EN 2000:1991
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers
Superseded date
03-16-2022
Superseded by
Published date
12-31-1991
Publisher
Sorry this product is not available in your region.
Foreword
0 Introduction
1 Scope and field of application
2 References
3 Definitions
4 Requirements
5 Procedures
6 List of approved manufacturers
This standard prescribes the requirements and the procedure for approving the quality system implemented by the manufacturer, for manufacturing EN aerospace products. It also provides instructions for verifying that this approved system is maintained. It is applicable whenever referenced.
| Committee |
ASD-STAN
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NEN EN 2000 : 1992 | Identical |
| NBN EN 2311 : 2012 | Identical |
| NBN EN 2897 : 1996 | Identical |
| NBN EN 2912 : 1996 | Identical |
| NBN EN 2884 : 1996 | Identical |
| NBN EN 2885 : 1996 | Identical |
| NBN EN 2886 : 1996 | Identical |
| NBN EN 2948 : 1996 | Identical |
| SNV DIN EN 2000 : 1992 | Identical |
| NBN EN 2076-1 : 1992 AMD 1 1995 | Identical |
| NBN EN 2858-1 : 1994 | Identical |
| NBN EN 2870 : 1996 COR 1996 | Identical |
| NBN EN 2752 : 1993 | Identical |
| NBN EN 2753 : 1996 | Identical |
| UNE-EN 2000:1993 | Identical |
| NBN EN 2874 : 1996 COR 1996 | Identical |
| PN EN 2000 : 1996 | Identical |
| NS EN 2000 : 1ED 1992 | Identical |
| DIN EN 2000:1992-02 | Identical |
| UNI EN 2000 : 1992 | Identical |
| BS EN 2000:1992 | Identical |
| NBN EN 2808 : 1997 | Identical |
| NF EN 2000 : 1992 | Identical |
| I.S. EN 2000:1992 | Identical |
| NBN EN 2914 : 1996 | Identical |
| NBN EN 2000 : 1992 | Identical |
| 00/705877 DC : 0 | PREN 4400-3 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| BS EN 4050-1:2012 | Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings General requirements |
| 01/716045 DC : 0 | PREN 4800-7 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: RE-MELTING STOCK |
| 05/30129558 DC : 0 | PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
| 01/710777 DC : 0 | PREN 3875 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| 05/30129551 DC : 0 | PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| 92/75739 DC : DRAFT APR 1992 | PREN 3765 - AEROSPACE SERIES - ELECTROLYTIC SILVER PLATING FOR GENERAL USE - STEELS, HEAT RESISTING ALLOYS, COPPER AND COPPER ALLOYS |
| 01/713948 DC : 0 | PREN 4400-6 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: FORGING STOCK |
| 96/716567 DC : 0 | PREN 4400-1 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS |
| XP PREN 3856 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS FOR THRUST WIRE |
| XP PREN 3867 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGES IN TITANIUM ALLOY TI-P64001 |
| 93/709901 DC : DRAFT JUNE 1993 | PREN 2345 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY SOLID RIVETS, INCH BASED SERIES - TECHNICAL SPECIFICATION |
| 93/706720 DC : 0 | PREN 2535 - AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| PREN 2811 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED IN STEEL CADMIUM PLATED - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 2922 : 200P3 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED, LEFT HAND THREAD - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| 09/30205304 DC : 0 | BS EN 3280 - AEROSPACE SERIES - BEARINGS, AIRFRAME ROLLING, RIGID OR SELF-ALIGNING - TECHNICAL SPECIFICATION |
| PREN 2264 : 1995 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES C |
| PREN 2327 : 200P1 | AEROSPACE SERIES - WASHERS, LOCK, WITH RADIAL SERRATIONS IN ALLOY STEEL, CADMIUM PLATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| PREN 2867 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, ONE LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1 110 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3140 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES |
| 00/717056 DC : DRAFT NOV 2000 | PREN 4199-006 - AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT, ROUND BRAID COPPER CONDUCTORS FOR BONDING STRAPS, TIN PLATED, UP TO +150 DEGREE C, NICKEL PLATED, UP TO +260 DEGREE C - PRODUCT STANDARD |
| PREN 3700 : DRAFT 93 CORR 1993 | AEROSPACE SERIES - STATIC INVERTERS FOR AIRCRAFT - TECHNICAL SPECIFICATION |
| PREN 4501 : 200P1 | AEROSPACE SERIES - BOLTS, SHOULDERED, THIN HEXAGONAL HEAD, CLOSE TOLERANCE SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4400-6 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 6: ALUMINIUM ALLOY FORGING STOCK |
| PREN 4311 : 200P1 | AEROSPACE SERIES - STUDS, COURSE TOLERANCE REDUCED SHANK, MEDIUM LENGTH THREADS, IN HEAT AND CORROSION RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 2642 : 200P1 | AEROSPACE SERIES - STRUCTURAL ADHESIVE SYSTEMS - ADHESIVE FILM - TECHNICAL SPECIFICATION |
| PREN 2876 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN ALUMINIUM ALLOY, ANODIZED - CLASSIFICATION: 450 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 2809 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 3228 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2680 : 200P3 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, TWO LUG, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2343 : 2 | AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST AND MULTI-AXIALLY ORIENTATED ACRYLIC SHEETS FOR AIRCRAFT GLAZING - TECHNICAL SPECIFICATION |
| PREN 2646 : 200P3 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN STEEL, CADMIUM PLATED |
| PREN 2719 : 200P1 | AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION |
| PREN 3539 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 2856 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, CLOSED CORNER, REDUCED SERIES, WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 3138 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID 100 DEGREES COUNTERSUNK NORMAL HEAD WITH DOME, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES |
