EN 16927:2017
Current
The latest, up-to-date edition.
Mini-pools - Specific requirements including safety and test methods for mini-pools
02-22-2017
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and test methods
5 Instructions for the consumer
Annex A (informative) - Examples of mini-pool
dimensions
Annex B (informative) - Safety information in the
owner's manual and instruction sheets
accompanying the mini-pool
Annex C (normative) - Methods of test for
entrapment
Bibliography
This European Standard specifies the general safety and quality requirements and test methods for domestic mini-pools.These requirements and test methods are applicable to mini-pool structures, including their installation and possible means of access.This European Standard does not apply to:-pools for public use covered by EN 15288-1;-swimming pools for domestic use covered by EN 16582 series;-spas for domestic or public use;-paddling pools according to EN 71-8
| Committee |
CEN/TC 402
|
| DevelopmentNote |
Supersedes PREN 16927. (02/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 16927 : 2017 | Identical |
| PN EN 16927 : 2017 | Identical |
| UNE-EN 16927:2017 | Identical |
| DIN EN 16927:2015-10 (Draft) | Identical |
| I.S. EN 16927:2017 | Identical |
| NF EN 16927 : 2017 | Identical |
| NS EN 16927 : 2017 | Identical |
| DIN EN 16927 E : 2017 | Identical |
| UNI EN 16927 : 2017 | Identical |
| SN EN 16927 : 2017 | Identical |
| BS EN 16927:2017 | Identical |
| DIN EN 16927:2017-05 | Identical |
| 17/30358108 DC : 0 | BS EN 17125 - DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 71-8:2018 | Safety of toys - Part 8: Activity toys for domestic use |
| PREN 17125 : DRAFT 2017 | DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 71-8:2018 | Safety of toys Activity toys for domestic use |
| I.S. EN 71-8:2018 | SAFETY OF TOYS - PART 8: ACTIVITY TOYS FOR DOMESTIC USE |
| HD 60364-7-702:2010 | Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
| EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| DIN 18202:2013-04 | TOLERANCES IN BUILDING CONSTRUCTION - BUILDINGS |
| EN 335:2013 | Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products |
| EN 351-1:2007 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| EN ISO 4674-2:1998 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998) |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| 1988/378/EEC : 1988 | COUNCIL DIRECTIVE OF 3 MAY 1988 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING THE SAFETY OF TOYS |
| UNE 53955:2002 EX | Plastics. Prefabricated swimming pools made from fiber glass reinforced plastics (GRP). Characteristics ant test methods. |
| EN 16713-3:2016 | Domestic swimming pools - Water systems - Part 3: Water treatment - Requirements |
| EN 14843:2007 | Precast concrete products - Stairs |
| ISO 4628-3:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
| EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| EN ISO 4628-3:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
| ISO 4674-2:1998 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 2: Ballistic pendulum method |
| EN 71-1:2014 | Safety of toys - Part 1: Mechanical and physical properties |
| EN 13451-1:2011+A1:2016 | Swimming pool equipment - Part 1: General safety requirements and test methods |
| EN ISO 2411:2017 | Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) |
| EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| EN 1875-3:1997 | Rubber- or plastics- coated fabrics - Determination of tear strength - Part 3: Trapezoidal method |
| EN 460:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 350:2016 | Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| CEN/CLC Guide 11:2012 | Product information relevant to consumers - Guidelines for standard developers |
| NFP 90 303 : 2002 AMD 1 2003 | SMALL SWIMMING POOLS - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 20712-1:2008 | Water safety signs and beach safety flags Part 1: Specifications for water safety signs used in workplaces and public areas |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.