	EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
05/30138432 DC : DRAFT AUG 2005	BS EN 1501-1 - REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
04/301784 DC : DRAFT JAN 2004	EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
I.S. CEN TR 15563:2007	TEMPORARY WORKS EQUIPMENT - RECOMMENDATIONS FOR ACHIEVING HEALTH AND SAFETY
UNI EN 1010-4 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
DIN EN 14753:2008-03	Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
NF EN 15746-2 : 2010 + A1 2011	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 474-1:2014-03	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 14958:2006	FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
BS EN 14958 : 2006	FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 474-1:2006	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
UNI EN 707 : 2010	AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
NF EN 13684 : 2004 + A3 2010
DIN EN 13684:2015-05 (Draft)	GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
I.S. EN 707:1999	AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
EN 13684:2004+A3:2009	Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
UNE-EN 16282-3:2017	Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements
CAN/CSA-C22.2 NO. 61010-1-12 (R2017)	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01)
BS EN 707 : 1999	AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
DIN EN 12921-1:2011-02	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
UNI EN 12733 : 2009	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
I.S. EN 15162:2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
DIN EN 13862:2010-03	Floor cutting-off machines - Safety (includes Amendment A1:2009)
I.S. EN 14886:2008	PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
BS EN 13684 : 2004	GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
DIN EN 1088:2008-10	SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
DIN EN 13140:2010-09	Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety (includes Amendment A1:2009)
UNI EN 1501-2 : 2010	REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
DIN EN 12348:2010-01	Core drilling machines on stand - Safety (includes Amendment A1:2009)
DIN EN 12312-20:2009-08	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
DIN EN 547-1:2009-01	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY
DIN EN 12505:2010-11	Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 547-2:2009-01	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS
DIN EN 12717:2009-07	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
DIN EN 1034-13:2010-07	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units (includes Amendment A1:2009)
DIN EN 786:2012-01	GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
DIN EN 13736:2009-11	SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
DIN EN 692:2009-10	Machine tools - Mechanical presses - Safety (includes Amendment A1:2009)
DIN EN 703:2009-12	Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety (includes Amendment A1:2009)
DIN EN 349:2008-09	SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
DIN EN 745:2010-01	AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
DIN EN 14017:2009-07	AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
DIN EN 930:2010-07	Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements (includes Amendment A2:2009)
DIN EN 676:2012-03 (Draft)	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 14018:2010-02	AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
DIN EN 13985:2009-11	Machine tools - Safety - Guillotine shears (includes Amendment A1:2009)
DIN EN 931:2010-07	Footwear manufacturing machines - Lasting machines - Safety requirements (includes Amendment A2:2009)
DIN EN 14658:2010-06	Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining (includes Amendment A1:2010)
BS EN 999 : 1999	SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
BS EN 115:1995	Safety rules for the construction and installation of escalators and passenger conveyors.
BS EN 909 : 1999	AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY
BS EN 12478:2001	Safety of machine tools. Large numerically controlled turning machines and turning centres
BS EN 1114-2 : 1998	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
BS EN 13898 : 2003	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
BS EN 709 : 1997	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
BS EN 292-2:1991	Safety of machinery. Basic concepts, general principles for design Technical principles and specifications
BS EN 1010-1 : 2004	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 706 : 1997	AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY
BS EN 1034-5 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
BS EN 1495 : 1998	LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
BS EN 13102 : 2005	CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
BS EN 1012-2 : 1997	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS
DIN EN 14957:2010-11	Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements (includes Amendment A1:2010)
BS EN 414:2000	Safety of machinery. Rules for the drafting and presentation of safety standards
BS EN 12505 : 2000	FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12151:2007	Machinery and plants for the preparation of concrete and mortar. Safety requirements
BS EN 1570 : 1999	SAFETY REQUIREMENTS FOR LIFTING TABLES
DIN EN 676:2008-11	Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008)
UNE-EN 61010-1:2011	Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
UNE-EN 81-2:2001	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS.
