EN 2516:1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys
Superseded date
01-08-2020
Superseded by
Published date
03-19-1997
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Purpose of process
3 Normative references
4 Classification
5 Information for the processor
6 Condition of the parts prior to processing
7 Pre-treatments
8 Treatment
9 Required characteristics and inspection
10 Quality assurance
11 Health, safety and environmental aspects
12 Designation
This standard specifies several chemical methods of passivation for corrosion resistant steels (austenitic, ferritic, martensitic and precipitation hardenable) and of decontamination for nickel base alloys.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 2516. (11/2003)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 2358 : 1993 | Identical |
| NS EN 2516 : 1ED 1997 | Identical |
| NBN EN 2569 : 1993 | Identical |
| NBN EN 2361 : 1993 | Identical |
| NBN EN 2360 : 1993 | Identical |
| NBN EN 2362 : 1993 | Identical |
| NBN EN 2653 : 1996 | Identical |
| NBN EN 2948 : 1996 | Identical |
| NBN EN 2363 : 1993 | Identical |
| NBN EN 2516 : 1997 | Identical |
| NBN EN 2874 : 1996 COR 1996 | Identical |
| NBN EN 2139 : 1992 | Identical |
| DIN EN 2516:1997-05 | Identical |
| UNE-EN 2516:1997 | Identical |
| NF EN 2516 : 1997 | Identical |
| BS EN 2516:1997 | Identical |
| NBN EN 2354 : 1993 | Identical |
| NBN EN 2367 : 1993 | Identical |
| NBN EN 2353 : 1993 | Identical |
| NEN EN 2516 : 1997 | Identical |
| PN EN 2516 : 2000 | Identical |
| SNV DIN EN 2516 : 1997 | Identical |
| I.S. EN 2516:1997 | Identical |
| NBN EN 2914 : 1996 | Identical |
| NBN EN 2356 : 1993 | Identical |
| NBN EN 2357 : 1993 | Identical |
| UNI EN 2516 : 1998 | Identical |
| ONORM EN 2516 : 1997 | Identical |
| DS EN 2516 : 1997 | Identical |
| BS EN 4803:2017 | Aerospace series. Flange couplings. Swivel flange with 4 fastening holes, in heat resisting steel. Inch series |
| 11/30244475 DC : 0 | BS EN 4234 - AEROSPACE SERIES - CLAMPS, WORM DRIVE - DIMENSIONS, MASSES |
| BS EN 3016:2008 | Aerospace series. Washers countersunk, load spreading. Heat resisting steel |
| I.S. EN 4807:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, 90 DEGREES ELBOW, IN HEAT RESISTING STEEL - INCH SERIES |
| BS EN 6092:2016 | Aerospace series. Receptacle, floating, double lug |
| BS EN 4812:2017 | Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes. Inch series |
| I.S. EN 2869:2009 | AEROSPACE SERIES - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 4807:2017 | Aerospace series. Flange couplings. Weld coupling, 90° elbow, in heat resisting steel. Inch series |
| NF EN 4634 : 2010 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| BS EN 4297:2017 | Aerospace series. Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated. Classification: 900 MPa (at ambient temperature) / 120 °C |
| BS EN 4710-04:2015 | Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. One way tolerance compensation |
| BS EN 3033:2008 | Aerospace series. Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated. Classification: 1100 MPa/425°C |
| I.S. EN 3278:2012 | AEROSPACE SERIES - SLEEVES, TUBULAR, PROTRUDING HEAD, IN CORROSION RESISTING STEEL, PASSIVATED (0,25 MM WALL THICKNESS) |
| BS EN 4810:2017 | Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes. Inch series |
| PREN 2922 : 200P3 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED, LEFT HAND THREAD - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 3016 : 200P1 | AEROSPACE SERIES - WASHERS COUNTERSUNK, LOAD SPREADING - HEAT RESISTING STEEL |
| PREN 3140 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES |
| PREN 4803 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 4 FASTENING HOLES, IN HEAT RESISTING STEEL - INCH SERIES |
| PREN 3138 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID 100 DEGREES COUNTERSUNK NORMAL HEAD WITH DOME, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES |
| PREN 2881 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FUEL RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN CORROSION RESISTING STEEL, PASSIVATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 2546 : 200P1 | AEROSPACE SERIES - WASHERS, LOCK WITH RADIAL SERRATIONS IN CORROSION RESISTING STEEL PASSIVATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| PREN 4804 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 4 FASTENING HOLES, IN NICKEL ALLOY - INCH SERIES |
