EN 29002 : 1994
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN PRODUCTION & INSTALLATION
Superseded date
03-17-2022
Superseded by
Published date
01-12-2013
Publisher
Sorry this product is not available in your region.
Specifies quality system requirements to be used where a contract between two parties requires demonstration of a supplier's capacity to control the processes that determine the acceptability of the supplied product. The specified requirements should primarily detect and prevent any nonconformity during production and installation and implement the means to prevent its recurrence. Applies in contracts when: confidence in product conformance can be reached by satisfactory demonstration of a certain supplier's capabilities in installation and production; the specified requirements for product are stated as a specification or as an established design. Covers quality system requirements such as Management Responsibility, Quality System, Document Control, Contract Review and Training.
| Committee |
CEN/CS F20
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN ISO 9002:1990-05 | Identical |
| NBN EN 28662-2 : 1994 AMD 2 2001 | Identical |
| NBN EN 28662-3 : 1994 AMD 2 2002 | Identical |
| NBN EN 10210-1 : 2006 | Identical |
| BS 5750-2:1987 | Identical |
| 96/103098 DC : DRAFT APRIL 1996 | PREN 1856-2 - CHIMNEYS - PERFORMANCE REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL LINERS AND CONNECTING FLUE PIPE PRODUCTS |
| 96/709570 DC : DRAFT JUL 1996 | PREN 10285 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYETHYLENE BASED COATINGS |
| PREN 1825-1 : DRAFT 1995 | INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| BS EN 50206-2:2010 | Railway applications. Rolling stock. Pantographs. Characteristics and tests Pantographs for metros and light rail vehicles |
| BS EN 729-2:1995 | Quality requirements for welding. Fusion welding of metallic materials Comprehensive quality requirements |
| DIN EN 729-1:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 1: GUIDELINES FOR SELECTION AND USE |
| DIN EN 729-2:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS |
| I.S. EN 10242:1995 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| EN 124:1994 | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| EN 50206-2:2010 | Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
| DEFSTAN 61-3/5(1992) : INTERIM | GENERIC SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY |
| I.S. EN 50206-2:2010 | RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS: CHARACTERISTICS AND TESTS - PART 2: PANTOGRAPHS FOR METROS AND LIGHT RAIL VEHICLES |
| 95/102726 DC : DRAFT MARCH 1995 | PREN 1873 - PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS WITH UPSTANDS |
| DIN V VDE 0829-522 : 1994 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 522: TWISTED PAIR CLASS 1; PHYSICAL LAYER |
| 03/102517 DC : 0 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS - REQUIREMENTS AND TEST METHODS |
| DD ENV 12647:1997 | Bar coding. Test specifications for bar code verifiers |
| DD ENV 61111:2002 | Matting of insulating material for electrical purposes |
| BS EN 3-6:1996 | Portable fire extinguishers Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5 |
| DIN EN 729-4:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 4: ELEMENTARY QUALITY REQUIREMENTS |
| DIN EN 729-3:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 3: STANDARD QUALITY REQUIREMENTS |
| 96/709571 DC : DRAFT JUL 1996 | PREN 10286 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYPROPYLENE BASED COATINGS |
| 97/102971 DC : DRAFT APR 1997 | PREN 12843 - PRECAST CONCRETE MASTS AND POSTS |
| I.S. EN 61243-2:1999 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| 97/100665 DC : DRAFT JAN 1997 | PREN 12725 - GLASS IN BUILDING - GLASS BLOCK WALLS - DESIGN, DIMENSIONS AND PERFORMANCE |