I.S. EN 547-1:1997	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY
ONORM EN 676 : 2008	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
I.S. EN 547-2:1997	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS
UNE-EN 14861:2005	Forest machinery - Self propelled machinery - Safety requirements
ISA 61010-1 : 2008	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
UNI EN 13525 : 2010	FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
EN 707:1999+A1:2009	Agricultural machinery - Slurry tankers - Safety
UNE-EN 693:2001	Machine tools - Safety - Hydraulic presses
UNE-EN 709:1997	AGRICULTURAL AND FORESTRY MACHINERY. PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S). SAFETY.
I.S. EN 349:1993	SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
EN 13985:2003+A1:2009	Machine tools - Safety - Guillotine shears
EN 618:2002+A1:2010	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
EN 909:1998+A1:2009	Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety
EN 1570:1998+A2:2009	Safety requirements for lifting tables
UNI EN 12921-1 : 2010	MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 14677 : 2008	SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
UNI EN 13288 : 2010	FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1612-2 : 2008	PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT
UNI EN 12581 : 2010	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 1010-1 : 2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN 1495 : 2009	LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
UNI EN 13042-1 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
UNI EN 709 : 2010	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
UNI EN 619 : 2011	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS
UNI EN 12203 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
UNI EN 14957 : 2010	FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 14910 : 2010	GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
UNI EN 1114-3 : 2009	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNI EN 786 : 2010	GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
UNI EN 13118 : 2010	AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY
UNI EN 547-1 : 2009	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY
UNI EN 12198-2 : 2009	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
UNI EN 791 : 2009	DRILL RIGS - SAFETY
EN 708:1996/A1:2000	AGRICULTURAL MACHINERY - SOIL WORKING MACHINES WITH POWERED TOOLS - SAFETY
EN 12312-20:2005+A1:2009	Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
UNI EN 13862 : 2009	FLOOR CUTTING-OFF MACHINES - SAFETY
UNI EN 547-2 : 2009	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS
UNI EN 13736 : 2009	SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
UNI EN 1114-2 : 2008	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
UNI EN 14017 : 2010	AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
UNI EN 692 : 2009	MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
EN 617:2001+A1:2010	Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
UNI EN 745 : 2010	AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
UNI EN 1570 : 2009	SAFETY REQUIREMENTS FOR LIFTING TABLES
UNI EN ISO 12100-2 : 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
UNI EN 13389 : 2010	FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15067 : 2008	PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
UNI EN 1845 : 2008	FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 617 : 2011	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
UNI EN 13035-3 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
UNI EN 1028-1 : 2008	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
UNI EN 12981 : 2009	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 12653 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
UNI EN 12417 : 2009	MACHINE TOOLS - SAFETY - MACHINING CENTRES
UNI EN 1034-4 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
UNI EN 13042-3 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
UNI EN 14466 : 2008	FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
UNI EN 81-2 : 2010	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
UNI EN 12012-3 : 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
UNI EN 12757-1 : 2010	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNI EN 14861 : 2010	FOREST MACHINERY - SELF PROPELLED MACHINERY - SAFETY REQUIREMENTS
UNI EN 13112 : 2010	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
UNI EN 618 : 2011	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF BULK MATERIALS EXCEPT FIXED BELT CONVEYORS
UNI EN 908 : 2010	AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY
UNI EN 1034-7 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
UNI EN 1756-2 : 2009	TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
UNI EN 1034-6 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
UNI EN 415-5 : 2010	SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
UNI EN 81-1 : 2010	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
UNI EN 1088 : 2008	SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
UNI EN 13898 : 2009	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
UNI EN 13140 : 2010	AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY
EN 547-2:1996+A1:2008	Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
UNI EN 13218 : 2008	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
UNI EN 14238 : 2009	CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
UNI EN 13000 : 2014	CRANES - MOBILE CRANES
UNI EN 931 : 2010	FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
UNI EN 930 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
UNI EN 12336 : 2009	TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 704 : 2010	AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
UNI EN 1010-3 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES
UNI EN 1889-2 : 2009	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
UNI EN 12044 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
UNI EN 999 : 2008	SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