| PREN 4810 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL ON HEAT RESISTING STEEL PLATE WITH 3 FASTENING HOLES - INCH SERIES |
| PREN 4710-04 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP - ONE WAY TOLERANCE COMPENSATION |
| PREN 4805 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, STRAIGHT, IN HEAT RESISTING STEEL - INCH SERIES |
| PREN 4498 : 200P1 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4590 : 200P1 | AEROSPACE SERIES - RETAINERS, SPRING, SHEET METAL, FOR SELF-LOCKING BARREL NUTS, IN CORROSION RESISTING STEEL, PASSIVATED |
| PREN 3766 : 200P1 | AEROSPACE SERIES - RIVETS, BLIND, NUT PLATE, UNIVERSAL HEAD, IN HEAT RESISTING STEEL, PASSIVATED, METRIC SERIES |
| PREN 4812 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL ON HEAT RESISTING STEEL PLATE WITH 4 FASTENING HOLES - INCH SERIES |
| PREN 4077 : 200P2 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 4113 : 200P2 | AEROSPACE SERIES - CLAMPS, LOOP ("P" TYPE) IN CORROSION RESISTING STEEL, PASSIVATED, WITH RUBBER CUSHIONING - DIMENSIONS, MASSES |
| PREN 6094 : 200P2 | AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
| PREN 4112 : 200P2 | PINS, PARALLEL, IN CORROSION RESISTING STEEL, PASSIVATED |
| I.S. EN 4805:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, STRAIGHT, IN HEAT RESISTING STEEL - INCH SERIES |
| PREN 3778 : 200P1 | AEROSPACE SERIES - PINS, QUICK RELEASE, TWO BALLS, DOUBLE ACTING, SINGLE LOCKING, "L" TYPE HANDLE, IN CORROSION RESISTING STEEL |
| PREN 3845 : 200P1 | AEROSPACE SERIES - RINGS, RETAINING, RADIAL MOUNTING, IN CORROSION RESISTING STEEL, PASSIVATED |
| PREN 6090 : 200P1 | AEROSPACE SERIES - WASHER, RETAINING |
| PREN 4234 : 200P4 | AEROSPACE SERIES - CLAMPS, WORM DRIVE - DIMENSIONS, MASSES |
| PREN 4801 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 3 FASTENING HOLES, IN HEAT RESISTING STEEL - INCH SERIES |
| PREN 4806 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, STRAIGHT, IN NICKEL ALLOY - INCH SERIES |
| PREN 6093 : 200P1 | AEROSPACE SERIES - RECEPTACLE, FLOATING, SINGLE LUG |
| PREN 3821 : 200P2 | AEROSPACE SERIES - WASHERS, CHAMFERED, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 3835 : 200P1 | AEROSPACE SERIES - WASHERS, 100 DEGREES DIMPLED, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 4303 : 200P1 | AEROSPACE SERIES - SLEEVES, TUBULAR, FOR TENSION SCREWS WITH FLUSH HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, (0,25 MM WALL THICKNESS) |
| PREN 3908 : 200P2 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
| PREN 4306 : 200P1 | AEROSPACE SERIES - SLEEVES, TUBULAR, FOR TENSION SCREWS WITH FLUSH HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, (0,50 MM WALL THICKNESS) |
| PREN 3764 : 200P2 | AEROSPACE SERIES - WASHERS, CONCAVE, IN HEAT RESISTING STEEL, PASSIVATED |
| I.S. EN 4803:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 4 FASTENING HOLES, IN HEAT RESISTING STEEL - INCH SERIES |
| I.S. EN 4710-06:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 06: STUD - QUICK-RELEASE AND LOCKING |
| I.S. EN 4710-05:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 05: SPRING CLAMP - TWO WAYS TOLERANCE COMPENSATION |
| BS EN 4710-03:2015 | Aerospace series. Quick release fastening systems for non-structural applications Spring clamp |
| I.S. EN 3908:2017 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
| I.S. EN 4635:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| NF EN 4075 : 2008 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, METRIC - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| ISO 22438:2018 | Aerospace series Pipe coupling 830' in titanium alloy Thrust wires |
| BS EN 2888:2006 | Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) / 425°C |
| BS EN 3052:2009 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| BS EN 6105:2016 | Aerospace series. Stud with shoulder |
| BS EN 3444:2006 | Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1250 MPa (at ambient temperature) / 650°C |
| BS EN 2650:1997 | Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) /425°C |