| 95/101288 DC : DRAFT FEB 1995 | PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| 03/118986 DC : DRAFT NOV 2003 | EN 14797 - EXPLOSION VENTING DEVICES |
| 97/107906 DC : DRAFT DEC 1997 | PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: ACTIONS, REQUIREMENTS AND TERMINOLOGY |
| DIN EN 512:1994-11 | FIBRE-CEMENT PRODUCTS - PRESSURE PIPES AND JOINTS |
| EN 724 : 1994 | GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR NON-ACTIVE MEDICAL DEVICES |
| ENV 12647 : DRAFT 1997 | BAR CODING - TEST SPECIFICATIONS FOR BAR CODE VERIFIERS |
| 96/108457 DC : DRAFT NOV 1996 | PREN 12650-2 - BUILDING HARDWARE - POWERED PEDESTRIAN DOORS - PART 2: SAFETY AT POWERED PEDESTRIAN DOORS |
| 95/104349 DC : DRAFT MAY 1995 | PREN 40-4 - LIGHTING COLUMNS - PART 4: SPECIFICATION FOR REINFORCED AND PRESTRESSED CONCRETE LIGHTING COLUMNS |
| NF ENV 1090-1 : 96 FD | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| 01/541305 DC : DRAFT OCT 2001 | BS EN 12101-6 - SMOKE AND HEAT CONTROL SYSTEMS - PART 6: PRESSURE DIFFERENTIAL SYSTEMS - KITS |
| CEI EN 50103 : 1996 | GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR THE ACTIVE (INCLUDING ACTIVE IMPLANTABLE) MEDICAL DEVICE INDUSTRY |
| 93/108873 DC : DRAFT OCT 1993 | PREN 1168 - FLOOR ON PRECAST PRESTRESSED HOLLOW CORE ELEMENTS |
| BS EN 46003:1999 | Quality systems. Medical devices. Particular requirements for the application of EN ISO 9003 |
| 95/105293 DC : DRAFT JUL 95 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES AND DIMENSIONAL TOLERANCES |
| BS EN 61243-2:1998 | Live working. Voltage detectors Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
| DIN EN 10242:1995-03 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| BS EN 639:1995 | Common requirements for concrete pressure pipes including joints and fittings |
| UNE-EN 50206-2:2011 | Railway applications - Rolling stock - Pantographs: Characteristics and tests -- Part 2: Pantographs for metros and light rail vehicles |
| BS EN 512:1995 | Fibre-cement products. Pressure pipes and joints |
| EN 928 : 1995 | IN VITRO DIAGNOSTIC SYSTEMS - GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR IN VITRO DIAGNOSTIC MEDICAL DEVICES |
| EN 556:1994 + A1:1998 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR TERMINALLY-STERILIZED MEDICAL DEVICES TO BE LABELLED "STERILE" |
| EN 639:1994 | Common requirements for concrete pressure pipes including joints and fittings |
| EN 3-6:1995/A1:1999 | PORTABLE FIRE EXTINGUISHERS - PROVISIONS FOR THE ATTESTATION OF CONFORMITY OF PORTABLE FIRE EXTINGUISHERS IN ACCORDANCE WITH EN 3 PART 1 TO PART 5 |
| EN 552:1994/A2:2000 | STERILIZATION OF MEDICAL DEVICES - VALIDATION AND ROUTINE CONTROL OF STERILIZATION BY IRRADIATION |
| EN 729-2 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - COMPREHENSIVE QUALITY REQUIREMENTS |
| EN 729-3 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - STANDARD QUALITY REQUIREMENTS |
| 96/106381 DC : DRAFT AUG 1996 | PREN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| I.S. EN 124:1994 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - DESIGN REQUIREMENTS, TYPE TESTING, MARKING, QUALITY CONTROL |
| DD ENV 61112:2002 | Blankets of insulating material for electrical purposes |
| 96/709572 DC : DRAFT JUL 1996 | PREN 10287 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL FUSED POLYETHYLENE BASED COATINGS |
| 96/108458 DC : DRAFT NOV 1996 | PREN 12650-1 - BUILDING HARDWARE - POWERED PEDESTRIAN DOORS - PART 1: PRODUCT REQUIREMENTS AND TEST METHODS |
| 08/30183804 DC : DRAFT JUNE 2008 | BS EN 50206-2 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 2: PANTOGRAPHS FOR METROS AND LIGHT RAIL VEHICLES |
| 97/102206 DC : DRAFT MAR 1997 | PREN 12794 - PRECAST CONCRETE FOUNDATION PILES |
| BS 7159:1989 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| EN 61243-2:1997/A2:2002 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.