| PREN 2334 : 1995 | CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS |
| PREN 2754 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING TWO LUG, FLOATING WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 2881 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FUEL RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN CORROSION RESISTING STEEL, PASSIVATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 2913 : 1997 | AEROSPACE SERIES - WASHERS, FLAT, LARGE DIAMETER IN ALLOY STEEL, CADMIUM PLATED |
| PREN 2647 : 1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES C |
| PREN 2546 : 200P1 | AEROSPACE SERIES - WASHERS, LOCK WITH RADIAL SERRATIONS IN CORROSION RESISTING STEEL PASSIVATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| PREN 4130 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4139 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4249 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4243 : 200P1 | AEROSPACE SERIES - CAST ACRYLIC SHEETS - TECHNICAL SPECIFICATION |
| PREN 4416 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - WIDE WOVEN FABRICS - TECHNICAL SPECIFICATION |
| PREN 4497 : 200P1 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4400-4 : DRAFT 2003 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 4309 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY PLASTIC RING, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 4498 : 200P1 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4590 : 200P1 | AEROSPACE SERIES - RETAINERS, SPRING, SHEET METAL, FOR SELF-LOCKING BARREL NUTS, IN CORROSION RESISTING STEEL, PASSIVATED |
| PREN 3824 : 200P1 | AEROSPACE SERIES - CLINCH-NUTS, BLIND, SELF-LOCKING, WITH COUNTERBORE, IN CORROSION RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4077 : 200P2 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 4112 : 200P2 | PINS, PARALLEL, IN CORROSION RESISTING STEEL, PASSIVATED |
| PREN 4135 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 4153 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2219, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 3902 : 200P1 | AEROSPACE SERIES - WASHERS FOR RIVET ASSEMBLIES, IN ALUMINIUM ALLOY, ANODIZED, METRIC SERIES |
| PREN 4201 : 200P2 | AEROSPACE SERIES - WASHERS, 100 DEGREES DIMPLED, IN TITANIUM |
| PREN 3792 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TECHNICAL SPECIFICATION |
| PREN 3851 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS, STRAIGHT |
| TR 3040-1 : 5 | AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - PART 1 - LIST OF APPROVED MANUFACTURERS |
| PREN 3858 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - THRUST WIRES IN STEEL FE-PA13 |
| PREN 3536 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 3538 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 3626 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3904 : 200P1 | AEROSPACE SERIES - WASHERS, WIRE LOCKING, IN ALUMINIUM ALLOY, ANODIZED |
| PREN 3685 : 200P1 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION |
| PREN 3727 : 200P2 | AEROSPACE SERIES - BEARINGS, AIRFRAME ROLLING, RIGID, WITH FLANGED ALIGNMENT HOUSING - DIMENSIONS AND LOADS |
| PREN 3757 : 200P2 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING FLOATING, SELF-ALIGNING TWO LUG, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED-CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3763 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3765 : 200P1 | AEROSPACE SERIES - ELECTROLYTIC SILVER PLATING FOR GENERAL USE - STEELS, HEAT RESISTING ALLOYS, COPPER AND COPPER ALLOYS |
| PREN 3821 : 200P2 | AEROSPACE SERIES - WASHERS, CHAMFERED, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| PREN 3835 : 200P1 | AEROSPACE SERIES - WASHERS, 100 DEGREES DIMPLED, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 3834 : 200P2 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN CORROSION RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3852 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, WELDED, THREADED |
| PREN 3856 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS FOR THRUST WIRE |
| PREN 3879 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION |
| PREN 4407 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 3908 : 200P2 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
| PREN 4496 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4084 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4591 : 200P1 | AEROSPACE SERIES - NUTS, BARREL, SELF-LOCKING, FLOATING, SELF-ALIGNING, IN HEAT RESISTING NICKEL BASE ALLOY, MOS[2] LUBRICATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3423 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE COUNTERSUNK NORMAL HEAD, IN TITANIUM TI-P02, ANODIZED, METRIC SERIES |
| PREN 4253 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, CLOSED CORNER, REDUCED SERIES WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4269 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4494 : 200P1 | AEROSPACE SERIES - RINGS, SPLIT, IN STEEL |
| PREN 4080 : 200P3 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4127 : 200P2 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| UNI EN 4050-1 : 2013 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS |
| NF EN 2516 : 1997 | AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTING STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| I.S. EN 2516:1997 | AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTING STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| I.S. EN 3740:1997 | AEROSPACE SERIES - BOLTS, SHOULDERED, THIN HEXAGONAL HEAD, CLOSE TOLERANCE SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED - CLASSIFICATION: 1,100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| EN 2516:1997 | Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys |
| DIN EN 3308:1996-09 | AEROSPACE SERIES - SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| DIN EN 2884:1996-03 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED, CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| DIN EN 2870:1996-09 | AEROSPACE SERIES - BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS(INDEX)2 LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| DIN EN 3760:1996-11 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| DIN EN 2885:1996-03 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED, CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| DIN EN 3381:1996-11 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| BS EN 2138:2000 | Washers, flat, in steel, cadmium plated |
| BS EN 2552:1993 | Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series |
| BS EN 2913:2000 | Washers, flat, large diameter, in steel, cadmium plated |
| BS EN 3852:2002 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Straight unions, welded, threaded |
| BS EN 2808:1997 | Anodizing of titanium and titanium alloys |
| BS EN 2649:1995 | Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C |
| BS EN 3267:2001 | Aerospace series. Washers, bulkhead in titanium alloy |
| BS EN 3139:2001 | Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series |
| BS EN 2555:1993 | Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series |
| BS EN 2157-1:1993 | Steel. Forging stock and forgings. Technical specifications General requirements |
| I.S. EN 2885:1996 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 2886:1998 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| NF EN 2885 : 1996 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 2886 : 1996 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 3751:1997-03 (Draft) | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, CLOSED CORNER, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| DIN EN 4080:1996-03 (Draft) | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 92/77415 DC : 0 | PREN 2069-1 - AEROSPACE SERIES - STEEL WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS |
| XP PREN 3660-001 : 1994 XP | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION |
| XP PREN 4166 : 1995 XP | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - PTFE BUSHES |
| PREN 2414 : 200P1 | AEROSPACE SERIES - WASHERS, CHAMFERED, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED |
| PREN 3144 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID 100 DEGREES COUNTERSUNK NORMAL HEAD, IN NICKEL BASE ALLOY NI-P11, INCH BASED SERIES |
| 01/716043 DC : 0 | PREN 4800-5 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| PREN 3303 : 1995 | BOLTS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPa (AT AMBIENT TEMPERATURE)/235 DEG C |
| PREN 4248 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4387 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS |
| PREN 3227 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| XP PREN 3851 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS, STRAIGHT |
| PREN 2535 : 200P1 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| PREN 3230 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2437 : DRAFT 98 CORR 99 | AEROSPACE SERIES - CHROMATE CONVERSION COATINGS (YELLOW) FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| PREN 2880 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FUEL RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 2516 : 1996 | PASSIVATION OF CORROSION RESISTANT STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| XP PREN 4167 : 1995 XP | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - INNER CLIPS IN HEAT RESISTING STEEL FE-PA92HT (A286) |
| PREN 3139 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, INCH BASED SERIES |
| PREN 3754 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3409 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM 1050A, METRIC SERIES |
| PREN 3744 : 200P1 | AEROSPACE SERIES - STRAIGHT PINS, SPRING TYPE, LIGHT DUTY, IN CORROSION RESISTING SPRING STEEL, PASSIVATED |
| PREN 3742 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 6070 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - GENERAL REQUIREMENTS |
| PREN 6084 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - SURFACING FILMS - TECHNICAL SPECIFICATION - GENERAL REQUIREMENTS |
| PREN 3225-1 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOYS PRODUCED FROM ATOMIZED POWDER - POWDER COMPACTED FORGING STOCK AND PARTS - TECHNICAL SPECIFICATION - PART 1 - GENERAL REQUIREMENTS |
| PREN 4297 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY PLASTIC RING, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 3750 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3768 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4254 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4255 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4219 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY DOMED PLASTIC CAP, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 4312 : 200P1 | AEROSPACE SERIES - STUDS, COARSE TOLERANCE REDUCED SHANK, MEDIUM LENGTH THREAD, IN HEAT AND CORROSION RESISTING STEEL, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4390 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, TWO LUG, IN HEAT RESISTING STEEL, SILVER PLATED, - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4425 : 200P1 | AEROSPACE SERIES - WASHERS, TAB IN CORROSION RESISTING STEEL FOR FLIGHT CONTROL RODS - DIMENSIONS |
| PREN 4435 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID 100 DEGREES COUNTERSUNK NORMAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2301 (HASTELLOY X), INCH BASED SERIES |
| PREN 4495 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4126 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, REDUCED SERIES, WITH INCREMENTAL COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 4076 : 200P1 | AEROSPACE SERIES - SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 3743 : 200P1 | AEROSPACE SERIES - STRAIGHT PINS, SPRING TYPE, HEAVY DUTY, IN CORROSION RESISTING SPRING STEEL, PASSIVATED |
