EN 1677-5:2001+A1:2008
Current
Current
The latest, up-to-date edition.
Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4
Published date
11-12-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements
6 Verification of safety requirements
7 Marking
8 Manufacturer's certificate
9 Instructions for use
Annex A (informative) - Bases for the calculation of hook
dimensions
Annex B (informative) - Designation system for hooks - Grade 4
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
This Part of EN 1677 specifies requirements for forged steel lifting hooks of grade 4 having latch and eye up to 31,5 t WLL, mainly for use in:-chain slings according to EN 818-5-steel wire rope slings according to prEN 13414-1:1998-textile slings according to EN 1492-1, EN 1492-2.intended for lifting objects, materials or goods.This Part of EN 1677 does not apply to hand forged hooks.The hazards covered by this Part of EN 1677 are identified in clause 4.Annex A gives the bases for calculation of hook dimensions.Annex B gives an example of a designation system for hooks of grade 4.
| Committee |
CEN/TC 168
|
| DevelopmentNote |
2001 Edition Re-Issued in November 2008 & incorporates AMD 1 2008. (01/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 1677-5 : 2001 | Identical |
| NBN EN 1677-5 : 2001 + A1 2009 | Identical |
| DIN EN 1677-5:2009-03 | Identical |
| PN EN 1677-5 : 2004 + A1 2009 | Identical |
| UNE-EN 1677-5:2002+A1:2009 | Identical |
| NF EN 1677-5 : 2001 + A1 2009 | Identical |
| UNI EN 1677-5 : 2009 | Identical |
| SN EN 1677-5 : 2001 + A1 2009 | Identical |
| UNE-EN 1677-5:2002 | Identical |
| I.S. EN 1677-5:2001 | Identical |
| NS EN 1677-5 : 2001 + A1 2008 | Identical |
| NEN EN 1677-5 : 2001 + A1 2008 | Identical |
| BS EN 1677-5:2001+A1:2008 | Equivalent |
| GOST R EN 818-5 : 2005 | SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS OF GRADE 4 |
| 13/30280057 DC : 0 | BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY |
| BS EN 13414-2 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| BS EN 1492-4 : 2004 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| I.S. EN 13414-2:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| DIN EN 13414-2:2009-02 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| DIN EN 13414-1:2009-02 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| EN 12195-4:2003 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| EN 13414-1:2003+A2:2008 | Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
| 17/30357386 DC : 0 | BS EN 13001-3-5 AMD 1 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED AND CAST HOOKS |
| PREN 13155 : DRAFT 2017 | CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS |
| NF EN 13071-3 : 2011 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
| DIN EN 1492-4:2009-02 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| DIN EN 13157:2010-07 | Cranes - Safety - Hand powered cranes (includes Amendment A1:2009) |
| DIN EN 12195-4:2004-04 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| BS EN 13414-1 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 13414-1:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 818-6:2000 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| I.S. EN 1492-4:2004 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| I.S. EN 818-5:1999 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| EN 13001-3-5:2016 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| UNE-EN 13071-3:2012 | Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections |
| I.S. EN 13071-3:2011 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
| UNI EN 13071-3 : 2011 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
| DIN EN 818-5:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| UNI EN 13414-2 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN 818-6 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN 13157 : 2009 | CRANES - SAFETY - HAND POWERED CRANES |
| UNI EN 13414-1 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| UNI EN 1492-4 : 2009 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| UNI EN 818-5 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| DIN EN 13071-3:2011-12 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
| 10/30212165 DC : 0 | BS EN 13071-3 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
| EEMUA 101 : 2013 | LIFTING POINTS - A DESIGN GUIDE |
| DIN EN 818-6:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| BS EN 12195-4:2003 | Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes |
| BS EN 818-5 : 1999 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 |
| EN 1492-4:2004+A1:2008 | Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
| EN 818-6:2000+A1:2008 | Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
| EN 818-5:1999+A1:2008 | Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 |
| BS EN 13001-3-5:2016 | Cranes. General design Limit states and proof of competence of forged hooks |
| BS EN 13071-3:2011 | Stationary waste containers up to 5000 l, top lifted and bottom emptied Recommended lifting connections |
| 17/30360261 DC : 0 | BS EN 13135 - CRANE - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| BS EN 818-6 : 2000 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| EN 13071-3:2011 | Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections |
| EN 13414-2:2003+A2:2008 | Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
| EN 818-5:1999+A1:2008 | Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| EN 10002-2 : 1991 | METALLIC MATERIALS - TENSILE TESTING - PART 2: VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINE |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| EN 1492-2:2000+A1:2008 | Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 818-6:2000+A1:2008 | Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
| EN 1492-1:2000+A1:2008 | Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| PREN 13414-1 : DRAFT 1998 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: WIRE ROPE SLINGS |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.