| BS EN 2569:1991 | Control cable fittings and turnbarrels. Technical specification |
| BS EN 3139:2001 | Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series |
| BS EN 4113:2009 | Aerospace series. Clamps, loop (\'P\' type) in corrosion resisting steel, passivated, with rubber cushioning. Dimensions, masses |
| I.S. EN 2852:2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| I.S. EN 4297:2017 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY PLASTIC RING, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREE C |
| 98/714592 DC : DRAFT SEP 1998 | PREN 4303 - AEROSPACE SERIES - SLEEVES, TUBULAR, FOR TENSION SCREWS AND BOLTS WITH FLUSH HEAD, IN CORROSION RESISTING STEEL, PASSIVATED (0,25 MM WALL THICKNESS) |
| 14/30299616 DC : 0 | BS EN 4474 - AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS - COATING METHODS |
| I.S. EN 6094:2016 | AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
| 09/30206916 DC : 0 | BS EN 2546 - AEROSPACE SERIES - WASHERS, LOCK WITH RADIAL SERRATIONS IN CORROSION RESISTING STEEL PASSIVATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| BS EN 4802:2017 | Aerospace series. Flange couplings. Swivel flange with 3 fastening holes, in nickel alloy. Inch series |
| NF EN 4635 : 2010 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| I.S. EN 3843:2010 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| I.S. EN 2883:2009 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4804:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 4 FASTENING HOLES, IN NICKEL ALLOY - INCH SERIES |
| PREN 6092 : 200P2 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| PREN 6089 : 200P2 | AEROSPACE SERIES - WASHER, RETAINING, FOR USAGE WITH STUD EN 6088 |
| PREN 4474 : 200P2 | AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS - COATING METHODS |
| NF EN 2852 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| PREN 3033 : 200P1 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA92HT (A286), UNCOATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| PREN 3034 : 200P1 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| XP PREN 4167 : 1995 XP | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - INNER CLIPS IN HEAT RESISTING STEEL FE-PA92HT (A286) |
| PREN 3139 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, INCH BASED SERIES |
| PREN 3278 : 200P1 | AEROSPACE SERIES - SLEEVES, TUBULAR, PROTRUDING HEAD, IN CORROSION RESISTING STEEL, PASSIVATED (O,25 MM WALL THICKNESS) |
| PREN 3776 : 200P1 | AEROSPACE SERIES - PINS, QUICK RELEASE, TWO BALLS, SINGLE ACTING, SINGLE LOCKING, "L" TYPE HANDLE, IN CORROSION RESISTING STEEL |
| PREN 3744 : 200P1 | AEROSPACE SERIES - STRAIGHT PINS, SPRING TYPE, LIGHT DUTY, IN CORROSION RESISTING SPRING STEEL, PASSIVATED |
| PREN 3742 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 4297 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY PLASTIC RING, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 4304 : 200P1 | AEROSPACE SERIES - SLEEVES, TUBULAR, FOR SHEAR SCREWS WITH FLUSH HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, (0,25 MM WALL THICKNESS) |
| PREN 4219 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY DOMED PLASTIC CAP, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 4710-05 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 05: SPRING CLAMP - TWO WAYS TOLERANCE COMPENSATION |
| PREN 4076 : 200P1 | AEROSPACE SERIES - SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 3743 : 200P1 | AEROSPACE SERIES - STRAIGHT PINS, SPRING TYPE, HEAVY DUTY, IN CORROSION RESISTING SPRING STEEL, PASSIVATED |
| PREN 4634 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 6105:2016 | AEROSPACE SERIES - STUD WITH SHOULDER |
| I.S. EN 6090:2016 | AEROSPACE SERIES - WASHER, RETAINING |
| I.S. EN 3017:2008 | AEROSPACE SERIES - WASHERS, FACING/PACKING - HEAT RESISTING STEEL |
| I.S. EN 2879:2017 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, AIR RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN CORROSION RESISTING STEEL, PASSIVATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 3034:2009 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER - IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| DIN EN 3038:1996-11 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| DIN EN 3136:1996-04 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES |
| DIN EN 2874:1996-09 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS EN 2949:1997 | Washers, wire locking, in corrosion resisting steel, passivated |
| BS EN 4303:2005 | Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
| BS EN 3536:2006 | Aerospace series. Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS EN 4306:2005 | Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) |
| BS EN 2948:1997 | Washers, tab, in heat resisting steel, passivated |
| I.S. EN 2888:2006 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| I.S. EN 4168:2005 | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - OUTER CLIPS IN HEAT RESISTING STEEL FE-PA2601 (A286) |
| I.S. EN 4113:2009 | AEROSPACE SERIES - CLAMPS, LOOP ("P" TYPE) IN CORROSION RESISTING STEEL, PASSIVATED WITH RUBBER CUSHIONING - DIMENSIONS, MASSES |
| I.S. EN 4167:2005 | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - INNER CLIPS IN HEAT RESISTING STEEL FE-PA2601 (A286) |
| I.S. EN 2491:2011 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| BS EN 4805:2017 | Aerospace series. Flange couplings. Weld coupling, straight, in heat resisting steel. Inch series |
| I.S. EN 4802:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 3 FASTENING HOLES, IN NICKEL ALLOY - INCH SERIES |
| 06/30145490 DC : 0 | EN 4634 - AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601, PASSIVATED - CLASSIFICATION - 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 4808:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, 90 DEGREES ELBOW, IN NICKEL ALLOY - INCH SERIES |
| BS EN 4806:2017 | Aerospace series. Flange couplings. Weld coupling, straight, in nickel alloy. Inch series |
| I.S. EN 4075:2008 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 11/30247480 DC : DRAFT MAY 2011 | BS EN 4710-006 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING |
| BS EN 2869:2009 | Aerospace series. Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 650°C |
| 16/30352094 DC : DRAFT NOV 2016 | BS EN 2894 - AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED, MOS[2] LUBRICATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 17/30370706 DC : 0 | BS EN 3278 - AEROSPACE SERIES - SLEEVES, TUBULAR, PROTRUDING HEAD, IN CORROSION RESISTING STEEL (0,25 MM WALL THICKNESS) |
| BS EN 6090:2016 | Aerospace series. Washer, retaining |
| UNI EN 3843 : 2010 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| 11/30247472 DC : DRAFT MAY 2011 | BS EN 4710-003 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - SPRING CLAMP |
| BS EN 4813:2017 | Aerospace series. Flange couplings. Cap, in heat resisting steel. Inch series |
| BS EN 3017:2008 | Aerospace series. Washers, facing/packing. Heat resisting steel |
| BS EN 4804:2017 | Aerospace series. Flange couplings. Swivel flange with 4 fastening holes, in nickel alloy. Inch series |
| BS EN 4075:2008 | Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated. Classification: 490 MPa (at ambient temperature) / 425 °C |
| DIN EN 2922:1997-02 (Draft) | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED, LEFT HAND THREAD - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 2883 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4808 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, 90 DEGREES ELBOW, IN NICKEL ALLOY - INCH SERIES |
| PREN 4710-06 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 06: STUD - QUICK-RELEASE AND LOCKING |
| PREN 4307 : 200P1 | AEROSPACE SERIES - SLEEVES, TUBULAR, FOR SHEAR SCREWS WITH FLUSH HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, (0,50 MM WALL THICKNESS) |
| PREN 4635 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 3431 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 3421 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, METRIC SERIES |
| PREN 3444 : 200P1 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 3714 : 200P2 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 3414 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, METRIC SERIES |
| I.S. EN 4710-04:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP - ONE WAY TOLERANCE COMPENSATION |
| I.S. EN 4806:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, STRAIGHT, IN NICKEL ALLOY - INCH SERIES |