UNI EN 1034-2 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
UNI EN 12717 : 2009	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
UNI EN 14070 : 2009	SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
UNI EN 693 : 2011	MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
UNI EN 13985 : 2009	MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
UNI EN 12957 : 2009	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
UNI EN 12012-2 : 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
UNI EN 14010 : 2009	SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES
UNI EN 1034-5 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
UNI EN 13128 : 2009	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
UNI EN 12348 : 2009	CORE DRILLING MACHINES ON STAND - SAFETY
UNI EN 14886 : 2008	PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
UNI EN 13355 : 2009	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNI EN 12215 : 2010	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN 1034-14 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
UNI EN 12621 : 2010	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNI EN 13102 : 2009	CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
UNI EN 415-7 : 2008	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
UNI EN 13448 : 2010	AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
UNI EN 909 : 2010	AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY
UNI EN 12505 : 2010	FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12198-3 : 2008	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
UNI EN 349 : 2008	SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
UNI EN 1034-13 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
UNI EN 14958 : 2009	FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 676 : 2008	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
UNI EN 1034-22 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
UNI EN 1012-2 : 2009	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS
UNI EN 14018 : 2010	AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
UNI EN 706 : 2010	AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY
UNI EN 13114 : 2010	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
UNI EN 15164 : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
UNI EN 13684 : 2010	GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
PREN 16282-7 : DRAFT 2014	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
04/30124330 DC : 0	EN 15067-1 - PLASTICS AND RUBBER MACHINES - WELDING MACHINES FOR PLASTICS - PART 1: SAFETY REQUIREMENTS FOR FILM CONVERTING MACHINES FOR BAGS AND SACKS
00/715165 DC : DRAFT OCT 2000	BS EN 13954 - FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
11/30244204 DC : 0	BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING
00/107021 DC : DRAFT OCT 2000	BS EN 1501-2 - REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
UNI EN 15162 : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
I.S. EN 692:2005	MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
97/718229 DC : DRAFT NOV 1997	PREN 13064 - CERAMIC MACHINES - SAFETY - SETTING AND DEHACKING OF HEAVY CLAY AND REFRACTORY PRODUCTS
BS EN 12012-1 : 2007	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
PREN 16282-3 : DRAFT 2014	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS
I.S. EN 12478:2000	SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
BS EN 16282-3:2016	Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements
CEI UNI EN 45510-6-8 : 2000	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-8: TURBINE AUXILIARIES - CRANES
04/30123607 DC : DRAFT OCT 2004	EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
07/30172338 DC : DRAFT DEC 2007	BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
13/30291771 DC : DRAFT DEC 2013	BS EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
08/30185056 DC : DRAFT SEP 2008	BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1501-3 : 2008	REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
DIN EN 13035-2:2008-10	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
09/30202538 DC : DRAFT JUN 2009	BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
95/710328 DC : 0	PREN 12044 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURE MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
00/706812 DC : DRAFT MAR 2000	BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
14/30303747 DC : 0	BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS
PREN 676 : DRAFT 2012	FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
07/30170114 DC : 0	BS EN 201 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
06/30156494 DC : 0	BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
04/30126179 DC : DRAFT DEC 2004	EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
02/714362 DC : DRAFT DEC 2002	EN 12312-20 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: GROUND POWER EQUIPMENT
01/711762 DC : DRAFT SEP 2001	BS EN 14238 - CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
BS EN 61029-1 : 2009	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
04/30124187 DC : 0	PREN 415-8 - SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
04/19987464 DC : 0	BS EN 15027 - TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
05/19981951 DC : 0	BS EN 1034-13 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: AUXILIARY EQUIPMENT FOR DE-WIRING BALES AND UNITS
EN 957-2:2003	Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods
BS EN 16282-2:2016	Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements
14/30298212 DC : 0	BS EN 12453 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS
I.S. EN 14753:2007	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
11/30244207 DC : 0	BS EN 16282-6 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS - DESIGN AND SAFETY REQUIREMENTS
96/107552 DC : DRAFT OCT 1996	BS EN 12609 - TRUCKMIXERS - SAFETY REQUIREMENTS
97/720420 DC : DRAFT DEC 1997	EN 1009-4 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 4: SIZING AND SORTING MACHINERY
