EN 1909:2017
Current
The latest, up-to-date edition.
Safety requirements for cableway installations designed to carry persons - Recovery and evacuation
01-25-2017
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 General requirements
6 General requirements for recovery and evacuation
7 Requirements for informing the passengers
8 Requirements for the recovery of the carriers
9 Requirements for evacuation of the passengers
10 Training and instruction of the evacuation personnel
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2000/9/EC
relating to cableway installations designed
to carry persons
Bibliography
This document specifies the safety requirements applicable to the recovery of carriers and the evacuation of passengers from cableway installations designed to carry persons, with the exception of ski-tows. This standard is applicable to various types of installations and takes into account their environment.This document establishes the requirements relating to the methods and equipment to be used to ensure the safety of passengers on cableways in the event of extended stoppage of the installation.It covers only the situation resulting from immobilization of the carriers, even if the passengers are not in immediate danger.It does not cover specific operations resulting from an accident.It includes requirements relating to the prevention of work accidents and to worker protection, without prejudice to the application of national regulations in the construction sector, of provisions of a regulatory nature, or provisions which are intended for the protection of specific groups of people.It does not apply to installations for the transportation of goods by rope or to lifts.It does not deal with design requirements for carriers.
Committee |
CEN/TC 242
|
DevelopmentNote |
Supersedes PREN 1909. (01/2017)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNI EN 1909:2017 | Identical |
I.S. EN 1909:2017 | Identical |
UNI EN 1909 : 2007 | Identical |
NS EN 1909 : 2017 | Identical |
SN EN 1909:2017 | Identical |
NEN EN 1909 : 2017 | Identical |
DIN EN 1909:2017-05 | Identical |
PN EN 1909 : 2017 | Identical |
DIN EN 1909:2013-04 (Draft) | Identical |
NBN EN 1909 : 2004 | Identical |
BS EN 1909:2017 | Identical |
NF EN 1909 : 2017 | Identical |
UNE-EN 1909:2017 | Identical |
13/30277122 DC : 0 | BS EN 12929-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS |
CEN/TR 14819-2:2005 | Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations |
I.S. EN 1709:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS |
PREN 12929-1 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS |
12/30260958 DC : 0 | BS EN 12397 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION |
PREN 12929-2 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 2: ADDITIONAL REQUIREMENTS FOR REVERSIBLE BICABLE AERIAL ROPEWAYS WITHOUT CARRIER TRUCK BRAKES |
DIN EN 13223:2015-11 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
DIN EN 12927-6:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 6: DISCARD CRITERIA |
BS EN 12927-3:2004 | Safety requirements for cableways installation designed to carry persons. Ropes. Long splicing of 6 strand hauling, carrying hauling and towing ropes |
BS EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons. General requirements Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
BS EN 13243:2015 | Safety requirements for cableway installations designed to carry persons. Electrical equipment other than for drive systems |
BS EN 12927-7:2004 | Safety requirments for cableways installations designed to carry persons. Ropes Inspection, repair and maintenance |
UNE-EN 12929-1:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
I.S. EN 12929-1:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS |
EN 12927-1:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings |
EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
DIN EN 12397:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION |
EN 12927-3:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
EN 12929-1:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
EN 12408:2004 | Safety requirements for cableway installations designed to carry persons - Quality assurance |
EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
PREN 13243 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS |
13/30277125 DC : 0 | BS EN 1908 - SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
13/30277119 DC : 0 | BS EN 12929-2 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 2: ADDITIONAL REQUIREMENTS FOR REVERSIBLE BICABLE AERIAL ROPEWAYS WITHOUT CARRIER TRUCK BRAKES |
PREN 1908 : DRAFT 2013 | SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
PREN 13107 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
I.S. EN 12927-3:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 3: LONG SPLICING OF 6 STRAND HAULING, CARRYING HAULING AND TOWING ROPES |
DIN EN 13107:2015-09 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
DIN EN 12408:2005-06 | Safety requirements for cableway installations designed to carry persons - Quality control |
DIN EN 12927-5:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION AND TENSIONING |
DIN EN 12927-7:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 7: INSPECTION, REPAIR AND MAINTENANCE |
DIN EN 12927-1:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS |
UNE-EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
UNE-EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
UNE-EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
I.S. EN 13796-1:2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
DIN EN 1908:2015-11 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
I.S. EN 12397:2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION |
I.S. EN 1908:2015 | SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
DIN EN 13796-1:2006-01 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
I.S. EN 12929-2:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 2: ADDITIONAL REQUIREMENTS FOR REVERSIBLE BICABLE AERIAL ROPEWAYS WITHOUT CARRIER TRUCK BRAKES |
I.S. EN 13223:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT |
I.S. EN 13107:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
I.S. EN 12930:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS |
DIN EN 12929-2:2015-05 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
DIN EN 12929-1:2015-05 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
I.S. EN 13243:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS |
PD CEN/TR 14819-2:2005 | Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Other funicular railways and other installations |
13/30277128 DC : 0 | BS EN 1709 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS |
13/30277110 DC : 0 | BS EN 13243 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS |
13/30275585 DC : 0 | BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
12/30260955 DC : 0 | BS EN 13796-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
PREN 12930 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS |
17/30358090 DC : 0 | BS EN 1709 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION AND INSTRUCTIONS FOR MAINTENANCE AND OPERATIONAL INSPECTION |
I.S. CEN TR 14819-2:2006 | SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 2: OTHER FUNICULAR RAILWAYS AND OTHER INSTALLATIONS |
I.S. EN 12927-4:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
I.S. EN 12927-6:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 6: DISCARD CRITERIA |
I.S. EN 12927-1:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS |
UNE-EN 12927-7:2006 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
UNE-EN 12927-6:2006 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
PREN 13796-1 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS |
PREN 13223 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT |
13/30277113 DC : 0 | BS EN 13223 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT |
PREN 1709 : DRAFT 2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION AND INSTRUCTIONS FOR MAINTENANCE AND OPERATIONAL INSPECTION |
I.S. EN 12927-7:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 7: INSPECTION, REPAIR AND MAINTENANCE |
I.S. EN 12927-5:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION AND TENSIONING |
I.S. EN 12927-2:2004 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 2: SAFETY FACTORS |
DIN EN 12397:2012-05 (Draft) | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION |
UNE-EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
BS EN 12927-1:2004 | Safety requirements for cableways installation designed to carry persons. Ropes Selection criteria for ropes and their end fixing |
BS EN 13223:2015 | Safety requirements for cableway installations designed to carry persons. Drive systems and other mechanical equipment |
BS EN 13107:2015 | Safety requirements for cableway installations designed to carry persons. Civil engineering works |
BS EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons. Ropes Safety factors |
UNE-EN 13796-1:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
UNE-EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
BS EN 12927-5:2004 | Safety requirements for cableway installations designed to carry person. Ropes Storage, transportation, installation and tensioning |
BS EN 13796-1:2005 | Safety requirements for cableway installations designed to carry persons. Carriers Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
BS EN 12397:2017 | Safety requirements for cableway installations designed to carry persons. Operation |
BS EN 1908:2015 | Safety requirements of cableway installations designed to carry persons. Tensioning devices |
BS EN 12408:2004 | Safety requirements for cableways installations designed to carry person. Quality control |
UNE-EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
DIN EN 13796-1:2012-06 (Draft) | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
EN 13796-1:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
EN 1709:2004 | Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks |
13/30277116 DC : 0 | BS EN 12930 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS |
13/30277463 DC : 0 | BS EN 12927 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES |
DIN EN 1709:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS |
BS EN 1709:2004 | Safety requirements for cableways for cableway installations designed to carry persons. Precommissioning inspection, maintenance and operational inspection and checks |
DIN EN 12927-4:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS |
DIN EN 12927-2:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 2: SAFETY FACTORS |
DIN EN 12927-3:2005-06 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 3: LONG SPLICING OF 6 STRAND HAULING, CARRYING HAULING AND TOWING ROPES |
BS EN 12927-4:2004 | Safety requirements for cableway installations designed to carry person. Ropes End fixings |
BS EN 12929-1:2015 | Safety requirements for cableway installations designed to carry persons. General requirements Requirements for all installations |
BS EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons. Ropes Discard criteria |
EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
EN 12927-5:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
EN 12927-7:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
EN 1868:1997 | Personal protective equipment against falls from a height - List of equivalent terms |
EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
EN 12277:2015 | Mountaineering equipment - Harnesses - Safety requirements and test methods |
EN 361:2002 | Personal protective equipment against falls from a height - Full body harnesses |
EN 12492:2012 | Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods |
EN 12408:2004 | Safety requirements for cableway installations designed to carry persons - Quality assurance |
EN 1496:2017 | Personal fall protection equipment - Rescue lifting devices |
EN 353-2:2002 | Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line |
EN 358:1999 | Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards |
EN 564:2014 | Mountaineering equipment - Accessory cord - Safety requirements and test methods |
EN 354:2010 | Personal fall protection equipment - Lanyards |
EN 1497:2007 | Personal fall protection equipment - Rescue harnesses |
EN 360:2002 | Personal protective equipment against falls from a height - Retractable type fall arresters |
EN 892:2012+A1:2016 | Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods |
EN 341:2011 | Personal fall protection equipment - Descender devices for rescue |
EN 355:2002 | Personal protective equipment against falls from a height - Energy absorbers |
2000/9/EC : 2000 | DIRECTIVE 2000/9/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 20 MARCH 2000 RELATING TO CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS |
EN 60268-5:2003/A1:2009 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
EN 1709:2004 | Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks |
EN 567:2013 | Mountaineering equipment - Rope clamps - Safety requirements and test methods |
EN 566:2017 | Mountaineering equipment - Slings - Safety requirements and test methods |
EN 565:2017 | Mountaineering equipment - Tape - Safety requirements and test methods |
EN 363:2008 | Personal fall protection equipment - Personal fall protection systems |
EN 12278:2007 | Montaineering equipment - Pulleys - Safety requirements and test methods |
EN 813:2008 | Personal fall protection equipment - Sit harnesses |
EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
EN 1891:1998 | Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes |
EN 362:2004 | Personal protective equipment against falls from a height - Connectors |
EN 795:2012 | Personal fall protection equipment - Anchor devices |
EN 12275:2013 | Mountaineering equipment - Connectors - Safety requirements and test methods |
EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
EN 1498:2006 | Personal fall protection equipment - Rescue loops |
IEC 60268-5:2003+AMD1:2007 CSV | Sound system equipment - Part 5: Loudspeakers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.