| PREN 3753 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2043 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS) |
| PREN 4083 : 200P1 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, REDUCED HEIGHT, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| DIN EN 3136:1996-04 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES |
| DIN EN 2138:2000-02 | AEROSPACE SERIES - WASHERS, FLAT, IN STEEL, CADMIUM PLATED |
| DIN EN 2552:1993-03 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, INCH BASED SERIES |
| DIN EN 3038:1996-11 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| DIN EN 2122:1996-03 | AEROSPACE SERIES - WASHERS, FLAT, IN ALUMINIUM ALLOY, ANODIZED OR CHROMATED |
| DIN EN 2654:1996-10 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED THREADED TO HEAD, IN BRASS, TIN PLATED - CLASSIFICATION: 380 MPA (AT AMBIENT TEMPERATURE)/80 DEGREES C |
| DIN EN 2874:1996-09 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| DIN EN 2897:1996-09 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 2886:1996-09 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA/235 DEGREE C |
| BS EN 2553:1993 | Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series |
| BS EN 3855:2002 | Aerospace series. Pipe couplings, 60° spherical, in titanium alloy TI-P64001. Caps |
| BS EN 2082-1:1991 | Specification for aluminium alloy forging stock and forgings. Technical specification General requirements |
| BS EN 2139:1990 | Specification for washers, flat heat resisting steel |
| BS EN 2148:1993 | Rivets, solid, universal head, in aluminium alloy 5056A, inch based series |
| BS EN 2076-1:1991 | Aluminium and magnesium alloy ingots and castings. Technical specification General requirements |
| BS EN 3858:2002 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Thrust wires in steel FE-PA 13 |
| BS EN 3303:1997 | Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| DIN EN 3042:1992-02 | AEROSPACE SERIES - QUALITY ASSURANCE, EN AEROSPACE PRODUCTS - QUALIFICATION PROCEDURE |
| I.S. EN 2647:2006 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| 98/714591 DC : DRAFT SEP 1998 | PREN 4494 - AEROSPACE SERIES - SPLIT RING, IN STEEL |
| 99/701511 DC : DRAFT JAN 1999 | PREN 4106 - AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVE SYSTEMS - PASTE ADHESIVE - TECHNICAL SPECIFICATION |
| 03/306584 DC : 0 | EN 4400-5 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 5: ALUMINIUM AND ALUMINIUM ALLOY RIVET WIRE |
| DIN EN 3765:1997-09 (Draft) | AEROSPACE SERIES - ELECTROLYTIC SILVER PLATING FOR GENERAL USE - STEELS, HEAT RESISTING ALLOYS, COPPER AND COPPER ALLOYS |
| XP PREN 3853 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, THREADED |
| XP PREN 3852 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, WELDED, THREADED |
| 09/30207944 DC : 0 | BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| XP PREN 3868 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGE CONNECTORS, WELDED, IN TITANIUM ALLOY TI-P64001 |
| 96/712318 DC : DRAFT SEP 1996 | PREN 3079 - AEROSPACE SERIES - ADAPTORS WITH LOCKING RING UP TO 2800 KPA - TECHNICAL SPECIFICATION |
| PREN 3077 : 200P1 | AEROSPACE SERIES - CLAMPS WORM DRIVE - TECHNICAL SPECIFICATION |
| PREN 3875 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| DIN EN 2922:1997-02 (Draft) | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED, LEFT HAND THREAD - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 2863 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 2883 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| DIN EN 3434:1999-01 (Draft) | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, SELF-LOCKING, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4260 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS |
| PREN 4502 : 200P1 | AEROSPACE SERIES - WASHERS, FLAT, FOR RIVETING, IN HEAT RESISTING STEEL FE-PA4901 (MULTIMET), INCH BASED SERIES |
| PREN 2786 : 200P1 | AEROSPACE SERIES - ELECTROLYTIC SILVER PLATING OF FASTENERS |
| PREN 2868 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 2962 : 200P1 | AEROSPACE SERIES - CARBON FIBRE FILAMENT YARN (POLYACRYLONITRILE PRECURSOR) - TECHNICAL SPECIFICATION |
| PREN 3229 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3537 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 3431 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 3435 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 6047-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FOR HIGH CURRENT OPERATING TEMPERATURE +200 DEGREE C CONTINUOUS, AND FIRE RESISTANT - TECHNICAL SPECIFICATION |
| PREN 3421 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, METRIC SERIES |
| PREN 3653 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, ONE LUG, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2833-1 : 200P2 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS |
| PREN 3444 : 200P1 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 3410 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A, METRIC SERIES |
| PREN 3422 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN TITANIUM TI-P02, ANODIZED, METRIC SERIES |
| PREN 3714 : 200P2 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 3414 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, METRIC SERIES |
| PREN 4133 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4106 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVE SYSTEMS - PASTE ADHESIVE - TECHNICAL SPECIFICATION |
| PREN 4134 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| DIN EN 3037:1996-11 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| DIN EN 2651:1996-10 | AEROSPACE SERIES - SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED - CLASSIFICATION: 380 MPA (AT AMBIENT TEMPERATURE)/80 DEGREES C |