14/30303759 DC : 0	BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
BS EN 14886:2008	Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements
95/710329 DC : DRAFT JUL 1995	PREN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
03/112610 DC : DRAFT AUG 2003	EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY
07/30161910 DC : 0	BS EN 15649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES
00/705761 DC : DRAFT FEB 2000	PREN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
01/105375 DC : DRAFT JUL 2001	BS EN 474-3 EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS
I.S. EN 12693:2008	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 16282-4:2016	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS
BS EN 474-1 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 13684:2004	GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
EN 12012-1:2007+A1:2008	Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators
DIN EN 81-80:2004-02	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS
BS EN 474-1:2006+A6:2019	Earth-moving machinery. Safety General requirements
EN 1756-1:2001+A1:2008	Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
PREN 16282-8 : DRAFT 2014	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING
I.S. EN 16282-3:2016	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
DIN EN 12693:2016-10 (Draft)	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
DIN EN 12757-1:2011-02	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
BS EN 12965 : 2003	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
I.S. EN 12733:2001	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
BS EN 12301 : 2000	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN 14985:2012-05	Cranes - Slewing jib cranes
NF EN 1974 : 1998 + A1 2009	FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 81-80:2004	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS
NF EN 13525 : 2005 + A2 2009	FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
I.S. EN 12301:2000	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
EN 13035-3:2003	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
UNI EN 12965 : 2010	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
DIN EN 908:2009-12	Agricultural and forestry machinery - Reel machines for irrigation - Safety (includes Amendment A1:2009)
EN 620:2002+A1:2010	Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
DIN EN 415-3:2010-07	Safety of packaging machines - Part 3: Form, fill and seal machines (includes Amendment A1:2009)
DIN EN 13814:2005-06	FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
DIN EN 618:2011-06	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
DIN EN 1114-3:2015-12 (Draft)	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
DIN EN 706:2009-12	Agricultural machinery - Vine shoot tipping machines - Safety (includes Amendment A1:2009)
BS EN 547-2 : 1997	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS
10/30216944 DC : 0	BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
BS EN 415-5 : 2006	SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
BS EN 547-1 : 1997	SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY
BS EN 1010-3 : 2002	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES
BS EN 1612-2 : 2000	PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT
BS EN 1028-1 : 2002	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
BS EN 415-4:1998	Safety of packaging machines Palletizers and depalletizers
UNE-EN 12621:2006	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
DIN EN 12301:2010-02	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN 957-2:2003	Stationary training equipment Strength training equipment,additional specific safety requirements and test methods
BS EN 13525 : 2005	FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
BS EN 13389 : 2005	FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 908 : 1999	AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY
BS EN 1889-2 : 2003	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
BS EN 12417 : 2001	MACHINE TOOLS - SAFETY - MACHINING CENTRES
BS EN 12840:2001	Safety of machine tools. Manually controlled turning machines with or without automatic control
BS EN 931 : 1998	FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
BS EN 415-3 : 2000	SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
BS EN 1756-2 : 2004	TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
BS EN 619 : 2002
BS EN 13736 : 2003	SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
BS EN 703 : 2004	AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY
BS EN 1010-4 : 2004	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
BS EN 12336 : 2005	TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
BS EN 12621 : 2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
BS EN 1034-4 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
BS EN 13112 : 2002	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
BS EN 12312-20 : 2005	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
UNE-EN 13288:2006	Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
BS EN 81-1 : 1998	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
EN 13525:2005+A2:2009	Forestry machinery - Wood chippers - Safety
BS EN 1553:2000	Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements
BS EN 1034-6 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
BS EN 12012-3 : 2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
BS EN 349 : 1993	SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
BS EN 13140 : 2000	AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY
BS EN 13042-1 : 2007	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
BS EN 81-2 : 1998	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
BS EN 930 : 1997	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
BS EN 13021 : 2003	WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
BS EN 12717 : 2001	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
UNE-EN 13114:2002	Tannery machines- Rotating process vessels - Safety requirements.