| I.S. EN 4634:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| I.S. EN 6092:2016 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| I.S. EN 4710-03:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 03: SPRING CLAMP |
| UNI EN 2852 : 2011 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| BS EN 4168:2004 | Aerospace series. Clips, spring tension, three parts. Outer clips in heat resisting steel FE-PA2601 (A286) |
| BS EN 4167:2004 | Aerospace series. Clips, spring tension, three parts. Inner clips in heat resisting steel FE-PA2601 (A286) |
| BS EN 3431:2007 | Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 4498:2005 | Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| I.S. EN 4234:2015 | AEROSPACE SERIES - CLAMPS, WORM DRIVE - DIMENSIONS, MASSES |
| EN 4234:2015 | Aerospace series - Clamps, worm drive - Dimensions, masses |
| EN 4806:2017 | Aerospace series - Flange couplings - Weld coupling, straight, in nickel alloy - Inch series |
| EN 2869:2009 | Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 650 °C |
| UNI EN 2491 : 2012 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| EN 4801:2017 | Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in heat resisting steel - Inch series |
| EN 4805:2017 | Aerospace series - Flange couplings - Weld coupling, straight, in heat resisting steel - Inch series |
| EN 2546:2006 | Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions |
| BS ISO 22438:2018 | Aerospace series. Pipe coupling 8°30. in titanium alloy. Thrust wires |
| I.S. EN 3016:2008 | AEROSPACE SERIES - WASHERS COUNTERSUNK, LOAD SPREADING - HEAT RESISTING STEEL |
| BS EN 4710-06:2015 | Aerospace series. Quick release fastening systems for non-structural applications Stud. Quick-release and locking |
| 14/30296592 DC : 0 | BS EN 4474 - AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS - COATING METHODS |
| BS EN 4634:2009 | Aerospace series. Screws, 100° countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated. Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 3843:2010 | Aerospace series. Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/650°C |
| 09/30212012 DC : 0 | BS EN 2894 - AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED, MOS2 LUBRICATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| 11/30247474 DC : DRAFT MAY 2011 | BS EN 4710-004 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - SPRING CLAMP - ONE WAY MOVABLE |
| BS EN 4635:2009 | Aerospace series. Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1270 MPa (at ambient temperature) / 650 °C |
| 04/30033330 DC : DRAFT JUL 2004 | EN 4234 - AEROSPACE SERIES - CLAMPS - WORM DRIVE - DIMENSION AND MASS |
| 07/30165635 DC : 0 | BS EN 4635 - AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 4474:2009 | Aerospace series. Aluminium pigmented coatings. Coating methods |
| BS EN 6094:2016 | Aerospace series. Washer, spring, countersunk |
| BS EN 4808:2017 | Aerospace series. Flange couplings. Weld coupling, 90° elbow, in nickel alloy. Inch series |
| 11/30247479 DC : DRAFT MAY 2011 | BS EN 4710-005 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - SPRING CLAMP - TWO WAYS MOVABLE |
| NF EN 3034 : 2009 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| XP PREN 4168 : 1995 XP | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - OUTER CLIPS IN HEAT RESISTING STEEL FE-PA92HT (A286) |
| NF EN 2883 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 3016 : 2008 | AEROSPACE SERIES - WASHERS COUNTERSUNK, LOAD SPREADING - HEAT RESISTING STEEL |
| PREN 4802 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 3 FASTENING HOLES, IN NICKEL ALLOY - INCH SERIES |
| I.S. EN 4813:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - CAP, IN HEAT RESISTING STEEL - INCH SERIES |
| PREN 3415 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, METRIC SERIES |
| PREN 3420 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, METRIC SERIES |
| PREN 3767 : 200P1 | AEROSPACE SERIES - RIVETS, BLIND, NUT PLATE, 100 DEGREES COUNTERSUNK HEAD, IN HEAT RESISTING STEEL, PASSIVATED, METRIC SERIES |
| PREN 3843 : 200P2 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| NF EN 3033 : 2008 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA2601 (A286), UNCOATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| I.S. EN 4474:2016 | AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS - COATING METHODS |
