EN 1677-1:2000+A1:2008
Current
Current
The latest, up-to-date edition.
Components for slings - Safety - Part 1: Forged steel components, Grade 8
Published date
11-12-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and Definitions
4 Hazards
5 Safety requirements
6 Verification of safety requirements
7 Marking
8 Manufacturer's certificate
9 Instructions for use
Annex A (informative) - Calculation of mechanical properties
Annex B (informative) - Designation system for forged steel
components - Grade 8
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
This Part of EN 1677 specifies general requirements for forged steel components of grade 8 up to 63 t WLL, mainly for use in:-chain slings according to EN 818-4;-steel wire rope slings according to prEN 13414-1:1999;-textile slings according to EN 1492-1:2000, EN 1492-2:2000 intended for lifting objects, materials or goods.This standard does not apply to hand forged components and welded links, nor to other welded components.The hazards covered by this Part of EN 1677 are identified in clause 4.Annex A is informative, and gives the bases for calculation of tabulated values of mechanical properties.Annex B is informative, and gives an example of a designation system for forged steel lifting components of grade 8.Annex ZA gives the relationship with EU-Directives.
| Committee |
CEN/TC 168
|
| DevelopmentNote |
2000 Edition Re-Issued in November 2008 & incorporates AMD 1 2008. (01/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 1677-1:2001 | Identical |
| NBN EN 1677-1 : 2000 + A1 2009 | Identical |
| NEN EN 1677-1 : 2000 + A1 2008 | Identical |
| NS EN 1677-1 : 2000 + A1 2008 | Identical |
| I.S. EN 1677-1:2000 | Identical |
| PN EN 1677-1 : 2004 + A1 2009 | Identical |
| SN EN 1677-1 : 2000 + A1 2009 | Identical |
| UNI EN 1677-1 : 2009 | Identical |
| BS EN 1677-1 : 2000 | Identical |
| DIN EN 1677-1:2009-03 | Identical |
| NF EN 1677-1 : 2000 + A1 2009 | Identical |
| UNE-EN 1677-1:2001+A1:2009 | Identical |
| BS EN 1677-1:2000+A1:2008 | Identical |
| DIN EN 13071-3:2011-12 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
| BS EN 13414-2 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| BS EN 1492-4 : 2004 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| I.S. EN 13414-2:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| DIN EN 13414-2:2009-02 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| DIN EN 13411-5:2009-02 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| DIN EN 13414-1:2009-02 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| EN 12195-4:2003 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| EN 12195-3:2001 | Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains |
| EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
| EN 13414-1:2003+A2:2008 | Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
| PREN 13155 : DRAFT 2017 | CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS |
| EN 12079-2:2006 | Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking |
| NF EN 13071-3 : 2011 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
| DIN EN 1492-4:2009-02 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| DIN EN 12195-4:2004-04 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| BS EN 13414-1 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| BS EN 474-9 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS |
| I.S. EN 13414-1:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 1677-2:2000 | COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8 |
| I.S. EN 1677-3:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8 |
| I.S. EN 818-6:2000 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| I.S. EN 1492-4:2004 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| I.S. EN 474-9:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS |
| I.S. EN 818-4:1997 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| I.S. EN 13411-5:2003 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| VDI 2700 Blatt 19:2011-01 | Securing of loads on road vehicles - Rolled steel strip, sheets, and section steel |
| UNE-EN 13071-3:2012 | Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections |
| I.S. EN 13071-3:2011 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
| UNI EN 13071-3 : 2011 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
| DIN EN 1677-2:2008-06 | COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8 |
| DIN EN 1677-3:2008-06 | COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS, GRADE 8 |
| DIN EN 474-9:2010-04 | Earth-moving machinery - Safety - Part 9: Requirements for pipelayers (includes Amendment A1:2009) |
| BS EN 12195-3:2001 | Load restraint assemblies on road vehicles. Safety Lashing chains |
| BS EN 1677-3 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8 |
| BS EN 12079-2:2006 | Offshore containers and associated lifting sets Lifting sets. Design, manufacture and marking |
| UNI EN 818-4 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| UNI EN 13414-2 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN 1677-3 : 2008 | COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8 |
| UNI EN 13411-5 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| UNI EN 818-6 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN 13414-1 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| UNI EN 474-9 : 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS |
| UNI EN 1492-4 : 2009 | TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES |
| UNI EN 1677-2 : 2008 | COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8 |
| PREN 474-9 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS |
| I.S. EN 12079-2:2006 | OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING |
| 15/30331863 DC : 0 | BS EN ISO 10855-2 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING |
| 10/30212165 DC : 0 | BS EN 13071-3 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS |
| ISO 10855-2:2018 | Offshore containers and associated lifting sets Part 2: Design, manufacture and marking of lifting sets |
| DIN EN 818-6:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| BS EN 13411-5 : 2003 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| BS EN 818-4 : 1997 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| BS EN 12195-4:2003 | Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes |
| EN 818-6:2000+A1:2008 | Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
| EN 1492-4:2004+A1:2008 | Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
| EN 1677-3:2001+A1:2008 | Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8 |
| EN 818-4:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 |
| EN 474-9:2006+A1:2009 | Earth-moving machinery - Safety - Part 9: Requirements for pipelayers |
| EN 1677-2:2000+A1:2008 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 |
| 07/30163493 DC : 0 | BS ISO 20474-9 - EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS |
| BS EN 13071-3:2011 | Stationary waste containers up to 5000 l, top lifted and bottom emptied Recommended lifting connections |
| 17/30360261 DC : 0 | BS EN 13135 - CRANE - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| GOST R EN 818-4 : 2005 | SHORT LINK CHAINS FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS GRADE 8 |
| BS EN 1677-2 : 2000 | COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8 |
| BS EN 818-6 : 2000 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER |
| EN 13071-3:2011 | Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections |
| EN 13414-2:2003+A2:2008 | Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
| DIN EN 818-4:2008-12 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8 |
| EN 10002-2 : 1991 | METALLIC MATERIALS - TENSILE TESTING - PART 2: VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINE |
| EN 10228-2:2016 | Non-destructive testing of steel forgings - Part 2: Penetrant testing |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| EN 10228-1:1999 | Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
| EN 818-4:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 |
| EN 1492-2:2000+A1:2008 | Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 818-6:2000+A1:2008 | Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
| EN 1492-1:2000+A1:2008 | Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| PREN 13414-1 : DRAFT 1998 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: WIRE ROPE SLINGS |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.