BS EN 1034-2 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
BS EN 13985 : 2003	MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
UNE-EN 12505:2001	FOOD PROCESSING MACHINERY. CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS. SAFETY AND HYGIENE REQUIREMENTS
BS EN 14985:2012	Cranes. Slewing jib cranes
BS EN 13288 : 2005	FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12348 : 2000	CORE DRILLING MACHINES ON A STAND - SAFETY
BS EN 1756-1 : 2001	TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
BS EN 415-7 : 2006	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
BS EN 693 : 2001	MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
UNI EN 12301 : 2008	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN 14070 : 2003	SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
BS EN 14010 : 2003
UNE-EN 619:2003	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads.
UNE-EN 617:2002	Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers.
BS EN 12044 : 2005	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
BS EN 12415:2001	Safety of machine tools. Small numerically controlled turning machines and turning centres
BS EN 12957 : 2001	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
UNE-EN 13112:2002	Tannery machines - Splitting and bandknife shearing machines - Safety requirements.
BS EN 13788:2002	Machine tools. Safety. Multi-spindle automatic turning machines
BS EN 676 : 2003	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
UNE-EN 13000:2010	Cranes - Mobile cranes
BS EN 13114 : 2002	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
BS EN 13862 : 2001	FLOOR CUTTING-OFF MACHINES - SAFETY
BS EN 1034-7 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
BS EN ISO 11111:1996	Safety requirements for textile machinery
I.S. EN 13525:2005	FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
UNE-EN 1756-2:2005	Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
BS EN 1114-3 : 2001	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNE-EN 13525:2005	Forestry machinery - Wood chippers - Safety
UNE-EN 13140:2001	AGRICULTURAL MACHINERY. SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT. SAFETY.
UNE-EN 13389:2006	Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements.
09/30205281 DC : 0	BS EN 50191 - ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT
BS EN 1088 : 1995	SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
UNE-EN 620:2002	Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
BS EN 791 : 1996	DRILL RIGS - SAFETY
UNE-EN 618:2002	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors.
ISO 11111-7:2005	Textile machinery Safety requirements Part 7: Dyeing and finishing machinery
DIN EN 999:2008-10	SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEED OF PARTS OF THE HUMAN BODY
DIN EN 81-2:2010-08	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
EN 908:1999+A1:2009	Agricultural and forestry machinery - Reel machines for irrigation - Safety
EN 706:1996+A1:2009	Agricultural machinery - Vine shoot tipping machines - Safety
EN 13140:2000+A1:2009	Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety
EN 13788 : 2001	MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
EN 292-2 : 91 AMD 1 95	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
EN 13814:2004	Fairground and amusement park machinery and structures - Safety
EN 692:2005+A1:2009	Machine tools - Mechanical presses - Safety
EN 14861:2004+A1:2009	Forest machinery - Self propelled machinery - Safety requirements
EN 15067:2007	Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
EN 907 : 1997	AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - SAFETY
EN 619:2002+A1:2010	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
EN 14466:2005+A1:2008	Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests
EN 415-7:2006+A1:2008	Safety of packaging machines - Part 7: Group and secondary packaging machines
EN 415-8:2008	Safety of packaging machines - Part 8: Strapping machines
EN 14985:2012	Cranes - Slewing jib cranes
EN 81-2 : 1998 + A3 2009	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
EN 14910:2007+A1:2009	Garden equipment - Walk-behind combustion engine powered trimmers - Safety
EN 15164:2008	Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines
EN 999:1998+A1:2008	Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
UNI EN 13021 : 2009	WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
EN 1612-2:2000+A1:2008	Plastics and rubber machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant
EN 14238:2004+A1:2009	Cranes - Manually controlled load manipulating devices
EN 14957:2006+A1:2010	Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements
EN 12581:2005+A1:2010	Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
EN 1756-2:2004+A1:2009	Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