| DIN EN 3035:1996-11 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 2516:1997-05 | AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTANT STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| DIN EN 3135:1996-04 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, INCH BASED SERIES |
| DIN EN 2809:2001-12 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 3851:2003 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Swivel nuts, straight |
| BS EN 2437:2002 | Aerospace series. Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| BS EN 2334:1997 | Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| BS EN 2809:2001 | Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated. Classification. 900 MPa (at ambient temperature)/650°C |
| BS EN 2103-1:1992 | Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. General requirements |
| EN 2752:1989 | Aerospace series - Nuts, anchor, self locking fixed, two lug, reduced series, with counterbore - Classification : 1100 MPa/235 degree C |
| EN 3855:2002 | Aerospace series - Pipe couplings, 60°, spherical in titanium alloy TI-P64001 - Caps |
| EN 2914:1996 | Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated |
| EN 3303:1997 | Aerospace series - Screw, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235°C |
| 93/712335 DC : 0 | PREN 3846 - AEROSPACE SERIES - HONEYCOMB CORES, POLYAMIDE PAPER, PHENOLIC RESIN IMPREGNATED - TECHNICAL SPECIFICATION |
| DIN EN 2924:1997-02 (Draft) | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, SILVER PLATED, LEFT HAND THREAD - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| 02/708860 DC : 0 | PREN 4800-1 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP |
| 98/700450 DC : DRAFT JAN 1998 | PREN 4387 - AEROSPACE SERIES - NON-METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS |
| 01/716046 DC : 0 | PREN 4800-8 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| DIN EN 3771:1999-07 (Draft) | AEROSPACE SERIES - NUTS, BIHEXAGONAL, PLAIN, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| XP PREN 3855 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - CAPS |
| XP PREN 3857 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - ELBOWS 90 DEGREES, WELDED |
| 03/306585 DC : 0 | EN 4400-7 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 7: ALUMINIUM ALLOY FORGINGS |
| XP PREN 4168 : 1995 XP | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - OUTER CLIPS IN HEAT RESISTING STEEL FE-PA92HT (A286) |
| 00/702576 DC : 0 | PREN 4107 - AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVE SYSTEMS - FOAMING ADHESIVES - TECHNICAL SPECIFICATION |
| PREN 3143 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES |
| 01/716044 DC : 0 | EN 4800-6 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| DIN EN 3740:1996-11 | AEROSPACE SERIES - BOLTS, SHOULDERED, THIN HEXAGONAL HEAD, CLOSE TOLERANCE SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 2328 : 200P1 | AEROSPACE SERIES - WASHERS, TAB IN CORROSION RESISTING STEEL CADMIUM PLATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| PREN 2138 : 1997 | AEROSPACE SERIES - WASHERS, FLAT, IN STEEL, CADMIUM PLATED |
| PREN 4509 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4256 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, REDUCED SERIES WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4164 : 200P2 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4252 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, REDUCED SERIES WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4415 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - NARROW WOVEN FABRICS - TECHNICAL SPECIFICATION |
| PREN 2889 : 1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2808 : 1996 | ANODIZING OF TITANIUM AND TITANIUM ALLOYS |
| PREN 2873 : 200P2 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED UNDER VACUUM - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3207 : 1996 | AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
| PREN 3415 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, METRIC SERIES |
| PREN 3420 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, METRIC SERIES |
| 05/30129555 DC : 0 | PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 3712 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3751 : 200P3 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, CLOSED CORNER, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3843 : 200P2 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 2345-1 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, IN ALUMINIUM OR ALUMINIUM ALLOY, INCH BASED SERIES - TECHNICAL SPECIFICATION |
| PREN 4400-2 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 2: SHEET AND STRIP |
| PREN 4129 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4131 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4137 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, STEPPED SHANK, LONG THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 3857 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - ELBOWS 90 DEGREES, WELDED |
| I.S. EN 4050-1:2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS |
| XP PREN 2043 : 1998 XP | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS) |
| BS EN 3138:2001 | Aerospace series. Rivets, solid 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| BS EN 2955:1993 | Aerospace series. Recycling of titanium and titanium alloy scrap |
| BS EN 3151:1995 | Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718) |
| BS EN 3856:2002 | Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Swivel nuts for thrust wire |
| BS EN 3740:1997 | Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS EN 2647:2006 | Aerospace series. Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<sub>2</sub> lubricated. Classification: 900 MPa (at ambient temperature) / 235°C |
| BS EN 2545-1:1995 | Titanium and titanium alloy remelting stock and castings. Technical specification General requirements |
