EN 2078:2001
Current
Current
The latest, up-to-date edition.
Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval
Published date
12-05-2001
Publisher
Sorry this product is not available in your region.
Foreword
0 Introduction
1 Scope
2 Normative references
3 Definitions
4 Manufacturing schedule
5 Inspection schedule
6 Inspection and test report
This standard defines the manufacturing schedule, inspection schedule and inspection and test report for EN aerospace metallic semi-finished products. It also specifies the general principles, preparation and approval of these documents.It shall be used with the relevant semi-finished product definition documents (level 3) defined in EN 4258.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 2078. (06/2003) Supersedes UNE EN 2078. (05/2005)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 2078:2002 | Identical |
| NBN EN 2103-3 : 1992 | Identical |
| NBN EN 2103-1 : 1992 | Identical |
| NS EN 2078 : 2ED 2002 | Identical |
| DIN EN 2078:2003-06 | Identical |
| NBN EN 2858-1 : 1994 | Identical |
| NEN EN 2078 : 2002 | Identical |
| NBN EN 2858-3 : 1994 | Identical |
| NBN EN 2157-3 : 1993 | Identical |
| NBN EN 2082-1 : 1992 AMD 1 1995 | Identical |
| PN EN 2078 : 2004 | Identical |
| I.S. EN 2078:2002 | Identical |
| NF EN 2078 : 2002 | Identical |
| NBN EN 2078 : 2002 | Identical |
| NBN EN 2157-1 : 1993 | Identical |
| UNE-EN 2078:2001 | Identical |
| UNE-EN 2078:1996 | Identical |
| I.S. EN 4700-007:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
| 00/705877 DC : 0 | PREN 4400-3 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| BS EN 4050-1:2012 | Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings General requirements |
| BS EN 3875:2017 | Aerospace series. Metallic materials, Filler metal for brazing. Technical specification |
| 10/30228108 DC : 0 | BS EN 4400-9 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 9: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| XP PREN 3641 : 1994 XP | AEROSPACE SERIES - TEST METHODS - HEAT RESISTING ALLOYS COMPACTED MATERIAL - PROCEDURE FOR QUANTITATIVE DETERMINATION OF THERMALLY INDUCED POROSITY (T.I.P.) |
| 01/710777 DC : 0 | PREN 3875 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| 01/713948 DC : 0 | PREN 4400-6 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: FORGING STOCK |
| 96/716567 DC : 0 | PREN 4400-1 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS |
| BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
| XP PREN 4258 : 1996 XP | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE |
| PREN 4400-6 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 6: ALUMINIUM ALLOY FORGING STOCK |
| PREN 4700-004 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 4: WIRE |
| PREN 4700-005 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| PREN 4800-006 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 4800-005 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| PREN 4700-003 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| PREN 3640 : 200P1 | AEROSPACE SERIES - TEST METHODS - HEAT RESISTING ALLOYS ATOMIZED POWDER - PROCEDURE FOR THE INSPECTION OF LOOSE POWDER CLEANNESS BY WATER ELUTRIATION |
| PREN 4700-006 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 3718 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF TUBES |
| PREN 4800-003 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 3: TUBE |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| PREN 3879 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION |
| PREN 3877 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - DETERMINATION OF SOLIDUS AND LIQUIDUS TEMPERATURES BY DIFFERENTIAL THERMAL ANALYSIS OF BRAZE ALLOYS |
| NF EN 4700-007 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| I.S. EN 3718:2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF TUBES |
| DIN EN 2858-3:1994-06 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - FORGING STOCK AND FORGINGS - TECHNICAL SPECIFICATION - PART 3: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| BS EN 2103-3:1992 | Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification Pre-production and production castings |
| BS EN 2157-1:1993 | Steel. Forging stock and forgings. Technical specifications General requirements |
| 01/710778 DC : 0 | PREN 3879 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION |
| BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
| XP PREN 4261 : 1998 XP | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TEST METHOD STANDARDS |
| 92/77415 DC : 0 | PREN 2069-1 - AEROSPACE SERIES - STEEL WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS |
| EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
| BS EN 4700-003:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
| 03/306584 DC : 0 | EN 4400-5 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 5: ALUMINIUM AND ALUMINIUM ALLOY RIVET WIRE |
| 95/715392 DC : 0 | PREN 4261-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TEST METHOD STANDARDS - PART 1: GENERAL REQUIREMENTS |
| NF EN 2950 : 2008 | AEROSPACE SERIES - TEST METHOD - WROUGHT HEAT RESISTING ALLOYS SEMI-FINISHED PRODUCTS AND PARTS - CONDITIONS FOR MACROGRAPHIC AND MICROGRAPHIC EXAMINATION - ATLAS OF STRUCTURES AND DEFECTS |
| NF EN 4700-005 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| 01/716043 DC : 0 | PREN 4800-5 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| NF EN 4800-003 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| PREN 2950 : 200P1 | AEROSPACE SERIES - TEST METHOD - WROUGHT HEAT RESISTING ALLOYS - SEMI-FINISHED PRODUCTS AND PARTS - CONDITIONS FOR MACROGRAPHIC AND MICROGRAPHIC EXAMINATION - ATLAS OF STRUCTURES AND DEFECTS |
| PREN 6070 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - GENERAL REQUIREMENTS |
| PREN 3225-1 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOYS PRODUCED FROM ATOMIZED POWDER - POWDER COMPACTED FORGING STOCK AND PARTS - TECHNICAL SPECIFICATION - PART 1 - GENERAL REQUIREMENTS |
| I.S. EN 4800-002:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| NF EN 4800-006 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| NF EN 4800-002 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| NF EN 4700-002 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| EN 3875:2017 | Aerospace series - Metallic materials, Filler metal for brazing - Technical specification |
| DIN EN 2103-3:1991-11 | AEROSPACE SERIES - STEEL, NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS - TECHNICAL SPECIFICATION - PART 3: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
| NF EN 4800-005 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
| BS EN 4800-006:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings |
| I.S. EN 4800-005:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| 02/708860 DC : 0 | PREN 4800-1 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP |
| BS EN 4800-005:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Forging stock |
| NF EN 4700-006 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 3875 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| PREN 4260 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS |
| PREN 3641 : 200P1 | AEROSPACE SERIES - TEST METHODS - HEAT RESISTING ALLOYS COMPACTED MATERIAL - PROCEDURE FOR QUANTITATIVE DETERMINATION OF THERMALLY INDUCED POROSITY (T.I.P.) |