EN 930:1997+A2:2009	Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
EN 15333-1:2006/AC:2009	FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
EN 1870-2:1999/AC:2002	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
EN 811 : 1996	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
EN 14017:2005+A2:2009	Agricultural and forestry machinery - Solid fertilizer distributors - Safety
EN 632 : 1995	AGRICULTURAL MACHINERY - COMBINE HARVESTERS AND FORAGE HARVESTERS - SAFETY
EN 15162:2008	Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws
EN 81-1:1998+A3:2009	Safety rules for the construction and installation of lifts - Part 1: Electric lifts
EN 774:1996/A3:2001	GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
EN 1845:2007	Footwear manufacturing machines - Footwear moulding machines - Safety requirements
UNI EN 13019 : 2009	MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
EN 547-1:1996+A1:2008	Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN 693 : 2001 COR 2011	MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
EN 14753:2007	Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
EN 704:1999+A1:2009	Agricultural machinery - Pick-up balers - Safety
EN 14886:2008	Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
EN 1553 : 1999	AGRICULTURAL MACHINERY - AGRICULTURAL SELF-PROPELLED, MOUNTED, SEMI-MOUNTED AND TRAILED MACHINES - COMMON SAFETY REQUIREMENTS
EN 791:1995+A1:2009	Drill rigs - Safety
EN 14677:2008	Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
EN 745:1999+A1:2009	Agricultural machinery - Rotary mowers and flail-mowers - Safety
EN 1889-2:2003+A1:2009	Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
EN 14010:2003+A1:2009	Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
EN 349:1993+A1:2008	Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 14018:2005+A1:2009	Agricultural and forestry machinery - Seed drills - Safety
EN 415-5:2006+A1:2009	Safety of packaging machines - Part 5: Wrapping machines
EN 786:1996+A2:2009	Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety
EN 13390:2002+A1:2009	Food processing machinery - Pie and tart machines - Safety and hygiene requirements
EN 1454 : 1997	PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY
EN 1012-2:1996+A1:2009	Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
EN 931:1997+A2:2009	Footwear manufacturing machines - Lasting machines - Safety requirements
EN 1028-1:2002+A1:2008	Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements
EN 14658:2005+A1:2010	Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining
EN 13736:2003+A1:2009	Safety of machine tools - Pneumatic presses
I.S. EN 12012-4:2006	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
05/30129951 DC : 0	EN 15164 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
I.S. EN 13814:2005	FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
PREN 12693 : DRAFT 1996	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS
11/30244198 DC : 0	BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
I.S. EN 774:1996	GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
PREN 16282-4 : DRAFT 2014	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS
04/30111716 DC : DRAFT MAR 2004	EN 14910 - GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
03/306044 DC : DRAFT APR 2003	BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
09/30187535 DC : 0	BS EN 13000 - CRANES - MOBILE CRANES
05/30076959 DC : DRAFT APR 2005	BS EN 12453 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER-OPERATED DOORS - REQUIREMENTS
03/306594 DC : DRAFT APR 2003	BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE
03/306595 DC : 0	BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
98/717506 DC : DRAFT DEC 1998	PREN 13389 - FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 415-8:2011-06	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
I.S. EN 12417:2001	MACHINE TOOLS - SAFETY - MACHINING CENTRES
14/30303744 DC : 0	BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS
04/30113996 DC : 0	PREN 81-41 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
97/700976 DC : DRAFT JAN 1997	PREN 12692 - CERAMIC MACHINES - SAFETY - PRESSES
08/30180969 DC : DRAFT APR 2008	BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
02/706761 DC : DRAFT MAY 2002	PREN 14461 - INDUSTRIAL FANS - SAFETY REQUIREMENTS
00/717064 DC : DRAFT NOV 2000	PREN 14070 - SAFETY OF MACHINES TOOLS - TRANSFER AND SPECIAL PURPOSE MACHINES
DIN EN 15746-2:2016-02 (Draft)	Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
11/30244201 DC : 0	BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS
11/30244213 DC : 0	BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES - REQUIREMENTS AND TESTING
06/30156491 DC : 0	BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
