EN 15814:2011+A2:2014
Current
The latest, up-to-date edition.
Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements
12-17-2014
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Assessment and verification of the
constancy of performance - AVCP
6 Marking, labelling and packaging
Annex A (normative) - Reaction to fire - Specifications
for mounting specimens in the test rigs
Annex ZA (informative) - Clauses of this European
Standard addressing provisions of the EU
Construction Products Regulation (CPR)
Bibliography
This European Standard specifies the definitions and requirements of prefabricated polymer modified bituminous thick coatings used for the waterproofing of below ground structures. It applies to both one-component and two-component products. These products can be used with or without inlay.This European Standard does not apply to products that are to be used for roof waterproofing.
| Committee |
CEN/TC 361
|
| DevelopmentNote |
2011 Edition Re-Issued in December 2014 & incorporates AMD 2 2014. (01/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN 15814:2015 | Identical |
| NBN EN 15814 : 2011 + A2 2015 | Identical |
| PN EN 15814 : 2011 + A2 2015 | Identical |
| NEN EN 15814 : 2011 + A2 2014 | Identical |
| NF EN 15814 : 2011 + A2 2015 | Identical |
| SN EN 15814 : 2011 + A2 2014 | Identical |
| NS EN 15814 : 2011 + A2 2014 | Identical |
| I.S. EN 15814:2011 | Identical |
| BS EN 15814 : 2011 | Identical |
| UNI EN 15814 : 2013 | Identical |
| DIN EN 15814:2015-03 | Identical |
| UNE-EN 15814:2011 | Identical |
| UNE-EN 15814:2011+A2:2017 | Identical |
| BS EN 15814:2011+A2:2014 | Identical |
| NF EN 15815 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION |
| NF EN 15818 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF DIMENSIONAL STABILITY AT HIGH TEMPERATURE |
| NF EN 15816 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN |
| NF EN 15817 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - WATER RESISTANCE |
| NF EN 15812 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
| NF EN 15813 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURES |
| NF EN 15820 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF WATERTIGHTNESS |
| EN 15817:2011 | Polymer modified bituminous thick coatings for waterproofing - Water resistance |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| EN 15813:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures |
| ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
| EN 459-2:2010 | Building lime - Part 2: Test methods |
| 305/2011 : 2011 AMD 2 2014 | REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE) |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN ISO 3451-1:2008 | Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008) |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 15818:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| EN 15812:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
| EN 15816:2011 | Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 15819:2011 | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
| EN 15820:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness |
| EN 15815:2011 | Polymer modified bituminous thick coatings for waterproofing - Resistance to compression |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 3923-1:2008 | Metallic powders Determination of apparent density Part 1: Funnel method |
| EN ISO 3923-1:2010 | Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008) |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.