| BS EN 2556:1993 | Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series |
| BS EN 3042:1992 | Quality assurance. EN aerospace products. Qualification procedure |
| BS EN 3150:1995 | Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718) |
| BS EN 3266:2001 | Aerospace series. Pipe coupling in titanium alloy. Bulkhead nut |
| BS EN 3857:2002 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Elbows 90°, welded |
| BS EN 2912:1996 | Washers, flat, large diameter, in aluminium alloy, anodized or chromated |
| BS EN 2536:1995 | Hard anodizing of aluminium alloys |
| BS EN 2550:1993 | Rivets, solid 100° normal countersunk head, in aluminium 1050A, inch based series |
| BS EN 2070-1:1991 | Specification for aluminium and aluminium alloy wrought products. Technical specification General requirements |
| BS EN 2551:1993 | Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series |
| BS EN 2752:1990 | Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore. Classification: 1100 MPa/235°C |
| BS EN 2078:2002 | Aerospace series. Metallic materials. Manufacturing schedule, inspection schedule, inspection and test report. Definition, general principles, preparation and approval |
| BS EN 2122:1996 | Washers, flat, in aluminium alloy, anodized or chromated |
| BS EN 2146:1993 | Rivets, solid, universal head, in aluminium alloy 2017A, inch based series |
| BS EN 3230:2001 | Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated. Classificaiton: 900 MPa (at ambient temperature)/235°C |
| BS EN 3853:2002 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Straight unions, threaded |
| BS EN 2810:2001 | Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated. Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 3207:1998 | Rubber compounds. Technical specification |
| EN 2887:1995 | Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) / 425 °C |
| EN 3304:1996 | Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 2653:1996 | Aerospace series - Screws, 100° countersunk normal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
| EN 3135:1996 | Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series |
| EN 3151:1995 | Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718) |
| EN 2437:2001 | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| EN 3112:1995 | Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 °C |
| EN 2884:1996 | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 2647:2006 | Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C |
| EN 3852:2002 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded |
| EN 3381:1996 | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 2264:1996 | Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C |
| EN 3759:1996 | Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C |
| EN 2536:1995 | Aerospace series - Hard anodizing of aluminium alloys |
| EN 2886:1996 | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C |
| EN 2149:1996 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series |
| EN 3136:1996 | Aerospace series - Rivets, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series |
| EN 2143:1992 | Aerospace series - Rivets, solid, universal head, in aluminium 1050A, inch based series |
| EN 2897:1996 | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C |
| EN 2654:1996 | Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C |
| EN 3038:1996 | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C |
| EN 3307:1996 | Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 2809:2001 | Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification: 900 MPa (at ambient temperature) / 650 °C |
| EN 2553:1992 | Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series |
| EN 3854:2002 | Aerospace series - Pipe couplings, 60°, spherical in titanium alloy TI-P64001 - Ferrules, welded |
| EN 2858-1:1994 | Aerospace series - Titanium and titanium alloys - Forging stock and forgings - Technical specification - Part 1: General requirements |
| EN 2145:1994 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series |
| EN 2103-1:1991 | Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specifications - Part 1: General requirements |
| EN 3266:2001 | Aerospace series - Pipe coupling in titanium alloy - Bulkhead nuts |
| EN 3138:2001 | Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| EN 3696:2001 | Aerospace series - Washers in heat resisting steel |
| EN 3150:1995 | Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718) |
| EN 2650:1996 | Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
| EN 2556:1992 | Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series |
| EN 2652:1997 | Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235°C |
| EN 3543:1997 | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425°C |
| EN 3856:2002 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire |
| EN 4050-1:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements |
| EN 3306:1996 | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315°C |
| EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
| EN 3305:1996 | Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C |
| EN 2753:1996 | Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/235 °C |
| EN 2808:1997 | Aerospace series - Anodizing of titanium and titanium alloys |
| EN 2949:1996 | Aerospace series - Washers, wire locking, in corrosion resisting steel, passivated |
| EN 2334:1997 | Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| EN 2913:1999 | Aerospace series - Washers, flat, large diameter, in steel, cadmium plated |
| EN 3035:1996 | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C |
| EN 3769:1997 | Aerospace series - Electrolytic polishing of corrosion resisting steels and heat resisting alloys |
| EN 3141:1996 | Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, cadmium plated, inch based series |
| EN 3308:1996 | Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315°C |