07/30166058 DC : 0	BS EN 15700 - SAFETY OF TRAVELATORS FOR TOURIST OR SPORTING USE, USED TO TRANSPORT PASSENGERS MAINLY IN SKI AREAS
97/700630 DC : DRAFT JAN 1997	PREN 12693 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS
06/30147145 DC : 0	EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
BS ISO 20957-2:2005	Stationary training equipment Strength training equipment. Additional specific safety requirements and test methods
00/708470 DC : DRAFT APR 2000	PREN 13886 - FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH STIRRER AND/OR MIXER - SAFETY AND HYGIENE
07/30164729 DC : 0	BS EN 12999 - CRANES - LOADER CRANES
PREN 16282-2 : DRAFT 2014	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS
96/108461 DC : 0	PREN 12649 - CONCRETE COMPACTORS AND FLOATING MACHINES - SAFETY REQUIREMENTS
05/19981969 DC : DRAFT JUN 2005	BS EN 1034-5 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
02/711304 DC : DRAFT SEP 2002	BS EN 415-5 - PACKAGING MACHINES SAFETY - PART 5: WRAPPING MACHINES
02/705139 DC : DRAFT APR 2002	PREN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
08/30179926 DC : DRAFT MAR 2008	BS EN 60335-2-77 - SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
04/30113842 DC : DRAFT MAY 2004	PREN 14957 - FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 13035-2:2008	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
BS EN 14017 : 2005	AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
EN 13000:2010+A1:2014	Cranes - Mobile cranes
DIN EN 1853:2015-11 (Draft)	AGRICULTURAL MACHINERY - TRAILERS WITH TIPPING BODY - SAFETY
NFP 82 212 : 2005	LIFTS - SAFETY RULES FOR THE CONSTRUCTIONS AND INSTALLATION OF ELECTRIC LIFTS - SPECIFICATIONS APPLICABLE IN THE CASE OF THE IMPORTANT MODIFICATIONS OR IMPROVEMENT WORK
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
BS EN 12733 : 2001	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
I.S. EN 415-8:2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
BS EN 15746-2 : 2010	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 14677:2008	SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
15/30279801 DC : 0	BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
EN 12301:2000+A1:2008	Plastics and rubber machines - Calenders - Safety requirements
DIN EN 619:2011-02	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads (includes Amendment A1:2010)
EN 12733:2001+A1:2009	Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
I.S. EN 12012-1:2007	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
I.S. EN 676:2003	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 13390:2011-02	Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 13448:2010-02	Agricultural and forestry machinery - Inter-row mowing units - Safety (includes Amendment A1:2009)
DIN EN 12012-4:2010-01	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
DIN EN 1028-1:2008-09	FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
DIN EN 12198-3:2008-11	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
DIN EN 1501-2:2010-02	Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles (includes Amendment A1:2009)
DIN EN 709:2011-06	Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety (includes Amendment A4:2009)
BS EN 745 : 1999	AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
BS EN 12012-4 : 2006	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
DIN EN 1889-2:2009-07	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
BS EN 13019 : 2001	MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
BS EN 14957 : 2006	FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1845:2007	Footwear manufacturing machines. Footwear moulding machines. Safety requirements
BS EN 1034-13 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
BS EN 13200-4:2006	Spectator facilities Seats. Product characteristics
BS EN 692 : 2005	MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
BS EN 13814:2004	Fairground and amusement park machinery and structures. Safety
BS EN 12581 : 2005	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 12012-2 : 2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
BS EN 1454:1997	Portable, hand-held, internal combustion cutting-off machines. Safety
ISO 11111-3:2005	Textile machinery Safety requirements Part 3: Nonwoven machinery
BS EN 1034-22 : 2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
BS EN 617 : 2001
BS EN 14910 : 2007	GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
BS EN 14658 : 2005	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
BS EN 13390 : 2002	FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12921-1 : 2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
DIN EN 12693:2008-09	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
EN 1114-3:2001+A1:2008	Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