| NF EN 3843 : 2011 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| EN 4710-03:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 03: Spring clamp |
| I.S. EN 4801:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 3 FASTENING HOLES, IN HEAT RESISTING STEEL - INCH SERIES |
| BS EN 3278:2012 | Aerospace series. Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness) |
| I.S. EN 3033:2008 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA2601 (A286), UNCOATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| BS EN 3138:2001 | Aerospace series. Rivets, solid 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| BS EN 2998:1996 | Washers, flat, in heat resisting steel, passivated |
| BS EN 3136:1996 | Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series |
| BS EN 3759:1997 | Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 4590:2005 | Aerospace series. Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated |
| BS EN 4069:1996 | Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated. Classification: 600MPa (at ambient temperature)/650°C |
| BS EN 2546:2006 | Aerospace series. Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods. Dimensions |
| BS EN 2491:2011 | Aerospace series. Molybdenum disulphide dry lubricants. Coating methods |
| BS EN 4304:2005 | Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
| BS EN 3696:2001 | Aerospace series. Washers in heat resisting steel |
| BS EN 2887:1995 | Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature)/425°C |
| BS EN 2881:2006 | Aerospace series. Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<sub>2</sub> lubricated. Classification: 900 MPa (at ambient temperature) / 120°C |
| BS EN 4032:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Thrust wire |
| BS EN 3038:1997 | Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 3135:1996 | Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series |
| BS EN 2810:2001 | Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated. Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 3760:1997 | Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 2653:1997 | Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) /425°C |
| BS EN 4307:2005 | Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) |
| EN 2887:1995 | Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) / 425 °C |
| EN 4075:2008 | Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 °C |
| EN 2653:1996 | Aerospace series - Screws, 100° countersunk normal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
| EN 4710-04:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 04: Spring clamp - One way tolerance compensation |
| EN 3278:2012 | Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness) |
| EN 3908:2017 | Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
| EN 4810:2017 | Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes - Inch series |
| EN 3843:2010 | Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 650 °C |
| EN 4498:2005 | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| EN 4710-05:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 05: Spring clamp - Two ways tolerance compensation |
| EN 3759:1996 | Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C |
| EN 4303:2005 | Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
| EN 3038:1996 | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C |
| EN 4634:2009 | Aerospace series - Screws, 100° countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated - Classification: 900 MPa (at ambient temperature) / 650 °C |
| EN 6094:2016 | Aerospace series - Washer, spring, countersunk |
| EN 3431:2007 | Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 3033:2008 | Aerospace series - Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated - Classification : 1 100 MPa/425 °C |
| EN 4803:2017 | Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, in heat resisting steel - Inch series |
| EN 6092:2016 | Aerospace series - Receptacle, floating, double lug |
| EN 3138:2001 | Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| EN 3696:2001 | Aerospace series - Washers in heat resisting steel |