| I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| NF EN 4700-003 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| I.S. EN 4800-004:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| BS EN 2103-1:1992 | Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. General requirements |
| NF EN 4800-008 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| NF EN 4800-007 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| BS EN 4800-008:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production castings |
| BS EN 2950:2008 | Aerospace series. Test method. Wrought heat resisting alloys Semifinished products and parts. Conditions for macrographic and micrographic examination. Atlas of structures and defects |
| BS EN 4800-001:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Plate, sheet and strip |
| 05/30129551 DC : 0 | PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| 11/30253929 DC : 0 | BS EN 4820 - AEROSPACE SERIES - COPPER AND COPPER ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION |
| BS EN 4800-004:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Wire |
| BS EN 4800-002:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Bar and section |
| 03/306585 DC : 0 | EN 4400-7 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 7: ALUMINIUM ALLOY FORGINGS |
| BS EN 4800-003:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Tube |
| 01/716044 DC : 0 | EN 4800-6 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| NF EN 4700-001 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| NF EN 4700-004 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| NF EN 4800-004 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| 05/30129555 DC : 0 | PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 2500/1 : 200P4 | AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 1: GENERAL REQUIREMENTS |
| PREN 4800-008 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| PREN 4800-002 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 2: BAR AND SECTION |
| I.S. EN 4050-1:2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS |
| NF EN 4800-001 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN 4800-008:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| I.S. EN 3875:2017 | AEROSPACE SERIES - METALLIC MATERIALS, FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| DIN EN 2103-1:1991-11 | AEROSPACE SERIES - STEEL, NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS - TECHNICAL SPECIFICATION - PART 1 - GENERAL REQUIREMENTS |
| BS EN 2157-3:1993 | Steel. Forging stock and forgings. Technical specifications Pre-production and production forgings |
| BS EN 4258:1998 | Metallic materials. General organization of standardization. Links between types of EN standards and their use |
| BS EN 2545-1:1995 | Titanium and titanium alloy remelting stock and castings. Technical specification General requirements |
| EN 4800-003:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube |
| EN 4800-002:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section |
| EN 4800-001:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip |
| EN 2950:2008 | Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects |
| EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 4700-003:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
| EN 2858-1:1994 | Aerospace series - Titanium and titanium alloys - Forging stock and forgings - Technical specification - Part 1: General requirements |
| EN 2545-3:1995 | Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 3: Pre-production and production castings |
| EN 2858-3:1994 | Aerospace series - Titanium and titanium alloys - Forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings |
| EN 4700-007:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
| EN 4050-1:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements |
| EN 3718:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes |
| EN 2157-3:1993 | Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings |
| EN 4800-004:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire |
| EN 2545-1:1995 | Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 1: General requirements |
| EN 4800-008:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings |
| EN 4800-007:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock |
| EN 4800-005:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock |
| EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
| EN 4800-006:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings |
| EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
| EN 2157-1:1993 | Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 1: General requirements |
| 01/716045 DC : 0 | PREN 4800-7 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: RE-MELTING STOCK |
| 05/30129558 DC : 0 | PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
| BS EN 3718:2012 | Aerospace series. Test method for metallic materials. Ultrasonic inspection of tubes |
| I.S. EN 4700-003:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| I.S. EN 4800-006:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| BS EN 4700-007:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
| I.S. EN 4800-003:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| BS EN 4800-007:2010 | Aerospace series. Titanium and titanium alloys Remelting stock |
| I.S. EN 4800-007:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| 01/716046 DC : 0 | PREN 4800-8 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| I.S. EN 2950:2008 | AEROSPACE SERIES - TEST METHOD - WROUGHT HEAT RESISTING ALLOYS SEMI-FINISHED PRODUCTS AND PARTS - CONDITIONS FOR MACROGRAPHIC AND MICROGRAPHIC EXAMINATION - ATLAS OF STRUCTURES AND DEFECTS |
| PREN 4800-001 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP |
| I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| PREN 4400-1 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: PLATE |
| PREN 4800-007 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
| PREN 4261 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TEST METHOD STANDARDS |
| PREN 4050-1 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION BARS, PLATES, FORGING STOCK AND FORGINGS - GENERAL INFORMATION |
| PREN 4700-007 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| PREN 4800-004 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 4: WIRE |
| PREN 4700-001 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| S.R. CWA 16762:2014 | CEN WORKSHOP AGREEMENT - CEN/WS SERES - ICT STANDARDS IN SUPPORT OF AN EREPORTING FRAMEWORK FOR THE ENGINEERING MATERIALS SECTOR |
| I.S. EN 4800-001:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| XP PREN 4260 : 1998 XP | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS |
| DIN EN 2858-1:1994-06 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - FORGING STOCK AND FORGINGS - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 3718:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes |
| I.S. EN 4258:1998 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE |
| EN 3042 : 1991 | AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - QUALIFICATION PROCEDURE |
| EN 2000:1991 | Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.