| EN 2998:1996 | Aerospace series - Washers, flat, in heat resisting steel, passivated |
| EN 3267:2001 | Aerospace series - Washers, bulkhead, in titanium alloy |
| EN 2912:1996 | Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated |
| EN 3851:2003 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nuts, straight |
| EN 3760:1996 | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C |
| EN 2348:1988 | Aerospace series - Control cable assemblies - Technical specification |
| EN 3207:1998 | Aerospace series - Rubber compounds - Technical specification |
| EN 2545-1:1995 | Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 1: General requirements |
| EN 2144:1994 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series |
| EN 3142:1996 | Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series |
| EN 2413:1995 | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 2651:1996 | Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C |
| EN 3740:1996 | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 2350:1990 | Aerospace series - Circuit breakers - Technical specification |
| EN 2649:1995 | Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 °C |
| EN 2555:1992 | Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series |
| EN 3536:2006 | Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 3037:1996 | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 3079:2006 | Aerospace series - Pipe coupling 8°30' up to 28 000 kPa - Adaptors - Metric series - Technical specification |
| EN 3230:2001 | Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 °C |
| EN 2138:1999 | Aerospace series - Washers, flat, in steel, cadmium plated |
| EN 3139:2001 | Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series |
| EN 2236:1992 | Aerospace series - Pins, headed, close tolerance shank, in alloy steel - Technical specifications |
| EN 3858:2002 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA 13 |
| EN 2885:1996 | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C |
| EN 4069:1996 | Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650°C |
| EN 2552:1992 | Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series |
| EN 3853:2002 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, threaded |
| EN 3140:2001 | Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| EN 2810:2001 | Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 650 °C |
| EN 2948:1996 | Aerospace series - Washers, tab, in heat resisting steel, passivated |
| EN 3857:2002 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Elbows 90°, welded |
| EN 2122:1996 | Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated |
| EN 2157-1:1993 | Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 1: General requirements |
| EN 2146:1992 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2017A, inch based series |
| EN 2148:1992 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, inch based series |
| 01/710778 DC : 0 | PREN 3879 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION |
| 99/711592 DC : DRAFT JULY 1999 | PREN 4415 - AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - NARROW WOVEN FABRICS - TECHNICAL SPECIFICATION |
| XP PREN 3854 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL IN TITANIUM ALLOY TI-P64001 - FERRULES, WELDED |
| XP PREN 3858 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - THRUST WIRES IN STEEL FE-PA13 |
| DIN EN 3821:1996-06 (Draft) | AEROSPACE SERIES - WASHERS, CHAMFERED, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED |
| 00/717057 DC : DRAFT NOV 2000 | PREN 4199-004 - AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT, COPPER, TIN PLATED, -65 DEGREE C TO +260 DEGREE C - PART 004: PRODUCT STANDARD |
| 03/310514 DC : 0 | BS EN 4400-4 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 3853 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, THREADED |
| PREN 2882 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3078 : 200P1 | AEROSPACE SERIES - P, Q AND SADDLE CLAMPS WITH RUBBER CUSHION - TECHNICAL SPECIFICATION |
| PREN 2673 : 200P1 | AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION, RIGID LINES - MANUFACTURE |
| PREN 2337 : 200P2 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS - TECHNICAL SPECIFICATION |
| PREN 2810 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 2855 : 200P2 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, REDUCED SERIES, WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 2865 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3052 : 1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 3226 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 3822:1999-11 (Draft) | AEROSPACE SERIES - WASHERS, FLAT, THICK, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 3079 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES UP TO 28000 KPA - ADAPTORS - METRIC SERIES - TECHNICAL SPECIFICATION |
| PREN 2879 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, AIR RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN CORROSION RESISTING STEEL, PASSIVATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2878 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, AIR RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2859 : 1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2549 : 1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE SHANK, SHORT THREAD IN TITANIUM ALLOY, ANODIZED, MOS[2], LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 2852 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| PREN 2869 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 2866 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, ONE LUG, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2596 : 200P1 | AEROSPACE SERIES - WASHERS, LOCK, WITH RADIAL SERRATIONS IN CORROSION RESISTING STEEL, CADMIUM PLATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| PREN 2862 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2895 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 2923 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 2924 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, SILVER PLATED, LEFT HAND THREAD - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 2888 : 1 | AEROSPACE SERIES - BOLTS, HEXAGONAL NORMAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4400-1 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: PLATE |