| EN 4306:2005 | Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) |
| EN 2650:1996 | Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
| EN 3543:1997 | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425°C |
| EN 2359:1988 | Aerospace series - Fork-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads |
| EN 4590:2005 | Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated |
| EN 2569:1991 | Aerospace series - Control cable fittings and turnbarrels - Technical specification |
| EN 2879:2017 | Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C |
| EN 4297:2017 | Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 120 °C |
| EN 2949:1996 | Aerospace series - Washers, wire locking, in corrosion resisting steel, passivated |
| EN 3016:2008 | Aerospace series - Washers countersunk, load spreading - Heat resisting steel |
| EN 3769:1997 | Aerospace series - Electrolytic polishing of corrosion resisting steels and heat resisting alloys |
| EN 2881:2006 | Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated, metric series - Classification: 900 MPa (at ambient temperature) / 120 °C |
| EN 4813:2017 | Aerospace series - Flange couplings - Cap, in heat resisting steel - Inch series |
| EN 4804:2017 | Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, in nickel alloy - Inch series |
| EN 3017:2008 | Aerospace series - Washers, facing/packing - Heat resisting steel |
| EN 3444:2006 | Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1 250 MPa (at ambient temperature) /650 C |
| EN 3052:2009 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 3760:1996 | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C |
| EN 4808:2017 | Aerospace series - Flange couplings - Weld coupling, 90° elbow, in nickel alloy - Inch series |
| EN 4307:2005 | Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) |
| EN 4807:2017 | Aerospace series - Flange couplings - Weld coupling, 90° elbow, in heat resisting steel - Inch series |
| EN 4710-06:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 06: Stud - quick-release and locking |
| EN 2491:2011 | Aerospace series - Molybdenum disulphide dry lubricants - Coating methods |
| EN 3536:2006 | Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 2852:2010 | Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1 100 MPa/650 °C |
| EN 6090:2016 | Aerospace series - Washer, retaining |
| EN 4167:2004 | Aerospace series - Clips, spring tension, three parts - Inner clips in heat resisting steel FE-PA2601 (A286) |
| EN 3139:2001 | Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series |
| EN 4168:2004 | Aerospace series - Clips, spring tension, three parts - Outer clips in heat resisting steel FE-PA2601 (A286) |
| EN 2888:2006 | Aerospace series - Metric Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
| EN 4635:2009 | Aerospace series - Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 270 MPa (at ambient temperature) / 650 °C |
| EN 4069:1996 | Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650°C |
| EN 4113:2009 | Aerospace series - Clamps, loop ('P' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses |
| EN 4304:2005 | Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
| EN 2883:2009 | Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 3140:2001 | Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| EN 2810:2001 | Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 650 °C |
| EN 4802:2017 | Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in nickel alloy - Inch series |
| EN 2948:1996 | Aerospace series - Washers, tab, in heat resisting steel, passivated |
| EN 6105:2016 | Aerospace series - Stud with shoulder |
| EN 4812:2017 | Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes - Inch series |
| BS EN 3034:2009 | Aerospace series. Nuts, self-locking, hexagonal with captive washer. In heat resisting steel FE-PA92HT (A286), silver coated. Classification: 1100 MPa/425 °C |
| BS EN 4801:2017 | Aerospace series. Flange couplings. Swivel flange with 3 fastening holes, in heat resisting steel. Inch series |
| BS EN 2852:2010 | Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated. Classification: 1100 MPa/650°C |
| BS EN 2879:2017 | Aerospace series. Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature) / 235 °C |
