EN 1835 : 1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
04-01-2005
01-12-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Description
5 Classification
6 Designation
7 Requirements
7.1 Materials
7.2 Resistance to temperature
7.3 Flammability
7.4 Cleaning and disinfecting
7.5 Body harness or belt
7.6 Connectors
7.7 Breathing hose
7.8 Continuous flow valve
7.9 Checking and warning facilities
7.10 Compressed air supply tube
7.11 Helmets and hoods
7.12 Adjustable parts
7.13 Noise level inside helmet or hood
7.14 Carbon dioxide content of the inhalation air
7.15 Breathing resistance
7.16 Leaktightness
7.17 Inward leakage
7.18 Practical performance
8 Testing
8.1 General
8.2 Visual inspection
8.3 Resistance to temperature
8.4 Flammability
8.5 Mechanical resistance of eyepiece(s) or visor(s)
8.6 Strength of attachment of exhalation valve
8.7 Breathing resistance
8.8 Inward leakage
8.9 Strength of connections to helmet/hood and waist
belt or body harness
8.10 Effective mass supported by the facepiece
8.11 Strength of compressed air supply tube, couplings
and continuous flow valve
8.12 Resistance to kinking of the compressed air
supply tube
8.13 Resistance to collapse of compressed air supply
tube
8.14 Leaktightness
8.15 Heat resistance of compressed air supply tube
8.16 Resistance to collapse of breathing hose
8.17 Air supply flow rate
8.18 Checking and warning facilities
8.19 Carbon dioxide content of the inhalation air
8.20 Noise level inside helmet or hood
8.21 Air porosity
8.22 Practical performance
9 Marking
10 Information to be supplied by the manufacturer
Annex A (normative) Fitting procedure for hoods which seal
around the neck and which may or may not
incorporate a head harness
Annex B (informative) Marking of components
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or
other provisions of EU Directives
Gives minimum requirements for light duty construction compressed air line breathing apparatus, having helmets or hoods, for using in particulate, gaseous or combined contaminated atmospheres. This equipment is meant for use in situations where risk of damage to the compressed air supply tube is low and where the wearer's movements are restricted. Diving and escape apparatus and that used in abrasive blasting conditions are not included. Covers laboratory tests and practical performance tests for assessment of compliance with the requirements.
| Committee |
TC 79
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| BS EN 1835:2000 | Identical |
| I.S. EN 1835:2000 | Identical |
| NS EN 1835 : 1ED 2000 | Identical |
| NBN EN 1835 : 2000 | Identical |
| NEN EN 1835 : 1999 | Identical |
| SN EN 1835 : 2000 | Identical |
| UNI EN 1835 : 2001 | Identical |
| UNE-EN 1835:2000 | Identical |
| NF EN 1835 : 2000 | Identical |
| DIN EN 1835:2000-04 | Identical |
| EN 133:2001 | Respiratory protective devices - Classification |
| 03/112290 DC : DRAFT AUG 2003 | BS EN 529 - RESPIRATORY PROTECTIVE DEVICES - RECOMMENDATIONS FOR SELECTION, USE, CARE AND MAINTENANCE - GUIDANCE DOCUMENT |
| BS EN 133:2001 | Respiratory protective devices. Classification |
| I.S. EN 133:2002 | RESPIRATORY PROTECTIVE DEVICES - CLASSIFICATION |
| BS 4275:1997 | Guide to implementing an effective respiratory protective device programme |
| BS EN 529:2005 | Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document |
| EN 529:2005 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
| DIN EN 133:2002-02 | RESPIRATORY PROTECTIVE DEVICES - CLASSIFICATION |
| DIN EN 529:2006-01 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
| EN 148-3:1999 | Respiratory protective devices - Threads for facepieces - Part 3: Tread connection M 45 x 3 |
| EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
| EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
| EN 134:1998 | Respiratory protective devices - Nomenclature of components |
| EN 28031 : 1993 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE |
| EN 148-2:1999 | Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection |
| ISO 6941:2003 | Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens |
| IEC 60651:1979+AMD1:1993+AMD2:2000 CSV | Sound level meters |
| EN 142:2002 | Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.