| PREN 3434 : 200P4 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, SELF-LOCKING, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 3769 : 1996 | AEROSPACE SERIES - ELECTROLYTIC POLISHING OF CORROSION RESISTANT STEELS AND HEAT RESISTING ALLOYS |
| PREN 3854 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL IN TITANIUM ALLOY TI-P64001 - FERRULES, WELDED |
| PREN 3867 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGES IN TITANIUM ALLOY TI-P64001 |
| PREN 4075 : 200P1 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4499 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4155 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD WITH DOME, IN ALUMINIUM ALLOY 2219, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 4161 : 200P1 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4200 : 200P1 | AEROSPACE SERIES - WASHERS, 100 DEGREES DIMPLED, IN STEEL, CADMIUM PLATED |
| PREN 4068-001 : 200P1 | AEROSPACE SERIES - TRANSFORMER RECTIFIER UNITS FOR AIRCRAFT - TECHNICAL SPECIFICATION |
| PREN 3771 : 200P3 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, PLAIN, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3822 : 200P2 | AEROSPACE SERIES - WASHERS, FLAT, THICK, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 4251 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER WITH COUNTERBORE IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4079 : 200P2 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4154 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN ALUMINIUM ALLOY 2219, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 4419 : 200P1 | AEROSPACE SERIES - WASHERS, CHAMFERED, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED |
| PREN 4050-1 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION BARS, PLATES, FORGING STOCK AND FORGINGS - GENERAL INFORMATION |
| PREN 7001 : 200P1 | AEROSPACE SERIES - PROCESS STANDARDS - RULES FOR THE DRAFTING AND PRESENTATION OF SURFACE TREATMENT STANDARDS |
| PREN 3903 : 200P1 | AEROSPACE SERIES - WASHERS, LAMINATED, IN CORROSION RESISTING STEEL |
| PREN 4071 : 200P2 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4125 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, REDUCED SERIES, WITH INCREMENTAL COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 4136 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4082 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 2078 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - MANUFACTURING SCHEDULE, INSPECTION SCHEDULE, INSPECTION AND TEST REPORT - DEFINITION, GENERAL PRINCIPLES, PREPARATION AND APPROVAL |
| PREN 4132 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 3855 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL IN TITANIUM ALLOY TI-P64001 - CAPS |
| PREN 2345-2 : 200P2 | AEROSPACE SERIES - RIVETS, SOLID, IN ALUMINIUM OR ALUMINIUM ALLOY, METRIC SERIES - TECHNICAL SPECIFICATION |
| PREN 4400-3 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| S.R. CWA 16762:2014 | CEN WORKSHOP AGREEMENT - CEN/WS SERES - ICT STANDARDS IN SUPPORT OF AN EREPORTING FRAMEWORK FOR THE ENGINEERING MATERIALS SECTOR |
| XP PREN 4260 : 1998 XP | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS |
| NF EN 3740 : 1997 | AEROSPACE SERIES - BOLTS, SHOULDERED, THIN HEXAGONAL HEAD, CLOSE TOLERANCE SHANK, SHORT THREAD IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| DIN EN 2858-1:1994-06 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - FORGING STOCK AND FORGINGS - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS |
| DIN EN 3304:1996-11 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE SHANK, SHORT THREAD, IN TITANIUM ALLOY, MOS[2] LUBRICATED, CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| DIN EN 3303:1997-03 | AEROSPACE SERIES - SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 3759:1996-11 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| DIN EN 3307:1996-11 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| DIN EN 3141:1996-04 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN HEAD RESISTING NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES |
| DIN EN 3306:1996-09 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| DIN EN 3543:1997-03 | AEROSPACE SERIES SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| BS EN 3079:2006 | Pipe coupling 8°30\' up to 28000 kPa. Adaptors. Metric series. Technical specification |
| BS EN 2413:1995 | Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| BS EN 3140:2001 | Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| BS EN 2143:1993 | Rivets, solid, universal head, in aluminium 1050A, inch based series |
| BS EN 3854:2002 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Ferrules, welded |
| BS EN 2753:1996 | Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<sub>2</sub> lubricated. Classification. 1100 MPa (at ambient temperature) / 235°C |
| BS EN 2348:1989 | Specification for control cable assemblies. Technical specification |
| PREN 3777 : 200P1 | AEROSPACE SERIES - PINS, QUICK RELEASE, SINGLE AND DOUBLE ACTING, TECHNICAL SPECIFICATION |
| PREN 4074 : 200P1 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| TR 3040-1 : 5 | AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - PART 1 - LIST OF APPROVED MANUFACTURERS |
| ISO 3042:1992 | Cinematography — Labelling of containers for raw-stock motion-picture films and magnetic films — Minimum information specifications |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.