| BS EN 3908:2017 | Aerospace series. Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
| BS EN 4710-05:2015 | Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. Two ways tolerance compensation |
| BS EN 2883:2009 | Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| 17/30362517 DC : DRAFT JUNE 2017 | BS EN 4234 - AEROSPACE SERIES - CLAMPS, WORM DRIVE - DIMENSIONS, MASSES |
| DIN EN 3764:1997-09 (Draft) | AEROSPACE SERIES - WASHERS, CONCAVE, IN HEAT RESISTING STEEL, PASSIVATED |
| DIN EN 3821:1996-06 (Draft) | AEROSPACE SERIES - WASHERS, CHAMFERED, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED |
| 07/30165634 DC : 0 | BS EN 4634 - AEROSPACE SERIES - SCREW, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN STEEL FE-PA2601, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE 650 DEGREES C) |
| 98/700441 DC : DRAFT JAN 1998 | PREN 3259 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES IN ANODIZED ALUMINIUM ALLOY - THRUST WIRE |
| NF EN 2869 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 6091 : 200P1 | AEROSPACE SERIES - CIRCLIP |
| PREN 2810 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 3052 : 1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4813 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - CAP, IN HEAT RESISTING STEEL - INCH SERIES |
| DIN EN 3822:1999-11 (Draft) | AEROSPACE SERIES - WASHERS, FLAT, THICK, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 2879 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, AIR RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN CORROSION RESISTING STEEL, PASSIVATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3137 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED |
| PREN 2852 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| PREN 2869 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 2491 : 200P1 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| PREN 2834 : 200P1 | AEROSPACE SERIES - SAFETY PINS |
| PREN 2895 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 2888 : 1 | AEROSPACE SERIES - BOLTS, HEXAGONAL NORMAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4807 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, 90 DEGREES ELBOW, IN HEAT RESISTING STEEL - INCH SERIES |
| PREN 3769 : 1996 | AEROSPACE SERIES - ELECTROLYTIC POLISHING OF CORROSION RESISTANT STEELS AND HEAT RESISTING ALLOYS |
| PREN 4075 : 200P1 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 3822 : 200P2 | AEROSPACE SERIES - WASHERS, FLAT, THICK, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 4032 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - THRUST WIRE |
| PREN 4082 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 4810:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL ON HEAT RESISTING STEEL PLATE WITH 3 FASTENING HOLES - INCH SERIES |
| I.S. EN 4812:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL ON HEAT RESISTING STEEL PLATE WITH 4 FASTENING HOLES - INCH SERIES |
| NF EN 3017 : 2008 | AEROSPACE SERIES - WASHERS, FACING/PACKING - HEAT RESISTING STEEL |
| EN 4474:2016 | Aerospace series - Aluminium pigmented coatings - Coating methods |
| UNI EN 3278 : 2012 | AEROSPACE SERIES - SLEEVES, TUBULAR, PROTRUDING HEAD, IN CORROSION RESISTING STEEL, PASSIVATED (0,25 MM WALL THICKNESS) |
| DIN EN 3759:1996-11 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| DIN EN 3543:1997-03 | AEROSPACE SERIES SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| BS EN 2914:1996 | Washers, flat, large diameter, in heat resisting steel, passivated |
| BS EN 3543:1997 | Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 2363:1989 | Specification for locking clips for turnbuckles of control cables. Dimensions |
| BS EN 3140:2001 | Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| BS EN 4234:2015 | Aerospace series. Clamps, worm drive. Dimensions, masses |
| BS EN 2359:1989 | Specification for fork-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads |
| BS EN 2874:1996 | Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1550 MPa (at ambient temperature) /315°C |
| PREN 6105 : 200P1 | AEROSPACE SERIES - STUD WITH SHOULDER |
| EN 2032-1:2001 | Aerospace series - Metallic materials - Part 1: Conventional designation |
| EN 2000:1991 | Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.