EN 1034-22:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders
DIN EN 704:1999-08	AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
EN 13288:2005+A1:2009	Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
EN 1034-14:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
EN 12415:2000/A1:2002	SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
EN 12981:2005+A1:2009	Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 12387:2005+A1:2009	Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
DIN EN 13035-1:2008-06	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
EN 61029-1:2009/A11:2010	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
DIN EN 745:1999-08	AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
EN 13019:2001+A1:2008	Machines for road surface cleaning - Safety requirements
UNI EN 1756-1 : 2008	TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
DIN EN 1114-2:1998-06	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
EN 1034-4:2005+A1:2009	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
DIN EN 14886:2008-06	Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
UNI EN 620 : 2011	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR FIXED BELT CONVEYORS FOR BULK MATERIALS
EN 12348:2000+A1:2009	Core drilling machines on stand - Safety
EN 13862:2001+A1:2009	Floor cutting-off machines - Safety
DIN EN 81-1:2000-05	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
DIN EN 81-1:2010-06	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
EN 13200-4:2006	Spectator facilities - Part 4: Seats - Product characteristics
DIN EN 13898:2009-09	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
EN 12957:2001+A1:2009	Machine tools - Safety - Electro discharge machines
EN 12840 : 2001	SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
EN 1501-2:2005+A1:2009	Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
DIN EN 14861:2011-06	FOREST MACHINERY - SELF PROPELLED MACHINERY - SAFETY REQUIREMENTS
DIN EN 12151:2008-05	MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
EN 13035-1:2008	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
EN 13389:2005+A1:2009	Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements
EN 1501-3:2008	Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
DIN EN 15746-2:2011-12	Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
DIN EN 12012-1:2010-02	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
DIN EN 704:2009-12	AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
UNE-EN 415-3:2000	Safety of packaging machines. Part 3: Form, fill and seal machines.
UNE-EN 1034-5:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
UNE-EN 1034-2:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
UNE-EN 12203:2004	Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
UNE-EN 13390:2002	Food processing machinery- Pie and tart machines - Safety and hygiene requirements.
UNE-EN 12757-1:2006+A1:2010	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
UNE-EN 1501-2:2006	Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
UNE-EN 1673:2001	Food procesing machinery. Rotatory rack ovens. Safety and hygiene requirements.
UNE-EN 1034-22:2006	Safety of machinerie - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders
UNE-EN 15746-2:2011	Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
UNE-EN 1010-4:2004	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
UNE-EN 12757-1:2006	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
UNE-EN 14658:2006	Continuous handling equipment and systems. General safety requirements for continuous handling equipment for opencast lignite mining
UNE-EN 415-5:2007	Safety of packaging machines - Part 5: Wrapping machines
UNE-EN 1010-3:2003	Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Part 3: Cutting machines.
UNE-EN 1034-6:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
UNE-EN 12044:2006	Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
UNE-EN 1034-14:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
UNE-EN 1034-7:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
UNE-EN 1034-4:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
UNE-EN 14018:2006	Agricultural and forestry machinery - Seed drills - Safety
UNE-EN 1034-13:2006	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
UNE-EN 1012-2:1996	COMPRESSORS AND VACUUM PUMPS. SAFETY REQUIREMENTS. PART 2: VACUUM PUMPS.

EN 292-1 : 1991	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
AS 4024.3701:2020	Safety of machinery Forestry machinery - Wood chippers - Safety (EN 13525:2005+A2:2009, MOD)

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Shopping Cart

EN 294:1992/AC:1993

SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS

Shopping Cart

EN 294:1992/AC:1993

SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory